1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * xhci-plat.c - xHCI host controller driver platform Bus Glue. 4 * 5 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com 6 * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> 7 * 8 * A lot of code borrowed from the Linux xHCI driver. 9 */ 10 11 #include <linux/clk.h> 12 #include <linux/dma-mapping.h> 13 #include <linux/module.h> 14 #include <linux/pci.h> 15 #include <linux/of.h> 16 #include <linux/of_device.h> 17 #include <linux/platform_device.h> 18 #include <linux/usb/phy.h> 19 #include <linux/slab.h> 20 #include <linux/acpi.h> 21 22 #include "xhci.h" 23 #include "xhci-plat.h" 24 #include "xhci-mvebu.h" 25 #include "xhci-rcar.h" 26 27 static struct hc_driver __read_mostly xhci_plat_hc_driver; 28 29 static int xhci_plat_setup(struct usb_hcd *hcd); 30 static int xhci_plat_start(struct usb_hcd *hcd); 31 32 static const struct xhci_driver_overrides xhci_plat_overrides __initconst = { 33 .extra_priv_size = sizeof(struct xhci_plat_priv), 34 .reset = xhci_plat_setup, 35 .start = xhci_plat_start, 36 }; 37 38 static void xhci_priv_plat_start(struct usb_hcd *hcd) 39 { 40 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); 41 42 if (priv->plat_start) 43 priv->plat_start(hcd); 44 } 45 46 static int xhci_priv_init_quirk(struct usb_hcd *hcd) 47 { 48 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); 49 50 if (!priv->init_quirk) 51 return 0; 52 53 return priv->init_quirk(hcd); 54 } 55 56 static int xhci_priv_resume_quirk(struct usb_hcd *hcd) 57 { 58 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); 59 60 if (!priv->resume_quirk) 61 return 0; 62 63 return priv->resume_quirk(hcd); 64 } 65 66 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) 67 { 68 /* 69 * As of now platform drivers don't provide MSI support so we ensure 70 * here that the generic code does not try to make a pci_dev from our 71 * dev struct in order to setup MSI 72 */ 73 xhci->quirks |= XHCI_PLAT; 74 } 75 76 /* called during probe() after chip reset completes */ 77 static int xhci_plat_setup(struct usb_hcd *hcd) 78 { 79 int ret; 80 81 82 ret = xhci_priv_init_quirk(hcd); 83 if (ret) 84 return ret; 85 86 return xhci_gen_setup(hcd, xhci_plat_quirks); 87 } 88 89 static int xhci_plat_start(struct usb_hcd *hcd) 90 { 91 xhci_priv_plat_start(hcd); 92 return xhci_run(hcd); 93 } 94 95 #ifdef CONFIG_OF 96 static const struct xhci_plat_priv xhci_plat_marvell_armada = { 97 .init_quirk = xhci_mvebu_mbus_init_quirk, 98 }; 99 100 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { 101 .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1, 102 .init_quirk = xhci_rcar_init_quirk, 103 .plat_start = xhci_rcar_start, 104 .resume_quirk = xhci_rcar_resume_quirk, 105 }; 106 107 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { 108 .init_quirk = xhci_rcar_init_quirk, 109 .plat_start = xhci_rcar_start, 110 .resume_quirk = xhci_rcar_resume_quirk, 111 }; 112 113 static const struct of_device_id usb_xhci_of_match[] = { 114 { 115 .compatible = "generic-xhci", 116 }, { 117 .compatible = "xhci-platform", 118 }, { 119 .compatible = "marvell,armada-375-xhci", 120 .data = &xhci_plat_marvell_armada, 121 }, { 122 .compatible = "marvell,armada-380-xhci", 123 .data = &xhci_plat_marvell_armada, 124 }, { 125 .compatible = "renesas,xhci-r8a7790", 126 .data = &xhci_plat_renesas_rcar_gen2, 127 }, { 128 .compatible = "renesas,xhci-r8a7791", 129 .data = &xhci_plat_renesas_rcar_gen2, 130 }, { 131 .compatible = "renesas,xhci-r8a7793", 132 .data = &xhci_plat_renesas_rcar_gen2, 133 }, { 134 .compatible = "renesas,xhci-r8a7795", 135 .data = &xhci_plat_renesas_rcar_gen3, 136 }, { 137 .compatible = "renesas,xhci-r8a7796", 138 .data = &xhci_plat_renesas_rcar_gen3, 139 }, { 140 .compatible = "renesas,rcar-gen2-xhci", 141 .data = &xhci_plat_renesas_rcar_gen2, 142 }, { 143 .compatible = "renesas,rcar-gen3-xhci", 144 .data = &xhci_plat_renesas_rcar_gen3, 145 }, 146 {}, 147 }; 148 MODULE_DEVICE_TABLE(of, usb_xhci_of_match); 149 #endif 150 151 static int xhci_plat_probe(struct