1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * xhci-plat.c - xHCI host controller driver platform Bus Glue. 4 * 5 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com 6 * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> 7 * 8 * A lot of code borrowed from the Linux xHCI driver. 9 */ 10 11 #include <linux/clk.h> 12 #include <linux/dma-mapping.h> 13 #include <linux/module.h> 14 #include <linux/pci.h> 15 #include <linux/of.h> 16 #include <linux/of_device.h> 17 #include <linux/platform_device.h> 18 #include <linux/usb/phy.h> 19 #include <linux/slab.h> 20 #include <linux/acpi.h> 21 #include <linux/usb/of.h> 22 23 #include "xhci.h" 24 #include "xhci-plat.h" 25 #include "xhci-mvebu.h" 26 #include "xhci-rcar.h" 27 28 static struct hc_driver __read_mostly xhci_plat_hc_driver; 29 30 static int xhci_plat_setup(struct usb_hcd *hcd); 31 static int xhci_plat_start(struct usb_hcd *hcd); 32 33 static const struct xhci_driver_overrides xhci_plat_overrides __initconst = { 34 .extra_priv_size = sizeof(struct xhci_plat_priv), 35 .reset = xhci_plat_setup, 36 .start = xhci_plat_start, 37 }; 38 39 static void xhci_priv_plat_start(struct usb_hcd *hcd) 40 { 41 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); 42 43 if (priv->plat_start) 44 priv->plat_start(hcd); 45 } 46 47 static int xhci_priv_init_quirk(struct usb_hcd *hcd) 48 { 49 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); 50 51 if (!priv->init_quirk) 52 return 0; 53 54 return priv->init_quirk(hcd); 55 } 56 57 static int xhci_priv_resume_quirk(struct usb_hcd *hcd) 58 { 59 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); 60 61 if (!priv->resume_quirk) 62 return 0; 63 64 return priv->resume_quirk(hcd); 65 } 66 67 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) 68 { 69 struct xhci_plat_priv *priv = xhci_to_priv(xhci); 70 71 /* 72 * As of now platform drivers don't provide MSI support so we ensure 73 * here that the generic code does not try to make a pci_dev from our 74 * dev struct in order to setup MSI 75 */ 76 xhci->quirks |= XHCI_PLAT | priv->quirks; 77 } 78 79 /* called during probe() after chip reset completes */ 80 static int xhci_plat_setup(struct usb_hcd *hcd) 81 { 82 int ret; 83 84 85 ret = xhci_priv_init_quirk(hcd); 86 if (ret) 87 return ret; 88 89 return xhci_gen_setup(hcd, xhci_plat_quirks); 90 } 91 92 static int xhci_plat_start(struct usb_hcd *hcd) 93 { 94 xhci_priv_plat_start(hcd); 95 return xhci_run(hcd); 96 } 97 98 #ifdef CONFIG_OF 99 static const struct xhci_plat_priv xhci_plat_marvell_armada = { 100 .init_quirk = xhci_mvebu_mbus_init_quirk, 101 }; 102 103 static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { 104 .init_quirk = xhci_mvebu_a3700_init_quirk, 105 }; 106 107 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { 108 SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V1) 109 }; 110 111 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { 112 SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V3) 113 }; 114 115 static const struct xhci_plat_priv xhci_plat_brcm = { 116 .quirks = XHCI_RESET_ON_RESUME, 117 }; 118 119 static const struct of_device_id usb_xhci_of_match[] = { 120 { 121 .compatible = "generic-xhci", 122 }, { 123 .compatible = "xhci-platform", 124 }, { 125 .compatible = "marvell,armada-375-xhci", 126 .data = &xhci_plat_marvell_armada, 