1# SPDX-License-Identifier: GPL-2.0 2# 3# USB Miscellaneous driver configuration 4# 5comment "USB Miscellaneous drivers" 6 7config USB_EMI62 8 tristate "EMI 6|2m USB Audio interface support" 9 help 10 This driver loads firmware to Emagic EMI 6|2m low latency USB 11 Audio and Midi interface. 12 13 After firmware load the device is handled with standard linux 14 USB Audio driver. 15 16 This code is also available as a module ( = code which can be 17 inserted in and removed from the running kernel whenever you want). 18 The module will be called audio. If you want to compile it as a 19 module, say M here and read <file:Documentation/kbuild/modules.rst>. 20 21config USB_EMI26 22 tristate "EMI 2|6 USB Audio interface support" 23 help 24 This driver loads firmware to Emagic EMI 2|6 low latency USB 25 Audio interface. 26 27 After firmware load the device is handled with standard linux 28 USB Audio driver. 29 30 To compile this driver as a module, choose M here: the 31 module will be called emi26. 32 33config USB_ADUTUX 34 tristate "ADU devices from Ontrak Control Systems" 35 help 36 Say Y if you want to use an ADU device from Ontrak Control 37 Systems. 38 39 To compile this driver as a module, choose M here. The module 40 will be called adutux. 41 42config USB_SEVSEG 43 tristate "USB 7-Segment LED Display" 44 help 45 Say Y here if you have a USB 7-Segment Display by Delcom 46 47 To compile this driver as a module, choose M here: the 48 module will be called usbsevseg. 49 50config USB_LEGOTOWER 51 tristate "USB Lego Infrared Tower support" 52 help 53 Say Y here if you want to connect a USB Lego Infrared Tower to your 54 computer's USB port. 55 56 This code is also available as a module ( = code which can be 57 inserted in and removed from the running kernel whenever you want). 58 The module will be called legousbtower. If you want to compile it as 59 a module, say M here and read 60 <file:Documentation/kbuild/modules.rst>. 61 62config USB_LCD 63 tristate "USB LCD driver support" 64 help 65 Say Y here if you want to connect an USBLCD to your computer's 66 USB port. The USBLCD is a small USB interface board for 67 alphanumeric LCD modules. See <http://www.usblcd.de/> for more 68 information. 69 70 To compile this driver as a module, choose M here: the 71 module will be called usblcd. 72 73config USB_CYPRESS_CY7C63 74 tristate "Cypress CY7C63xxx USB driver support" 75 help 76 Say Y here if you want to connect a Cypress CY7C63xxx 77 micro controller to your computer's USB port. Currently this 78 driver supports the pre-programmed devices (incl. firmware) 79 by AK Modul-Bus Computer GmbH. 80 81 Please see: https://www.ak-modul-bus.de/stat/mikrocontroller.html 82 83 To compile this driver as a module, choose M here: the 84 module will be called cypress_cy7c63. 85 86config USB_CYTHERM 87 tristate "Cypress USB thermometer driver support" 88 help 89 Say Y here if you want to connect a Cypress USB thermometer 90 device to your computer's USB port. This device is also known 91 as the Cypress USB Starter kit or demo board. The Elektor 92 magazine published a modified version of this device in issue 93 #291. 94 95 To compile this driver as a module, choose M here: the 96 module will be called cytherm. 97 98config USB_IDMOUSE 99 tristate "Siemens ID USB Mouse Fingerprint sensor support" 100 help 101 Say Y here if you want to use the fingerprint sensor on 102 the Siemens ID Mouse. There is also a Siemens ID Mouse 103 _Professional_, which has not been tested with this driver, 104 but uses the same sensor and may therefore work. 105 106 This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX", 107 which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm". 108 109 See also <https://www.fs.tum.de/~echtler/idmouse/>. 110 111config USB_FTDI_ELAN 112 tristate "Elan PCMCIA CardBus Adapter USB Client" 113 help 114 ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. 115 Currently only the U132 adapter is available. 116 117 The U132 is specifically designed for CardBus PC cards that contain 118 an OHCI host controller. Typical PC cards are the Orange Mobile 3G 119 Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work 120 with PC cards that do not contain an OHCI controller. To use a U132 121 adapter you will need this "ftdi-elan" module as well as the "u132-hcd" 122 module which is a USB host controller driver that talks to the OHCI 123 controller within CardBus card that are inserted in the U132 adapter. 124 125 This driver has been tested with a CardBus OHCI USB adapter, and 126 worked with a USB PEN Drive inserted into the first USB port of 127 the PCCARD. A rather pointless thing to do, but useful for testing. 128 129 See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller" 130 131 It is safe to say M here. 132 133config USB_APPLEDISPLAY 134 tristate "Apple Cinema Display support" 135 select BACKLIGHT_CLASS_DEVICE 136 help 137 Say Y here if you want to control the backlight of Apple Cinema 138 Displays over USB. This driver provides a sysfs interface. 139 140config USB_QCOM_EUD 141 tristate "QCOM Embedded USB Debugger(EUD) Driver" 142 depends on ARCH_QCOM || COMPILE_TEST 143 select USB_ROLE_SWITCH 144 help 145 This module enables support for Qualcomm Technologies, Inc. 146 Embedded USB Debugger (EUD). The EUD is a control peripheral 147 which reports VBUS attach/detach events and has USB-based 148 debug and trace capabilities. On selecting m, the module name 149 that is built is qcom_eud.ko 150 151config APPLE_MFI_FASTCHARGE 152 tristate "Fast charge control for iOS devices" 153 select POWER_SUPPLY 154 help 155 Say Y here if you want to control whether iOS devices will 156 fast charge from the USB interface, as implemented in "MFi" 157 chargers. 