xref: /openbmc/linux/drivers/usb/host/xhci-plat.c (revision 4cff79e9)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * xhci-plat.c - xHCI host controller driver platform Bus Glue.
4  *
5  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
6  * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
7  *
8  * A lot of code borrowed from the Linux xHCI driver.
9  */
10 
11 #include <linux/clk.h>
12 #include <linux/dma-mapping.h>
13 #include <linux/module.h>
14 #include <linux/pci.h>
15 #include <linux/of.h>
16 #include <linux/of_device.h>
17 #include <linux/platform_device.h>
18 #include <linux/usb/phy.h>
19 #include <linux/slab.h>
20 #include <linux/acpi.h>
21 
22 #include "xhci.h"
23 #include "xhci-plat.h"
24 #include "xhci-mvebu.h"
25 #include "xhci-rcar.h"
26 
27 static struct hc_driver __read_mostly xhci_plat_hc_driver;
28 
29 static int xhci_plat_setup(struct usb_hcd *hcd);
30 static int xhci_plat_start(struct usb_hcd *hcd);
31 
32 static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
33 	.extra_priv_size = sizeof(struct xhci_plat_priv),
34 	.reset = xhci_plat_setup,
35 	.start = xhci_plat_start,
36 };
37 
38 static void xhci_priv_plat_start(struct usb_hcd *hcd)
39 {
40 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
41 
42 	if (priv->plat_start)
43 		priv->plat_start(hcd);
44 }
45 
46 static int xhci_priv_init_quirk(struct usb_hcd *hcd)
47 {
48 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
49 
50 	if (!priv->init_quirk)
51 		return 0;
52 
53 	return priv->init_quirk(hcd);
54 }
55 
56 static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
57 {
58 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
59 
60 	if (!priv->resume_quirk)
61 		return 0;
62 
63 	return priv->resume_quirk(hcd);
64 }
65 
66 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
67 {
68 	/*
69 	 * As of now platform drivers don't provide MSI support so we ensure
70 	 * here that the generic code does not try to make a pci_dev from our
71 	 * dev struct in order to setup MSI
72 	 */
73 	xhci->quirks |= XHCI_PLAT;
74 }
75 
76 /* called during probe() after chip reset completes */
77 static int xhci_plat_setup(struct usb_hcd *hcd)
78 {
79 	int ret;
80 
81 
82 	ret = xhci_priv_init_quirk(hcd);
83 	if (ret)
84 		return ret;
85 
86 	return xhci_gen_setup(hcd, xhci_plat_quirks);
87 }
88 
89 static int xhci_plat_start(struct usb_hcd *hcd)
90 {
91 	xhci_priv_plat_start(hcd);
92 	return xhci_run(hcd);
93 }
94 
95 #ifdef CONFIG_OF
96 static const struct xhci_plat_priv xhci_plat_marvell_armada = {
97 	.init_quirk = xhci_mvebu_mbus_init_quirk,
98 };
99 
100 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
101 	.firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1,
102 	.init_quirk = xhci_rcar_init_quirk,
103 	.plat_start = xhci_rcar_start,
104 	.resume_quirk = xhci_rcar_resume_quirk,
105 };
106 
107 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
108 	.init_quirk = xhci_rcar_init_quirk,
109 	.plat_start = xhci_rcar_start,
110 	.resume_quirk = xhci_rcar_resume_quirk,
111 };
112 
113 static const struct of_device_id usb_xhci_of_match[] = {
114 	{
115 		.compatible = "generic-xhci",
116 	}, {
117 		.compatible = "xhci-platform",
118 	}, {
119 		.compatible = "marvell,armada-375-xhci",
120 		.data = &xhci_plat_marvell_armada,
121 	}, {
122 		.compatible = "marvell,armada-380-xhci",
123 		.data = &xhci_plat_marvell_armada,
124 	}, {
125 		.compatible = "renesas,xhci-r8a7790",
126 		.data = &xhci_plat_renesas_rcar_gen2,
127 	}, {
128 		.compatible = "renesas,xhci-r8a7791",
129 		.data = &xhci_plat_renesas_rcar_gen2,
130 	}, {
131 		.compatible = "renesas,xhci-r8a7793",
132 		.data = &xhci_plat_renesas_rcar_gen2,
133 	}, {
134 		.compatible = "renesas,xhci-r8a7795",
135 		.data = &xhci_plat_renesas_rcar_gen3,
136 	}, {
137 		.compatible = "renesas,xhci-r8a7796",
138 		.data = &xhci_plat_renesas_rcar_gen3,
139 	}, {
140 		.compatible = "renesas,rcar-gen2-xhci",
141 		.data = &xhci_plat_renesas_rcar_gen2,
142 	}, {
143 		.compatible = "renesas,rcar-gen3-xhci",
144 		.data = &xhci_plat_renesas_rcar_gen3,
145 	},
146 	{},
147 };
148 MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
149 #endif
150 
151 static int xhci_plat_probe(struct platform_device *pdev)
152 {
153 	const struct xhci_plat_priv *priv_match;
154 	const struct hc_driver	*driver;
155 	struct device		*sysdev;
156 	struct xhci_hcd		*xhci;
157 	struct resource         *res;
158 	struct usb_hcd		*hcd;
159 	struct clk              *clk;
160 	struct clk              *reg_clk;
161 	int			ret;
162 	int			irq;
