1 // SPDX-License-Identifier: GPL-2.0 2 /* Driver for Microtek Scanmaker X6 USB scanner, and possibly others. 3 * 4 * (C) Copyright 2000 John Fremlin <vii@penguinpowered.com> 5 * (C) Copyright 2000 Oliver Neukum <Oliver.Neukum@lrz.uni-muenchen.de> 6 * 7 * Parts shamelessly stolen from usb-storage and copyright by their 8 * authors. Thanks to Matt Dharm for giving us permission! 9 * 10 * This driver implements a SCSI host controller driver and a USB 11 * device driver. To avoid confusion, all the USB related stuff is 12 * prefixed by mts_usb_ and all the SCSI stuff by mts_scsi_. 13 * 14 * Microtek (www.microtek.com) did not release the specifications for 15 * their USB protocol to us, so we had to reverse engineer them. We 16 * don't know for which models they are valid. 17 * 18 * The X6 USB has three bulk endpoints, one output (0x1) down which 19 * commands and outgoing data are sent, and two input: 0x82 from which 20 * normal data is read from the scanner (in packets of maximum 32 21 * bytes) and from which the status byte is read, and 0x83 from which 22 * the results of a scan (or preview) are read in up to 64 * 1024 byte 23 * chunks by the Windows driver. We don't know how much it is possible 24 * to read at a time from 0x83. 25 * 26 * It seems possible to read (with URB transfers) everything from 0x82 27 * in one go, without bothering to read in 32 byte chunks. 28 * 29 * There seems to be an optimisation of a further READ implicit if 30 * you simply read from 0x83. 31 * 32 * Guessed protocol: 33 * 34 * Send raw SCSI command to EP 0x1 35 * 36 * If there is data to receive: 37 * If the command was READ datatype=image: 38 * Read a lot of data from EP 0x83 39 * Else: 40 * Read data from EP 0x82 41 * Else: 42 * If there is data to transmit: 43 * Write it to EP 0x1 44 * 45 * Read status byte from EP 0x82 46 * 47 * References: 48 * 49 * The SCSI command set for the scanner is available from 50 * ftp://ftp.microtek.com/microtek/devpack/ 51 * 52 * Microtek NV sent us a more up to date version of the document. If 53 * you want it, just send mail. 54 * 55 * Status: 56 * 57 * Untested with multiple scanners. 58 * Untested on SMP. 59 * Untested on a bigendian machine. 60 * 61 * History: 62 * 63 * 20000417 starting history 64 * 20000417 fixed load oops 65 * 20000417 fixed unload oops 66 * 20000419 fixed READ IMAGE detection 67 * 20000424 started conversion to use URBs 68 * 20000502 handled short transfers as errors 69 * 20000513 rename and organisation of functions (john) 70 * 20000513 added IDs for all products supported by Windows driver (john) 71 * 20000514 Rewrote mts_scsi_queuecommand to use URBs (john) 72 * 20000514 Version 0.0.8j 73 * 20000514 Fix reporting of non-existent devices to SCSI layer (john) 74 * 20000514 Added MTS_DEBUG_INT (john) 75 * 20000514 Changed "usb-microtek" to "microtek" for consistency (john) 76 * 20000514 Stupid bug fixes (john) 77 * 20000514 Version 0.0.9j 78 * 20000515 Put transfer context and URB in mts_desc (john) 79 * 20000515 Added prelim turn off debugging support (john) 80 * 20000515 Version 0.0.10j 81 * 20000515 Fixed up URB allocation (clear URB on alloc) (john) 82 * 20000515 Version 0.0.11j 83 * 20000516 Removed unnecessary spinlock in mts_transfer_context (john) 84 * 20000516 Removed unnecessary up on instance lock in mts_remove_nolock (john) 85 * 20000516 Implemented (badly) scsi_abort (john) 86 * 20000516 Version 0.0.12j 87 * 20000517 Hopefully removed mts_remove_nolock quasideadlock (john) 88 * 20000517 Added mts_debug_dump to print ll USB info (john) 89 * 20000518 Tweaks