1 /* 2 * xHCI host controller driver 3 * 4 * Copyright (C) 2008 Intel Corp. 5 * 6 * Author: Sarah Sharp 7 * Some code borrowed from the Linux EHCI driver. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 16 * for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software Foundation, 20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 */ 22 23 #ifndef __LINUX_XHCI_HCD_H 24 #define __LINUX_XHCI_HCD_H 25 26 #include <linux/usb.h> 27 #include <linux/timer.h> 28 #include <linux/kernel.h> 29 #include <linux/usb/hcd.h> 30 31 /* Code sharing between pci-quirks and xhci hcd */ 32 #include "xhci-ext-caps.h" 33 #include "pci-quirks.h" 34 35 /* xHCI PCI Configuration Registers */ 36 #define XHCI_SBRN_OFFSET (0x60) 37 38 /* Max number of USB devices for any host controller - limit in section 6.1 */ 39 #define MAX_HC_SLOTS 256 40 /* Section 5.3.3 - MaxPorts */ 41 #define MAX_HC_PORTS 127 42 43 /* 44 * xHCI register interface. 45 * This corresponds to the eXtensible Host Controller Interface (xHCI) 46 * Revision 0.95 specification 47 */ 48 49 /** 50 * struct xhci_cap_regs - xHCI Host Controller Capability Registers. 51 * @hc_capbase: length of the capabilities register and HC version number 52 * @hcs_params1: HCSPARAMS1 - Structural Parameters 1 53 * @hcs_params2: HCSPARAMS2 - Structural Parameters 2 54 * @hcs_params3: HCSPARAMS3 - Structural Parameters 3 55 * @hcc_params: HCCPARAMS - Capability Parameters 56 * @db_off: DBOFF - Doorbell array offset 57 * @run_regs_off: RTSOFF - Runtime register space offset 58 */ 59 struct xhci_cap_regs { 60 __le32 hc_capbase; 61 __le32 hcs_params1; 62 __le32 hcs_params2; 63 __le32 hcs_params3; 64 __le32 hcc_params; 65 __le32 db_off; 66 __le32 run_regs_off; 67 /* Reserved up to (CAPLENGTH - 0x1C) */ 68 }; 69 70 /* hc_capbase bitmasks */ 71 /* bits 7:0 - how long is the Capabilities register */ 72 #define HC_LENGTH(p) XHCI_HC_LENGTH(p) 73 /* bits 31:16 */ 74 #define HC_VERSION(p) (((p) >> 16) & 0xffff) 75 76 /* HCSPARAMS1 - hcs_params1 - bitmasks */ 77 /* bits 0:7, Max Device Slots */ 78 #define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff) 79 #define HCS_SLOTS_MASK 0xff 80 /* bits 8:18, Max Interrupters */ 81 #define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff) 82 /* bits 24:31, Max Ports - max value is 0x7F = 127 ports */ 83 #define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f) 84 85 /* HCSPARAMS2 - hcs_params2 - bitmasks */ 86 /* bits 0:3, frames or uframes that SW needs to queue transactions 87 * ahead of the HW to meet periodic deadlines */ 88 #define HCS_IST(p) (((p) >> 0) & 0xf) 89 /* bits 4:7, max number of Event Ring segments */ 90 #define HCS_ERST_MAX(p) (((p) >> 4) & 0xf) 91 /* bit 26 Scratchpad restore - for save/restore HW state - not used yet */ 92 /* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */ 93 #define HCS_MAX_SCRATCHPAD(p) (((p) >> 27) & 0x1f) 94 95 /* HCSPARAMS3 - hcs_params3 - bitmasks */ 96 /* bits 0:7, Max U1 to U0 latency for the roothub ports */ 97 #define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff) 98 /* bits 16:31, Max U2 to U0 latency for the roothub ports */ 99 #define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff) 100 101 /* HCCPARAMS - hcc_params - bitmasks */ 102 /* true: HC can use 64-bit address pointers */ 103 #define HCC_64BIT_ADDR(p) ((p) & (1 << 0)) 104 /* true: HC can do bandwidth negotiation */ 105 #define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1)) 106 /* true: HC uses 64-byte Device Context structures 107 * FIXME 64-byte context structures aren't supported yet. 108 */ 109 #define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2)) 110 /* true: HC has port power switches */ 111 #define HCC_PPC(p) ((p) & (1 << 3)) 112 /* true: HC has port indicators */ 113 #define HCS_INDICATOR(p) ((p) & (1 << 4)) 114 /* true: HC has Light HC Reset Capability */ 115 #define HCC_LIGHT_RESET(p) ((p) & (1 << 5)) 116 /* true: HC supports latency tolerance messaging */ 117 #define HCC_LTC(p) ((p) & (1 << 6)) 118 /* true: no secondary Stream ID Support */ 119 #define HCC_NSS(p) ((p) & (1 << 7)) 120 /* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */ 121 #define HCC_MAX_PSA(p) (1 << ((((p) >> 12) & 0xf) + 1)) 122 /* Extended Capabilities pointer from PCI base - section 5.3.6 */ 123 #define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p) 124 125 /* db_off bitmask - bits 0:1 reserved */ 126 #define DBOFF_MASK (~0x3) 127 128 /* run_regs_off bitmask - bits 0:4 reserved */ 129 #define RTSOFF_MASK (~0x1f) 130 131 132 /* Number of registers per port */ 133 #define NUM_PORT_REGS 4 134 135 #define PORTSC 0 136 #define PORTPMSC 1 137 #define PORTLI 2 138 #define PORTHLPMC 3 139 140 /** 141 * struct xhci_op_regs - xHCI Host Controller Operational Registers. 142 * @command: USBCMD - xHC command register 143 * @status: USBSTS - xHC status register 144 * @page_size: This indicates the page size that the host controller 145 * supports. If bit n is set, the HC supports a page size 146 * of 2^(n+12), up to a 128MB page size. 147 * 4K is the minimum page size. 148 * @cmd_ring: CRP - 64-bit Command Ring Pointer 149 * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer 150 * @config_reg: CONFIG - Configure Register 151 * @port_status_base: PORTSCn - base address for Port Status and Control 152 * Each port has a Port Status and Control register, 153 * followed by a Port Power Management Status and Control 154 * register, a Port Link Info register, and a reserved 155 * register. 156 * @port_power_base: PORTPMSCn - base address for 157 * Port Power Management Status and Control 158 * @port_link_base: PORTLIn - base address for Port Link Info (current 159 * Link PM state and control) for USB 2.1 and USB 3.0 160 * devices. 161 */ 162 struct xhci_op_regs { 163 __le32 command; 164 __le32 status; 165 __le32 page_size; 166 __le32 reserved1; 167 __le32 reserved2; 168 __le32 dev_notification; 169 __le64 cmd_ring; 170 /* rsvd: offset 0x20-2F */ 171 __le32 reserved3[4]; 172 __le64 dcbaa_ptr; 173 __le32 config_reg; 174 /* rsvd: offset 0x3C-3FF */ 175 __le32 reserved4[241]; 176 /* port 1 registers, which serve as a base address for other ports */ 177 __le32 port_status_base; 178 __le32 port_power_base; 179 __le32 port_link_base; 180 __le32 reserved5; 181 /* registers for ports 2-255 */ 182 __le32 reserved6[NUM_PORT_REGS*254]; 183 }; 184 185 /* USBCMD - USB command - command bitmasks */ 186 /* start/stop HC execution - do not write unless HC is halted*/ 187 #define CMD_RUN XHCI_CMD_RUN 188 /* Reset HC - resets internal HC state machine and all registers (except 189 * PCI config regs). HC does NOT drive a USB reset on the downstream ports. 190 * The xHCI driver must reinitialize the xHC after setting this bit. 191 */ 192 #define CMD_RESET (1 << 1) 193 /* Event Interrupt Enable - a '1' allows interrupts from the host controller */ 194 #define CMD_EIE XHCI_CMD_EIE 195 /* Host System Error Interrupt Enable - get out-of-band signal for HC errors */ 196 #define CMD_HSEIE XHCI_CMD_HSEIE 197 /* bits 4:6 are reserved (and should be preserved on writes). */ 198 /* light reset (port status stays unchanged) - reset completed when this is 0 */ 199 #define CMD_LRESET (1 << 7) 200 /* host controller save/restore state. */ 201 #define CMD_CSS (1 << 8) 202 #define CMD_CRS (1 << 9) 203 /* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */ 204 #define CMD_EWE XHCI_CMD_EWE 205 /* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root 206 * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off. 207 * '0' means the xHC can power it off if all ports are in the disconnect, 208 * disabled, or powered-off state. 209 */ 210 #define CMD_PM_INDEX (1 << 11) 211 /* bits 12:31 are reserved (and should be preserved on writes). */ 212 213 /* IMAN - Interrupt Management Register */ 214 #define IMAN_IE (1 << 1) 215 #define IMAN_IP (1 << 0) 216 217 /* USBSTS - USB status - status bitmasks */ 218 /* HC not running - set to 1 when run/stop bit is cleared. */ 219 #define STS_HALT XHCI_STS_HALT 220 /* serious error, e.g. PCI parity error. The HC will clear the run/stop bit. */ 221 #define STS_FATAL (1 << 2) 222 /* event interrupt - clear this prior to clearing any IP flags in IR set*/ 223 #define STS_EINT (1 << 3) 224 /* port change detect */ 225 #define STS_PORT (1 << 4) 226 /* bits 5:7 reserved and zeroed */ 227 /* save state status - '1' means xHC is saving state */ 228 #define STS_SAVE (1 << 8) 229 /* restore state status - '1' means xHC is restoring state */ 230 #define STS_RESTORE (1 << 9) 231 /* true: save or restore error */ 232 #define STS_SRE (1 << 10) 233 /* true: Controller Not Ready to accept doorbell or op reg writes after reset */ 234 #define STS_CNR XHCI_STS_CNR 235 /* true: internal Host Controller Error - SW needs to reset and reinitialize */ 236 #define STS_HCE (1 << 12) 237 /* bits 13:31 reserved and should be preserved */ 238 239 /* 240 * DNCTRL - Device Notification Control Register - dev_notification bitmasks 241 * Generate a device notification event when the HC sees a transaction with a 242 * notification type that matches a bit set in this bit field. 