1# 2# USB Miscellaneous driver configuration 3# 4comment "USB Miscellaneous drivers" 5 6config USB_EMI62 7 tristate "EMI 6|2m USB Audio interface support" 8 ---help--- 9 This driver loads firmware to Emagic EMI 6|2m low latency USB 10 Audio and Midi interface. 11 12 After firmware load the device is handled with standard linux 13 USB Audio driver. 14 15 This code is also available as a module ( = code which can be 16 inserted in and removed from the running kernel whenever you want). 17 The module will be called audio. If you want to compile it as a 18 module, say M here and read <file:Documentation/kbuild/modules.txt>. 19 20config USB_EMI26 21 tristate "EMI 2|6 USB Audio interface support" 22 ---help--- 23 This driver loads firmware to Emagic EMI 2|6 low latency USB 24 Audio interface. 25 26 After firmware load the device is handled with standard linux 27 USB Audio driver. 28 29 To compile this driver as a module, choose M here: the 30 module will be called emi26. 31 32config USB_ADUTUX 33 tristate "ADU devices from Ontrak Control Systems" 34 help 35 Say Y if you want to use an ADU device from Ontrak Control 36 Systems. 37 38 To compile this driver as a module, choose M here. The module 39 will be called adutux. 40 41config USB_SEVSEG 42 tristate "USB 7-Segment LED Display" 43 help 44 Say Y here if you have a USB 7-Segment Display by Delcom 45 46 To compile this driver as a module, choose M here: the 47 module will be called usbsevseg. 48 49config USB_RIO500 50 tristate "USB Diamond Rio500 support" 51 help 52 Say Y here if you want to connect a USB Rio500 mp3 player to your 53 computer's USB port. Please read <file:Documentation/usb/rio.txt> 54 for more information. 55 56 To compile this driver as a module, choose M here: the 57 module will be called rio500. 58 59config USB_LEGOTOWER 60 tristate "USB Lego Infrared Tower support" 61 help 62 Say Y here if you want to connect a USB Lego Infrared Tower to your 63 computer's USB port. 64 65 This code is also available as a module ( = code which can be 66 inserted in and removed from the running kernel whenever you want). 67 The module will be called legousbtower. If you want to compile it as 68 a module, say M here and read 69 <file:Documentation/kbuild/modules.txt>. 70 71config USB_LCD 72 tristate "USB LCD driver support" 73 help 74 Say Y here if you want to connect an USBLCD to your computer's 75 USB port. The USBLCD is a small USB interface board for 76 alphanumeric LCD modules. See <http://www.usblcd.de/> for more 77 information. 78 79 To compile this driver as a module, choose M here: the 80 module will be called usblcd. 81 82config USB_LED 83 tristate "USB LED driver support" 84 help 85 Say Y here if you want to connect an USBLED device to your 86 computer's USB port. 87 88 To compile this driver as a module, choose M here: the 89 module will be called usbled. 90 91config USB_CYPRESS_CY7C63 92 tristate "Cypress CY7C63xxx USB driver support" 93 help 94 Say Y here if you want to connect a Cypress CY7C63xxx 95 micro controller to your computer's USB port. Currently this 96 driver supports the pre-programmed devices (incl. firmware) 97 by AK Modul-Bus Computer GmbH. 98 99 Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html 100 101 To compile this driver as a module, choose M here: the 102 module will be called cypress_cy7c63. 103 104config USB_CYTHERM 105 tristate "Cypress USB thermometer driver support" 106 help 107 Say Y here if you want to connect a Cypress USB thermometer 108 device to your computer's USB port. This device is also known 109 as the Cypress USB Starter kit or demo board. The Elektor 110 magazine published a modified version of this device in issue 111 #291. 112 113 To compile this driver as a module, choose M here: the 114 module will be called cytherm. 115 116config USB_IDMOUSE 117 tristate "Siemens ID USB Mouse Fingerprint sensor support" 118 help 119 Say Y here if you want to use the fingerprint sensor on 120 the Siemens ID Mouse. There is also a Siemens ID Mouse 121 _Professional_, which has not been tested with this driver, 122 but uses the same sensor and may therefore work. 123 124 This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX", 125 which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm". 126 127 See also <http://www.fs.tum.de/~echtler/idmouse/>. 128 129config USB_FTDI_ELAN 130 tristate "Elan PCMCIA CardBus Adapter USB Client" 131 help 132 ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. 