163 
164 	if (usb_disabled())
165 		return -ENODEV;
166 
167 	driver = &xhci_plat_hc_driver;
168 
169 	irq = platform_get_irq(pdev, 0);
170 	if (irq < 0)
171 		return irq;
172 
173 	/*
174 	 * sysdev must point to a device that is known to the system firmware
175 	 * or PCI hardware. We handle these three cases here:
176 	 * 1. xhci_plat comes from firmware
177 	 * 2. xhci_plat is child of a device from firmware (dwc3-plat)
178 	 * 3. xhci_plat is grandchild of a pci device (dwc3-pci)
179 	 */
180 	for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) {
181 		if (is_of_node(sysdev->fwnode) ||
182 			is_acpi_device_node(sysdev->fwnode))
183 			break;
184 #ifdef CONFIG_PCI
185 		else if (sysdev->bus == &pci_bus_type)
186 			break;
187 #endif
188 	}
189 
190 	if (!sysdev)
191 		sysdev = &pdev->dev;
192 
193 	/* Try to set 64-bit DMA first */
194 	if (WARN_ON(!sysdev->dma_mask))
195 		/* Platform did not initialize dma_mask */
196 		ret = dma_coerce_mask_and_coherent(sysdev,
197 						   DMA_BIT_MASK(64));
198 	else
199 		ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
200 
201 	/* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */
202 	if (ret) {
203 		ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32));
204 		if (ret)
205 			return ret;
206 	}
207 
208 	pm_runtime_set_active(&pdev->dev);
209 	pm_runtime_enable(&pdev->dev);
210 	pm_runtime_get_noresume(&pdev->dev);
211 
212 	hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
213 			       dev_name(&pdev->dev), NULL);
214 	if (!hcd) {
215 		ret = -ENOMEM;
216 		goto disable_runtime;
217 	}
218 
219 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
220 	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
221 	if (IS_ERR(hcd->regs)) {
222 		ret = PTR_ERR(hcd->regs);
223 		goto put_hcd;
224 	}
225 
226 	hcd->rsrc_start = res->start;
227 	hcd->rsrc_len = resource_size(res);
228 
229 	/*
230 	 * Not all platforms have clks so it is not an error if the
231 	 * clock do not exist.
232 	 */
233 	reg_clk = devm_clk_get(&pdev->dev, "reg");
234 	if (!IS_ERR(reg_clk)) {
235 		ret = clk_prepare_enable(reg_clk);
236 		if (ret)
237 			goto put_hcd;
238 	} else if (PTR_ERR(reg_clk) == -EPROBE_DEFER) {
239 		ret = -EPROBE_DEFER;
240 		goto put_hcd;
241 	}
242 
243 	clk = devm_clk_get(&pdev->dev, NULL);
244 	if (!IS_ERR(clk)) {
245 		ret = clk_prepare_enable(clk);
246 		if (ret)
247 			goto disable_reg_clk;
248 	} else if (PTR_ERR(clk) == -EPROBE_DEFER) {
249 		ret = -EPROBE_DEFER;
250 		goto disable_reg_clk;
251 	}
252 
253 	xhci = hcd_to_xhci(hcd);
254 	priv_match = of_device_get_match_data(&pdev->dev);
255 	if (priv_match) {
256 		struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
257 
258 		/* Just copy data for now */
259 		if (priv_match)
260 			*priv = *priv_match;
261 	}
262 
263 	device_wakeup_enable(hcd->self.controller);
264 
265 	xhci->clk = clk;
266 	xhci->reg_clk = reg_clk;
267 	xhci->main_hcd = hcd;
268 	xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
269 			dev_name(&pdev->dev), hcd);
270 	if (!xhci->shared_hcd) {
271 		ret = -ENOMEM;
272 		goto disable_clk;
273 	}
274 
275 	if (device_property_read_bool(sysdev, "usb2-lpm-disable"))
276 		xhci->quirks |= XHCI_HW_LPM_DISABLE;
277 
278 	if (device_property_read_bool(sysdev, "usb3-lpm-capable"))
279 		xhci->quirks |= XHCI_LPM_SUPPORT;
280 
281 	if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped"))
282 		xhci->quirks |= XHCI_BROKEN_PORT_PED;
283 
284 	/* imod_interval is the interrupt moderation value in nanoseconds. */
285 	xhci->imod_interval = 40000;
286 	device_property_read_u32(sysdev, "imod-interval-ns",
287 				 &xhci->imod_interval);
288 
289 	hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
290 	if (IS_ERR(hcd->usb_phy)) {
291 		ret = PTR_ERR(hcd->usb_phy);
292 		if (ret == -EPROBE_DEFER)
293 			goto put_usb3_hcd;
294 		hcd->usb_phy = NULL;
295 	} else {
296 		ret = usb_phy_init(hcd->usb_phy);
297 		if (ret)
298 			goto put_usb3_hcd;
299 		hcd->skip_phy_initialization = 1;
300 	}
301 
302 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
303 	if (ret)
304 		goto disable_usb_phy;
305 
306 	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
307 		xhci->shared_hcd->can_do_streams = 1;
308 
309 	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
310 	if (ret)
311 		goto dealloc_usb2_hcd;
312 
313 	device_enable_async_suspend(&pdev->dev);
314 	pm_runtime_put_noidle(&pdev->dev);
315 
316 	/*
317 	 * Prevent runtime pm from being on as default, users should enable
318 	 * runtime pm using power/control in sysfs.