and documentation updates (john) 90 * 20000518 Version 0.0.13j 91 * 20000518 Cleaned up abort handling (john) 92 * 20000523 Removed scsi_command and various scsi_..._resets (john) 93 * 20000523 Added unlink URB on scsi_abort, now OHCI supports it (john) 94 * 20000523 Fixed last tiresome compile warning (john) 95 * 20000523 Version 0.0.14j (though version 0.1 has come out?) 96 * 20000602 Added primitive reset 97 * 20000602 Version 0.2.0 98 * 20000603 various cosmetic changes 99 * 20000603 Version 0.2.1 100 * 20000620 minor cosmetic changes 101 * 20000620 Version 0.2.2 102 * 20000822 Hopefully fixed deadlock in mts_remove_nolock() 103 * 20000822 Fixed minor race in mts_transfer_cleanup() 104 * 20000822 Fixed deadlock on submission error in queuecommand 105 * 20000822 Version 0.2.3 106 * 20000913 Reduced module size if debugging is off 107 * 20000913 Version 0.2.4 108 * 20010210 New abort logic 109 * 20010210 Version 0.3.0 110 * 20010217 Merged scatter/gather 111 * 20010218 Version 0.4.0 112 * 20010218 Cosmetic fixes 113 * 20010218 Version 0.4.1 114 * 20010306 Abort while using scatter/gather 115 * 20010306 Version 0.4.2 116 * 20010311 Remove all timeouts and tidy up generally (john) 117 * 20010320 check return value of scsi_register() 118 * 20010320 Version 0.4.3 119 * 20010408 Identify version on module load. 120 * 20011003 Fix multiple requests 121 */ 122 123 #include <linux/module.h> 124 #include <linux/kernel.h> 125 #include <linux/signal.h> 126 #include <linux/errno.h> 127 #include <linux/random.h> 128 #include <linux/poll.h> 129 #include <linux/slab.h> 130 #include <linux/spinlock.h> 131 #include <linux/usb.h> 132 #include <linux/proc_fs.h> 133 134 #include <linux/atomic.h> 135 #include <linux/blkdev.h> 136 #include "../../scsi/scsi.h" 137 #include <scsi/scsi_host.h> 138 139 #include "microtek.h" 140 141 #define DRIVER_AUTHOR "John Fremlin <vii@penguinpowered.com>, Oliver Neukum <Oliver.Neukum@lrz.uni-muenchen.de>" 142 #define DRIVER_DESC "Microtek Scanmaker X6 USB scanner driver" 143 144 /* Should we do debugging? */ 145 146 //#define MTS_DO_DEBUG 147 148 /* USB layer driver interface */ 149 150 static int mts_usb_probe(struct usb_interface *intf, 151 const struct usb_device_id *id); 152 static void mts_usb_disconnect(struct usb_interface *intf); 153 154 static const struct usb_device_id mts_usb_ids[]; 155 156 static struct usb_driver mts_usb_driver = { 157 .name = "microtekX6", 158 .probe = mts_usb_probe, 159 .disconnect = mts_usb_disconnect, 160 .id_table = mts_usb_ids, 161 }; 162 163 164 /* Internal driver stuff */ 165 166 #define MTS_VERSION "0.4.3" 167 #define MTS_NAME "microtek usb (rev " MTS_VERSION "): " 168 169 #define MTS_WARNING(x...) \ 170 printk( KERN_WARNING MTS_NAME x ) 171 #define MTS_ERROR(x...) \ 172 printk( KERN_ERR MTS_NAME x ) 173 #define MTS_INT_ERROR(x...) \ 174 MTS_ERROR(x) 175 #define MTS_MESSAGE(x...) \ 176 printk( KERN_INFO MTS_NAME x ) 177 178 #if defined MTS_DO_DEBUG 179 180 #define MTS_DEBUG(x...) \ 181 printk( KERN_DEBUG MTS_NAME x ) 182 183 #define MTS_DEBUG_GOT_HERE() \ 184 MTS_DEBUG("got to %s:%d (%s)\n", __FILE__, (int)__LINE__, __func__ ) 185 #define MTS_DEBUG_INT() \ 186 do { MTS_DEBUG_GOT_HERE(); \ 187 MTS_DEBUG("transfer = 0x%x context = 0x%x\n",(int)transfer,(int)context ); \ 188 MTS_DEBUG("status = 0x%x data-length = 0x%x sent = 0x%x\n",transfer->status,(int)context->data_length, (int)transfer->actual_length ); \ 189 mts_debug_dump(context->instance);\ 190 } while(0) 191 #else 192 193 #define MTS_NUL_STATEMENT do { } while(0) 194 195 #define MTS_DEBUG(x...) MTS_NUL_STATEMENT 