xref: /openbmc/linux/drivers/usb/host/xhci-plat.c (revision 2209fda3)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * xhci-plat.c - xHCI host controller driver platform Bus Glue.
4  *
5  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
6  * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
7  *
8  * A lot of code borrowed from the Linux xHCI driver.
9  */
10 
11 #include <linux/clk.h>
12 #include <linux/dma-mapping.h>
13 #include <linux/module.h>
14 #include <linux/pci.h>
15 #include <linux/of.h>
16 #include <linux/of_device.h>
17 #include <linux/platform_device.h>
18 #include <linux/usb/phy.h>
19 #include <linux/slab.h>
20 #include <linux/acpi.h>
21 #include <linux/usb/of.h>
22 
23 #include "xhci.h"
24 #include "xhci-plat.h"
25 #include "xhci-mvebu.h"
26 #include "xhci-rcar.h"
27 
28 static struct hc_driver __read_mostly xhci_plat_hc_driver;
29 
30 static int xhci_plat_setup(struct usb_hcd *hcd);
31 static int xhci_plat_start(struct usb_hcd *hcd);
32 
33 static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
34 	.extra_priv_size = sizeof(struct xhci_plat_priv),
35 	.reset = xhci_plat_setup,
36 	.start = xhci_plat_start,
37 };
38 
39 static void xhci_priv_plat_start(struct usb_hcd *hcd)
40 {
41 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
42 
43 	if (priv->plat_start)
44 		priv->plat_start(hcd);
45 }
46 
47 static int xhci_priv_init_quirk(struct usb_hcd *hcd)
48 {
49 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
50 
51 	if (!priv->init_quirk)
52 		return 0;
53 
54 	return priv->init_quirk(hcd);
55 }
56 
57 static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
58 {
59 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
60 
61 	if (!priv->resume_quirk)
62 		return 0;
63 
64 	return priv->resume_quirk(hcd);
65 }
66 
67 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
68 {
69 	/*
70 	 * As of now platform drivers don't provide MSI support so we ensure
71 	 * here that the generic code does not try to make a pci_dev from our
72 	 * dev struct in order to setup MSI
73 	 */
74 	xhci->quirks |= XHCI_PLAT;
75 }
76 
77 /* called during probe() after chip reset completes */
78 static int xhci_plat_setup(struct usb_hcd *hcd)
79 {
80 	int ret;
81 
82 
83 	ret = xhci_priv_init_quirk(hcd);
84 	if (ret)
85 		return ret;
86 
87 	return xhci_gen_setup(hcd, xhci_plat_quirks);
88 }
89 
90 static int xhci_plat_start(struct usb_hcd *hcd)
91 {
92 	xhci_priv_plat_start(hcd);
93 	return xhci_run(hcd);
94 }
95 
96 #ifdef CONFIG_OF
97 static const struct xhci_plat_priv xhci_plat_marvell_armada = {
98 	.init_quirk = xhci_mvebu_mbus_init_quirk,
99 };
100 
101 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
102 	.firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1,
103 	.init_quirk = xhci_rcar_init_quirk,
104 	.plat_start = xhci_rcar_start,
105 	.resume_quirk = xhci_rcar_resume_quirk,
106 };
107 
108 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
109 	.firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3,
110 	.init_quirk = xhci_rcar_init_quirk,
111 	.plat_start = xhci_rcar_start,
112 	.resume_quirk = xhci_rcar_resume_quirk,
113 };
114 
115 static const struct of_device_id usb_xhci_of_match[] = {
116 	{
117 		.compatible = "generic-xhci",
118 	}, {
119 		.compatible = "xhci-platform",
120 	}, {
121 		.compatible = "marvell,armada-375-xhci",
122 		.data = &xhci_plat_marvell_armada,
123 	}, {
124 		.compatible = "marvell,armada-380-xhci",
125 		.data = &xhci_plat_marvell_armada,
126 	}, {
127 		.compatible = "renesas,xhci-r8a7790",
128 		.data = &xhci_plat_renesas_rcar_gen2,
129 	}, {
130 		.compatible = "renesas,xhci-r8a7791",
131 		.data = &xhci_plat_renesas_rcar_gen2,
132 	}, {
133 		.compatible = "renesas,xhci-r8a7793",
134 		.data = &xhci_plat_renesas_rcar_gen2,
135 	}, {
136 		.compatible = "renesas,xhci-r8a7795",
137 		.data = &xhci_plat_renesas_rcar_gen3,
138 	}, {
139 		.compatible = "renesas,xhci-r8a7796",
140 		.data = &xhci_plat_renesas_rcar_gen3,
141 	}, {
142 		.compatible = "renesas,rcar-gen2-xhci",
143 		.data = &xhci_plat_renesas_rcar_gen2,
144 	}, {
145 		.compatible = "renesas,rcar-gen3-xhci",
146 		.data = &xhci_plat_renesas_rcar_gen3,
147 	},
148 	{},
149 };
150 MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
151 #endif
152 
153 static int xhci_plat_probe(struct platform_device *pdev)
154 {
155 	const struct xhci_plat_priv *priv_match;
156 	const struct hc_driver	*driver;
157 	struct device		*sysdev, *tmpdev;
158 	struct xhci_hcd		*xhci;
159 	struct resource         *res;
160 	struct usb_hcd		*hcd;
161 	struct clk              *clk;
162 	struct clk              *reg_clk;
163 	int			ret;
164 	int			irq;
165 
166 	if (usb_disabled())
167 		return -ENODEV;
168 