platform_device *pdev) 152 { 153 const struct xhci_plat_priv *priv_match; 154 const struct hc_driver *driver; 155 struct device *sysdev; 156 struct xhci_hcd *xhci; 157 struct resource *res; 158 struct usb_hcd *hcd; 159 struct clk *clk; 160 int ret; 161 int irq; 162 163 if (usb_disabled()) 164 return -ENODEV; 165 166 driver = &xhci_plat_hc_driver; 167 168 irq = platform_get_irq(pdev, 0); 169 if (irq < 0) 170 return irq; 171 172 /* 173 * sysdev must point to a device that is known to the system firmware 174 * or PCI hardware. We handle these three cases here: 175 * 1. xhci_plat comes from firmware 176 * 2. xhci_plat is child of a device from firmware (dwc3-plat) 177 * 3. xhci_plat is grandchild of a pci device (dwc3-pci) 178 */ 179 for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) { 180 if (is_of_node(sysdev->fwnode) || 181 is_acpi_device_node(sysdev->fwnode)) 182 break; 183 #ifdef CONFIG_PCI 184 else if (sysdev->bus == &pci_bus_type) 185 break; 186 #endif 187 } 188 189 if (!sysdev) 190 sysdev = &pdev->dev; 191 192 /* Try to set 64-bit DMA first */ 193 if (WARN_ON(!sysdev->dma_mask)) 194 /* Platform did not initialize dma_mask */ 195 ret = dma_coerce_mask_and_coherent(sysdev, 196 DMA_BIT_MASK(64)); 197 else 198 ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64)); 199 200 /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */ 201 if (ret) { 202 ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32)); 203 if (ret) 204 return ret; 205 } 206 207 pm_runtime_set_active(&pdev->dev); 208 pm_runtime_enable(&pdev->dev); 209 pm_runtime_get_noresume(&pdev->dev); 210 211 hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, 212 dev_name(&pdev->dev), NULL); 213 if (!hcd) { 214 ret = -ENOMEM; 215 goto disable_runtime; 216 } 217 218 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 219 hcd->regs = devm_ioremap_resource(&pdev->dev, res); 220 if (IS_ERR(hcd->regs)) { 221 ret = PTR_ERR(hcd->regs); 222 goto put_hcd; 223 } 224 225 hcd->rsrc_start = res->start; 226 hcd->rsrc_len = resource_size(res); 227 228 /* 229 * Not all platforms have a clk so it is not an error if the 230 * clock does not exists. 231 */ 232 clk = devm_clk_get(&pdev->dev, NULL); 233 if (!IS_ERR(clk)) { 234 ret = clk_prepare_enable(clk); 235 if (ret) 236 goto put_hcd; 237 } else if (PTR_ERR(clk) == -EPROBE_DEFER) { 238 ret = -EPROBE_DEFER; 239 goto put_hcd; 240 } 241 242 xhci = hcd_to_xhci(hcd); 243 priv_match = of_device_get_match_data(&pdev->dev); 244 if (priv_match) { 245 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); 246 247 /* Just copy data for now */ 248 if (priv_match) 249 *priv = *priv_match; 250 } 251 252 device_wakeup_enable(hcd->self.controller); 253 254 xhci->clk = clk; 255 xhci->main_hcd = hcd; 256 xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, 257 dev_name(&pdev->dev), hcd); 258 if (!xhci->shared_hcd) { 259 ret = -ENOMEM; 260 goto disable_clk; 261 } 262 263 if (device_property_read_bool(sysdev, "usb2-lpm-disable")) 264 xhci->quirks |= XHCI_HW_LPM_DISABLE; 265 266 if (device_property_read_bool(sysdev, "usb3-lpm-capable")) 267 xhci->quirks |= XHCI_LPM_SUPPORT; 268 269 if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped")) 270 xhci->quirks |= XHCI_BROKEN_PORT_PED; 271 272 /* imod_interval is the interrupt moderation value in nanoseconds. */ 273 xhci->imod_interval = 40000; 274 device_property_read_u32(sysdev, "imod-interval-ns", 275 &xhci->imod_interval); 276 277 hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0); 278 if (IS_ERR(hcd->usb_phy)) { 279 ret = PTR_ERR(hcd->usb_phy); 280 if (ret == -EPROBE_DEFER) 281 goto put_usb3_hcd; 282 hcd->usb_phy = NULL; 283 } else { 284 ret = usb_phy_init(hcd->usb_phy); 285 if (ret) 286 goto put_usb3_hcd; 287 hcd->skip_phy_initialization = 1; 288 } 289 290 ret = usb_add_hcd(hcd, irq, IRQF_SHARED); 291 if (ret) 292 goto disable_usb_phy; 293 294 if (HCC_MAX_PSA(xhci->hcc_params) >= 4) 295 xhci->shared_hcd->can_do_streams = 1; 296 297 ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); 298 if (ret) 299 goto dealloc_usb2_hcd; 300 301 device_enable_async_suspend(&pdev->dev); 302 pm_runtime_put_noidle(&pdev->dev); 303 304 /* 305 * Prevent runtime pm from being on as default, users should enable 306 * runtime pm using power/control in sysfs. 