196 #define MTS_DEBUG_GOT_HERE() MTS_NUL_STATEMENT 197 #define MTS_DEBUG_INT() MTS_NUL_STATEMENT 198 199 #endif 200 201 202 203 #define MTS_INT_INIT()\ 204 struct mts_transfer_context* context = (struct mts_transfer_context*)transfer->context; \ 205 MTS_DEBUG_INT();\ 206 207 #ifdef MTS_DO_DEBUG 208 209 static inline void mts_debug_dump(struct mts_desc* desc) { 210 MTS_DEBUG("desc at 0x%x: toggle = %02x%02x\n", 211 (int)desc, 212 (int)desc->usb_dev->toggle[1],(int)desc->usb_dev->toggle[0] 213 ); 214 MTS_DEBUG("ep_out=%x ep_response=%x ep_image=%x\n", 215 usb_sndbulkpipe(desc->usb_dev,desc->ep_out), 216 usb_rcvbulkpipe(desc->usb_dev,desc->ep_response), 217 usb_rcvbulkpipe(desc->usb_dev,desc->ep_image) 218 ); 219 } 220 221 222 static inline void mts_show_command(struct scsi_cmnd *srb) 223 { 224 char *what = NULL; 225 226 switch (srb->cmnd[0]) { 227 case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break; 228 case REZERO_UNIT: what = "REZERO_UNIT"; break; 229 case REQUEST_SENSE: what = "REQUEST_SENSE"; break; 230 case FORMAT_UNIT: what = "FORMAT_UNIT"; break; 231 case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break; 232 case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break; 233 case READ_6: what = "READ_6"; break; 234 case WRITE_6: what = "WRITE_6"; break; 235 case SEEK_6: what = "SEEK_6"; break; 236 case READ_REVERSE: what = "READ_REVERSE"; break; 237 case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break; 238 case SPACE: what = "SPACE"; break; 239 case INQUIRY: what = "INQUIRY"; break; 240 case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break; 241 case MODE_SELECT: what = "MODE_SELECT"; break; 242 case RESERVE: what = "RESERVE"; break; 243 case RELEASE: what = "RELEASE"; break; 244 case COPY: what = "COPY"; break; 245 case ERASE: what = "ERASE"; break; 246 case MODE_SENSE: what = "MODE_SENSE"; break; 247 case START_STOP: what = "START_STOP"; break; 248 case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break; 249 case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break; 250 case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break; 251 case SET_WINDOW: what = "SET_WINDOW"; break; 252 case READ_CAPACITY: what = "READ_CAPACITY"; break; 253 case READ_10: what = "READ_10"; break; 254 case WRITE_10: what = "WRITE_10"; break; 255 case SEEK_10: what = "SEEK_10"; break; 256 case WRITE_VERIFY: what = "WRITE_VERIFY"; break; 257 case VERIFY: what = "VERIFY"; break; 258 case SEARCH_HIGH: what = "SEARCH_HIGH"; break; 259 case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break; 260 case SEARCH_LOW: what = "SEARCH_LOW"; break; 261 case SET_LIMITS: what = "SET_LIMITS"; break; 262 case READ_POSITION: what = "READ_POSITION"; break; 263 case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break; 264 case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break; 265 case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break; 266 case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break; 267 case COMPARE: what = "COMPARE"; break; 268 case COPY_VERIFY: what = "COPY_VERIFY"; break; 269 case WRITE_BUFFER: what = "WRITE_BUFFER"; break; 270 case READ_BUFFER: what = "READ_BUFFER"; break; 271 case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break; 272 case READ_LONG: what = "READ_LONG"; break; 273 case WRITE_LONG: what = "WRITE_LONG"; break; 274 case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break; 275 case WRITE_SAME: what = "WRITE_SAME"; break; 276 case READ_TOC: what = "READ_TOC"; break; 277 case LOG_SELECT: what = "LOG_SELECT"; break; 278 case LOG_SENSE: what = "LOG_SENSE"; break; 279 case MODE_SELECT_10: what = "MODE_SELECT_10"; break; 280 case MODE_SENSE_10: what = "MODE_SENSE_10"; break; 281 case MOVE_MEDIUM: what = "MOVE_MEDIUM"; break; 282 case READ_12: what = "READ_12"; break; 283 case WRITE_12: what = "WRITE_12"; break; 284 case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break; 285 case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break; 286 case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break; 287 case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break; 288 case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break; 289 case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break; 290 case WRITE_LONG_2: what = "WRITE_LONG_2"; break; 291 default: 292 MTS_DEBUG("can't decode command\n"); 293 goto out; 294 break; 295 } 296 MTS_DEBUG( "Command %s (%d bytes)\n", what, srb->cmd_len); 297 298 out: 299 MTS_DEBUG( " %10ph\n", srb->cmnd); 300 } 301 302 #else 303 304 static inline void mts_show_command(struct scsi_cmnd * dummy) 305 { 306 } 307 308 static inline void mts_debug_dump(struct mts_desc* dummy) 309 { 310 } 311 312 #endif 313 314 static inline void mts_urb_abort(struct mts_desc* desc) { 315 MTS_DEBUG_GOT_HERE(); 316 mts_debug_dump(desc); 317 318 usb_kill_urb( desc->urb ); 319 } 320 321 static int mts_slave_alloc (struct scsi_device *s) 322 { 323 s->inquiry_len = 0x24; 324 return 0; 325 } 326 327 static int mts_slave_configure (struct scsi_device *s) 328 { 329 blk_queue_dma_alignment(s->request_queue, (512 - 1)); 330 return 0; 331 } 332 333 static int mts_scsi_abort(struct scsi_cmnd *srb) 334 { 335 struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]); 336 337 MTS_DEBUG_GOT_HERE(); 338 339 mts_urb_abort(desc); 340 341 return FAILED; 342 } 343 344 static int mts_scsi_host_reset(struct scsi_cmnd *srb) 345 { 346 struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]); 347 int result; 348 349 MTS_DEBUG_GOT_HERE(); 350 mts_debug_dump(desc); 351 352 result = usb_lock_device_for_reset(desc->usb_dev, desc->usb_intf); 353 if (result == 0) { 354 result = usb_reset_device(desc->usb_dev); 355 usb_unlock_device(desc->usb_dev); 356 } 357 return result ? FAILED : SUCCESS; 358 } 359 360 static int 361 mts_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *srb); 362 363 static void mts_transfer_cleanup( struct urb *transfer ); 364 static void mts_do_sg(struct urb * transfer); 365 366 static inline 367 void mts_int_submit_urb (struct urb* transfer, 368 int pipe, 369 void* data, 370 unsigned length, 371 usb_complete_t callback ) 372 /* Interrupt context! */ 373 374 /* Holding transfer->context->lock! */ 375 { 376 int res; 377 378 MTS_INT_INIT(); 379 380 usb_fill_bulk_urb(transfer, 381 context->instance->usb_dev, 382 pipe, 383 data, 384 length, 385 callback, 386 context 387 ); 388 389 res = usb_submit_urb( transfer, GFP_ATOMIC ); 390 if ( unlikely(res) ) { 391 MTS_INT_ERROR( "could not submit URB! Error was %d\n",(int)res ); 392 context->srb->result = DID_ERROR << 16; 393 mts_transfer_cleanup(transfer); 394 } 395 } 396 397 398 static void mts_transfer_cleanup( struct urb *transfer ) 399 /* Interrupt context! */ 400 { 401 MTS_INT_INIT(); 402 403 if ( likely(context->final_callback != NULL) ) 404 context->final_callback(context->srb); 405 } 406 407 static void mts_transfer_done( struct urb *transfer ) 408 { 409 MTS_INT_INIT(); 410 411 context->srb->result &= MTS_SCSI_ERR_MASK; 412 context->srb->result |= (unsigned)(*context->scsi_status)<<1; 413 414 mts_transfer_cleanup(transfer); 415 } 416 417 418 static void mts_get_status( struct urb *transfer ) 419 /* Interrupt context! */ 420 { 421 MTS_INT_INIT(); 422 423 mts_int_submit_urb(transfer, 424 usb_rcvbulkpipe(context->instance->usb_dev, 425 context->instance->ep_response), 426 context->scsi_status, 427 1, 428 mts_transfer_done ); 429 } 430 431 static void mts_data_done( struct urb* transfer ) 432 /* Interrupt context! */ 433 { 434 int status = transfer->status; 435 MTS_INT_INIT(); 436 437 if ( context->data_length != transfer->actual_length ) { 438 scsi_set_resid(context->srb, context->data_length - 439 transfer->actual_length); 440 } else if ( unlikely(status) ) { 441 context->srb->result = (status == -ENOENT ? DID_ABORT : DID_ERROR)<<16; 442 } 443 444 mts_get_status(transfer); 445 } 446 447 448 static void mts_command_done( struct urb *transfer ) 449 /* Interrupt context! */ 450 { 451 int status = transfer->status; 452 MTS_INT_INIT(); 453 454 if ( unlikely(status) ) { 455 if (status == -ENOENT) { 456 /* We are being killed */ 457 MTS_DEBUG_GOT_HERE(); 458 context->srb->result = DID_ABORT<<16; 459 } else { 460 /* A genuine error has occurred */ 461 MTS_DEBUG_GOT_HERE(); 462 463 context->srb->result = DID_ERROR<<16; 464 } 465 mts_transfer_cleanup(transfer); 466 467 return; 468 } 469 470 if (context->srb->cmnd[0] == REQUEST_SENSE) { 471 mts_int_submit_urb(transfer, 472 context->data_pipe, 473 context->srb->sense_buffer, 474 context->data_length, 475 mts_data_done); 476 } else { if ( context->data ) { 477 mts_int_submit_urb(transfer, 478 context->data_pipe, 479 context->data, 480 context->data_length, 481 scsi_sg_count(context->srb) > 1 ? 482 mts_do_sg : mts_data_done); 483 } else { 484 mts_get_status(transfer); 485 } 486 } 487 } 488 489 static void mts_do_sg (struct urb* transfer) 490 { 491 int status = transfer->status; 492 MTS_INT_INIT(); 493 494 MTS_DEBUG("Processing fragment %d of %d\n", context->fragment, 495 scsi_sg_count(context->srb)); 496 497 if (unlikely(status)) { 498 context->srb->result = (status == -ENOENT ? DID_ABORT : DID_ERROR)<<16; 499 mts_transfer_cleanup(transfer); 500 } 501 502 context->curr_sg = sg_next(context->curr_sg); 503 mts_int_submit_urb(transfer, 504 context->data_pipe, 505 sg_virt(context->curr_sg), 506 context->curr_sg->length, 507 sg_is_last(context->curr_sg) ? 508 mts_data_done : mts_do_sg); 509 } 510 511 static const u8 mts_read_image_sig[] = { 0x28, 00, 00, 00 }; 512 static const u8 mts_read_image_sig_len = 4; 513 static const unsigned char mts_direction[256/8] = { 514 0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77, 515 0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 516 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 517 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 518 }; 519 520 521 #define MTS_DIRECTION_IS_IN(x) ((mts_direction[x>>3] >> (x & 7)) & 1) 522 523 static void 524 mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc) 525 { 526 int pipe; 527 528 MTS_DEBUG_GOT_HERE(); 529 530 desc->context.instance = desc; 531 desc->context.srb = srb; 532 533 if (!scsi_bufflen(srb)) { 534 desc->context.data = NULL; 535 desc->context.data_length = 0; 536 return; 537 } else { 538 desc->context.curr_sg = scsi_sglist(srb); 539 desc->context.data = sg_virt(desc->context.curr_sg); 540 desc->context.data_length = desc->context.curr_sg->length; 541 } 542 543 544 /* can't rely on srb->sc_data_direction */ 545 546 /* Brutally ripped from usb-storage */ 547 548 if ( !memcmp( srb->cmnd, mts_read_image_sig, mts_read_image_sig_len ) 549 ) { pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image); 