243 */ 244 #define DEV_NOTE_MASK (0xffff) 245 #define ENABLE_DEV_NOTE(x) (1 << (x)) 246 /* Most of the device notification types should only be used for debug. 247 * SW does need to pay attention to function wake notifications. 248 */ 249 #define DEV_NOTE_FWAKE ENABLE_DEV_NOTE(1) 250 251 /* CRCR - Command Ring Control Register - cmd_ring bitmasks */ 252 /* bit 0 is the command ring cycle state */ 253 /* stop ring operation after completion of the currently executing command */ 254 #define CMD_RING_PAUSE (1 << 1) 255 /* stop ring immediately - abort the currently executing command */ 256 #define CMD_RING_ABORT (1 << 2) 257 /* true: command ring is running */ 258 #define CMD_RING_RUNNING (1 << 3) 259 /* bits 4:5 reserved and should be preserved */ 260 /* Command Ring pointer - bit mask for the lower 32 bits. */ 261 #define CMD_RING_RSVD_BITS (0x3f) 262 263 /* CONFIG - Configure Register - config_reg bitmasks */ 264 /* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */ 265 #define MAX_DEVS(p) ((p) & 0xff) 266 /* bits 8:31 - reserved and should be preserved */ 267 268 /* PORTSC - Port Status and Control Register - port_status_base bitmasks */ 269 /* true: device connected */ 270 #define PORT_CONNECT (1 << 0) 271 /* true: port enabled */ 272 #define PORT_PE (1 << 1) 273 /* bit 2 reserved and zeroed */ 274 /* true: port has an over-current condition */ 275 #define PORT_OC (1 << 3) 276 /* true: port reset signaling asserted */ 277 #define PORT_RESET (1 << 4) 278 /* Port Link State - bits 5:8 279 * A read gives the current link PM state of the port, 280 * a write with Link State Write Strobe set sets the link state. 281 */ 282 #define PORT_PLS_MASK (0xf << 5) 283 #define XDEV_U0 (0x0 << 5) 284 #define XDEV_U2 (0x2 << 5) 285 #define XDEV_U3 (0x3 << 5) 286 #define XDEV_RESUME (0xf << 5) 287 /* true: port has power (see HCC_PPC) */ 288 #define PORT_POWER (1 << 9) 289 /* bits 10:13 indicate device speed: 290 * 0 - undefined speed - port hasn't be initialized by a reset yet 291 * 1 - full speed 292 * 2 - low speed 293 * 3 - high speed 294 * 4 - super speed 295 * 5-15 reserved 296 */ 297 #define DEV_SPEED_MASK (0xf << 10) 298 #define XDEV_FS (0x1 << 10) 299 #define XDEV_LS (0x2 << 10) 300 #define XDEV_HS (0x3 << 10) 301 #define XDEV_SS (0x4 << 10) 302 #define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10)) 303 #define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS) 304 #define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS) 305 #define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS) 306 #define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS) 307 /* Bits 20:23 in the Slot Context are the speed for the device */ 308 #define SLOT_SPEED_FS (XDEV_FS << 10) 309 #define SLOT_SPEED_LS (XDEV_LS << 10) 310 #define SLOT_SPEED_HS (XDEV_HS << 10) 311 #define SLOT_SPEED_SS (XDEV_SS << 10) 312 /* Port Indicator Control */ 313 #define PORT_LED_OFF (0 << 14) 314 #define PORT_LED_AMBER (1 << 14) 315 #define PORT_LED_GREEN (2 << 14) 316 #define PORT_LED_MASK (3 << 14) 317 /* Port Link State Write Strobe - set this when changing link state */ 318 #define PORT_LINK_STROBE (1 << 16) 319 /* true: connect status change */ 320 #define PORT_CSC (1 << 17) 321 /* true: port enable change */ 322 #define PORT_PEC (1 << 18) 323 /* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port 324 * into an enabled state, and the device into the default state. A "warm" reset 325 * also resets the link, forcing the device through the link training sequence. 326 * SW can also look at the Port Reset register to see when warm reset is done. 327 */ 328 #define PORT_WRC (1 << 19) 329 /* true: over-current change */ 330 #define PORT_OCC (1 << 20) 331 /* true: reset change - 1 to 0 transition of PORT_RESET */ 332 #define PORT_RC (1 << 21) 333 /* port link status change - set on some port link state transitions: 334 * Transition Reason 335 * ------------------------------------------------------------------------------ 336 * - U3 to Resume Wakeup signaling from a device 337 * - Resume to Recovery to U0 USB 3.0 device resume 338 * - Resume to U0 USB 2.0 device resume 339 * - U3 to Recovery to U0 Software resume of USB 3.0 device complete 340 * - U3 to U0 Software resume of USB 2.0 device complete 341 * - U2 to U0 L1 resume of USB 2.1 device complete 342 * - U0 to U0 (???) L1 entry rejection by USB 2.1 device 343 * - U0 to disabled L1 entry error with USB 2.1 device 344 * - Any state to inactive Error on USB 3.0 port 345 */ 346 #define PORT_PLC (1 << 22) 347 /* port configure error change - port failed to configure its link partner */ 348 #define PORT_CEC (1 << 23) 349 /* Cold Attach Status - xHC can set this bit to report device attached during 350 * Sx state. Warm port reset should be perfomed to clear this bit and move port 351 * to connected state. 352 */ 353 #define PORT_CAS (1 << 24) 354 /* wake on connect (enable) */ 355 #define PORT_WKCONN_E (1 << 25) 356 /* wake on disconnect (enable) */ 357 #define PORT_WKDISC_E (1 << 26) 358 /* wake on over-current (enable) */ 359 #define PORT_WKOC_E (1 << 27) 360 /* bits 28:29 reserved */ 361 /* true: device is non-removable - for USB 3.0 roothub emulation */ 362 #define PORT_DEV_REMOVE (1 << 30) 363 /* Initiate a warm port reset - complete when PORT_WRC is '1' */ 364 #define PORT_WR (1 << 31) 365 366 /* We mark duplicate entries with -1 */ 367 #define DUPLICATE_ENTRY ((u8)(-1)) 368 369 /* Port Power Management Status and Control - port_power_base bitmasks */ 370 /* Inactivity timer value for transitions into U1, in microseconds. 371 * Timeout can be up to 127us. 0xFF means an infinite timeout. 372 */ 373 #define PORT_U1_TIMEOUT(p) ((p) & 0xff) 374 #define PORT_U1_TIMEOUT_MASK 0xff 375 /* Inactivity timer value for transitions into U2 */ 376 #define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8) 377 #define PORT_U2_TIMEOUT_MASK (0xff << 8) 378 /* Bits 24:31 for port testing */ 379 380 /* USB2 Protocol PORTSPMSC */ 381 #define PORT_L1S_MASK 7 382 #define PORT_L1S_SUCCESS 1 383 #define PORT_RWE (1 << 3) 384 #define PORT_HIRD(p) (((p) & 0xf) << 4) 385 #define PORT_HIRD_MASK (0xf << 4) 386 #define PORT_L1DS_MASK (0xff << 8) 387 #define PORT_L1DS(p) (((p) & 0xff) << 8) 388 #define PORT_HLE (1 << 16) 389 390 391 /* USB2 Protocol PORTHLPMC */ 392 #define PORT_HIRDM(p)((p) & 3) 393 #define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2) 394 #define PORT_BESLD(p)(((p) & 0xf) << 10) 395 396 /* use 512 microseconds as USB2 LPM L1 default timeout. */ 397 #define XHCI_L1_TIMEOUT 512 398 399 /* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency. 400 * Safe to use with mixed HIRD and BESL systems (host and device) and is used 401 * by other operating systems. 402 * 403 * XHCI 1.0 errata 8/14/12 Table 13 notes: 404 * "Software should choose xHC BESL/BESLD field values that do not violate a 405 * device's resume latency requirements, 406 * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached, 407 * or not program values < '4' if BLC = '0' and a BESL device is attached. 408 */ 409 #define XHCI_DEFAULT_BESL 4 410 411 /** 412 * struct xhci_intr_reg - Interrupt Register Set 413 * @irq_pending: IMAN - Interrupt Management Register. Used to enable 414 * interrupts and check for pending interrupts. 415 * @irq_control: IMOD - Interrupt Moderation Register. 416 * Used to throttle interrupts. 417 * @erst_size: Number of segments in the Event Ring Segment Table (ERST). 418 * @erst_base: ERST base address. 419 * @erst_dequeue: Event ring dequeue pointer. 420 * 421 * Each interrupter (defined by a MSI-X vector) has an event ring and an Event 422 * Ring Segment Table (ERST) associated with it. The event ring is comprised of 423 * multiple segments of the same size. The HC places events on the ring and 424 * "updates the Cycle bit in the TRBs to indicate to software the current 425 * position of the Enqueue Pointer." The HCD (Linux) processes those events and 426 * updates the dequeue pointer. 427 */ 428 struct xhci_intr_reg { 429 __le32 irq_pending; 430 __le32 irq_control; 431 __le32 erst_size; 432 __le32 rsvd; 433 __le64 erst_base; 434 __le64 erst_dequeue; 435 }; 436 437 /* irq_pending bitmasks */ 438 #define ER_IRQ_PENDING(p) ((p) & 0x1) 439 /* bits 2:31 need to be preserved */ 440 /* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */ 441 #define ER_IRQ_CLEAR(p) ((p) & 0xfffffffe) 442 #define ER_IRQ_ENABLE(p) ((ER_IRQ_CLEAR(p)) | 0x2) 443 #define ER_IRQ_DISABLE(p) ((ER_IRQ_CLEAR(p)) & ~(0x2)) 444 445 /* irq_control bitmasks */ 446 /* Minimum interval between interrupts (in 250ns intervals). The interval 447 * between interrupts will be longer if there are no events on the event ring. 448 * Default is 4000 (1 ms). 