133 Currently only the U132 adapter is available. 134 135 The U132 is specifically designed for CardBus PC cards that contain 136 an OHCI host controller. Typical PC cards are the Orange Mobile 3G 137 Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work 138 with PC cards that do not contain an OHCI controller. To use a U132 139 adapter you will need this "ftdi-elan" module as well as the "u132-hcd" 140 module which is a USB host controller driver that talks to the OHCI 141 controller within CardBus card that are inserted in the U132 adapter. 142 143 This driver has been tested with a CardBus OHCI USB adapter, and 144 worked with a USB PEN Drive inserted into the first USB port of 145 the PCCARD. A rather pointless thing to do, but useful for testing. 146 147 See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller" 148 149 It is safe to say M here. 150 151config USB_APPLEDISPLAY 152 tristate "Apple Cinema Display support" 153 select BACKLIGHT_LCD_SUPPORT 154 select BACKLIGHT_CLASS_DEVICE 155 help 156 Say Y here if you want to control the backlight of Apple Cinema 157 Displays over USB. This driver provides a sysfs interface. 158 159source "drivers/usb/misc/sisusbvga/Kconfig" 160 161config USB_LD 162 tristate "USB LD driver" 163 help 164 This driver is for generic USB devices that use interrupt transfers, 165 like LD Didactic's USB devices. 166 167 To compile this driver as a module, choose M here: the 168 module will be called ldusb. 169 170config USB_TRANCEVIBRATOR 171 tristate "PlayStation 2 Trance Vibrator driver support" 172 help 173 Say Y here if you want to connect a PlayStation 2 Trance Vibrator 174 device to your computer's USB port. 175 176 To compile this driver as a module, choose M here: the 177 module will be called trancevibrator. 178 179config USB_IOWARRIOR 180 tristate "IO Warrior driver support" 181 help 182 Say Y here if you want to support the IO Warrior devices from Code 183 Mercenaries. This includes support for the following devices: 184 IO Warrior 40 185 IO Warrior 24 186 IO Warrior 56 187 IO Warrior 24 Power Vampire 188 189 To compile this driver as a module, choose M here: the 190 module will be called iowarrior. 191 192config USB_TEST 193 tristate "USB testing driver" 194 help 195 This driver is for testing host controller software. It is used 196 with specialized device firmware for regression and stress testing, 197 to help prevent problems from cropping up with "real" drivers. 198 199 See <http://www.linux-usb.org/usbtest/> for more information, 200 including sample test device firmware and "how to use it". 201 202config USB_EHSET_TEST_FIXTURE 203 tristate "USB EHSET Test Fixture driver" 204 help 205 Say Y here if you want to support the special test fixture device 206 used for the USB-IF Embedded Host High-Speed Electrical Test procedure. 207 208 When the test fixture is connected, it can enumerate as one of several 209 VID/PID pairs. This driver then initiates a corresponding test mode on 210 the downstream port to which the test fixture is attached. 211 212 See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more 213 information. 214 215config USB_ISIGHTFW 216 tristate "iSight firmware loading support" 217 select FW_LOADER 218 help 219 This driver loads firmware for USB Apple iSight cameras, allowing 220 them to be driven by the USB video class driver available at 221 http://linux-uvc.berlios.de 222 223 The firmware for this driver must be extracted from the MacOS 224 driver beforehand. Tools for doing so are available at 225 http://bersace03.free.fr 226 227config USB_YUREX 228 tristate "USB YUREX driver support" 229 help 230 Say Y here if you want to connect a YUREX to your computer's 231 USB port. The YUREX is a leg-shakes sensor. See 232 <http://bbu.kayac.com/en/> for further information. 233 This driver supports read/write of leg-shakes counter and 234 fasync for the counter update via a device file /dev/yurex*. 235 236 To compile this driver as a module, choose M here: the 237 module will be called yurex. 238 239config USB_EZUSB_FX2 240 tristate "Functions for loading firmware on EZUSB chips" 241 help 242 Say Y here if you need EZUSB device support. 243 (Cypress FX/FX2/FX2LP microcontrollers) 244 245config USB_HSIC_USB3503 246 tristate "USB3503 HSIC to USB20 Driver" 247 depends on I2C 248 select REGMAP_I2C 249 help 250 This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. 251