1 /* 2 * xHCI host controller driver PCI Bus Glue. 3 * 4 * Copyright (C) 2008 Intel Corp. 5 * 6 * Author: Sarah Sharp 7 * Some code borrowed from the Linux EHCI driver. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 16 * for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software Foundation, 20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 */ 22 23 #include <linux/pci.h> 24 #include <linux/slab.h> 25 #include <linux/module.h> 26 27 #include "xhci.h" 28 #include "xhci-trace.h" 29 30 /* Device for a quirk */ 31 #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 32 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 33 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 34 35 #define PCI_VENDOR_ID_ETRON 0x1b6f 36 #define PCI_DEVICE_ID_ASROCK_P67 0x7023 37 38 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 39 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 40 41 static const char hcd_name[] = "xhci_hcd"; 42 43 /* called after powerup, by probe or system-pm "wakeup" */ 44 static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) 45 { 46 /* 47 * TODO: Implement finding debug ports later. 48 * TODO: see if there are any quirks that need to be added to handle 49 * new extended capabilities. 50 */ 51 52 /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ 53 if (!pci_set_mwi(pdev)) 54 xhci_dbg(xhci, "MWI active\n"); 55 56 xhci_dbg(xhci, "Finished xhci_pci_reinit\n"); 57 return 0; 58 } 59 60 static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) 61 { 62 struct pci_dev *pdev = to_pci_dev(dev); 63 64 /* Look for vendor-specific quirks */ 65 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && 66 (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK || 67 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) { 68 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && 69 pdev->revision == 0x0) { 70 xhci->quirks |= XHCI_RESET_EP_QUIRK; 71 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 72 "QUIRK: Fresco Logic xHC needs configure" 73 " endpoint cmd after reset endpoint"); 74 } 75 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && 76 pdev->revision == 0x4) { 77 xhci->quirks |= XHCI_SLOW_SUSPEND; 78 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 79 "QUIRK: Fresco Logic xHC revision %u" 80 "must be suspended extra slowly", 81 pdev->revision); 82 } 83 /* Fresco Logic confirms: all revisions of this chip do not 84 * support MSI, even though some of them claim to in their PCI 85 * capabilities. 86 */ 87 xhci->quirks |= XHCI_BROKEN_MSI; 88 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 89 "QUIRK: Fresco Logic revision %u " 90 "has broken MSI implementation", 91 pdev->revision); 92 xhci->quirks |= XHCI_TRUST_TX_LENGTH; 93 } 94 95 if (pdev->vendor == PCI_VENDOR_ID_NEC) 96 xhci->quirks |= XHCI_NEC_HOST; 97 98 if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) 99 xhci->quirks |= XHCI_AMD_0x96_HOST; 100 101 /* AMD PLL quirk */ 102 if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) 103 xhci->quirks |= XHCI_AMD_PLL_FIX; 104 if (pdev->vendor == PCI_VENDOR_ID_INTEL) { 105 xhci->quirks |= XHCI_LPM_SUPPORT; 106 xhci->quirks |= XHCI_INTEL_HOST; 107 } 108 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 109 pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { 110 xhci->quirks |= XHCI_EP_LIMIT_QUIRK; 111 xhci->limit_active_eps = 64; 112 xhci->quirks |= XHCI_SW_BW_CHECKING; 113 /* 114 * PPT desktop boards DH77EB and DH77DF will power back on after 115 * a few seconds of being shutdown. The fix for this is to 116 * switch the ports from xHCI to EHCI on shutdown. We can't use 117 * DMI information to find those particular boards (since each 118 * vendor will change the board name), so we have to key off all 119 * PPT chipsets. 