449 */ 450 #define ER_IRQ_INTERVAL_MASK (0xffff) 451 /* Counter used to count down the time to the next interrupt - HW use only */ 452 #define ER_IRQ_COUNTER_MASK (0xffff << 16) 453 454 /* erst_size bitmasks */ 455 /* Preserve bits 16:31 of erst_size */ 456 #define ERST_SIZE_MASK (0xffff << 16) 457 458 /* erst_dequeue bitmasks */ 459 /* Dequeue ERST Segment Index (DESI) - Segment number (or alias) 460 * where the current dequeue pointer lies. This is an optional HW hint. 461 */ 462 #define ERST_DESI_MASK (0x7) 463 /* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by 464 * a work queue (or delayed service routine)? 465 */ 466 #define ERST_EHB (1 << 3) 467 #define ERST_PTR_MASK (0xf) 468 469 /** 470 * struct xhci_run_regs 471 * @microframe_index: 472 * MFINDEX - current microframe number 473 * 474 * Section 5.5 Host Controller Runtime Registers: 475 * "Software should read and write these registers using only Dword (32 bit) 476 * or larger accesses" 477 */ 478 struct xhci_run_regs { 479 __le32 microframe_index; 480 __le32 rsvd[7]; 481 struct xhci_intr_reg ir_set[128]; 482 }; 483 484 /** 485 * struct doorbell_array 486 * 487 * Bits 0 - 7: Endpoint target 488 * Bits 8 - 15: RsvdZ 489 * Bits 16 - 31: Stream ID 490 * 491 * Section 5.6 492 */ 493 struct xhci_doorbell_array { 494 __le32 doorbell[256]; 495 }; 496 497 #define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16)) 498 #define DB_VALUE_HOST 0x00000000 499 500 /** 501 * struct xhci_protocol_caps 502 * @revision: major revision, minor revision, capability ID, 503 * and next capability pointer. 504 * @name_string: Four ASCII characters to say which spec this xHC 505 * follows, typically "USB ". 506 * @port_info: Port offset, count, and protocol-defined information. 507 */ 508 struct xhci_protocol_caps { 509 u32 revision; 510 u32 name_string; 511 u32 port_info; 512 }; 513 514 #define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) 515 #define XHCI_EXT_PORT_OFF(x) ((x) & 0xff) 516 #define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) 517 518 /** 519 * struct xhci_container_ctx 520 * @type: Type of context. Used to calculated offsets to contained contexts. 521 * @size: Size of the context data 522 * @bytes: The raw context data given to HW 523 * @dma: dma address of the bytes 524 * 525 * Represents either a Device or Input context. Holds a pointer to the raw 526 * memory used for the context (bytes) and dma address of it (dma). 527 */ 528 struct xhci_container_ctx { 529 unsigned type; 530 #define XHCI_CTX_TYPE_DEVICE 0x1 531 #define XHCI_CTX_TYPE_INPUT 0x2 532 533 int size; 534 535 u8 *bytes; 536 dma_addr_t dma; 537 }; 538 539 /** 540 * struct xhci_slot_ctx 541 * @dev_info: Route string, device speed, hub info, and last valid endpoint 542 * @dev_info2: Max exit latency for device number, root hub port number 543 * @tt_info: tt_info is used to construct split transaction tokens 544 * @dev_state: slot state and device address 545 * 546 * Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context 547 * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes 548 * reserved at the end of the slot context for HC internal use. 549 */ 550 struct xhci_slot_ctx { 551 __le32 dev_info; 552 __le32 dev_info2; 553 __le32 tt_info; 554 __le32 dev_state; 555 /* offset 0x10 to 0x1f reserved for HC internal use */ 556 __le32 reserved[4]; 557 }; 558 559 /* dev_info bitmasks */ 560 /* Route String - 0:19 */ 561 #define ROUTE_STRING_MASK (0xfffff) 562 /* Device speed - values defined by PORTSC Device Speed field - 20:23 */ 563 #define DEV_SPEED (0xf << 20) 564 /* bit 24 reserved */ 565 /* Is this LS/FS device connected through a HS hub? - bit 25 */ 566 #define DEV_MTT (0x1 << 25) 567 /* Set if the device is a hub - bit 26 */ 568 #define DEV_HUB (0x1 << 26) 569 /* Index of the last valid endpoint context in this device context - 27:31 */ 570 #define LAST_CTX_MASK (0x1f << 27) 571 #define LAST_CTX(p) ((p) << 27) 572 #define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1) 573 #define SLOT_FLAG (1 << 0) 574 #define EP0_FLAG (1 << 1) 575 576 /* dev_info2 bitmasks */ 577 /* Max Exit Latency (ms) - worst case time to wake up all links in dev path */ 578 #define MAX_EXIT (0xffff) 579 /* Root hub port number that is needed to access the USB device */ 580 #define ROOT_HUB_PORT(p) (((p) & 0xff) << 16) 581 #define DEVINFO_TO_ROOT_HUB_PORT(p) (((p) >> 16) & 0xff) 582 /* Maximum number of ports under a hub device */ 583 #define XHCI_MAX_PORTS(p) (((p) & 0xff) << 24) 584 585 /* tt_info bitmasks */ 586 /* 587 * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub 588 * The Slot ID of the hub that isolates the high speed signaling from 589 * this low or full-speed device. '0' if attached to root hub port. 590 */ 591 #define TT_SLOT (0xff) 592 /* 593 * The number of the downstream facing port of the high-speed hub 594 * '0' if the device is not low or full speed. 595 */ 596 #define TT_PORT (0xff << 8) 597 #define TT_THINK_TIME(p) (((p) & 0x3) << 16) 598 599 /* dev_state bitmasks */ 600 /* USB device address - assigned by the HC */ 601 #define DEV_ADDR_MASK (0xff) 602 /* bits 8:26 reserved */ 603 /* Slot state */ 604 #define SLOT_STATE (0x1f << 27) 605 #define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27) 606 607 #define SLOT_STATE_DISABLED 0 608 #define SLOT_STATE_ENABLED SLOT_STATE_DISABLED 609 #define SLOT_STATE_DEFAULT 1 610 #define SLOT_STATE_ADDRESSED 2 611 #define SLOT_STATE_CONFIGURED 3 612 613 /** 614 * struct xhci_ep_ctx 615 * @ep_info: endpoint state, streams, mult, and interval information. 616 * @ep_info2: information on endpoint type, max packet size, max burst size, 617 * error count, and whether the HC will force an event for all 618 * transactions. 619 * @deq: 64-bit ring dequeue pointer address. If the endpoint only 620 * defines one stream, this points to the endpoint transfer ring. 621 * Otherwise, it points to a stream context array, which has a 622 * ring pointer for each flow. 623 * @tx_info: 624 * Average TRB lengths for the endpoint ring and 625 * max payload within an Endpoint Service Interval Time (ESIT). 626 * 627 * Endpoint Context - section 6.2.1.2. This assumes the HC uses 32-byte context 628 * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes 629 * reserved at the end of the endpoint context for HC internal use. 630 */ 631 struct xhci_ep_ctx { 632 __le32 ep_info; 633 __le32 ep_info2; 634 __le64 deq; 635 __le32 tx_info; 636 /* offset 0x14 - 0x1f reserved for HC internal use */ 637 __le32 reserved[3]; 638 }; 639 640 /* ep_info bitmasks */ 641 /* 642 * Endpoint State - bits 0:2 643 * 0 - disabled 644 * 1 - running 645 * 2 - halted due to halt condition - ok to manipulate endpoint ring 646 * 3 - stopped 647 * 4 - TRB error 648 * 5-7 - reserved 649 */ 650 #define EP_STATE_MASK (0xf) 651 #define EP_STATE_DISABLED 0 652 #define EP_STATE_RUNNING 1 653 #define EP_STATE_HALTED 2 654 #define EP_STATE_STOPPED 3 655 #define EP_STATE_ERROR 4 656 /* Mult - Max number of burtst within an interval, in EP companion desc. */ 657 #define EP_MULT(p) (((p) & 0x3) << 8) 658 #define CTX_TO_EP_MULT(p) (((p) >> 8) & 0x3) 659 /* bits 10:14 are Max Primary Streams */ 660 /* bit 15 is Linear Stream Array */ 661 /* Interval - period between requests to an endpoint - 125u increments. */ 662 #define EP_INTERVAL(p) (((p) & 0xff) << 16) 663 #define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff)) 664 #define CTX_TO_EP_INTERVAL(p) (((p) >> 16) & 0xff) 665 #define EP_MAXPSTREAMS_MASK (0x1f << 10) 666 #define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK) 667 /* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */ 668 #define EP_HAS_LSA (1 << 15) 669 670 /* ep_info2 bitmasks */ 671 /* 672 * Force Event - generate transfer events for all TRBs for this endpoint 673 * This will tell the HC to ignore the IOC and ISP flags (for debugging only). 674 */ 675 #define FORCE_EVENT (0x1) 676 #define ERROR_COUNT(p) (((p) & 0x3) << 1) 677 #define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7) 678 #define EP_TYPE(p) ((p) << 3) 679 #define ISOC_OUT_EP 1 680 #define BULK_OUT_EP 2 681 #define INT_OUT_EP 3 682 #define CTRL_EP 4 683 #define ISOC_IN_EP 5 684 #define BULK_IN_EP 6 685 #define INT_IN_EP 7 686 /* bit 6 reserved */ 687 /* bit 7 is Host Initiate Disable - for disabling stream selection */ 688 #define MAX_BURST(p) (((p)&0xff) << 8) 689 #define CTX_TO_MAX_BURST(p) (((p) >> 8) & 0xff) 690 #define MAX_PACKET(p) (((p)&0xffff) << 16) 691 #define MAX_PACKET_MASK (0xffff << 16) 692 #define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff) 693 694 /* Get max packet size from ep desc. Bit 10..0 specify the max packet size. 695 * USB2.0 spec 9.6.6. 