550 MTS_DEBUG( "transferring from desc->ep_image == %d\n", 551 (int)desc->ep_image ); 552 } else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) { 553 pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response); 554 MTS_DEBUG( "transferring from desc->ep_response == %d\n", 555 (int)desc->ep_response); 556 } else { 557 MTS_DEBUG("transferring to desc->ep_out == %d\n", 558 (int)desc->ep_out); 559 pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out); 560 } 561 desc->context.data_pipe = pipe; 562 } 563 564 565 static int 566 mts_scsi_queuecommand_lck(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback) 567 { 568 struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]); 569 int err = 0; 570 int res; 571 572 MTS_DEBUG_GOT_HERE(); 573 mts_show_command(srb); 574 mts_debug_dump(desc); 575 576 if ( srb->device->lun || srb->device->id || srb->device->channel ) { 577 578 MTS_DEBUG("Command to LUN=%d ID=%d CHANNEL=%d from SCSI layer\n",(int)srb->device->lun,(int)srb->device->id, (int)srb->device->channel ); 579 580 MTS_DEBUG("this device doesn't exist\n"); 581 582 srb->result = DID_BAD_TARGET << 16; 583 584 if(likely(callback != NULL)) 585 callback(srb); 586 587 goto out; 588 } 589 590 591 usb_fill_bulk_urb(desc->urb, 592 desc->usb_dev, 593 usb_sndbulkpipe(desc->usb_dev,desc->ep_out), 594 srb->cmnd, 595 srb->cmd_len, 596 mts_command_done, 597 &desc->context 598 ); 599 600 601 mts_build_transfer_context( srb, desc ); 602 desc->context.final_callback = callback; 603 604 /* here we need ATOMIC as we are called with the iolock */ 605 res=usb_submit_urb(desc->urb, GFP_ATOMIC); 606 607 if(unlikely(res)){ 608 MTS_ERROR("error %d submitting URB\n",(int)res); 609 srb->result = DID_ERROR << 16; 610 611 if(likely(callback != NULL)) 612 callback(srb); 613 614 } 615 out: 616 return err; 617 } 618 619 static DEF_SCSI_QCMD(mts_scsi_queuecommand) 620 621 static struct scsi_host_template mts_scsi_host_template = { 622 .module = THIS_MODULE, 623 .name = "microtekX6", 624 .proc_name = "microtekX6", 625 .queuecommand = mts_scsi_queuecommand, 626 .eh_abort_handler = mts_scsi_abort, 627 .eh_host_reset_handler = mts_scsi_host_reset, 628 .sg_tablesize = SG_ALL, 629 .can_queue = 1, 630 .this_id = -1, 631 .emulated = 1, 632 .slave_alloc = mts_slave_alloc, 633 .slave_configure = mts_slave_configure, 634 .max_sectors= 256, /* 128 K */ 635 }; 636 637 /* The entries of microtek_table must correspond, line-by-line to 638 the entries of mts_supported_products[]. */ 639 640 static const struct usb_device_id mts_usb_ids[] = 641 { 642 { USB_DEVICE(0x4ce, 0x0300) }, 643 { USB_DEVICE(0x5da, 0x0094) }, 644 { USB_DEVICE(0x5da, 0x0099) }, 645 { USB_DEVICE(0x5da, 0x009a) }, 646 { USB_DEVICE(0x5da, 0x00a0) }, 647 { USB_DEVICE(0x5da, 0x00a3) }, 648 { USB_DEVICE(0x5da, 0x80a3) }, 649 { USB_DEVICE(0x5da, 0x80ac) }, 650 { USB_DEVICE(0x5da, 0x00b6) }, 651 { } /* Terminating entry */ 652 }; 653 654 MODULE_DEVICE_TABLE (usb, mts_usb_ids); 655 656 657 static int mts_usb_probe(struct usb_interface *intf, 658 const struct usb_device_id *id) 659 { 660 int i; 661 int ep_out = -1; 662 int ep_in_set[3]; /* this will break if we have more than three endpoints 663 which is why we check */ 664 int *ep_in_current = ep_in_set; 665 int err_retval = -ENOMEM; 666 667 struct mts_desc * new_desc; 668 struct usb_device *dev = interface_to_usbdev (intf); 669 670 /* the current altsetting on the interface we're probing */ 671 struct usb_host_interface *altsetting; 672 673 MTS_DEBUG_GOT_HERE(); 674 MTS_DEBUG( "usb-device descriptor at %x\n", (int)dev ); 675 676 MTS_DEBUG( "product id = 0x%x, vendor id = 0x%x\n", 677 le16_to_cpu(dev->descriptor.idProduct), 678 le16_to_cpu(dev->descriptor.idVendor) ); 679 680 MTS_DEBUG_GOT_HERE(); 681 682 /* the current altsetting on the interface we're probing */ 683 altsetting = intf->cur_altsetting; 684 685 686 /* Check if the config is sane */ 687 688 if ( altsetting->desc.bNumEndpoints != MTS_EP_TOTAL ) { 689 MTS_WARNING( "expecting %d got %d endpoints! Bailing out.