1 /* 2 * adutux - driver for ADU devices from Ontrak Control Systems 3 * This is an experimental driver. Use at your own risk. 4 * This driver is not supported by Ontrak Control Systems. 5 * 6 * Copyright (c) 2003 John Homppi (SCO, leave this notice here) 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * derived from the Lego USB Tower driver 0.56: 14 * Copyright (c) 2003 David Glance <davidgsf@sourceforge.net> 15 * 2001 Juergen Stuber <stuber@loria.fr> 16 * that was derived from USB Skeleton driver - 0.5 17 * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com) 18 * 19 */ 20 21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 22 23 #include <linux/kernel.h> 24 #include <linux/sched/signal.h> 25 #include <linux/errno.h> 26 #include <linux/slab.h> 27 #include <linux/module.h> 28 #include <linux/usb.h> 29 #include <linux/mutex.h> 30 #include <linux/uaccess.h> 31 32 /* Version Information */ 33 #define DRIVER_VERSION "v0.0.13" 34 #define DRIVER_AUTHOR "John Homppi" 35 #define DRIVER_DESC "adutux (see www.ontrak.net)" 36 37 /* Define these values to match your device */ 38 #define ADU_VENDOR_ID 0x0a07 39 #define ADU_PRODUCT_ID 0x0064 40 41 /* table of devices that work with this driver */ 42 static const struct usb_device_id device_table[] = { 43 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID) }, /* ADU100 */ 44 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) }, /* ADU120 */ 45 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) }, /* ADU130 */ 46 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+100) }, /* ADU200 */ 47 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+108) }, /* ADU208 */ 48 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+118) }, /* ADU218 */ 49 { } /* Terminating entry */ 50 }; 51 52 MODULE_DEVICE_TABLE(usb, device_table); 53 54 #ifdef CONFIG_USB_DYNAMIC_MINORS 55 #define ADU_MINOR_BASE 0 56 #else 57 #define ADU_MINOR_BASE 67 58 #endif 59 60 /* we can have up to this number of device plugged in at once */ 61 #define MAX_DEVICES 16 62 63 #define COMMAND_TIMEOUT (2*HZ) /* 60 second timeout for a command */ 64 65 /* 66 * The locking scheme is a vanilla 3-lock: 67 * adu_device.buflock: A spinlock, covers what IRQs touch. 68 * adutux_mutex: A Static lock to cover open_count. It would also cover 69 * any globals, but we don't have them in 2.6. 70 * adu_device.mtx: A mutex to hold across sleepers like copy_from_user. 71 * It covers all of adu_device, except the open_count 72 * and what .buflock covers. 73 */ 74 75 /* Structure to hold all of our device specific stuff */ 76 struct adu_device { 77 struct mutex mtx; 78 struct usb_device *udev; /* save off the usb device pointer */ 79 struct usb_interface *interface; 80 unsigned int minor; /* the starting minor number for this device */ 81 char serial_number[8]; 82 83 int open_count; /* number of times this port has been opened */ 84 85 char *read_buffer_primary; 86 int read_buffer_length; 87 char *read_buffer_secondary; 88 int secondary_head; 89 int secondary_tail; 90 spinlock_t buflock; 91 92 wait_queue_head_t read_wait; 93 wait_queue_head_t write_wait; 94 95 char *interrupt_in_buffer; 96 struct usb_endpoint_descriptor *interrupt_in_endpoint; 97 struct urb *interrupt_in_urb; 98 int read_urb_finished; 99 100 char *interrupt_out_buffer; 101 struct usb_endpoint_descriptor *interrupt_out_endpoint; 102 struct urb *interrupt_out_urb; 103 int out_urb_finished; 104 }; 105 