169 	driver = &xhci_plat_hc_driver;
170 
171 	irq = platform_get_irq(pdev, 0);
172 	if (irq < 0)
173 		return irq;
174 
175 	/*
176 	 * sysdev must point to a device that is known to the system firmware
177 	 * or PCI hardware. We handle these three cases here:
178 	 * 1. xhci_plat comes from firmware
179 	 * 2. xhci_plat is child of a device from firmware (dwc3-plat)
180 	 * 3. xhci_plat is grandchild of a pci device (dwc3-pci)
181 	 */
182 	for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) {
183 		if (is_of_node(sysdev->fwnode) ||
184 			is_acpi_device_node(sysdev->fwnode))
185 			break;
186 #ifdef CONFIG_PCI
187 		else if (sysdev->bus == &pci_bus_type)
188 			break;
189 #endif
190 	}
191 
192 	if (!sysdev)
193 		sysdev = &pdev->dev;
194 
195 	/* Try to set 64-bit DMA first */
196 	if (WARN_ON(!sysdev->dma_mask))
197 		/* Platform did not initialize dma_mask */
198 		ret = dma_coerce_mask_and_coherent(sysdev,
199 						   DMA_BIT_MASK(64));
200 	else
201 		ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
202 
203 	/* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */
204 	if (ret) {
205 		ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32));
206 		if (ret)
207 			return ret;
208 	}
209 
210 	pm_runtime_set_active(&pdev->dev);
211 	pm_runtime_enable(&pdev->dev);
212 	pm_runtime_get_noresume(&pdev->dev);
213 
214 	hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
215 			       dev_name(&pdev->dev), NULL);
216 	if (!hcd) {
217 		ret = -ENOMEM;
218 		goto disable_runtime;
219 	}
220 
221 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
222 	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
223 	if (IS_ERR(hcd->regs)) {
224 		ret = PTR_ERR(hcd->regs);
225 		goto put_hcd;
226 	}
227 
228 	hcd->rsrc_start = res->start;
229 	hcd->rsrc_len = resource_size(res);
230 
231 	/*
232 	 * Not all platforms have clks so it is not an error if the
233 	 * clock do not exist.
234 	 */
235 	reg_clk = devm_clk_get(&pdev->dev, "reg");
236 	if (!IS_ERR(reg_clk)) {
237 		ret = clk_prepare_enable(reg_clk);
238 		if (ret)
239 			goto put_hcd;
240 	} else if (PTR_ERR(reg_clk) == -EPROBE_DEFER) {
241 		ret = -EPROBE_DEFER;
242 		goto put_hcd;
243 	}
244 
245 	clk = devm_clk_get(&pdev->dev, NULL);
246 	if (!IS_ERR(clk)) {
247 		ret = clk_prepare_enable(clk);
248 		if (ret)
249 			goto disable_reg_clk;
250 	} else if (PTR_ERR(clk) == -EPROBE_DEFER) {
251 		ret = -EPROBE_DEFER;
252 		goto disable_reg_clk;
253 	}
254 
255 	xhci = hcd_to_xhci(hcd);
256 	priv_match = of_device_get_match_data(&pdev->dev);
257 	if (priv_match) {
258 		struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
259 
260 		/* Just copy data for now */
261 		if (priv_match)
262 			*priv = *priv_match;
263 	}
264 
265 	device_wakeup_enable(hcd->self.controller);
266 
267 	xhci->clk = clk;
268 	xhci->reg_clk = reg_clk;
269 	xhci->main_hcd = hcd;
270 	xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
271 			dev_name(&pdev->dev), hcd);
272 	if (!xhci->shared_hcd) {
273 		ret = -ENOMEM;
274 		goto disable_clk;
275 	}
276 
277 	/* imod_interval is the interrupt moderation value in nanoseconds. */
278 	xhci->imod_interval = 40000;
279 
280 	/* Iterate over all parent nodes for finding quirks */
281 	for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {
282 
283 		if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
284 			xhci->quirks |= XHCI_HW_LPM_DISABLE;
285 
286 		if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
287 			xhci->quirks |= XHCI_LPM_SUPPORT;
288 
289 		if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
290 			xhci->quirks |= XHCI_BROKEN_PORT_PED;
291 
292 		device_property_read_u32(tmpdev, "imod-interval-ns",
293 					 &xhci->imod_interval);
294 	}
295 
296 	hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
297 	if (IS_ERR(hcd->usb_phy)) {
298 		ret = PTR_ERR(hcd->usb_phy);
299 		if (ret == -EPROBE_DEFER)
300 			goto put_usb3_hcd;
301 		hcd->usb_phy = NULL;
302 	} else {
303 		ret = usb_phy_init(hcd->usb_phy);
304 		if (ret)
305 			goto put_usb3_hcd;
306 		hcd->skip_phy_initialization = 1;
307 	}
308 
309 	hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
310 	xhci->shared_hcd->tpl_support = hcd->tpl_support;
311 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
312 	if (ret)
313 		goto disable_usb_phy;
314 
315 	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
316 		xhci->shared_hcd->can_do_streams = 1;
317 
318 	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
319 	if (ret)
320 		goto dealloc_usb2_hcd;
321 
322 	device_enable_async_suspend(&pdev->dev);
323 	pm_runtime_put_noidle(&pdev->dev);
324 
325 	/*
326 	 * Prevent runtime pm from being on as default, users should enable
327 	 * runtime pm using power/control in sysfs.