307 */ 308 pm_runtime_forbid(&pdev->dev); 309 310 return 0; 311 312 313 dealloc_usb2_hcd: 314 usb_remove_hcd(hcd); 315 316 disable_usb_phy: 317 usb_phy_shutdown(hcd->usb_phy); 318 319 put_usb3_hcd: 320 usb_put_hcd(xhci->shared_hcd); 321 322 disable_clk: 323 if (!IS_ERR(clk)) 324 clk_disable_unprepare(clk); 325 326 put_hcd: 327 usb_put_hcd(hcd); 328 329 disable_runtime: 330 pm_runtime_put_noidle(&pdev->dev); 331 pm_runtime_disable(&pdev->dev); 332 333 return ret; 334 } 335 336 static int xhci_plat_remove(struct platform_device *dev) 337 { 338 struct usb_hcd *hcd = platform_get_drvdata(dev); 339 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 340 struct clk *clk = xhci->clk; 341 342 xhci->xhc_state |= XHCI_STATE_REMOVING; 343 344 usb_remove_hcd(xhci->shared_hcd); 345 usb_phy_shutdown(hcd->usb_phy); 346 347 usb_remove_hcd(hcd); 348 usb_put_hcd(xhci->shared_hcd); 349 350 if (!IS_ERR(clk)) 351 clk_disable_unprepare(clk); 352 usb_put_hcd(hcd); 353 354 pm_runtime_set_suspended(&dev->dev); 355 pm_runtime_disable(&dev->dev); 356 357 return 0; 358 } 359 360 static int __maybe_unused xhci_plat_suspend(struct device *dev) 361 { 362 struct usb_hcd *hcd = dev_get_drvdata(dev); 363 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 364 365 /* 366 * xhci_suspend() needs `do_wakeup` to know whether host is allowed 367 * to do wakeup during suspend. Since xhci_plat_suspend is currently 368 * only designed for system suspend, device_may_wakeup() is enough 369 * to dertermine whether host is allowed to do wakeup. Need to 370 * reconsider this when xhci_plat_suspend enlarges its scope, e.g., 371 * also applies to runtime suspend. 372 */ 373 return xhci_suspend(xhci, device_may_wakeup(dev)); 374 } 375 376 static int __maybe_unused xhci_plat_resume(struct device *dev) 377 { 378 struct usb_hcd *hcd = dev_get_drvdata(dev); 379 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 380 int ret; 381 382 ret = xhci_priv_resume_quirk(hcd); 383 if (ret) 384 return ret; 385 386 return xhci_resume(xhci, 0); 387 } 388 389 static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) 390 { 391 struct usb_hcd *hcd = dev_get_drvdata(dev); 392 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 393 394 return xhci_suspend(xhci, true); 395 } 396 397 static int __maybe_unused xhci_plat_runtime_resume(struct device *dev) 398 { 399 struct usb_hcd *hcd = dev_get_drvdata(dev); 400 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 401 402 return xhci_resume(xhci, 0); 403 } 404 405 static const struct dev_pm_ops xhci_plat_pm_ops = { 406 SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) 407 408 SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, 409 xhci_plat_runtime_resume, 410 NULL) 411 }; 412 413 static const struct acpi_device_id usb_xhci_acpi_match[] = { 414 /* XHCI-compliant USB Controller */ 415 { "PNP0D10", }, 416 { } 417 }; 418 MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match); 419 420 static struct platform_driver usb_xhci_driver = { 421 .probe = xhci_plat_probe, 422 .remove = xhci_plat_remove, 423 .shutdown = usb_hcd_platform_shutdown, 424 .driver = { 425 .name = "xhci-hcd", 426 .pm = &xhci_plat_pm_ops, 427 .of_match_table = of_match_ptr(usb_xhci_of_match), 428 .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match), 429 }, 430 }; 431 MODULE_ALIAS("platform:xhci-hcd"); 432 433 static int __init xhci_plat_init(void) 434 { 435 xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides); 436 return platform_driver_register(&usb_xhci_driver); 437 } 438 module_init(xhci_plat_init); 439 440 static void __exit xhci_plat_exit(void) 441 { 442 platform_driver_unregister(&usb_xhci_driver); 443 } 444 module_exit(xhci_plat_exit); 445 446 MODULE_DESCRIPTION("xHCI Platform Host Controller Driver"); 447 MODULE_LICENSE("GPL"); 448