106 static DEFINE_MUTEX(adutux_mutex); 107 108 static struct usb_driver adu_driver; 109 110 static inline void adu_debug_data(struct device *dev, const char *function, 111 int size, const unsigned char *data) 112 { 113 dev_dbg(dev, "%s - length = %d, data = %*ph\n", 114 function, size, size, data); 115 } 116 117 /** 118 * adu_abort_transfers 119 * aborts transfers and frees associated data structures 120 */ 121 static void adu_abort_transfers(struct adu_device *dev) 122 { 123 unsigned long flags; 124 125 if (dev->udev == NULL) 126 return; 127 128 /* shutdown transfer */ 129 130 /* XXX Anchor these instead */ 131 spin_lock_irqsave(&dev->buflock, flags); 132 if (!dev->read_urb_finished) { 133 spin_unlock_irqrestore(&dev->buflock, flags); 134 usb_kill_urb(dev->interrupt_in_urb); 135 } else 136 spin_unlock_irqrestore(&dev->buflock, flags); 137 138 spin_lock_irqsave(&dev->buflock, flags); 139 if (!dev->out_urb_finished) { 140 spin_unlock_irqrestore(&dev->buflock, flags); 141 usb_kill_urb(dev->interrupt_out_urb); 142 } else 143 spin_unlock_irqrestore(&dev->buflock, flags); 144 } 145 146 static void adu_delete(struct adu_device *dev) 147 { 148 /* free data structures */ 149 usb_free_urb(dev->interrupt_in_urb); 150 usb_free_urb(dev->interrupt_out_urb); 151 kfree(dev->read_buffer_primary); 152 kfree(dev->read_buffer_secondary); 153 kfree(dev->interrupt_in_buffer); 154 kfree(dev->interrupt_out_buffer); 155 kfree(dev); 156 } 157 158 static void adu_interrupt_in_callback(struct urb *urb) 159 { 160 struct adu_device *dev = urb->context; 161 int status = urb->status; 162 163 adu_debug_data(&dev->udev->dev, __func__, 164 urb->actual_length, urb->transfer_buffer); 165 166 spin_lock(&dev->buflock); 167 168 if (status != 0) { 169 if ((status != -ENOENT) && (status != -ECONNRESET) && 170 (status != -ESHUTDOWN)) { 171 dev_dbg(&dev->udev->dev, 172 "%s : nonzero status received: %d\n", 173 __func__, status); 174 } 175 goto exit; 176 } 177 178 if (urb->actual_length > 0 && dev->interrupt_in_buffer[0] != 0x00) { 179 if (dev->read_buffer_length < 180 (4 * usb_endpoint_maxp(dev->interrupt_in_endpoint)) - 181 (urb->actual_length)) { 182 memcpy (dev->read_buffer_primary + 183 dev->read_buffer_length, 184 dev->interrupt_in_buffer, urb->actual_length); 185 186 dev->read_buffer_length += urb->actual_length; 187 dev_dbg(&dev->udev->dev,"%s reading %d\n", __func__, 188 urb->actual_length); 189 } else { 190 dev_dbg(&dev->udev->dev,"%s : read_buffer overflow\n", 191 __func__); 192 } 193 } 194 195 exit: 196 dev->read_urb_finished = 1; 197 spin_unlock(&dev->buflock); 198 /* always wake up so we recover from errors */ 199 wake_up_interruptible(&dev->read_wait); 200 } 201 202 static void adu_interrupt_out_callback(struct urb *urb) 203 { 204 struct adu_device *dev = urb->context; 205 int status = urb->status; 206 207 adu_debug_data(&dev->udev->dev, __func__, 208 urb->actual_length, urb->transfer_buffer); 209 210 if (status != 0) { 211 if ((status != -ENOENT) && 212 (status != -ECONNRESET)) { 213 dev_dbg(&dev->udev->dev, 214 "%s :nonzero status received: %d\n", __func__, 215 status); 216 } 217 return; 218 } 219 220 spin_lock(&dev->buflock); 221 dev->out_urb_finished = 1; 222 wake_up(&dev->write_wait); 223 spin_unlock(&dev->buflock); 224 } 225 226 static int adu_open(struct inode *inode, struct file *file) 227 { 228 struct adu_device *dev = NULL; 229 struct usb_interface *interface; 230 int subminor; 231 