120 */ 121 xhci->quirks |= XHCI_SPURIOUS_REBOOT; 122 xhci->quirks |= XHCI_AVOID_BEI; 123 } 124 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 125 (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI || 126 pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI)) { 127 /* Workaround for occasional spurious wakeups from S5 (or 128 * any other sleep) on Haswell machines with LPT and LPT-LP 129 * with the new Intel BIOS 130 */ 131 xhci->quirks |= XHCI_SPURIOUS_WAKEUP; 132 } 133 if (pdev->vendor == PCI_VENDOR_ID_ETRON && 134 pdev->device == PCI_DEVICE_ID_ASROCK_P67) { 135 xhci->quirks |= XHCI_RESET_ON_RESUME; 136 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 137 "QUIRK: Resetting on resume"); 138 xhci->quirks |= XHCI_TRUST_TX_LENGTH; 139 } 140 if (pdev->vendor == PCI_VENDOR_ID_VIA) 141 xhci->quirks |= XHCI_RESET_ON_RESUME; 142 } 143 144 /* called during probe() after chip reset completes */ 145 static int xhci_pci_setup(struct usb_hcd *hcd) 146 { 147 struct xhci_hcd *xhci; 148 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 149 int retval; 150 151 retval = xhci_gen_setup(hcd, xhci_pci_quirks); 152 if (retval) 153 return retval; 154 155 xhci = hcd_to_xhci(hcd); 156 if (!usb_hcd_is_primary_hcd(hcd)) 157 return 0; 158 159 pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); 160 xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); 161 162 /* Find any debug ports */ 163 retval = xhci_pci_reinit(xhci, pdev); 164 if (!retval) 165 return retval; 166 167 kfree(xhci); 168 return retval; 169 } 170 171 /* 172 * We need to register our own PCI probe function (instead of the USB core's 173 * function) in order to create a second roothub under xHCI. 174 */ 175 static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) 176 { 177 int retval; 178 struct xhci_hcd *xhci; 179 struct hc_driver *driver; 180 struct usb_hcd *hcd; 181 182 driver = (struct hc_driver *)id->driver_data; 183 /* Register the USB 2.0 roothub. 184 * FIXME: USB core must know to register the USB 2.0 roothub first. 185 * This is sort of silly, because we could just set the HCD driver flags 186 * to say USB 2.0, but I'm not sure what the implications would be in 187 * the other parts of the HCD code. 188 */ 189 retval = usb_hcd_pci_probe(dev, id); 190 191 if (retval) 192 return retval; 193 194 /* USB 2.0 roothub is stored in the PCI device now. */ 195 hcd = dev_get_drvdata(&dev->dev); 196 xhci = hcd_to_xhci(hcd); 197 xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev, 198 pci_name(dev), hcd); 199 if (!xhci->shared_hcd) { 200 retval = -ENOMEM; 201 goto dealloc_usb2_hcd; 202 } 203 204 /* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset) 205 * is called by usb_add_hcd(). 206 */ 207 *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci; 208 209 retval = usb_add_hcd(xhci->shared_hcd, dev->irq, 210 IRQF_SHARED); 211 if (retval) 212 goto put_usb3_hcd; 213 /* Roothub already marked as USB 3.0 speed */ 214 215 /* We know the LPM timeout algorithms for this host, let the USB core 216 * enable and disable LPM for devices under the USB 3.0 roothub. 217 */ 218 if (xhci->quirks & XHCI_LPM_SUPPORT) 219 hcd_to_bus(xhci->shared_hcd)->root_hub->lpm_capable = 1; 220 221 return 0; 222 223 put_usb3_hcd: 224 usb_put_hcd(xhci->shared_hcd); 225 dealloc_usb2_hcd: 226 usb_hcd_pci_remove(dev); 227 return retval; 228 } 229 230 static void xhci_pci_remove(struct pci_dev *dev) 231 { 232 struct xhci_hcd *xhci; 233 234 xhci = hcd_to_xhci(pci_get_drvdata(dev)); 235 if (xhci->shared_hcd) { 236 usb_remove_hcd(xhci->shared_hcd); 237 usb_put_hcd(xhci->shared_hcd); 238 } 239 usb_hcd_pci_remove(dev); 240 241 /* Workaround for spurious wakeups at shutdown with HSW */ 242 if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) 243 pci_set_power_state(dev, PCI_D3hot); 244 245 kfree(xhci); 246 } 247 248 #ifdef CONFIG_PM 249 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) 250 { 251 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 252 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 253 254 /* 255 * Systems with the TI redriver that loses port status change events 256 * need to have the registers polled during D3, so avoid D3cold. 257 */ 258 if (xhci_compliance_mode_recovery_timer_quirk_check()) 259 pdev->no_d3cold = true; 260 261 return xhci_suspend(xhci); 262 } 263 264 static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) 265 { 266 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 267 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 268 int retval = 0; 269 270 /* The BIOS on systems with the Intel Panther Point chipset may or may 271 * not support xHCI natively. That means that during system resume, it 272 * may switch the ports back to EHCI so that users can use their 273 * keyboard to select a kernel from GRUB after resume from hibernate. 