1# 2# USB Miscellaneous driver configuration 3# 4comment "USB Miscellaneous drivers" 5 6config USB_EMI62 7 tristate "EMI 6|2m USB Audio interface support" 8 ---help--- 9 This driver loads firmware to Emagic EMI 6|2m low latency USB 10 Audio and Midi interface. 11 12 After firmware load the device is handled with standard linux 13 USB Audio driver. 14 15 This code is also available as a module ( = code which can be 16 inserted in and removed from the running kernel whenever you want). 17 The module will be called audio. If you want to compile it as a 18 module, say M here and read <file:Documentation/kbuild/modules.txt>. 19 20config USB_EMI26 21 tristate "EMI 2|6 USB Audio interface support" 22 ---help--- 23 This driver loads firmware to Emagic EMI 2|6 low latency USB 24 Audio interface. 25 26 After firmware load the device is handled with standard linux 27 USB Audio driver. 28 29 To compile this driver as a module, choose M here: the 30 module will be called emi26. 31 32config USB_ADUTUX 33 tristate "ADU devices from Ontrak Control Systems" 34 help 35 Say Y if you want to use an ADU device from Ontrak Control 36 Systems. 37 38 To compile this driver as a module, choose M here. The module 39 will be called adutux. 40 41config USB_SEVSEG 42 tristate "USB 7-Segment LED Display" 43 help 44 Say Y here if you have a USB 7-Segment Display by Delcom 45 46 To compile this driver as a module, choose M here: the 47 module will be called usbsevseg. 48 49config USB_RIO500 50 tristate "USB Diamond Rio500 support" 51 help 52 Say Y here if you want to connect a USB Rio500 mp3 player to your 53 computer's USB port. Please read <file:Documentation/usb/rio.txt> 54 for more information. 55 56 To compile this driver as a module, choose M here: the 57 module will be called rio500. 58 59config USB_LEGOTOWER 60 tristate "USB Lego Infrared Tower support" 61 help 62 Say Y here if you want to connect a USB Lego Infrared Tower to your 63 computer's USB port. 64 65 This code is also available as a module ( = code which can be 66 inserted in and removed from the running kernel whenever you want). 67 The module will be called legousbtower. If you want to compile it as 68 a module, say M here and read 69 <file:Documentation/kbuild/modules.txt>. 70 71config USB_LCD 72 tristate "USB LCD driver support" 73 help 74 Say Y here if you want to connect an USBLCD to your computer's 75 USB port. The USBLCD is a small USB interface board for 76 alphanumeric LCD modules. See <http://www.usblcd.de/> for more 77 information. 78 79 To compile this driver as a module, choose M here: the 80 module will be called usblcd. 81 82config USB_LED 83 tristate "USB LED driver support" 84 help 85 Say Y here if you want to connect an USBLED device to your 86 computer's USB port. 87 88 To compile this driver as a module, choose M here: the 89 module will be called usbled. 90 91config USB_CYPRESS_CY7C63 92 tristate "Cypress CY7C63xxx USB driver support" 93 help 94 Say Y here if you want to connect a Cypress CY7C63xxx 95 micro controller to your computer's USB port. Currently this 96 driver supports the pre-programmed devices (incl. firmware) 97 by AK Modul-Bus Computer GmbH. 98 99 Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html 100 101 To compile this driver as a module, choose M here: the 102 module will be called cypress_cy7c63. 103 104config USB_CYTHERM 105 tristate "Cypress USB thermometer driver support" 106 help 107 Say Y here if you want to connect a Cypress USB thermometer 108 device to your computer's USB port. This device is also known 109 as the Cypress USB Starter kit or demo board. The Elektor 110 magazine published a modified version of this device in issue 111 #291. 112 113 To compile this driver as a module, choose M here: the 114 module will be called cytherm. 115 116config USB_IDMOUSE 117 tristate "Siemens ID USB Mouse Fingerprint sensor support" 118 help 119 Say Y here if you want to use the fingerprint sensor on 120 the Siemens ID Mouse. There is also a Siemens ID Mouse 121 _Professional_, which has not been tested with this driver, 122 but uses the same sensor and may therefore work. 123 124 This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX", 125 which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm". 126 127 See also <http://www.fs.tum.de/~echtler/idmouse/>. 128 129config USB_FTDI_ELAN 130 tristate "Elan PCMCIA CardBus Adapter USB Client" 131 default M 132 help 133 ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. 