696 */ 697 #define GET_MAX_PACKET(p) ((p) & 0x7ff) 698 699 /* tx_info bitmasks */ 700 #define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff) 701 #define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16) 702 #define CTX_TO_MAX_ESIT_PAYLOAD(p) (((p) >> 16) & 0xffff) 703 704 /* deq bitmasks */ 705 #define EP_CTX_CYCLE_MASK (1 << 0) 706 #define SCTX_DEQ_MASK (~0xfL) 707 708 709 /** 710 * struct xhci_input_control_context 711 * Input control context; see section 6.2.5. 712 * 713 * @drop_context: set the bit of the endpoint context you want to disable 714 * @add_context: set the bit of the endpoint context you want to enable 715 */ 716 struct xhci_input_control_ctx { 717 __le32 drop_flags; 718 __le32 add_flags; 719 __le32 rsvd2[6]; 720 }; 721 722 #define EP_IS_ADDED(ctrl_ctx, i) \ 723 (le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1))) 724 #define EP_IS_DROPPED(ctrl_ctx, i) \ 725 (le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) 726 727 /* Represents everything that is needed to issue a command on the command ring. 728 * It's useful to pre-allocate these for commands that cannot fail due to 729 * out-of-memory errors, like freeing streams. 730 */ 731 struct xhci_command { 732 /* Input context for changing device state */ 733 struct xhci_container_ctx *in_ctx; 734 u32 status; 735 /* If completion is null, no one is waiting on this command 736 * and the structure can be freed after the command completes. 737 */ 738 struct completion *completion; 739 union xhci_trb *command_trb; 740 struct list_head cmd_list; 741 }; 742 743 /* drop context bitmasks */ 744 #define DROP_EP(x) (0x1 << x) 745 /* add context bitmasks */ 746 #define ADD_EP(x) (0x1 << x) 747 748 struct xhci_stream_ctx { 749 /* 64-bit stream ring address, cycle state, and stream type */ 750 __le64 stream_ring; 751 /* offset 0x14 - 0x1f reserved for HC internal use */ 752 __le32 reserved[2]; 753 }; 754 755 /* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */ 756 #define SCT_FOR_CTX(p) (((p) & 0x7) << 1) 757 /* Secondary stream array type, dequeue pointer is to a transfer ring */ 758 #define SCT_SEC_TR 0 759 /* Primary stream array type, dequeue pointer is to a transfer ring */ 760 #define SCT_PRI_TR 1 761 /* Dequeue pointer is for a secondary stream array (SSA) with 8 entries */ 762 #define SCT_SSA_8 2 763 #define SCT_SSA_16 3 764 #define SCT_SSA_32 4 765 #define SCT_SSA_64 5 766 #define SCT_SSA_128 6 767 #define SCT_SSA_256 7 768 769 /* Assume no secondary streams for now */ 770 struct xhci_stream_info { 771 struct xhci_ring **stream_rings; 772 /* Number of streams, including stream 0 (which drivers can't use) */ 773 unsigned int num_streams; 774 /* The stream context array may be bigger than 775 * the number of streams the driver asked for 776 */ 777 struct xhci_stream_ctx *stream_ctx_array; 778 unsigned int num_stream_ctxs; 779 dma_addr_t ctx_array_dma; 780 /* For mapping physical TRB addresses to segments in stream rings */ 781 struct radix_tree_root trb_address_map; 782 struct xhci_command *free_streams_command; 783 }; 784 785 #define SMALL_STREAM_ARRAY_SIZE 256 786 #define MEDIUM_STREAM_ARRAY_SIZE 1024 787 788 /* Some Intel xHCI host controllers need software to keep track of the bus 789 * bandwidth. Keep track of endpoint info here. Each root port is allocated 790 * the full bus bandwidth. We must also treat TTs (including each port under a 791 * multi-TT hub) as a separate bandwidth domain. The direct memory interface 792 * (DMI) also limits the total bandwidth (across all domains) that can be used. 793 */ 794 struct xhci_bw_info { 795 /* ep_interval is zero-based */ 796 unsigned int ep_interval; 797 /* mult and num_packets are one-based */ 798 unsigned int mult; 799 unsigned int num_packets; 800 unsigned int max_packet_size; 801 unsigned int max_esit_payload; 802 unsigned int type; 803 }; 804 805 /* "Block" sizes in bytes the hardware uses for different device speeds. 806 * The logic in this part of the hardware limits the number of bits the hardware 807 * can use, so must represent bandwidth in a less precise manner to mimic what 808 * the scheduler hardware computes. 809 */ 810 #define FS_BLOCK 1 811 #define HS_BLOCK 4 812 #define SS_BLOCK 16 813 #define DMI_BLOCK 32 814 815 /* Each device speed has a protocol overhead (CRC, bit stuffing, etc) associated 816 * with each byte transferred. SuperSpeed devices have an initial overhead to 817 * set up bursts. These are in blocks, see above. LS overhead has already been 818 * translated into FS blocks. 819 */ 820 #define DMI_OVERHEAD 8 821 #define DMI_OVERHEAD_BURST 4 822 #define SS_OVERHEAD 8 823 #define SS_OVERHEAD_BURST 32 824 #define HS_OVERHEAD 26 825 #define FS_OVERHEAD 20 826 #define LS_OVERHEAD 128 827 /* The TTs need to claim roughly twice as much bandwidth (94 bytes per 828 * microframe ~= 24Mbps) of the HS bus as the devices can actually use because 829 * of overhead associated with split transfers crossing microframe boundaries. 830 * 31 blocks is pure protocol overhead. 831 */ 832 #define TT_HS_OVERHEAD (31 + 94) 833 #define TT_DMI_OVERHEAD (25 + 12) 834 835 /* Bandwidth limits in blocks */ 836 #define FS_BW_LIMIT 1285 837 #define TT_BW_LIMIT 1320 838 #define HS_BW_LIMIT 1607 839 #define SS_BW_LIMIT_IN 3906 840 #define DMI_BW_LIMIT_IN 3906 841 #define SS_BW_LIMIT_OUT 3906 842 #define DMI_BW_LIMIT_OUT 3906 843 844 /* Percentage of bus bandwidth reserved for non-periodic transfers */ 845 #define FS_BW_RESERVED 10 846 #define HS_BW_RESERVED 20 847 #define SS_BW_RESERVED 10 848 849 struct xhci_virt_ep { 850 struct xhci_ring *ring; 851 /* Related to endpoints that are configured to use stream IDs only */ 852 struct xhci_stream_info *stream_info; 853 /* Temporary storage in case the configure endpoint command fails and we 854 * have to restore the device state to the previous state 855 */ 856 struct xhci_ring *new_ring; 857 unsigned int ep_state; 858 #define SET_DEQ_PENDING (1 << 0) 859 #define EP_HALTED (1 << 1) /* For stall handling */ 860 #define EP_HALT_PENDING (1 << 2) /* For URB cancellation */ 861 /* Transitioning the endpoint to using streams, don't enqueue URBs */ 862 #define EP_GETTING_STREAMS (1 << 3) 863 #define EP_HAS_STREAMS (1 << 4) 864 /* Transitioning the endpoint to not using streams, don't enqueue URBs */ 865 #define EP_GETTING_NO_STREAMS (1 << 5) 866 /* ---- Related to URB cancellation ---- */ 867 struct list_head cancelled_td_list; 868 struct xhci_td *stopped_td; 869 unsigned int stopped_stream; 870 /* Watchdog timer for stop endpoint command to cancel URBs */ 871 struct timer_list stop_cmd_timer; 872 int stop_cmds_pending; 873 struct xhci_hcd *xhci; 874 /* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue 875 * command. We'll need to update the ring's dequeue segment and dequeue 876 * pointer after the command completes. 877 */ 878 struct xhci_segment *queued_deq_seg; 879 union xhci_trb *queued_deq_ptr; 880 /* 881 * Sometimes the xHC can not process isochronous endpoint ring quickly 882 * enough, and it will miss some isoc tds on the ring and generate 883 * a Missed Service Error Event. 884 * Set skip flag when receive a Missed Service Error Event and 885 * process the missed tds on the endpoint ring. 886 */ 887 bool skip; 888 /* Bandwidth checking storage */ 889 struct xhci_bw_info bw_info; 890 struct list_head bw_endpoint_list; 891 }; 892 893 enum xhci_overhead_type { 894 LS_OVERHEAD_TYPE = 0, 895 FS_OVERHEAD_TYPE, 896 HS_OVERHEAD_TYPE, 897 }; 898 899 struct xhci_interval_bw { 900 unsigned int num_packets; 901 /* Sorted by max packet size. 902 * Head of the list is the greatest max packet size. 903 */ 904 struct list_head endpoints; 905 /* How many endpoints of each speed are present. */ 906 unsigned int overhead[3]; 907 }; 908 909 #define XHCI_MAX_INTERVAL 16 910 911 struct xhci_interval_bw_table { 912 unsigned int interval0_esit_payload; 913 struct xhci_interval_bw interval_bw[XHCI_MAX_INTERVAL]; 914 /* Includes reserved bandwidth for async endpoints */ 915 unsigned int bw_used; 916 unsigned int ss_bw_in; 917 unsigned int ss_bw_out; 918 }; 919 920 921 struct xhci_virt_device { 922 struct usb_device *udev; 923 /* 924 * Commands to the hardware are passed an "input context" that 925 * tells the hardware what to change in its data structures. 926 * The hardware will return changes in an "output context" that 927 * software must allocate for the hardware. We need to keep 928 * track of input and output contexts separately because 929 * these commands might fail and we don't trust the hardware. 930 */ 931 struct xhci_container_ctx *out_ctx; 932 /* Used for addressing devices and configuration changes */ 933 struct xhci_container_ctx *in_ctx; 934 /* Rings saved to ensure old alt settings can be re-instated */ 935 struct xhci_ring **ring_cache; 936 int num_rings_cached; 937 #define XHCI_MAX_RINGS_CACHED 31 938 struct xhci_virt_ep eps[31]; 939 struct completion cmd_completion; 940 u8 fake_port; 941 u8 real_port; 942 struct xhci_interval_bw_table *bw_table; 943 struct xhci_tt_bw_info *tt_info; 944 /* The current max exit latency for the enabled USB3 link states. */ 945 u16 current_mel; 946 }; 947 948 /* 949 * For each roothub, keep track of the bandwidth information for each periodic 950 * interval. 