158 159 It is safe to say M here. 160 161source "drivers/usb/misc/sisusbvga/Kconfig" 162 163config USB_LD 164 tristate "USB LD driver" 165 help 166 This driver is for generic USB devices that use interrupt transfers, 167 like LD Didactic's USB devices. 168 169 To compile this driver as a module, choose M here: the 170 module will be called ldusb. 171 172config USB_TRANCEVIBRATOR 173 tristate "PlayStation 2 Trance Vibrator driver support" 174 help 175 Say Y here if you want to connect a PlayStation 2 Trance Vibrator 176 device to your computer's USB port. 177 178 To compile this driver as a module, choose M here: the 179 module will be called trancevibrator. 180 181config USB_IOWARRIOR 182 tristate "IO Warrior driver support" 183 help 184 Say Y here if you want to support the IO Warrior devices from Code 185 Mercenaries. This includes support for the following devices: 186 IO Warrior 40 187 IO Warrior 24 188 IO Warrior 56 189 IO Warrior 24 Power Vampire 190 191 To compile this driver as a module, choose M here: the 192 module will be called iowarrior. 193 194config USB_TEST 195 tristate "USB testing driver" 196 help 197 This driver is for testing host controller software. It is used 198 with specialized device firmware for regression and stress testing, 199 to help prevent problems from cropping up with "real" drivers. 200 201 See <http://www.linux-usb.org/usbtest/> for more information, 202 including sample test device firmware and "how to use it". 203 204config USB_EHSET_TEST_FIXTURE 205 tristate "USB EHSET Test Fixture driver" 206 help 207 Say Y here if you want to support the special test fixture device 208 used for the USB-IF Embedded Host High-Speed Electrical Test procedure. 209 210 When the test fixture is connected, it can enumerate as one of several 211 VID/PID pairs. This driver then initiates a corresponding test mode on 212 the downstream port to which the test fixture is attached. 213 214 See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more 215 information. 216 217config USB_ISIGHTFW 218 tristate "iSight firmware loading support" 219 select FW_LOADER 220 help 221 This driver loads firmware for USB Apple iSight cameras, allowing 222 them to be driven by the USB video class driver available at 223 http://linux-uvc.berlios.de 224 225 The firmware for this driver must be extracted from the MacOS 226 driver beforehand. Tools for doing so are available at 227 http://bersace03.free.fr 228 229config USB_YUREX 230 tristate "USB YUREX driver support" 231 help 232 Say Y here if you want to connect a YUREX to your computer's 233 USB port. The YUREX is a leg-shakes sensor. See 234 <http://bbu.kayac.com/en/> for further information. 235 This driver supports read/write of leg-shakes counter and 236 fasync for the counter update via a device file /dev/yurex*. 237 238 To compile this driver as a module, choose M here: the 239 module will be called yurex. 240 241config USB_EZUSB_FX2 242 tristate "Functions for loading firmware on EZUSB chips" 243 help 244 Say Y here if you need EZUSB device support. 245 (Cypress FX/FX2/FX2LP microcontrollers) 246 247config USB_HUB_USB251XB 248 tristate "USB251XB Hub Controller Configuration Driver" 249 depends on I2C 250 help 251 This option enables support for configuration via SMBus of the 252 Microchip USB251x/xBi USB 2.0 Hub Controller series. Configuration 253 parameters may be set in devicetree or platform data. 254 Say Y or M here if you need to configure such a device via SMBus. 255 256config USB_HSIC_USB3503 257 tristate "USB3503 HSIC to USB20 Driver" 258 depends on I2C 259 select REGMAP_I2C 260 help 261 This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. 262 263config USB_HSIC_USB4604 264 tristate "USB4604 HSIC to USB20 Driver" 265 depends on I2C 266 help 267 This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver. 268 269config USB_LINK_LAYER_TEST 270 tristate "USB Link Layer Test driver" 271 help 272 This driver is for generating specific traffic for Super Speed Link 273 Layer Test Device. Say Y only when you want to conduct USB Super Speed 274 Link Layer Test for host controllers. 275 276config USB_CHAOSKEY 277 tristate "ChaosKey random number generator driver support" 278 depends on HW_RANDOM 279 help 280 Say Y here if you want to connect an AltusMetrum ChaosKey or 281 Araneus Alea I to your computer's USB port. These devices 282 are hardware random number generators which hook into the 283 kernel entropy pool to ensure a large supply of entropy for 284 /dev/random and /dev/urandom and also provides direct access 285 via /dev/chaoskeyX 286 287 To compile this driver as a module, choose M here: the 288 module will be called chaoskey. 289 290config BRCM_USB_PINMAP 291 tristate "Broadcom pinmap driver support" 292 depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST 293 default ARCH_BRCMSTB && PHY_BRCM_USB 294 help 295 This option enables support for remapping some USB external 296 signals, which are typically on dedicated pins on the chip, 297 to any gpio. 298 299config USB_ONBOARD_HUB 300 tristate "Onboard USB hub support" 301 depends on OF 302 help 303 Say Y here if you want to support discrete onboard USB hubs that 304 don't require an additional control bus for initialization, but 305 need some non-trivial form of initialization, such as enabling a 306 power regulator. An example for such a hub is the Realtek 307 RTS5411. 308 309 This driver can be used as a module but its state (module vs 310 builtin) must match the state of the USB subsystem. Enabling 311 this config will enable the driver and it will automatically 312 match the state of the USB subsystem. If this driver is a 313 module it will be called onboard_usb_hub. 314