int retval; 232 233 subminor = iminor(inode); 234 235 retval = mutex_lock_interruptible(&adutux_mutex); 236 if (retval) 237 goto exit_no_lock; 238 239 interface = usb_find_interface(&adu_driver, subminor); 240 if (!interface) { 241 pr_err("%s - error, can't find device for minor %d\n", 242 __func__, subminor); 243 retval = -ENODEV; 244 goto exit_no_device; 245 } 246 247 dev = usb_get_intfdata(interface); 248 if (!dev || !dev->udev) { 249 retval = -ENODEV; 250 goto exit_no_device; 251 } 252 253 /* check that nobody else is using the device */ 254 if (dev->open_count) { 255 retval = -EBUSY; 256 goto exit_no_device; 257 } 258 259 ++dev->open_count; 260 dev_dbg(&dev->udev->dev, "%s: open count %d\n", __func__, 261 dev->open_count); 262 263 /* save device in the file's private structure */ 264 file->private_data = dev; 265 266 /* initialize in direction */ 267 dev->read_buffer_length = 0; 268 269 /* fixup first read by having urb waiting for it */ 270 usb_fill_int_urb(dev->interrupt_in_urb, dev->udev, 271 usb_rcvintpipe(dev->udev, 272 dev->interrupt_in_endpoint->bEndpointAddress), 273 dev->interrupt_in_buffer, 274 usb_endpoint_maxp(dev->interrupt_in_endpoint), 275 adu_interrupt_in_callback, dev, 276 dev->interrupt_in_endpoint->bInterval); 277 dev->read_urb_finished = 0; 278 if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL)) 279 dev->read_urb_finished = 1; 280 /* we ignore failure */ 281 /* end of fixup for first read */ 282 283 /* initialize out direction */ 284 dev->out_urb_finished = 1; 285 286 retval = 0; 287 288 exit_no_device: 289 mutex_unlock(&adutux_mutex); 290 exit_no_lock: 291 return retval; 292 } 293 294 static void adu_release_internal(struct adu_device *dev) 295 { 296 /* decrement our usage count for the device */ 297 --dev->open_count; 298 dev_dbg(&dev->udev->dev, "%s : open count %d\n", __func__, 299 dev->open_count); 300 if (dev->open_count <= 0) { 301 adu_abort_transfers(dev); 302 dev->open_count = 0; 303 } 304 } 305 306 static int adu_release(struct inode *inode, struct file *file) 307 { 308 struct adu_device *dev; 309 int retval = 0; 310 311 if (file == NULL) { 312 retval = -ENODEV; 313 goto exit; 314 } 315 316 dev = file->private_data; 317 if (dev == NULL) { 318 retval = -ENODEV; 319 goto exit; 320 } 321 322 mutex_lock(&adutux_mutex); /* not interruptible */ 323 324 if (dev->open_count <= 0) { 325 dev_dbg(&dev->udev->dev, "%s : device not opened\n", __func__); 326 retval = -ENODEV; 327 goto unlock; 328 } 329 330 adu_release_internal(dev); 331 if (dev->udev == NULL) { 332 /* the device was unplugged before the file was released */ 333 if (!dev->open_count) /* ... and we're the last user */ 334 adu_delete(dev); 335 } 336 unlock: 337 mutex_unlock(&adutux_mutex); 338 exit: 339 return retval; 340 } 341 342 static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, 343 loff_t *ppos) 344 { 345 struct adu_device *dev; 346 size_t bytes_read = 0; 347 size_t bytes_to_read = count; 348 int i; 349 int retval = 0; 350 int timeout = 0; 351 int should_submit = 0; 352 unsigned long flags; 353 DECLARE_WAITQUEUE(wait, current); 354 355 dev = file->private_data; 356 if (mutex_lock_interruptible(&dev->mtx)) 357 return -ERESTARTSYS; 358 359 /* verify that the device wasn't unplugged */ 360 if (dev->udev == NULL) { 361 retval = -ENODEV; 362 pr_err("No device or device unplugged %d\n", retval); 363 goto exit; 364 } 365 366 /* verify that some data was requested */ 367 if (count == 0) { 368 dev_dbg(&dev->udev->dev, "%s : read request of 0 bytes\n", 369 __func__); 370 goto exit; 371 } 372 373 timeout = COMMAND_TIMEOUT; 374 dev_dbg(&dev->udev->dev, "%s : about to start looping\n", __func__); 375 while (bytes_to_read) { 376 int data_in_secondary = dev->secondary_tail - dev->secondary_head; 377 dev_dbg(&dev->udev->dev, 378 "%s : while, data_in_secondary=%d, status=%d\n", 379 __func__, data_in_secondary, 380 dev->interrupt_in_urb->status); 381 382 if (data_in_secondary) { 383 /* drain secondary buffer */ 384 int amount = bytes_to_read < data_in_secondary ? bytes_to_read : data_in_secondary; 385 i = copy_to_user(buffer, dev->read_buffer_secondary+dev->secondary_head, amount); 386 if (i) { 387 retval = -EFAULT; 388 goto exit; 389 } 390 dev->secondary_head += (amount - i); 391 bytes_read += (amount - i); 392 bytes_to_read -= (amount - i); 393 } else { 394 /* we check the primary buffer */ 395 spin_lock_irqsave (&dev->buflock, flags); 396 if (dev->read_buffer_length) { 397 /* we secure access to the primary */ 398 char *tmp; 399 dev_dbg(&dev->udev->dev, 400 "%s : swap, read_buffer_length = %d\n", 401 __func__, dev->read_buffer_length); 402 tmp = dev->read_buffer_secondary; 403 dev->read_buffer_secondary = dev->read_buffer_primary; 404 dev->read_buffer_primary = tmp; 405 dev->secondary_head = 0; 406 dev->secondary_tail = dev->read_buffer_length; 407 dev->read_buffer_length = 0; 408 spin_unlock_irqrestore(&dev->buflock, flags); 409 /* we have a free buffer so use it */ 410 should_submit = 1; 411 } else { 412 /* even the primary was empty - we may need to do IO */ 413 if (!dev->read_urb_finished) { 414 /* somebody is doing IO */ 415 spin_unlock_irqrestore(&dev->buflock, flags); 416 dev_dbg(&dev->udev->dev, 417 "%s : submitted already\n", 418 __func__); 419 } else { 420 /* we must initiate input */ 421 dev_dbg(&dev->udev->dev, 422 "%s : initiate input\n", 423 __func__); 424 dev->read_urb_finished = 0; 425 spin_unlock_irqrestore(&dev->buflock, flags); 426 427 usb_fill_int_urb(dev->interrupt_in_urb, dev->udev, 428 usb_rcvintpipe(dev->udev, 429 dev->interrupt_in_endpoint->bEndpointAddress), 430 dev->interrupt_in_buffer, 431 usb_endpoint_maxp(dev->interrupt_in_endpoint), 432 adu_interrupt_in_callback, 433 dev, 434 dev->interrupt_in_endpoint->bInterval); 435 retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); 436 if (retval) { 437 dev->read_urb_finished = 1; 438 if (retval == -ENOMEM) { 439 retval = bytes_read ? bytes_read : -ENOMEM; 440 } 441 dev_dbg(&dev->udev->dev, 442 "%s : submit failed\n", 443 __func__); 444 goto exit; 445 } 446 } 447 448 /* we wait for I/O to complete */ 449 set_current_state(TASK_INTERRUPTIBLE); 450 add_wait_queue(&dev->read_wait, &wait); 451 spin_lock_irqsave(&dev->buflock, flags); 452 if (!dev->read_urb_finished) { 453 spin_unlock_irqrestore(&dev->buflock, flags); 454 timeout = schedule_timeout(COMMAND_TIMEOUT); 455 } else { 456 spin_unlock_irqrestore(&dev->buflock, flags); 457 set_current_state(TASK_RUNNING); 458 } 459 remove_wait_queue(&dev->read_wait, &wait); 460 461 if (timeout <= 0) { 462 dev_dbg(&dev->udev->dev, 463 "%s : timeout\n", __func__); 464 retval = bytes_read ? bytes_read : -ETIMEDOUT; 465 goto exit; 466 } 467 468 if (signal_pending(current)) { 469 dev_dbg(&dev->udev->dev, 470 "%s : signal pending\n", 471 __func__); 472 retval = bytes_read ? bytes_read : -EINTR; 473 goto exit; 474 } 475 } 476 } 477 } 478 479 retval = bytes_read; 480 /* if the primary buffer is empty then use it */ 481 spin_lock_irqsave(&dev->buflock, flags); 482 if (should_submit && dev->read_urb_finished) { 483 dev->read_urb_finished = 0; 484 spin_unlock_irqrestore(&dev->buflock, flags); 485 usb_fill_int_urb(dev->interrupt_in_urb, dev->udev, 486 usb_rcvintpipe(dev->udev, 487 dev->interrupt_in_endpoint->bEndpointAddress), 488 dev->interrupt_in_buffer, 489 usb_endpoint_maxp(dev->interrupt_in_endpoint), 490 adu_interrupt_in_callback, 491 dev, 492 dev->interrupt_in_endpoint->bInterval); 493 if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL) != 0) 494 dev->read_urb_finished = 1; 495 /* we ignore failure */ 496 } else { 497 spin_unlock_irqrestore(&dev->buflock, flags); 498 } 499 500 exit: 501 /* unlock the device */ 502 mutex_unlock(&dev->mtx); 503 504 return retval; 505 } 506 507 static ssize_t adu_write(struct file *file, const __user char *buffer, 508 size_t count, loff_t *ppos) 509 { 510 DECLARE_WAITQUEUE(waita, current); 511 struct adu_device *dev; 512 size_t bytes_written = 0; 513 size_t bytes_to_write; 514 size_t buffer_size; 515 unsigned long flags; 516 int retval; 517 518 dev = file->private_data; 519 520 retval = mutex_lock_interruptible(&dev->mtx); 521 if (retval) 522 goto exit_nolock; 523 524 /* verify that the device wasn't unplugged */ 525 if (dev->udev == NULL) { 526 retval = -ENODEV; 527 pr_err("No device or device unplugged %d\n", retval); 528 goto exit; 529 } 530 531 /* verify that we actually have some data to write */ 532 if (count == 0) { 533 dev_dbg(&dev->udev->dev, "%s : write request of 0 bytes\n", 534 __func__); 535 goto exit; 536 } 537 538 while (count > 0) { 539 add_wait_queue(&dev->write_wait, &waita); 540 set_current_state(TASK_INTERRUPTIBLE); 541 spin_lock_irqsave(&dev->buflock, flags); 542 if (!dev->out_urb_finished) { 543 spin_unlock_irqrestore(&dev->buflock, flags); 544 545 mutex_unlock(&dev->mtx); 546 if (signal_pending(current)) { 547 dev_dbg(&dev->udev->dev, "%s : interrupted\n", 548 __func__); 549 set_current_state(TASK_RUNNING); 550 retval = -EINTR; 551 goto exit_onqueue; 552 } 553 if (schedule_timeout(COMMAND_TIMEOUT) == 0) { 554 dev_dbg(&dev->udev->dev, 555 "%s - command timed out.\n", __func__); 556 retval = -ETIMEDOUT; 557 goto exit_onqueue; 558 } 559 remove_wait_queue(&dev->write_wait, &waita); 560 retval = mutex_lock_interruptible(&dev->mtx); 561 if (retval) { 562 retval = bytes_written ? bytes_written : retval; 563 goto exit_nolock; 564 } 565 566 dev_dbg(&dev->udev->dev, 567 "%s : in progress, count = %zd\n", 568 __func__, count); 569 } else { 570 spin_unlock_irqrestore(&dev->buflock, flags); 571 set_current_state(TASK_RUNNING); 572 remove_wait_queue(&dev->write_wait, &waita); 573 dev_dbg(&dev->udev->dev, "%s : sending, count = %zd\n", 574 __func__, count); 575 576 /* write the data into interrupt_out_buffer from userspace */ 577 buffer_size = usb_endpoint_maxp(dev->interrupt_out_endpoint); 578 bytes_to_write = count > buffer_size ? buffer_size : count; 579 dev_dbg(&dev->udev->dev, 580 "%s : buffer_size = %zd, count = %zd, bytes_to_write = %zd\n", 581 __func__, buffer_size, count, bytes_to_write); 582 583 if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write) != 0) { 584 retval = -EFAULT; 585 goto exit; 586 } 587 588 /* send off the urb */ 589 usb_fill_int_urb( 590 dev->interrupt_out_urb, 591 dev->udev, 592 