951 * 952 * If a high speed hub is attached to the roothub, each TT associated with that 953 * hub is a separate bandwidth domain. The interval information for the 954 * endpoints on the devices under that TT will appear in the TT structure. 955 */ 956 struct xhci_root_port_bw_info { 957 struct list_head tts; 958 unsigned int num_active_tts; 959 struct xhci_interval_bw_table bw_table; 960 }; 961 962 struct xhci_tt_bw_info { 963 struct list_head tt_list; 964 int slot_id; 965 int ttport; 966 struct xhci_interval_bw_table bw_table; 967 int active_eps; 968 }; 969 970 971 /** 972 * struct xhci_device_context_array 973 * @dev_context_ptr array of 64-bit DMA addresses for device contexts 974 */ 975 struct xhci_device_context_array { 976 /* 64-bit device addresses; we only write 32-bit addresses */ 977 __le64 dev_context_ptrs[MAX_HC_SLOTS]; 978 /* private xHCD pointers */ 979 dma_addr_t dma; 980 }; 981 /* TODO: write function to set the 64-bit device DMA address */ 982 /* 983 * TODO: change this to be dynamically sized at HC mem init time since the HC 984 * might not be able to handle the maximum number of devices possible. 985 */ 986 987 988 struct xhci_transfer_event { 989 /* 64-bit buffer address, or immediate data */ 990 __le64 buffer; 991 __le32 transfer_len; 992 /* This field is interpreted differently based on the type of TRB */ 993 __le32 flags; 994 }; 995 996 /* Transfer event TRB length bit mask */ 997 /* bits 0:23 */ 998 #define EVENT_TRB_LEN(p) ((p) & 0xffffff) 999 1000 /** Transfer Event bit fields **/ 1001 #define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f) 1002 1003 /* Completion Code - only applicable for some types of TRBs */ 1004 #define COMP_CODE_MASK (0xff << 24) 1005 #define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24) 1006 #define COMP_SUCCESS 1 1007 /* Data Buffer Error */ 1008 #define COMP_DB_ERR 2 1009 /* Babble Detected Error */ 1010 #define COMP_BABBLE 3 1011 /* USB Transaction Error */ 1012 #define COMP_TX_ERR 4 1013 /* TRB Error - some TRB field is invalid */ 1014 #define COMP_TRB_ERR 5 1015 /* Stall Error - USB device is stalled */ 1016 #define COMP_STALL 6 1017 /* Resource Error - HC doesn't have memory for that device configuration */ 1018 #define COMP_ENOMEM 7 1019 /* Bandwidth Error - not enough room in schedule for this dev config */ 1020 #define COMP_BW_ERR 8 1021 /* No Slots Available Error - HC ran out of device slots */ 1022 #define COMP_ENOSLOTS 9 1023 /* Invalid Stream Type Error */ 1024 #define COMP_STREAM_ERR 10 1025 /* Slot Not Enabled Error - doorbell rung for disabled device slot */ 1026 #define COMP_EBADSLT 11 1027 /* Endpoint Not Enabled Error */ 1028 #define COMP_EBADEP 12 1029 /* Short Packet */ 1030 #define COMP_SHORT_TX 13 1031 /* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */ 1032 #define COMP_UNDERRUN 14 1033 /* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */ 1034 #define COMP_OVERRUN 15 1035 /* Virtual Function Event Ring Full Error */ 1036 #define COMP_VF_FULL 16 1037 /* Parameter Error - Context parameter is invalid */ 1038 #define COMP_EINVAL 17 1039 /* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */ 1040 #define COMP_BW_OVER 18 1041 /* Context State Error - illegal context state transition requested */ 1042 #define COMP_CTX_STATE 19 1043 /* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */ 1044 #define COMP_PING_ERR 20 1045 /* Event Ring is full */ 1046 #define COMP_ER_FULL 21 1047 /* Incompatible Device Error */ 1048 #define COMP_DEV_ERR 22 1049 /* Missed Service Error - HC couldn't service an isoc ep within interval */ 1050 #define COMP_MISSED_INT 23 1051 /* Successfully stopped command ring */ 1052 #define COMP_CMD_STOP 24 1053 /* Successfully aborted current command and stopped command ring */ 1054 #define COMP_CMD_ABORT 25 1055 /* Stopped - transfer was terminated by a stop endpoint command */ 1056 #define COMP_STOP 26 1057 /* Same as COMP_EP_STOPPED, but the transferred length in the event is invalid */ 1058 #define COMP_STOP_INVAL 27 1059 /* Control Abort Error - Debug Capability - control pipe aborted */ 1060 #define COMP_DBG_ABORT 28 1061 /* Max Exit Latency Too Large Error */ 1062 #define COMP_MEL_ERR 29 1063 /* TRB type 30 reserved */ 1064 /* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */ 1065 #define COMP_BUFF_OVER 31 1066 /* Event Lost Error - xHC has an "internal event overrun condition" */ 1067 #define COMP_ISSUES 32 1068 /* Undefined Error - reported when other error codes don't apply */ 1069 #define COMP_UNKNOWN 33 1070 /* Invalid Stream ID Error */ 1071 #define COMP_STRID_ERR 34 1072 /* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */ 1073 #define COMP_2ND_BW_ERR 35 1074 /* Split Transaction Error */ 1075 #define COMP_SPLIT_ERR 36 1076 1077 struct xhci_link_trb { 1078 /* 64-bit segment pointer*/ 1079 __le64 segment_ptr; 1080 __le32 intr_target; 1081 __le32 control; 1082 }; 1083 1084 /* control bitfields */ 1085 #define LINK_TOGGLE (0x1<<1) 1086 1087 /* Command completion event TRB */ 1088 struct xhci_event_cmd { 1089 /* Pointer to command TRB, or the value passed by the event data trb */ 1090 __le64 cmd_trb; 1091 __le32 status; 1092 __le32 flags; 1093 }; 1094 1095 /* flags bitmasks */ 1096 1097 /* Address device - disable SetAddress */ 1098 #define TRB_BSR (1<<9) 1099 enum xhci_setup_dev { 1100 SETUP_CONTEXT_ONLY, 1101 SETUP_CONTEXT_ADDRESS, 1102 }; 1103 1104 /* bits 16:23 are the virtual function ID */ 1105 /* bits 24:31 are the slot ID */ 1106 #define TRB_TO_SLOT_ID(p) (((p) & (0xff<<24)) >> 24) 1107 #define SLOT_ID_FOR_TRB(p) (((p) & 0xff) << 24) 1108 1109 /* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */ 1110 #define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1) 1111 #define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16) 1112 1113 #define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23) 1114 #define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23) 1115 #define LAST_EP_INDEX 30 1116 1117 /* Set TR Dequeue Pointer command TRB fields, 6.4.3.9 */ 1118 #define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16)) 1119 #define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16) 1120 #define SCT_FOR_TRB(p) (((p) << 1) & 0x7) 1121 1122 1123 /* Port Status Change Event TRB fields */ 1124 /* Port ID - bits 31:24 */ 1125 #define GET_PORT_ID(p) (((p) & (0xff << 24)) >> 24) 1126 1127 /* Normal TRB fields */ 1128 /* transfer_len bitmasks - bits 0:16 */ 1129 #define TRB_LEN(p) ((p) & 0x1ffff) 1130 /* Interrupter Target - which MSI-X vector to target the completion event at */ 1131 #define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22) 1132 #define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff) 1133 #define TRB_TBC(p) (((p) & 0x3) << 7) 1134 #define TRB_TLBPC(p) (((p) & 0xf) << 16) 1135 1136 /* Cycle bit - indicates TRB ownership by HC or HCD */ 1137 #define TRB_CYCLE (1<<0) 1138 /* 1139 * Force next event data TRB to be evaluated before task switch. 1140 * Used to pass OS data back after a TD completes. 1141 */ 1142 #define TRB_ENT (1<<1) 1143 /* Interrupt on short packet */ 1144 #define TRB_ISP (1<<2) 1145 /* Set PCIe no snoop attribute */ 1146 #define TRB_NO_SNOOP (1<<3) 1147 /* Chain multiple TRBs into a TD */ 1148 #define TRB_CHAIN (1<<4) 1149 /* Interrupt on completion */ 1150 #define TRB_IOC (1<<5) 1151 /* The buffer pointer contains immediate data */ 1152 #define TRB_IDT (1<<6) 1153 1154 /* Block Event Interrupt */ 1155 #define TRB_BEI (1<<9) 1156 1157 /* Control transfer TRB specific fields */ 1158 #define TRB_DIR_IN (1<<16) 1159 #define TRB_TX_TYPE(p) ((p) << 16) 1160 #define TRB_DATA_OUT 2 1161 #define TRB_DATA_IN 3 1162 1163 /* Isochronous TRB specific fields */ 1164 #define TRB_SIA (1<<31) 1165 1166 struct xhci_generic_trb { 1167 __le32 field[4]; 1168 }; 1169 1170 union xhci_trb { 1171 struct xhci_link_trb link; 1172 struct xhci_transfer_event trans_event; 1173 struct xhci_event_cmd event_cmd; 1174 struct xhci_generic_trb generic; 1175 }; 1176 1177 /* TRB bit mask */ 1178 #define TRB_TYPE_BITMASK (0xfc00) 1179 #define TRB_TYPE(p) ((p) << 10) 1180 #define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10) 1181 /* TRB type IDs */ 1182 /* bulk, interrupt, isoc scatter/gather, and control data stage */ 1183 #define TRB_NORMAL 1 1184 /* setup stage for control transfers */ 1185 #define TRB_SETUP 2 1186 /* data stage for control transfers */ 1187 #define TRB_DATA 3 1188 /* status stage for control transfers */ 1189 #define TRB_STATUS 4 1190 /* isoc transfers */ 1191 #define TRB_ISOC 5 1192 /* TRB for linking ring segments */ 1193 #define TRB_LINK 6 1194 #define TRB_EVENT_DATA 7 1195 /* Transfer Ring No-op (not for the command ring) */ 1196 #define TRB_TR_NOOP 8 1197 /* Command TRBs */ 1198 /* Enable Slot Command */ 1199 #define TRB_ENABLE_SLOT 9 1200 /* Disable Slot Command */ 1201 #define TRB_DISABLE_SLOT 10 1202 /* Address Device Command */ 1203 #define TRB_ADDR_DEV 11 1204 /* Configure Endpoint Command */ 1205 #define TRB_CONFIG_EP 12 1206 /* Evaluate Context Command */ 1207 #define TRB_EVAL_CONTEXT 13 1208 /* Reset Endpoint Command */ 1209 #define TRB_RESET_EP 14 1210 /* Stop Transfer Ring Command */ 1211 #define TRB_STOP_RING 15 1212 /* Set Transfer Ring Dequeue Pointer Command */ 1213 #define TRB_SET_DEQ 16 1214 /* Reset Device Command */ 1215 #define TRB_RESET_DEV 17 1216 /* Force Event Command (opt) */ 1217 #define TRB_FORCE_EVENT 18 1218 /* Negotiate Bandwidth Command (opt) */ 1219 #define TRB_NEG_BANDWIDTH 19 1220 /* Set Latency Tolerance Value Command (opt) */ 1221 #define TRB_SET_LT 20 1222 /* Get port bandwidth Command */ 1223 #define TRB_GET_BW 21 1224 /* Force Header Command - generate a transaction or link management packet */ 1225 #define TRB_FORCE_HEADER 22 1226 /* No-op Command - not for transfer rings */ 1227 #define TRB_CMD_NOOP 23 1228 /* TRB IDs 24-31 reserved */ 1229 /* Event TRBS */ 1230 /* Transfer Event */ 1231 #define TRB_TRANSFER 32 1232 /* Command Completion Event */ 1233 #define TRB_COMPLETION 33 1234 /* Port Status Change Event */ 1235 #define TRB_PORT_STATUS 34 1236 /* Bandwidth Request Event (opt) */ 1237 #define TRB_BANDWIDTH_EVENT 35 1238 /* Doorbell Event (opt) */ 1239 #define TRB_DOORBELL 36 1240 /* Host Controller Event */ 1241 #define TRB_HC_EVENT 37 1242 /* Device Notification Event - device sent function wake notification */ 1243 #define TRB_DEV_NOTE 38 1244 /* MFINDEX Wrap Event - microframe counter wrapped */ 1245 #define TRB_MFINDEX_WRAP 39 1246 /* TRB IDs 40-47 reserved, 48-63 is vendor-defined */ 1247 1248 /* Nec vendor-specific command completion event. */ 1249 #define TRB_NEC_CMD_COMP 48 1250 /* Get NEC firmware revision. */ 1251 #define TRB_NEC_GET_FW 49 1252 1253 #define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK)) 1254 /* Above, but for __le32 types -- can avoid work by swapping constants: */ 1255 #define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \ 1256 cpu_to_le32(TRB_TYPE(TRB_LINK))) 1257 #define TRB_TYPE_NOOP_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \ 1258 cpu_to_le32(TRB_TYPE(TRB_TR_NOOP))) 1259 1260 #define NEC_FW_MINOR(p) (((p) >> 0) & 0xff) 1261 #define NEC_FW_MAJOR(p) (((p) >> 8) & 0xff) 1262 1263 /* 1264 * TRBS_PER_SEGMENT must be a multiple of 4, 1265 * since the command ring is 64-byte aligned. 1266 * It must also be greater than 16. 1267 */ 1268 #define TRBS_PER_SEGMENT 64 1269 /* Allow two commands + a link TRB, along with any reserved command TRBs */ 1270 #define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3) 1271 #define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16) 1272 #define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE)) 1273 /* TRB buffer pointers can't cross 64KB boundaries */ 1274 #define TRB_MAX_BUFF_SHIFT 16 1275 #define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT) 1276 1277 struct xhci_segment { 1278 union xhci_trb *trbs; 1279 /* private to HCD */ 1280 struct xhci_segment *next; 1281 dma_addr_t dma; 1282 }; 1283 1284 struct xhci_td { 1285 struct list_head td_list; 1286 struct list_head cancelled_td_list; 1287 struct urb *urb; 1288 struct xhci_segment *start_seg; 1289 union xhci_trb *first_trb; 1290 union xhci_trb *last_trb; 1291 }; 1292 1293 /* xHCI command default timeout value */ 1294 #define XHCI_CMD_DEFAULT_TIMEOUT (5 * HZ) 1295 1296 /* command descriptor */ 1297 struct xhci_cd { 1298 struct xhci_command *command; 1299 union xhci_trb *cmd_trb; 1300 }; 1301 1302 struct xhci_dequeue_state { 1303 struct xhci_segment *new_deq_seg; 1304 union xhci_trb *new_deq_ptr; 1305 int new_cycle_state; 1306 }; 1307 1308 enum xhci_ring_type { 1309 TYPE_CTRL = 0, 1310 TYPE_ISOC, 1311 TYPE_BULK, 1312 TYPE_INTR, 1313 TYPE_STREAM, 1314 TYPE_COMMAND, 1315 TYPE_EVENT, 1316 }; 1317 1318 struct xhci_ring { 1319 struct xhci_segment *first_seg; 1320 struct xhci_segment *last_seg; 1321 union xhci_trb *enqueue; 1322 struct xhci_segment *enq_seg; 1323 unsigned int enq_updates; 1324 union xhci_trb *dequeue; 1325 struct xhci_segment *deq_seg; 1326 unsigned int deq_updates; 1327 struct list_head td_list; 1328 /* 1329 * Write the cycle state into the TRB cycle field to give ownership of 1330 * the TRB to the host controller (if we are the producer), or to check 1331 * if we own the TRB (if we are the consumer). See section 4.9.1. 1332 */ 1333 u32 cycle_state; 1334 unsigned int stream_id; 1335 unsigned int num_segs; 1336 unsigned int num_trbs_free; 1337 unsigned int num_trbs_free_temp; 1338 enum xhci_ring_type type; 1339 bool last_td_was_short; 1340 struct radix_tree_root *trb_address_map; 1341 }; 1342 1343 struct xhci_erst_entry { 1344 /* 64-bit event ring segment address */ 1345 __le64 seg_addr; 1346 __le32 seg_size; 1347 /* Set to zero */ 1348 __le32 rsvd; 1349 }; 1350 1351 struct xhci_erst { 1352 struct xhci_erst_entry *entries; 1353 unsigned int num_entries; 1354 /* xhci->event_ring keeps track of segment dma addresses */ 1355 dma_addr_t erst_dma_addr; 1356 /* Num entries the ERST can contain */ 1357 unsigned int erst_size; 1358 }; 1359 1360 struct xhci_scratchpad { 1361 u64 *sp_array; 1362 dma_addr_t sp_dma; 1363 void **sp_buffers; 1364 dma_addr_t *sp_dma_buffers; 1365 }; 1366 1367 struct urb_priv { 1368 int length; 1369 int td_cnt; 1370 struct xhci_td *td[0]; 1371 }; 1372 1373 /* 1374 * Each segment table entry is 4*32bits long. 1K seems like an ok size: 1375 * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table, 1376 * meaning 64 ring segments. 1377 * Initial allocated size of the ERST, in number of entries */ 1378 #define ERST_NUM_SEGS 1 1379 /* Initial allocated size of the ERST, in number of entries */ 1380 #define ERST_SIZE 64 1381 /* Initial number of event segment rings allocated */ 1382 #define ERST_ENTRIES 1 1383 /* Poll every 60 seconds */ 1384 #define POLL_TIMEOUT 60 1385 /* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */ 1386 #define XHCI_STOP_EP_CMD_TIMEOUT 5 1387 /* XXX: Make these module parameters */ 1388 1389 struct s3_save { 1390 u32 command; 1391 u32 dev_nt; 1392 u64 dcbaa_ptr; 1393 u32 config_reg; 1394 u32 irq_pending; 1395 u32 irq_control; 1396 u32 erst_size; 1397 u64 erst_base; 1398 u64 erst_dequeue; 1399 }; 1400 1401 /* Use for lpm */ 1402 struct dev_info { 1403 u32 dev_id; 1404 struct list_head list; 1405 }; 1406 1407 struct xhci_bus_state { 1408 unsigned long bus_suspended; 1409 unsigned long next_statechange; 1410 1411 /* Port suspend arrays are indexed by the portnum of the fake roothub */ 1412 /* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */ 1413 u32 port_c_suspend; 1414 u32 suspended_ports; 1415 u32 port_remote_wakeup; 1416 unsigned long resume_done[USB_MAXCHILDREN]; 1417 /* which ports have started to resume */ 1418 unsigned long resuming_ports; 1419 /* Which ports are waiting on RExit to U0 transition. */ 1420 unsigned long rexit_ports; 1421 struct completion rexit_done[USB_MAXCHILDREN]; 1422 }; 1423 1424 1425 /* 1426 * It can take up to 20 ms to transition from RExit to U0 on the 1427 * Intel Lynx Point LP xHCI host. 1428 */ 1429 #define XHCI_MAX_REXIT_TIMEOUT (20 * 1000) 1430 1431 static inline unsigned int hcd_index(struct usb_hcd *hcd) 1432 { 1433 if (hcd->speed == HCD_USB3) 1434 return 0; 1435 else 1436 return 1; 1437 } 1438 1439 /* There is one xhci_hcd structure per controller */ 1440 struct xhci_hcd { 1441 struct usb_hcd *main_hcd; 1442 struct usb_hcd *shared_hcd; 1443 /* glue to PCI and HCD framework */ 1444 struct xhci_cap_regs __iomem *cap_regs; 1445 struct xhci_op_regs __iomem *op_regs; 1446 struct xhci_run_regs __iomem *run_regs; 1447 struct xhci_doorbell_array __iomem *dba; 1448 /* Our HCD's current interrupter register set */ 1449 struct xhci_intr_reg __iomem *ir_set; 1450 1451 /* Cached register copies of read-only HC data */ 1452 __u32 hcs_params1; 1453 __u32 hcs_params2; 1454 __u32 hcs_params3; 1455 __u32 hcc_params; 1456 1457 spinlock_t lock; 1458 1459 /* packed release number */ 1460 u8 sbrn; 1461 u16 hci_version; 1462 u8 max_slots; 1463 u8 max_interrupters; 1464 u8 max_ports; 1465 u8 isoc_threshold; 1466 int event_ring_max; 1467 int addr_64; 1468 /* 4KB min, 128MB max */ 1469 int page_size; 1470 /* Valid values are 12 to 20, inclusive */ 1471 int page_shift; 1472 /* msi-x vectors */ 1473 int msix_count; 1474 struct msix_entry *msix_entries; 1475 /* optional clock */ 1476 struct clk *clk; 1477 /* data structures */ 1478 struct xhci_device_context_array *dcbaa; 1479 struct xhci_ring *cmd_ring; 1480 unsigned int cmd_ring_state; 