\n", 690 (int)MTS_EP_TOTAL, (int)altsetting->desc.bNumEndpoints ); 691 return -ENODEV; 692 } 693 694 for( i = 0; i < altsetting->desc.bNumEndpoints; i++ ) { 695 if ((altsetting->endpoint[i].desc.bmAttributes & 696 USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) { 697 698 MTS_WARNING( "can only deal with bulk endpoints; endpoint %d is not bulk.\n", 699 (int)altsetting->endpoint[i].desc.bEndpointAddress ); 700 } else { 701 if (altsetting->endpoint[i].desc.bEndpointAddress & 702 USB_DIR_IN) 703 *ep_in_current++ 704 = altsetting->endpoint[i].desc.bEndpointAddress & 705 USB_ENDPOINT_NUMBER_MASK; 706 else { 707 if ( ep_out != -1 ) { 708 MTS_WARNING( "can only deal with one output endpoints. Bailing out." ); 709 return -ENODEV; 710 } 711 712 ep_out = altsetting->endpoint[i].desc.bEndpointAddress & 713 USB_ENDPOINT_NUMBER_MASK; 714 } 715 } 716 717 } 718 719 720 if ( ep_out == -1 ) { 721 MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" ); 722 return -ENODEV; 723 } 724 725 726 new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL); 727 if (!new_desc) 728 goto out; 729 730 new_desc->urb = usb_alloc_urb(0, GFP_KERNEL); 731 if (!new_desc->urb) 732 goto out_kfree; 733 734 new_desc->context.scsi_status = kmalloc(1, GFP_KERNEL); 735 if (!new_desc->context.scsi_status) 736 goto out_free_urb; 737 738 new_desc->usb_dev = dev; 739 new_desc->usb_intf = intf; 740 741 /* endpoints */ 742 new_desc->ep_out = ep_out; 743 new_desc->ep_response = ep_in_set[0]; 744 new_desc->ep_image = ep_in_set[1]; 745 746 if ( new_desc->ep_out != MTS_EP_OUT ) 747 MTS_WARNING( "will this work? Command EP is not usually %d\n", 748 (int)new_desc->ep_out ); 749 750 if ( new_desc->ep_response != MTS_EP_RESPONSE ) 751 MTS_WARNING( "will this work? Response EP is not usually %d\n", 752 (int)new_desc->ep_response ); 753 754 if ( new_desc->ep_image != MTS_EP_IMAGE ) 755 MTS_WARNING( "will this work? Image data EP is not usually %d\n", 756 (int)new_desc->ep_image ); 757 758 new_desc->host = scsi_host_alloc(&mts_scsi_host_template, 759 sizeof(new_desc)); 760 if (!new_desc->host) 761 goto out_kfree2; 762 763 new_desc->host->hostdata[0] = (unsigned long)new_desc; 764 if (scsi_add_host(new_desc->host, &dev->dev)) { 765 err_retval = -EIO; 766 goto out_host_put; 767 } 768 scsi_scan_host(new_desc->host); 769 770 usb_set_intfdata(intf, new_desc); 771 return 0; 772 773 out_host_put: 774 scsi_host_put(new_desc->host); 775 out_kfree2: 776 kfree(new_desc->context.scsi_status); 777 out_free_urb: 778 usb_free_urb(new_desc->urb); 779 out_kfree: 780 kfree(new_desc); 781 out: 782 return err_retval; 783 } 784 785 static void mts_usb_disconnect (struct usb_interface *intf) 786 { 787 struct mts_desc *desc = usb_get_intfdata(intf); 788 789 usb_set_intfdata(intf, NULL); 790 791 usb_kill_urb(desc->urb); 792 scsi_remove_host(desc->host); 793 794 scsi_host_put(desc->host); 795 usb_free_urb(desc->urb); 796 kfree(desc->context.scsi_status); 797 kfree(desc); 798 } 799 800 module_usb_driver(mts_usb_driver); 801 802 MODULE_AUTHOR( DRIVER_AUTHOR ); 803 MODULE_DESCRIPTION( DRIVER_DESC ); 804 MODULE_LICENSE("GPL"); 805