328 	 */
329 	pm_runtime_forbid(&pdev->dev);
330 
331 	return 0;
332 
333 
334 dealloc_usb2_hcd:
335 	usb_remove_hcd(hcd);
336 
337 disable_usb_phy:
338 	usb_phy_shutdown(hcd->usb_phy);
339 
340 put_usb3_hcd:
341 	usb_put_hcd(xhci->shared_hcd);
342 
343 disable_clk:
344 	clk_disable_unprepare(clk);
345 
346 disable_reg_clk:
347 	clk_disable_unprepare(reg_clk);
348 
349 put_hcd:
350 	usb_put_hcd(hcd);
351 
352 disable_runtime:
353 	pm_runtime_put_noidle(&pdev->dev);
354 	pm_runtime_disable(&pdev->dev);
355 
356 	return ret;
357 }
358 
359 static int xhci_plat_remove(struct platform_device *dev)
360 {
361 	struct usb_hcd	*hcd = platform_get_drvdata(dev);
362 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
363 	struct clk *clk = xhci->clk;
364 	struct clk *reg_clk = xhci->reg_clk;
365 
366 	xhci->xhc_state |= XHCI_STATE_REMOVING;
367 
368 	usb_remove_hcd(xhci->shared_hcd);
369 	usb_phy_shutdown(hcd->usb_phy);
370 
371 	usb_remove_hcd(hcd);
372 	usb_put_hcd(xhci->shared_hcd);
373 
374 	clk_disable_unprepare(clk);
375 	clk_disable_unprepare(reg_clk);
376 	usb_put_hcd(hcd);
377 
378 	pm_runtime_set_suspended(&dev->dev);
379 	pm_runtime_disable(&dev->dev);
380 
381 	return 0;
382 }
383 
384 static int __maybe_unused xhci_plat_suspend(struct device *dev)
385 {
386 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
387 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
388 
389 	/*
390 	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
391 	 * to do wakeup during suspend. Since xhci_plat_suspend is currently
392 	 * only designed for system suspend, device_may_wakeup() is enough
393 	 * to dertermine whether host is allowed to do wakeup. Need to
394 	 * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
395 	 * also applies to runtime suspend.
396 	 */
397 	return xhci_suspend(xhci, device_may_wakeup(dev));
398 }
399 
400 static int __maybe_unused xhci_plat_resume(struct device *dev)
401 {
402 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
403 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
404 	int ret;
405 
406 	ret = xhci_priv_resume_quirk(hcd);
407 	if (ret)
408 		return ret;
409 
410 	return xhci_resume(xhci, 0);
411 }
412 
413 static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
414 {
415 	struct usb_hcd  *hcd = dev_get_drvdata(dev);
416 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
417 
418 	return xhci_suspend(xhci, true);
419 }
420 
421 static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
422 {
423 	struct usb_hcd  *hcd = dev_get_drvdata(dev);
424 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
425 
426 	return xhci_resume(xhci, 0);
427 }
428 
429 static const struct dev_pm_ops xhci_plat_pm_ops = {
430 	SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
431 
432 	SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
433 			   xhci_plat_runtime_resume,
434 			   NULL)
435 };
436 
437 static const struct acpi_device_id usb_xhci_acpi_match[] = {
438 	/* XHCI-compliant USB Controller */
439 	{ "PNP0D10", },
440 	{ }
441 };
442 MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
443 
444 static struct platform_driver usb_xhci_driver = {
445 	.probe	= xhci_plat_probe,
446 	.remove	= xhci_plat_remove,
447 	.driver	= {
448 		.name = "xhci-hcd",
449 		.pm = &xhci_plat_pm_ops,
450 		.of_match_table = of_match_ptr(usb_xhci_of_match),
451 		.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
452 	},
453 };
454 MODULE_ALIAS("platform:xhci-hcd");
455 
456 static int __init xhci_plat_init(void)
457 {
458 	xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
459 	return platform_driver_register(&usb_xhci_driver);
460 }
461 module_init(xhci_plat_init);
462 
463 static void __exit xhci_plat_exit(void)
464 {
465 	platform_driver_unregister(&usb_xhci_driver);
466 }
467 module_exit(xhci_plat_exit);
468 
469 MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
470 MODULE_LICENSE("GPL");
471