1481 #define CMD_RING_STATE_RUNNING (1 << 0) 1482 #define CMD_RING_STATE_ABORTED (1 << 1) 1483 #define CMD_RING_STATE_STOPPED (1 << 2) 1484 struct list_head cmd_list; 1485 unsigned int cmd_ring_reserved_trbs; 1486 struct timer_list cmd_timer; 1487 struct xhci_command *current_cmd; 1488 struct xhci_ring *event_ring; 1489 struct xhci_erst erst; 1490 /* Scratchpad */ 1491 struct xhci_scratchpad *scratchpad; 1492 /* Store LPM test failed devices' information */ 1493 struct list_head lpm_failed_devs; 1494 1495 /* slot enabling and address device helpers */ 1496 struct completion addr_dev; 1497 int slot_id; 1498 /* For USB 3.0 LPM enable/disable. */ 1499 struct xhci_command *lpm_command; 1500 /* Internal mirror of the HW's dcbaa */ 1501 struct xhci_virt_device *devs[MAX_HC_SLOTS]; 1502 /* For keeping track of bandwidth domains per roothub. */ 1503 struct xhci_root_port_bw_info *rh_bw; 1504 1505 /* DMA pools */ 1506 struct dma_pool *device_pool; 1507 struct dma_pool *segment_pool; 1508 struct dma_pool *small_streams_pool; 1509 struct dma_pool *medium_streams_pool; 1510 1511 /* Host controller watchdog timer structures */ 1512 unsigned int xhc_state; 1513 1514 u32 command; 1515 struct s3_save s3; 1516 /* Host controller is dying - not responding to commands. "I'm not dead yet!" 1517 * 1518 * xHC interrupts have been disabled and a watchdog timer will (or has already) 1519 * halt the xHCI host, and complete all URBs with an -ESHUTDOWN code. Any code 1520 * that sees this status (other than the timer that set it) should stop touching 1521 * hardware immediately. Interrupt handlers should return immediately when 1522 * they see this status (any time they drop and re-acquire xhci->lock). 1523 * xhci_urb_dequeue() should call usb_hcd_check_unlink_urb() and return without 1524 * putting the TD on the canceled list, etc. 1525 * 1526 * There are no reports of xHCI host controllers that display this issue. 1527 */ 1528 #define XHCI_STATE_DYING (1 << 0) 1529 #define XHCI_STATE_HALTED (1 << 1) 1530 /* Statistics */ 1531 int error_bitmask; 1532 unsigned int quirks; 1533 #define XHCI_LINK_TRB_QUIRK (1 << 0) 1534 #define XHCI_RESET_EP_QUIRK (1 << 1) 1535 #define XHCI_NEC_HOST (1 << 2) 1536 #define XHCI_AMD_PLL_FIX (1 << 3) 1537 #define XHCI_SPURIOUS_SUCCESS (1 << 4) 1538 /* 1539 * Certain Intel host controllers have a limit to the number of endpoint 1540 * contexts they can handle. Ideally, they would signal that they can't handle 1541 * anymore endpoint contexts by returning a Resource Error for the Configure 1542 * Endpoint command, but they don't. Instead they expect software to keep track 1543 * of the number of active endpoints for them, across configure endpoint 1544 * commands, reset device commands, disable slot commands, and address device 1545 * commands. 1546 */ 1547 #define XHCI_EP_LIMIT_QUIRK (1 << 5) 1548 #define XHCI_BROKEN_MSI (1 << 6) 1549 #define XHCI_RESET_ON_RESUME (1 << 7) 1550 #define XHCI_SW_BW_CHECKING (1 << 8) 1551 #define XHCI_AMD_0x96_HOST (1 << 9) 1552 #define XHCI_TRUST_TX_LENGTH (1 << 10) 1553 #define XHCI_LPM_SUPPORT (1 << 11) 1554 #define XHCI_INTEL_HOST (1 << 12) 1555 #define XHCI_SPURIOUS_REBOOT (1 << 13) 1556 #define XHCI_COMP_MODE_QUIRK (1 << 14) 1557 #define XHCI_AVOID_BEI (1 << 15) 1558 #define XHCI_PLAT (1 << 16) 1559 #define XHCI_SLOW_SUSPEND (1 << 17) 1560 #define XHCI_SPURIOUS_WAKEUP (1 << 18) 1561 /* For controllers with a broken beyond repair streams implementation */ 1562 #define XHCI_BROKEN_STREAMS (1 << 19) 1563 unsigned int num_active_eps; 1564 unsigned int limit_active_eps; 1565 /* There are two roothubs to keep track of bus suspend info for */ 1566 struct xhci_bus_state bus_state[2]; 1567 /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ 1568 u8 *port_array; 1569 /* Array of pointers to USB 3.0 PORTSC registers */ 1570 __le32 __iomem **usb3_ports; 1571 unsigned int num_usb3_ports; 1572 /* Array of pointers to USB 2.0 PORTSC registers */ 1573 __le32 __iomem **usb2_ports; 1574 unsigned int num_usb2_ports; 1575 /* support xHCI 0.96 spec USB2 software LPM */ 1576 unsigned sw_lpm_support:1; 1577 /* support xHCI 1.0 spec USB2 hardware LPM */ 1578 unsigned hw_lpm_support:1; 1579 /* cached usb2 extened protocol capabilites */ 1580 u32 *ext_caps; 1581 unsigned int num_ext_caps; 1582 /* Compliance Mode Recovery Data */ 1583 struct timer_list comp_mode_recovery_timer; 1584 u32 port_status_u0; 1585 /* Compliance Mode Timer Triggered every 2 seconds */ 1586 #define COMP_MODE_RCVRY_MSECS 2000 1587 }; 1588 1589 /* convert between an HCD pointer and the corresponding EHCI_HCD */ 1590 static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd) 1591 { 1592 return *((struct xhci_hcd **) (hcd->hcd_priv)); 1593 } 1594 1595 static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) 1596 { 1597 return xhci->main_hcd; 1598 } 1599 1600 #define xhci_dbg(xhci, fmt, args...) \ 1601 dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args) 1602 #define xhci_err(xhci, fmt, args...) \ 1603 dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args) 1604 #define xhci_warn(xhci, fmt, args...) \ 1605 dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args) 1606 #define xhci_warn_ratelimited(xhci, fmt, args...) \ 1607 dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args) 1608 1609 /* 1610 * Registers should always be accessed with double word or quad word accesses. 1611 * 1612 * Some xHCI implementations may support 64-bit address pointers. Registers 1613 * with 64-bit address pointers should be written to with dword accesses by 1614 * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second. 1615 * xHCI implementations that do not support 64-bit address pointers will ignore 1616 * the high dword, and write order is irrelevant. 1617 */ 1618 static inline u64 xhci_read_64(const struct xhci_hcd *xhci, 1619 __le64 __iomem *regs) 1620 { 1621 __u32 __iomem *ptr = (__u32 __iomem *) regs; 1622 u64 val_lo = readl(ptr); 1623 u64 val_hi = readl(ptr + 1); 1624 return val_lo + (val_hi << 32); 1625 } 1626 static inline void xhci_write_64(struct xhci_hcd *xhci, 1627 const u64 val, __le64 __iomem *regs) 1628 { 1629 __u32 __iomem *ptr = (__u32 __iomem *) regs; 1630 u32 val_lo = lower_32_bits(val); 1631 u32 val_hi = upper_32_bits(val); 1632 1633 writel(val_lo, ptr); 1634 writel(val_hi, ptr + 1); 1635 } 1636 1637 static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci) 1638 { 1639 return xhci->quirks & XHCI_LINK_TRB_QUIRK; 1640 } 1641 1642 /* xHCI debugging */ 1643 void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num); 1644 void xhci_print_registers(struct xhci_hcd *xhci); 1645 void xhci_dbg_regs(struct xhci_hcd *xhci); 1646 void xhci_print_run_regs(struct xhci_hcd *xhci); 1647 void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb); 1648 void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb); 1649 void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg); 1650 void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring); 1651 void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst); 1652 void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci); 1653 void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring); 1654 void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep); 1655 char *xhci_get_slot_state(struct xhci_hcd *xhci, 1656 struct xhci_container_ctx *ctx); 1657 void xhci_dbg_ep_rings(struct xhci_hcd *xhci, 1658 unsigned int slot_id, unsigned int ep_index, 1659 struct xhci_virt_ep *ep); 1660 void xhci_dbg_trace(struct xhci_hcd *xhci, void (*trace)(struct va_format *), 1661 const char *fmt, ...); 1662 1663 /* xHCI memory management */ 1664 void xhci_mem_cleanup(struct xhci_hcd *xhci); 1665 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags); 1666 void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id); 1667 int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags); 1668 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev); 1669 void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, 1670 struct usb_device *udev); 1671 unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc); 1672 unsigned int xhci_get_endpoint_address(unsigned int ep_index); 1673 unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc); 1674 unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index); 1675 unsigned int xhci_last_valid_endpoint(u32 added_ctxs); 1676 void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep); 1677 void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci, 1678 struct xhci_bw_info *ep_bw, 1679 struct xhci_interval_bw_table *bw_table, 1680 struct usb_device *udev, 1681 struct xhci_virt_ep *virt_ep, 1682 struct xhci_tt_bw_info *tt_info); 1683 void xhci_update_tt_active_eps(struct xhci_hcd *xhci, 1684 struct xhci_virt_device *virt_dev, 1685 int old_active_eps); 1686 void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info); 