127 }, { 128 .compatible = "marvell,armada-380-xhci", 129 .data = &xhci_plat_marvell_armada, 130 }, { 131 .compatible = "marvell,armada3700-xhci", 132 .data = &xhci_plat_marvell_armada3700, 133 }, { 134 .compatible = "renesas,xhci-r8a7790", 135 .data = &xhci_plat_renesas_rcar_gen2, 136 }, { 137 .compatible = "renesas,xhci-r8a7791", 138 .data = &xhci_plat_renesas_rcar_gen2, 139 }, { 140 .compatible = "renesas,xhci-r8a7793", 141 .data = &xhci_plat_renesas_rcar_gen2, 142 }, { 143 .compatible = "renesas,xhci-r8a7795", 144 .data = &xhci_plat_renesas_rcar_gen3, 145 }, { 146 .compatible = "renesas,xhci-r8a7796", 147 .data = &xhci_plat_renesas_rcar_gen3, 148 }, { 149 .compatible = "renesas,rcar-gen2-xhci", 150 .data = &xhci_plat_renesas_rcar_gen2, 151 }, { 152 .compatible = "renesas,rcar-gen3-xhci", 153 .data = &xhci_plat_renesas_rcar_gen3, 154 }, { 155 .compatible = "brcm,xhci-brcm-v2", 156 .data = &xhci_plat_brcm, 157 }, { 158 .compatible = "brcm,bcm7445-xhci", 159 .data = &xhci_plat_brcm, 160 }, 161 {}, 162 }; 163 MODULE_DEVICE_TABLE(of, usb_xhci_of_match); 164 #endif 165 166 static int xhci_plat_probe(struct platform_device *pdev) 167 { 168 const struct xhci_plat_priv *priv_match; 169 const struct hc_driver *driver; 170 struct device *sysdev, *tmpdev; 171 struct xhci_hcd *xhci; 172 struct resource *res; 173 struct usb_hcd *hcd; 174 int ret; 175 int irq; 176 177 if (usb_disabled()) 178 return -ENODEV; 179 180 driver = &xhci_plat_hc_driver; 181 182 irq = platform_get_irq(pdev, 0); 183 if (irq < 0) 184 return irq; 185 186 /* 187 * sysdev must point to a device that is known to the system firmware 188 * or PCI hardware. We handle these three cases here: 189 * 1. xhci_plat comes from firmware 190 * 2. xhci_plat is child of a device from firmware (dwc3-plat) 191 * 3. xhci_plat is grandchild of a pci device (dwc3-pci) 192 */ 193 for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) { 194 if (is_of_node(sysdev->fwnode) || 195 is_acpi_device_node(sysdev->fwnode)) 196 break; 197 #ifdef CONFIG_PCI 198 else if (sysdev->bus == &pci_bus_type) 199 break; 200 #endif 201 } 202 203 if (!sysdev) 204 sysdev = &pdev->dev; 205 206 /* Try to set 64-bit DMA first */ 207 if (WARN_ON(!sysdev->dma_mask)) 208 /* Platform did not initialize dma_mask */ 209 ret = dma_coerce_mask_and_coherent(sysdev, 210 DMA_BIT_MASK(64)); 211 else 212 ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64)); 213 214 /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */ 215 if (ret) { 216 ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32)); 217 if (ret) 218 return ret; 219 } 220 221 pm_runtime_set_active(&pdev->dev); 222 pm_runtime_enable(&pdev->dev); 223 pm_runtime_get_noresume(&pdev->dev); 224 225 hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, 226 dev_name(&pdev->dev), NULL); 227 if (!hcd) { 228 ret = -ENOMEM; 229 goto disable_runtime; 230 } 231 232 hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res); 233 if (IS_ERR(hcd->regs)) { 234 ret = PTR_ERR(hcd->regs); 235 goto put_hcd; 236 } 237 238 hcd->rsrc_start = res->start; 239 hcd->rsrc_len = resource_size(res); 240 241 xhci = hcd_to_xhci(hcd); 242 243 /* 244 * Not all platforms have clks so it is not an error if the 245 * clock do not exist. 