1 /* 2 * xhci-plat.c - xHCI host controller driver platform Bus Glue. 3 * 4 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com 5 * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> 6 * 7 * A lot of code borrowed from the Linux xHCI driver. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * version 2 as published by the Free Software Foundation. 12 */ 13 14 #include <linux/clk.h> 15 #include <linux/dma-mapping.h> 16 #include <linux/module.h> 17 #include <linux/of.h> 18 #include <linux/platform_device.h> 19 #include <linux/usb/phy.h> 20 #include <linux/slab.h> 21 #include <linux/acpi.h> 22 23 #include "xhci.h" 24 #include "xhci-plat.h" 25 #include "xhci-mvebu.h" 26 #include "xhci-rcar.h" 27 28 static struct hc_driver __read_mostly xhci_plat_hc_driver; 29 30 static int xhci_plat_setup(struct usb_hcd *hcd); 31 static int xhci_plat_start(struct usb_hcd *hcd); 32 33 static const struct xhci_driver_overrides xhci_plat_overrides __initconst = { 34 .extra_priv_size = sizeof(struct xhci_plat_priv), 35 .reset = xhci_plat_setup, 36 .start = xhci_plat_start, 37 }; 38 39 static void xhci_priv_plat_start(struct usb_hcd *hcd) 40 { 41 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); 42 43 if (priv->plat_start) 44 priv->plat_start(hcd); 45 } 46 47 static int xhci_priv_init_quirk(struct usb_hcd *hcd) 48 { 49 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); 50 51 if (!priv->init_quirk) 52 return 0; 53 54 return priv->init_quirk(hcd); 55 } 56 57 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) 58 { 59 /* 60 * As of now platform drivers don't provide MSI support so we ensure 61 * here that the generic code does not try to make a pci_dev from our 62 * dev struct in order to setup MSI 63 */ 64 xhci->quirks |= XHCI_PLAT; 65 } 66 67 /* called during probe() after chip reset completes */ 68 static int xhci_plat_setup(struct usb_hcd *hcd) 69 { 70 int ret; 71 72 73 ret = xhci_priv_init_quirk(hcd); 74 if (ret) 75 return ret; 76 77 return xhci_gen_setup(hcd, xhci_plat_quirks); 78 } 79 80 static int xhci_plat_start(struct usb_hcd *hcd) 81 { 82 xhci_priv_plat_start(hcd); 83 return xhci_run(hcd); 84 } 85 86 #ifdef CONFIG_OF 87 static const struct xhci_plat_priv xhci_plat_marvell_armada = { 88 .init_quirk = xhci_mvebu_mbus_init_quirk, 89 }; 90 91 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { 92 .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1, 93 .init_quirk = xhci_rcar_init_quirk, 94 .plat_start = xhci_rcar_start, 95 }; 96 97 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { 98 .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2, 99 .init_quirk = xhci_rcar_init_quirk, 100 .plat_start = xhci_rcar_start, 101 }; 102 103 static const struct xhci_plat_priv xhci_plat_renesas_rcar_r8a7796 = { 104 .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3, 105 .init_quirk = xhci_rcar_init_quirk, 106 .plat_start = xhci_rcar_start, 107 }; 108 109 static const struct of_device_id usb_xhci_of_match[] = { 110 { 111 .compatible = "generic-xhci", 112 }, { 113 .compatible = "xhci-platform", 114 }, { 115 .compatible = "marvell,armada-375-xhci", 116 .data = &xhci_plat_marvell_armada, 117 }, { 118 .compatible = "marvell,armada-380-xhci", 119 .data = &xhci_plat_marvell_armada, 120 }, { 121 .compatible = "renesas,xhci-r8a7790", 122 .data = &xhci_plat_renesas_rcar_gen2, 123 }, { 124 .compatible = "renesas,xhci-r8a7791", 125 .data = &xhci_plat_renesas_rcar_gen2, 126 }, { 127 .compatible = "renesas,xhci-r8a7793", 128 .data = &xhci_plat_renesas_rcar_gen2, 129 }, { 130 .compatible = "renesas,xhci-r8a7795", 131 .data = &xhci_plat_renesas_rcar_gen3, 132 }, { 133 .compatible = "renesas,xhci-r8a7796", 134 .data = &xhci_plat_renesas_rcar_r8a7796, 135 }, { 136 .compatible = "renesas,rcar-gen2-xhci", 137 .data = &xhci_plat_renesas_rcar_gen2, 138 }, { 139 .compatible = "renesas,rcar-gen3-xhci", 140 .data = &xhci_plat_renesas_rcar_gen3, 141 }, 142 {}, 143 }; 144 MODULE_DEVICE_TABLE(of, usb_xhci_of_match); 145 #endif 146 147 static int xhci_plat_probe(struct platform_device *pdev) 148 { 149 const struct of_device_id *match; 150 const struct hc_driver *driver; 151 struct xhci_hcd *xhci; 152 struct resource *res; 153 struct usb_hcd *hcd; 154 struct clk *clk; 155 int ret; 156 int irq; 157 158 if (usb_disabled()) 159 return -ENODEV; 160 161 driver = &xhci_plat_hc_driver; 162 163 irq = platform_get_irq(pdev, 0); 164 if (irq < 0) 165 return -ENODEV; 166 167 /* Try to set 64-bit DMA first */ 168 if (!pdev->dev.dma_mask) 169 /* Platform did not initialize dma_mask */ 170 ret = dma_coerce_mask_and_coherent(&pdev->dev, 171 DMA_BIT_MASK(64)); 172 else 173 ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); 174 175 /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */ 176 if (ret) { 177 ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); 178 if (ret) 179 return ret; 180 } 181 182 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); 183 if (!hcd) 184 return -ENOMEM; 185 186 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 187 hcd->regs = devm_ioremap_resource(&pdev->dev, res); 188 if (IS_ERR(hcd->regs)) { 189 ret = PTR_ERR(hcd->regs); 190 goto put_hcd; 191 } 192 193 hcd->rsrc_start = res->start; 194 hcd->rsrc_len = resource_size(res); 195 196 /* 197 * Not all platforms have a clk so it is not an error if the 198 * clock does not exists. 199 */ 200 clk = devm_clk_get(&pdev->dev, NULL); 201 if (!IS_ERR(clk)) { 202 ret = clk_prepare_enable(clk); 203 if (ret) 204 goto put_hcd; 205 } else if (PTR_ERR(clk) == -EPROBE_DEFER) { 206 ret = -EPROBE_DEFER; 207 goto put_hcd; 208 } 209 210 xhci = hcd_to_xhci(hcd); 211 match = of_match_node(usb_xhci_of_match, pdev->dev.of_node); 212 if (match) { 213 const struct xhci_plat_priv *priv_match = match->data; 214 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); 215 216 /* Just copy data for now */ 217 if (priv_match) 218 *priv = *priv_match; 219 } 220 221 device_wakeup_enable(hcd->self.controller); 222 223 xhci->clk = clk; 224 xhci->main_hcd = hcd; 225 xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev, 226 dev_name(&pdev->dev), hcd); 227 if (!xhci->shared_hcd) { 228 ret = -ENOMEM; 229 goto disable_clk; 230 } 231 232 if (device_property_read_bool(&pdev->dev, "usb3-lpm-capable")) 233 xhci->quirks |= XHCI_LPM_SUPPORT; 234 235 if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped")) 236 xhci->quirks |= XHCI_BROKEN_PORT_PED; 237 238 hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); 239 if (IS_ERR(hcd->usb_phy)) { 240 ret = PTR_ERR(hcd->usb_phy); 241 if (ret == -EPROBE_DEFER) 242 goto put_usb3_hcd; 243 hcd->usb_phy = NULL; 244 } else { 245 ret = usb_phy_init(hcd->usb_phy); 246 if (ret) 247 goto put_usb3_hcd; 248 } 249 250 ret = usb_add_hcd(hcd, irq, IRQF_SHARED); 251 if (ret) 252 goto disable_usb_phy; 253 254 if (HCC_MAX_PSA(xhci->hcc_params) >= 4) 255 xhci->shared_hcd->can_do_streams = 1; 256 257 ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); 258 if (ret) 259 goto dealloc_usb2_hcd; 260 261 return 0; 262 263 264 dealloc_usb2_hcd: 265 usb_remove_hcd(hcd); 266 267 disable_usb_phy: 268 usb_phy_shutdown(hcd->usb_phy); 269 270 put_usb3_hcd: 271 usb_put_hcd(xhci->shared_hcd); 272 273 disable_clk: 274 if (!IS_ERR(clk)) 275 clk_disable_unprepare(clk); 276 277 put_hcd: 278 usb_put_hcd(hcd); 279 280 return ret; 281 } 282 283 static int xhci_plat_remove(struct platform_device *dev) 284 { 285 struct usb_hcd *hcd = platform_get_drvdata(dev); 286 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 287 struct clk *clk = xhci->clk; 288 289 xhci->xhc_state |= XHCI_STATE_REMOVING; 290 291 usb_remove_hcd(xhci->shared_hcd); 292 usb_phy_shutdown(hcd->usb_phy); 293 294 usb_remove_hcd(hcd); 295 usb_put_hcd(xhci->shared_hcd); 296 297 if (!IS_ERR(clk)) 298 clk_disable_unprepare(clk); 299 usb_put_hcd(hcd); 300 301 return 0; 302 } 303 304 #ifdef CONFIG_PM_SLEEP 305 static int xhci_plat_suspend(struct device *dev) 306 { 307 struct usb_hcd *hcd = dev_get_drvdata(dev); 308 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 309 310 /* 311 * xhci_suspend() needs `do_wakeup` to know whether host is allowed 312 * to do wakeup during suspend. Since xhci_plat_suspend is currently 313 * only designed for system suspend, device_may_wakeup() is enough 314 * to dertermine whether host is allowed to do wakeup. Need to 315 * reconsider this when xhci_plat_suspend enlarges its scope, e.g., 316 * also applies to runtime suspend. 317 */ 318 return xhci_suspend(xhci, device_may_wakeup(dev)); 319 } 320 321 static int xhci_plat_resume(struct device *dev) 322 { 323 struct usb_hcd *hcd = dev_get_drvdata(dev); 324 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 325 326 return xhci_resume(xhci, 0); 327 } 328 329 static const struct dev_pm_ops xhci_plat_pm_ops = { 330 SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) 331 }; 332 #define DEV_PM_OPS (&xhci_plat_pm_ops) 333 #else 334 #define DEV_PM_OPS NULL 335 #endif /* CONFIG_PM */ 336 337 static const struct acpi_device_id usb_xhci_acpi_match[] = { 338 /* XHCI-compliant USB Controller */ 339 { "PNP0D10", }, 340 { } 341 }; 342 MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match); 343 344 static struct platform_driver usb_xhci_driver = { 345 .probe = xhci_plat_probe, 346 .remove = xhci_plat_remove, 347 .driver = { 348 .name = "xhci-hcd", 349 .pm = DEV_PM_OPS, 350 .of_match_table = of_match_ptr(usb_xhci_of_match), 351 .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match), 352 }, 353 }; 354 MODULE_ALIAS("platform:xhci-hcd"); 355 356 static int __init xhci_plat_init(void) 357 { 358 xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides); 359 return platform_driver_register(&usb_xhci_driver); 360 } 361 module_init(xhci_plat_init); 362 363 static void __exit xhci_plat_exit(void) 364 { 365 platform_driver_unregister(&usb_xhci_driver); 366 } 367 module_exit(xhci_plat_exit); 368 369 MODULE_DESCRIPTION("xHCI Platform Host Controller Driver"); 370 MODULE_LICENSE("GPL"); 371