usb_sndintpipe(dev->udev, dev->interrupt_out_endpoint->bEndpointAddress), 593 dev->interrupt_out_buffer, 594 bytes_to_write, 595 adu_interrupt_out_callback, 596 dev, 597 dev->interrupt_out_endpoint->bInterval); 598 dev->interrupt_out_urb->actual_length = bytes_to_write; 599 dev->out_urb_finished = 0; 600 retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL); 601 if (retval < 0) { 602 dev->out_urb_finished = 1; 603 dev_err(&dev->udev->dev, "Couldn't submit " 604 "interrupt_out_urb %d\n", retval); 605 goto exit; 606 } 607 608 buffer += bytes_to_write; 609 count -= bytes_to_write; 610 611 bytes_written += bytes_to_write; 612 } 613 } 614 mutex_unlock(&dev->mtx); 615 return bytes_written; 616 617 exit: 618 mutex_unlock(&dev->mtx); 619 exit_nolock: 620 return retval; 621 622 exit_onqueue: 623 remove_wait_queue(&dev->write_wait, &waita); 624 return retval; 625 } 626 627 /* file operations needed when we register this driver */ 628 static const struct file_operations adu_fops = { 629 .owner = THIS_MODULE, 630 .read = adu_read, 631 .write = adu_write, 632 .open = adu_open, 633 .release = adu_release, 634 .llseek = noop_llseek, 635 }; 636 637 /* 638 * usb class driver info in order to get a minor number from the usb core, 639 * and to have the device registered with devfs and the driver core 640 */ 641 static struct usb_class_driver adu_class = { 642 .name = "usb/adutux%d", 643 .fops = &adu_fops, 644 .minor_base = ADU_MINOR_BASE, 645 }; 646 647 /** 648 * adu_probe 649 * 650 * Called by the usb core when a new device is connected that it thinks 651 * this driver might be interested in. 652 */ 653 static int adu_probe(struct usb_interface *interface, 654 const struct usb_device_id *id) 655 { 656 struct usb_device *udev = interface_to_usbdev(interface); 657 struct adu_device *dev = NULL; 658 struct usb_host_interface *iface_desc; 659 struct usb_endpoint_descriptor *endpoint; 660 int retval = -ENODEV; 661 int in_end_size; 662 int out_end_size; 663 int i; 664 665 if (udev == NULL) { 666 dev_err(&interface->dev, "udev is NULL.\n"); 667 goto exit; 668 } 669 670 /* allocate memory for our device state and initialize it */ 671 dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL); 672 if (!dev) { 673 retval = -ENOMEM; 674 goto exit; 675 } 676 677 mutex_init(&dev->mtx); 678 spin_lock_init(&dev->buflock); 679 dev->udev = udev; 680 init_waitqueue_head(&dev->read_wait); 681 init_waitqueue_head(&dev->write_wait); 682 683 iface_desc = &interface->altsetting[0]; 684 685 /* set up the endpoint information */ 686 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { 687 endpoint = &iface_desc->endpoint[i].desc; 688 689 if (usb_endpoint_is_int_in(endpoint)) 690 dev->interrupt_in_endpoint = endpoint; 691 692 if (usb_endpoint_is_int_out(endpoint)) 693 dev->interrupt_out_endpoint = endpoint; 694 } 695 if (dev->interrupt_in_endpoint == NULL) { 696 dev_err(&interface->dev, "interrupt in endpoint not found\n"); 697 goto error; 698 } 699 if (dev->interrupt_out_endpoint == NULL) { 700 dev_err(&interface->dev, "interrupt out endpoint not found\n"); 701 goto error; 702 } 703 704 in_end_size = usb_endpoint_maxp(dev->interrupt_in_endpoint); 705 out_end_size = usb_endpoint_maxp(dev->interrupt_out_endpoint); 706 707 dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL); 708 if (!dev->read_buffer_primary) { 709 retval = -ENOMEM; 710 goto error; 711 } 712 713 /* debug code prime the buffer */ 714 memset(dev->read_buffer_primary, 