274 * 275 * The BIOS is supposed to remember whether the OS had xHCI ports 276 * enabled before resume, and switch the ports back to xHCI when the 277 * BIOS/OS semaphore is written, but we all know we can't trust BIOS 278 * writers. 279 * 280 * Unconditionally switch the ports back to xHCI after a system resume. 281 * It should not matter whether the EHCI or xHCI controller is 282 * resumed first. It's enough to do the switchover in xHCI because 283 * USB core won't notice anything as the hub driver doesn't start 284 * running again until after all the devices (including both EHCI and 285 * xHCI host controllers) have been resumed. 286 */ 287 288 if (pdev->vendor == PCI_VENDOR_ID_INTEL) 289 usb_enable_intel_xhci_ports(pdev); 290 291 retval = xhci_resume(xhci, hibernated); 292 return retval; 293 } 294 #endif /* CONFIG_PM */ 295 296 static const struct hc_driver xhci_pci_hc_driver = { 297 .description = hcd_name, 298 .product_desc = "xHCI Host Controller", 299 .hcd_priv_size = sizeof(struct xhci_hcd *), 300 301 /* 302 * generic hardware linkage 303 */ 304 .irq = xhci_irq, 305 .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED, 306 307 /* 308 * basic lifecycle operations 309 */ 310 .reset = xhci_pci_setup, 311 .start = xhci_run, 312 #ifdef CONFIG_PM 313 .pci_suspend = xhci_pci_suspend, 314 .pci_resume = xhci_pci_resume, 315 #endif 316 .stop = xhci_stop, 317 .shutdown = xhci_shutdown, 318 319 /* 320 * managing i/o requests and associated device resources 321 */ 322 .urb_enqueue = xhci_urb_enqueue, 323 .urb_dequeue = xhci_urb_dequeue, 324 .alloc_dev = xhci_alloc_dev, 325 .free_dev = xhci_free_dev, 326 .alloc_streams = xhci_alloc_streams, 327 .free_streams = xhci_free_streams, 328 .add_endpoint = xhci_add_endpoint, 329 .drop_endpoint = xhci_drop_endpoint, 330 .endpoint_reset = xhci_endpoint_reset, 331 .check_bandwidth = xhci_check_bandwidth, 332 .reset_bandwidth = xhci_reset_bandwidth, 333 .address_device = xhci_address_device, 334 .update_hub_device = xhci_update_hub_device, 335 .reset_device = xhci_discover_or_reset_device, 336 337 /* 338 * scheduling support 339 */ 340 .get_frame_number = xhci_get_frame, 341 342 /* Root hub support */ 343 .hub_control = xhci_hub_control, 344 .hub_status_data = xhci_hub_status_data, 345 .bus_suspend = xhci_bus_suspend, 346 .bus_resume = xhci_bus_resume, 347 /* 348 * call back when device connected and addressed 349 */ 350 .update_device = xhci_update_device, 351 .set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm, 352 .enable_usb3_lpm_timeout = xhci_enable_usb3_lpm_timeout, 353 .disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout, 354 .find_raw_port_number = xhci_find_raw_port_number, 355 }; 356 357 /*-------------------------------------------------------------------------*/ 358 359 /* PCI driver selection metadata; PCI hotplugging uses this */ 360 static const struct pci_device_id pci_ids[] = { { 361 /* handle any USB 3.0 xHCI controller */ 362 PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0), 363 .driver_data = (unsigned long) &xhci_pci_hc_driver, 364 }, 365 { /* end: all zeroes */ } 366 }; 367 MODULE_DEVICE_TABLE(pci, pci_ids); 368 369 /* pci driver glue; this is a "new style" PCI driver module */ 370 static struct pci_driver xhci_pci_driver = { 371 .name = (char *) hcd_name, 372 .id_table = pci_ids, 373 374 .probe = xhci_pci_probe, 375 .remove = xhci_pci_remove, 376 /* suspend and resume implemented later */ 377 378 .shutdown = usb_hcd_pci_shutdown, 379 #ifdef CONFIG_PM 380 .driver = { 381 .pm = &usb_hcd_pci_pm_ops 382 }, 383 #endif 384 }; 385 386 int __init xhci_register_pci(void) 387 { 388 return pci_register_driver(&xhci_pci_driver); 389 } 390 391 void xhci_unregister_pci(void) 392 { 393 pci_unregister_driver(&xhci_pci_driver); 394 } 395