1687 void xhci_update_bw_info(struct xhci_hcd *xhci, 1688 struct xhci_container_ctx *in_ctx, 1689 struct xhci_input_control_ctx *ctrl_ctx, 1690 struct xhci_virt_device *virt_dev); 1691 void xhci_endpoint_copy(struct xhci_hcd *xhci, 1692 struct xhci_container_ctx *in_ctx, 1693 struct xhci_container_ctx *out_ctx, 1694 unsigned int ep_index); 1695 void xhci_slot_copy(struct xhci_hcd *xhci, 1696 struct xhci_container_ctx *in_ctx, 1697 struct xhci_container_ctx *out_ctx); 1698 int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, 1699 struct usb_device *udev, struct usb_host_endpoint *ep, 1700 gfp_t mem_flags); 1701 void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring); 1702 int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring, 1703 unsigned int num_trbs, gfp_t flags); 1704 void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci, 1705 struct xhci_virt_device *virt_dev, 1706 unsigned int ep_index); 1707 struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, 1708 unsigned int num_stream_ctxs, 1709 unsigned int num_streams, gfp_t flags); 1710 void xhci_free_stream_info(struct xhci_hcd *xhci, 1711 struct xhci_stream_info *stream_info); 1712 void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci, 1713 struct xhci_ep_ctx *ep_ctx, 1714 struct xhci_stream_info *stream_info); 1715 void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci, 1716 struct xhci_ep_ctx *ep_ctx, 1717 struct xhci_virt_ep *ep); 1718 void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci, 1719 struct xhci_virt_device *virt_dev, bool drop_control_ep); 1720 struct xhci_ring *xhci_dma_to_transfer_ring( 1721 struct xhci_virt_ep *ep, 1722 u64 address); 1723 struct xhci_ring *xhci_stream_id_to_ring( 1724 struct xhci_virt_device *dev, 1725 unsigned int ep_index, 1726 unsigned int stream_id); 1727 struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, 1728 bool allocate_in_ctx, bool allocate_completion, 1729 gfp_t mem_flags); 1730 void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv); 1731 void xhci_free_command(struct xhci_hcd *xhci, 1732 struct xhci_command *command); 1733 1734 /* xHCI host controller glue */ 1735 typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *); 1736 int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr, 1737 u32 mask, u32 done, int usec); 1738 void xhci_quiesce(struct xhci_hcd *xhci); 1739 int xhci_halt(struct xhci_hcd *xhci); 1740 int xhci_reset(struct xhci_hcd *xhci); 1741 int xhci_init(struct usb_hcd *hcd); 1742 int xhci_run(struct usb_hcd *hcd); 1743 void xhci_stop(struct usb_hcd *hcd); 1744 void xhci_shutdown(struct usb_hcd *hcd); 1745 int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks); 1746 void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *)); 1747 1748 #ifdef CONFIG_PM 1749 int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup); 1750 int xhci_resume(struct xhci_hcd *xhci, bool hibernated); 1751 #else 1752 #define xhci_suspend NULL 1753 #define xhci_resume NULL 1754 #endif 1755 1756 int xhci_get_frame(struct usb_hcd *hcd); 1757 irqreturn_t xhci_irq(struct usb_hcd *hcd); 1758 irqreturn_t xhci_msi_irq(int irq, void *hcd); 1759 int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev); 1760 void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev); 1761 int xhci_alloc_tt_info(struct xhci_hcd *xhci, 1762 struct xhci_virt_device *virt_dev, 1763 struct usb_device *hdev, 1764 struct usb_tt *tt, gfp_t mem_flags); 1765 int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, 1766 struct usb_host_endpoint **eps, unsigned int num_eps, 1767 unsigned int num_streams, gfp_t mem_flags); 1768 int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, 1769 struct usb_host_endpoint **eps, unsigned int num_eps, 1770 gfp_t mem_flags); 1771 int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev); 1772 int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev); 1773 int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev); 1774 int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, 1775 struct usb_device *udev, int enable); 1776 int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, 1777 struct usb_tt *tt, gfp_t mem_flags); 1778 int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags); 1779 int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); 1780 int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); 1781 int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); 1782 void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep); 1783 int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev); 1784 int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); 1785 void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); 1786 1787 /* xHCI ring, segment, TRB, and TD functions */ 1788 dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb); 1789 struct xhci_segment *trb_in_td(struct xhci_hcd *xhci, 1790 struct xhci_segment *start_seg, union xhci_trb *start_trb, 1791 union xhci_trb *end_trb, dma_addr_t suspect_dma, bool debug); 1792 int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code); 1793 void xhci_ring_cmd_db(struct xhci_hcd *xhci); 1794 int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd, 1795 u32 trb_type, u32 slot_id); 1796 int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd, 1797 dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev); 1798 int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd, 1799 u32 field1, u32 field2, u32 field3, u32 field4); 1800 int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd, 1801 int slot_id, unsigned int ep_index, int suspend); 1802 int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, 1803 int slot_id, unsigned int ep_index); 1804 int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, 1805 int slot_id, unsigned int ep_index); 1806 int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, 1807 int slot_id, unsigned int ep_index); 1808 int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, 1809 struct urb *urb, int slot_id, unsigned int ep_index); 1810 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, 1811 struct xhci_command *cmd, dma_addr_t in_ctx_ptr, u32 slot_id, 1812 bool command_must_succeed); 1813 int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd, 1814 dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed); 1815 int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd, 1816 int slot_id, unsigned int ep_index); 1817 int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd, 1818 u32 slot_id); 1819 void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, 1820 unsigned int slot_id, unsigned int ep_index, 1821 unsigned int stream_id, struct xhci_td *cur_td, 1822 struct xhci_dequeue_state *state); 1823 void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, 1824 unsigned int slot_id, unsigned int ep_index, 1825 unsigned int stream_id, 1826 struct xhci_dequeue_state *deq_state); 1827 void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, 1828 unsigned int ep_index, struct xhci_td *td); 1829 void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci, 1830 unsigned int slot_id, unsigned int ep_index, 1831 struct xhci_dequeue_state *deq_state); 1832 void xhci_stop_endpoint_command_watchdog(unsigned long arg); 1833 void xhci_handle_command_timeout(unsigned long data); 1834 1835 void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, 1836 unsigned int ep_index, unsigned int stream_id); 1837 void xhci_cleanup_command_queue(struct xhci_hcd *xhci); 1838 1839 /* xHCI roothub code */ 1840 void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, 1841 int port_id, u32 link_state); 1842 int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, 1843 struct usb_device *udev, enum usb3_link_state state); 1844 int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, 1845 struct usb_device *udev, enum usb3_link_state state); 1846 void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, 1847 int port_id, u32 port_bit); 1848 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, 1849 char *buf, u16 wLength); 1850 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf); 1851 int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1); 1852 1853 #ifdef CONFIG_PM 1854 int xhci_bus_suspend(struct usb_hcd *hcd); 1855 int xhci_bus_resume(struct usb_hcd *hcd); 1856 #else 1857 #define xhci_bus_suspend NULL 1858 #define xhci_bus_resume NULL 1859 #endif /* CONFIG_PM */ 1860 1861 u32 xhci_port_state_to_neutral(u32 state); 1862 int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, 1863 u16 port); 1864 void xhci_ring_device(struct xhci_hcd *xhci, int slot_id); 1865 1866 /* xHCI contexts */ 1867 struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); 1868 struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); 1869 struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index); 1870 1871 #endif /* __LINUX_XHCI_HCD_H */ 1872