'a', in_end_size); 715 memset(dev->read_buffer_primary + in_end_size, 'b', in_end_size); 716 memset(dev->read_buffer_primary + (2 * in_end_size), 'c', in_end_size); 717 memset(dev->read_buffer_primary + (3 * in_end_size), 'd', in_end_size); 718 719 dev->read_buffer_secondary = kmalloc((4 * in_end_size), GFP_KERNEL); 720 if (!dev->read_buffer_secondary) { 721 retval = -ENOMEM; 722 goto error; 723 } 724 725 /* debug code prime the buffer */ 726 memset(dev->read_buffer_secondary, 'e', in_end_size); 727 memset(dev->read_buffer_secondary + in_end_size, 'f', in_end_size); 728 memset(dev->read_buffer_secondary + (2 * in_end_size), 'g', in_end_size); 729 memset(dev->read_buffer_secondary + (3 * in_end_size), 'h', in_end_size); 730 731 dev->interrupt_in_buffer = kmalloc(in_end_size, GFP_KERNEL); 732 if (!dev->interrupt_in_buffer) 733 goto error; 734 735 /* debug code prime the buffer */ 736 memset(dev->interrupt_in_buffer, 'i', in_end_size); 737 738 dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); 739 if (!dev->interrupt_in_urb) 740 goto error; 741 dev->interrupt_out_buffer = kmalloc(out_end_size, GFP_KERNEL); 742 if (!dev->interrupt_out_buffer) 743 goto error; 744 dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); 745 if (!dev->interrupt_out_urb) 746 goto error; 747 748 if (!usb_string(udev, udev->descriptor.iSerialNumber, dev->serial_number, 749 sizeof(dev->serial_number))) { 750 dev_err(&interface->dev, "Could not retrieve serial number\n"); 751 goto error; 752 } 753 dev_dbg(&interface->dev,"serial_number=%s", dev->serial_number); 754 755 /* we can register the device now, as it is ready */ 756 usb_set_intfdata(interface, dev); 757 758 retval = usb_register_dev(interface, &adu_class); 759 760 if (retval) { 761 /* something prevented us from registering this driver */ 762 dev_err(&interface->dev, "Not able to get a minor for this device.\n"); 763 usb_set_intfdata(interface, NULL); 764 goto error; 765 } 766 767 dev->minor = interface->minor; 768 769 /* let the user know what node this device is now attached to */ 770 dev_info(&interface->dev, "ADU%d %s now attached to /dev/usb/adutux%d\n", 771 le16_to_cpu(udev->descriptor.idProduct), dev->serial_number, 772 (dev->minor - ADU_MINOR_BASE)); 773 exit: 774 return retval; 775 776 error: 777 adu_delete(dev); 778 return retval; 779 } 780 781 /** 782 * adu_disconnect 783 * 784 * Called by the usb core when the device is removed from the system. 785 */ 786 static void adu_disconnect(struct usb_interface *interface) 787 { 788 struct adu_device *dev; 789 int minor; 790 791 dev = usb_get_intfdata(interface); 792 793 mutex_lock(&dev->mtx); /* not interruptible */ 794 dev->udev = NULL; /* poison */ 795 minor = dev->minor; 796 usb_deregister_dev(interface, &adu_class); 797 mutex_unlock(&dev->mtx); 798 799 mutex_lock(&adutux_mutex); 800 usb_set_intfdata(interface, NULL); 801 802 /* if the device is not opened, then we clean up right now */ 803 if (!dev->open_count) 804 adu_delete(dev); 805 806 mutex_unlock(&adutux_mutex); 807 } 808 809 /* usb specific object needed to register this driver with the usb subsystem */ 810 static struct usb_driver adu_driver = { 811 .name = "adutux", 812 .probe = adu_probe, 813 .disconnect = adu_disconnect, 814 .id_table = device_table, 815 }; 816 817 module_usb_driver(adu_driver); 818 819 MODULE_AUTHOR(DRIVER_AUTHOR); 820 MODULE_DESCRIPTION(DRIVER_DESC); 821 MODULE_LICENSE("GPL"); 822