319 	 */
320 	pm_runtime_forbid(&pdev->dev);
321 
322 	return 0;
323 
324 
325 dealloc_usb2_hcd:
326 	usb_remove_hcd(hcd);
327 
328 disable_usb_phy:
329 	usb_phy_shutdown(hcd->usb_phy);
330 
331 put_usb3_hcd:
332 	usb_put_hcd(xhci->shared_hcd);
333 
334 disable_clk:
335 	clk_disable_unprepare(clk);
336 
337 disable_reg_clk:
338 	clk_disable_unprepare(reg_clk);
339 
340 put_hcd:
341 	usb_put_hcd(hcd);
342 
343 disable_runtime:
344 	pm_runtime_put_noidle(&pdev->dev);
345 	pm_runtime_disable(&pdev->dev);
346 
347 	return ret;
348 }
349 
350 static int xhci_plat_remove(struct platform_device *dev)
351 {
352 	struct usb_hcd	*hcd = platform_get_drvdata(dev);
353 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
354 	struct clk *clk = xhci->clk;
355 	struct clk *reg_clk = xhci->reg_clk;
356 
357 	xhci->xhc_state |= XHCI_STATE_REMOVING;
358 
359 	usb_remove_hcd(xhci->shared_hcd);
360 	usb_phy_shutdown(hcd->usb_phy);
361 
362 	usb_remove_hcd(hcd);
363 	usb_put_hcd(xhci->shared_hcd);
364 
365 	clk_disable_unprepare(clk);
366 	clk_disable_unprepare(reg_clk);
367 	usb_put_hcd(hcd);
368 
369 	pm_runtime_set_suspended(&dev->dev);
370 	pm_runtime_disable(&dev->dev);
371 
372 	return 0;
373 }
374 
375 static int __maybe_unused xhci_plat_suspend(struct device *dev)
376 {
377 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
378 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
379 
380 	/*
381 	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
382 	 * to do wakeup during suspend. Since xhci_plat_suspend is currently
383 	 * only designed for system suspend, device_may_wakeup() is enough
384 	 * to dertermine whether host is allowed to do wakeup. Need to
385 	 * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
386 	 * also applies to runtime suspend.
387 	 */
388 	return xhci_suspend(xhci, device_may_wakeup(dev));
389 }
390 
391 static int __maybe_unused xhci_plat_resume(struct device *dev)
392 {
393 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
394 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
395 	int ret;
396 
397 	ret = xhci_priv_resume_quirk(hcd);
398 	if (ret)
399 		return ret;
400 
401 	return xhci_resume(xhci, 0);
402 }
403 
404 static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
405 {
406 	struct usb_hcd  *hcd = dev_get_drvdata(dev);
407 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
408 
409 	return xhci_suspend(xhci, true);
410 }
411 
412 static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
413 {
414 	struct usb_hcd  *hcd = dev_get_drvdata(dev);
415 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
416 
417 	return xhci_resume(xhci, 0);
418 }
419 
420 static const struct dev_pm_ops xhci_plat_pm_ops = {
421 	SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
422 
423 	SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
424 			   xhci_plat_runtime_resume,
425 			   NULL)
426 };
427 
428 static const struct acpi_device_id usb_xhci_acpi_match[] = {
429 	/* XHCI-compliant USB Controller */
430 	{ "PNP0D10", },
431 	{ }
432 };
433 MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
434 
435 static struct platform_driver usb_xhci_driver = {
436 	.probe	= xhci_plat_probe,
437 	.remove	= xhci_plat_remove,
438 	.driver	= {
439 		.name = "xhci-hcd",
440 		.pm = &xhci_plat_pm_ops,
441 		.of_match_table = of_match_ptr(usb_xhci_of_match),
442 		.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
443 	},
444 };
445 MODULE_ALIAS("platform:xhci-hcd");
446 
447 static int __init xhci_plat_init(void)
448 {
449 	xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
450 	return platform_driver_register(&usb_xhci_driver);
451 }
452 module_init(xhci_plat_init);
453 
454 static void __exit xhci_plat_exit(void)
455 {
456 	platform_driver_unregister(&usb_xhci_driver);
457 }
458 module_exit(xhci_plat_exit);
459 
460 MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
461 MODULE_LICENSE("GPL");
462