246 */ 247 xhci->reg_clk = devm_clk_get_optional(&pdev->dev, "reg"); 248 if (IS_ERR(xhci->reg_clk)) { 249 ret = PTR_ERR(xhci->reg_clk); 250 goto put_hcd; 251 } 252 253 ret = clk_prepare_enable(xhci->reg_clk); 254 if (ret) 255 goto put_hcd; 256 257 xhci->clk = devm_clk_get_optional(&pdev->dev, NULL); 258 if (IS_ERR(xhci->clk)) { 259 ret = PTR_ERR(xhci->clk); 260 goto disable_reg_clk; 261 } 262 263 ret = clk_prepare_enable(xhci->clk); 264 if (ret) 265 goto disable_reg_clk; 266 267 priv_match = of_device_get_match_data(&pdev->dev); 268 if (priv_match) { 269 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); 270 271 /* Just copy data for now */ 272 if (priv_match) 273 *priv = *priv_match; 274 } 275 276 device_wakeup_enable(hcd->self.controller); 277 278 xhci->main_hcd = hcd; 279 xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, 280 dev_name(&pdev->dev), hcd); 281 if (!xhci->shared_hcd) { 282 ret = -ENOMEM; 283 goto disable_clk; 284 } 285 286 /* imod_interval is the interrupt moderation value in nanoseconds. */ 287 xhci->imod_interval = 40000; 288 289 /* Iterate over all parent nodes for finding quirks */ 290 for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) { 291 292 if (device_property_read_bool(tmpdev, "usb2-lpm-disable")) 293 xhci->quirks |= XHCI_HW_LPM_DISABLE; 294 295 if (device_property_read_bool(tmpdev, "usb3-lpm-capable")) 296 xhci->quirks |= XHCI_LPM_SUPPORT; 297 298 if (device_property_read_bool(tmpdev, "quirk-broken-port-ped")) 299 xhci->quirks |= XHCI_BROKEN_PORT_PED; 300 301 device_property_read_u32(tmpdev, "imod-interval-ns", 302 &xhci->imod_interval); 303 } 304 305 hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0); 306 if (IS_ERR(hcd->usb_phy)) { 307 ret = PTR_ERR(hcd->usb_phy); 308 if (ret == -EPROBE_DEFER) 309 goto put_usb3_hcd; 310 hcd->usb_phy = NULL; 311 } else { 312 ret = usb_phy_init(hcd->usb_phy); 313 if (ret) 314 goto put_usb3_hcd; 315 } 316 317 hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); 318 xhci->shared_hcd->tpl_support = hcd->tpl_support; 319 ret = usb_add_hcd(hcd, irq, IRQF_SHARED); 320 if (ret) 321 goto disable_usb_phy; 322 323 if (HCC_MAX_PSA(xhci->hcc_params) >= 4) 324 xhci->shared_hcd->can_do_streams = 1; 325 326 ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); 327 if (ret) 328 goto dealloc_usb2_hcd; 329 330 device_enable_async_suspend(&pdev->dev); 331 pm_runtime_put_noidle(&pdev->dev); 332 333 /* 334 * Prevent runtime pm from being on as default, users should enable 335 * runtime pm using power/control in sysfs. 336 */ 337 pm_runtime_forbid(&pdev->dev); 338 339 return 0; 340 341 342 dealloc_usb2_hcd: 343 usb_remove_hcd(hcd); 344 345 disable_usb_phy: 346 usb_phy_shutdown(hcd->usb_phy); 347 348 put_usb3_hcd: 349 usb_put_hcd(xhci->shared_hcd); 350 351 disable_clk: 352 clk_disable_unprepare(xhci->clk); 353 354 disable_reg_clk: 355 clk_disable_unprepare(xhci->reg_clk); 356 357 put_hcd: 358 usb_put_hcd(hcd); 359 360 disable_runtime: 361 pm_runtime_put_noidle(&pdev->dev); 362 pm_runtime_disable(&pdev->dev); 363 364 return ret; 365 } 366 367 static int xhci_plat_remove(struct platform_device *dev) 368 { 369 struct usb_hcd *hcd = platform_get_drvdata(dev); 370 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 371 struct clk *clk = xhci->clk; 372 struct clk *reg_clk = xhci->reg_clk; 373 struct usb_hcd *shared_hcd = xhci->shared_hcd; 374 375 pm_runtime_get_sync(&dev->dev); 376 xhci->xhc_state |= XHCI_STATE_REMOVING; 377 378 usb_remove_hcd(shared_hcd); 379 xhci->shared_hcd = NULL; 380 usb_phy_shutdown(hcd->usb_phy); 381 382 usb_remove_hcd(hcd); 383 usb_put_hcd(shared_hcd); 384 385 clk_disable_unprepare(clk); 386 clk_disable_unprepare(reg_clk); 387 usb_put_hcd(hcd); 388 389 pm_runtime_disable(&dev->dev); 390 pm_runtime_put_noidle(&dev->dev); 391 pm_runtime_set_suspended(&dev->dev); 392 393 return 0; 394 } 395 396 static int __maybe_unused xhci_plat_suspend(struct device *dev) 397 { 398 struct usb_hcd *hcd = dev_get_drvdata(dev); 399 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 400 401 /* 402 * xhci_suspend() needs `do_wakeup` to know whether host is allowed 403 * to do wakeup during suspend. Since xhci_plat_suspend is currently 404 * only designed for system suspend, device_may_wakeup() is enough 405 * to dertermine whether host is allowed to do wakeup. Need to 406 * reconsider this when xhci_plat_suspend enlarges its scope, e.g., 407 * also applies to runtime suspend. 408 */ 409 return xhci_suspend(xhci, device_may_wakeup(dev)); 410 } 411 412 static int __maybe_unused xhci_plat_resume(struct device *dev) 413 { 414 struct usb_hcd *hcd = dev_get_drvdata(dev); 415 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 416 int ret; 417 418 ret = xhci_priv_resume_quirk(hcd); 419 if (ret) 420 return ret; 421 422 ret = xhci_resume(xhci, 0); 423 if (ret) 424 return ret; 425 426 pm_runtime_disable(dev); 427 pm_runtime_set_active(dev); 428 pm_runtime_enable(dev); 429 430 return 0; 431 } 432 433 static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) 434 { 435 struct usb_hcd *hcd = dev_get_drvdata(dev); 436 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 437 438 return xhci_suspend(xhci, true); 439 } 440 441 static int __maybe_unused xhci_plat_runtime_resume(struct device *dev) 442 { 443 struct usb_hcd *hcd = dev_get_drvdata(dev); 444 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 445 446 return xhci_resume(xhci, 0); 447 } 448 449 static const struct dev_pm_ops xhci_plat_pm_ops = { 450 SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) 451 452 SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, 453 xhci_plat_runtime_resume, 454 NULL) 455 }; 456 457 #ifdef CONFIG_ACPI 458 static const struct acpi_device_id usb_xhci_acpi_match[] = { 459 /* XHCI-compliant USB Controller */ 460 { "PNP0D10", }, 461 { } 462 }; 463 MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match); 464 #endif 465 466 static struct platform_driver usb_xhci_driver = { 467 .probe = xhci_plat_probe, 468 .remove = xhci_plat_remove, 469 .shutdown = usb_hcd_platform_shutdown, 470 .driver = { 471 .name = "xhci-hcd", 472 .pm = &xhci_plat_pm_ops, 473 .of_match_table = of_match_ptr(usb_xhci_of_match), 474 .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match), 475 }, 476 }; 477 MODULE_ALIAS("platform:xhci-hcd"); 478 479 static int __init xhci_plat_init(void) 480 { 481 xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides); 482 return platform_driver_register(&usb_xhci_driver); 483 } 484 module_init(xhci_plat_init); 485 486 static void __exit xhci_plat_exit(void) 487 { 488 platform_driver_unregister(&usb_xhci_driver); 489 } 490 module_exit(xhci_plat_exit); 491 492 MODULE_DESCRIPTION("xHCI Platform Host Controller Driver"); 493 MODULE_LICENSE("GPL"); 494