134 Currently only the U132 adapter is available. 135 136 The U132 is specifically designed for CardBus PC cards that contain 137 an OHCI host controller. Typical PC cards are the Orange Mobile 3G 138 Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work 139 with PC cards that do not contain an OHCI controller. To use a U132 140 adapter you will need this "ftdi-elan" module as well as the "u132-hcd" 141 module which is a USB host controller driver that talks to the OHCI 142 controller within CardBus card that are inserted in the U132 adapter. 143 144 This driver has been tested with a CardBus OHCI USB adapter, and 145 worked with a USB PEN Drive inserted into the first USB port of 146 the PCCARD. A rather pointless thing to do, but useful for testing. 147 148 See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller" 149 150 It is safe to say M here. 151 152config USB_APPLEDISPLAY 153 tristate "Apple Cinema Display support" 154 select BACKLIGHT_LCD_SUPPORT 155 select BACKLIGHT_CLASS_DEVICE 156 help 157 Say Y here if you want to control the backlight of Apple Cinema 158 Displays over USB. This driver provides a sysfs interface. 159 160source "drivers/usb/misc/sisusbvga/Kconfig" 161 162config USB_LD 163 tristate "USB LD driver" 164 help 165 This driver is for generic USB devices that use interrupt transfers, 166 like LD Didactic's USB devices. 167 168 To compile this driver as a module, choose M here: the 169 module will be called ldusb. 170 171config USB_TRANCEVIBRATOR 172 tristate "PlayStation 2 Trance Vibrator driver support" 173 help 174 Say Y here if you want to connect a PlayStation 2 Trance Vibrator 175 device to your computer's USB port. 176 177 To compile this driver as a module, choose M here: the 178 module will be called trancevibrator. 179 180config USB_IOWARRIOR 181 tristate "IO Warrior driver support" 182 help 183 Say Y here if you want to support the IO Warrior devices from Code 184 Mercenaries. This includes support for the following devices: 185 IO Warrior 40 186 IO Warrior 24 187 IO Warrior 56 188 IO Warrior 24 Power Vampire 189 190 To compile this driver as a module, choose M here: the 191 module will be called iowarrior. 192 193config USB_TEST 194 tristate "USB testing driver" 195 help 196 This driver is for testing host controller software. It is used 197 with specialized device firmware for regression and stress testing, 198 to help prevent problems from cropping up with "real" drivers. 199 200 See <http://www.linux-usb.org/usbtest/> for more information, 201 including sample test device firmware and "how to use it". 202 203config USB_EHSET_TEST_FIXTURE 204 tristate "USB EHSET Test Fixture driver" 205 help 206 Say Y here if you want to support the special test fixture device 207 used for the USB-IF Embedded Host High-Speed Electrical Test procedure. 208 209 When the test fixture is connected, it can enumerate as one of several 210 VID/PID pairs. This driver then initiates a corresponding test mode on 211 the downstream port to which the test fixture is attached. 212 213 See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more 214 information. 215 216config USB_ISIGHTFW 217 tristate "iSight firmware loading support" 218 select FW_LOADER 219 help 220 This driver loads firmware for USB Apple iSight cameras, allowing 221 them to be driven by the USB video class driver available at 222 http://linux-uvc.berlios.de 223 224 The firmware for this driver must be extracted from the MacOS 225 driver beforehand. Tools for doing so are available at 226 http://bersace03.free.fr 227 228config USB_YUREX 229 tristate "USB YUREX driver support" 230 help 231 Say Y here if you want to connect a YUREX to your computer's 232 USB port. The YUREX is a leg-shakes sensor. See 233 <http://bbu.kayac.com/en/> for further information. 234 This driver supports read/write of leg-shakes counter and 235 fasync for the counter update via a device file /dev/yurex*. 236 237 To compile this driver as a module, choose M here: the 238 module will be called yurex. 239 240config USB_EZUSB_FX2 241 tristate "Functions for loading firmware on EZUSB chips" 242 help 243 Say Y here if you need EZUSB device support. 244 (Cypress FX/FX2/FX2LP microcontrollers) 245 246config USB_HSIC_USB3503 247 tristate "USB3503 HSIC to USB20 Driver" 248 depends on I2C 249 select REGMAP_I2C 250 help 251 This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. 252