1 /* 2 * xHCI host controller driver PCI Bus Glue. 3 * 4 * Copyright (C) 2008 Intel Corp. 5 * 6 * Author: Sarah Sharp 7 * Some code borrowed from the Linux EHCI driver. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 16 * for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software Foundation, 20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 */ 22 23 #include <linux/pci.h> 24 #include <linux/slab.h> 25 #include <linux/module.h> 26 #include <linux/acpi.h> 27 28 #include "xhci.h" 29 #include "xhci-trace.h" 30 31 #define PORT2_SSIC_CONFIG_REG2 0x883c 32 #define PROG_DONE (1 << 30) 33 #define SSIC_PORT_UNUSED (1 << 31) 34 35 /* Device for a quirk */ 36 #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 37 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 38 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 39 40 #define PCI_VENDOR_ID_ETRON 0x1b6f 41 #define PCI_DEVICE_ID_EJ168 0x7023 42 43 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 44 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 45 #define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5 46 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f 47 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f 48 49 static const char hcd_name[] = "xhci_hcd"; 50 51 static struct hc_driver __read_mostly xhci_pci_hc_driver; 52 53 static int xhci_pci_setup(struct usb_hcd *hcd); 54 55 static const struct xhci_driver_overrides xhci_pci_overrides __initconst = { 56 .extra_priv_size = sizeof(struct xhci_hcd), 57 .reset = xhci_pci_setup, 58 }; 59 60 /* called after powerup, by probe or system-pm "wakeup" */ 61 static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) 62 { 63 /* 64 * TODO: Implement finding debug ports later. 65 * TODO: see if there are any quirks that need to be added to handle 66 * new extended capabilities. 67 */ 68 69 /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ 70 if (!pci_set_mwi(pdev)) 71 xhci_dbg(xhci, "MWI active\n"); 72 73 xhci_dbg(xhci, "Finished xhci_pci_reinit\n"); 74 return 0; 75 } 76 77 static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) 78 { 79 struct pci_dev *pdev = to_pci_dev(dev); 80 81 /* Look for vendor-specific quirks */ 82 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && 83 (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK || 84 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) { 85 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && 86 pdev->revision == 0x0) { 87 xhci->quirks |= XHCI_RESET_EP_QUIRK; 88 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 89 "QUIRK: Fresco Logic xHC needs configure" 90 " endpoint cmd after reset endpoint"); 91 } 92 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && 93 pdev->revision == 0x4) { 94 xhci->quirks |= XHCI_SLOW_SUSPEND; 95 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 96 "QUIRK: Fresco Logic xHC revision %u" 97 "must be suspended extra slowly", 98 pdev->revision); 99 } 100 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) 101 xhci->quirks |= XHCI_BROKEN_STREAMS; 102 /* Fresco Logic confirms: all revisions of this chip do not 103 * support MSI, even though some of them claim to in their PCI 104 * capabilities. 105 */ 106 xhci->quirks |= XHCI_BROKEN_MSI; 107 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 108 "QUIRK: Fresco Logic revision %u " 109 "has broken MSI implementation", 110 pdev->revision); 111 xhci->quirks |= XHCI_TRUST_TX_LENGTH; 112 } 113 114 if (pdev->vendor == PCI_VENDOR_ID_NEC) 115 xhci->quirks |= XHCI_NEC_HOST; 116 117 if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) 118 xhci->quirks |= XHCI_AMD_0x96_HOST; 119 120 /* AMD PLL quirk */ 121 if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) 122 xhci->quirks |= XHCI_AMD_PLL_FIX; 123 124 if (pdev->vendor == PCI_VENDOR_ID_AMD) 125 xhci->quirks |= XHCI_TRUST_TX_LENGTH; 126 127 if (pdev->vendor == PCI_VENDOR_ID_INTEL) { 128 xhci->quirks |= XHCI_LPM_SUPPORT; 129 xhci->quirks |= XHCI_INTEL_HOST; 130 xhci->quirks |= XHCI_AVOID_BEI; 131 } 132 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 133 pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { 134 xhci->quirks |= XHCI_EP_LIMIT_QUIRK; 135 xhci->limit_active_eps = 64; 136 xhci->quirks |= XHCI_SW_BW_CHECKING; 137 /* 138 * PPT desktop boards DH77EB and DH77DF will power back on after 139 * a few seconds of being shutdown. The fix for this is to 140 * switch the ports from xHCI to EHCI on shutdown. We can't use 141 * DMI information to find those particular boards (since each 142 * vendor will change the board name), so we have to key off all 143 * PPT chipsets. 144 */ 145 xhci->quirks |= XHCI_SPURIOUS_REBOOT; 146 } 147 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 148 pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) { 149 xhci->quirks |= XHCI_SPURIOUS_REBOOT; 150 } 151 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 152 (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || 153 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || 154 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) { 155 xhci->quirks |= XHCI_PME_STUCK_QUIRK; 156 } 157 if (pdev->vendor == PCI_VENDOR_ID_ETRON && 158 pdev->device == PCI_DEVICE_ID_EJ168) { 159 xhci->quirks |= XHCI_RESET_ON_RESUME; 160 xhci->quirks |= XHCI_TRUST_TX_LENGTH; 161 xhci->quirks |= XHCI_BROKEN_STREAMS; 162 } 163 if (pdev->vendor == PCI_VENDOR_ID_RENESAS && 164 pdev->device == 0x0015) 165 xhci->quirks |= XHCI_RESET_ON_RESUME; 166 if (pdev->vendor == PCI_VENDOR_ID_VIA) 167 xhci->quirks |= XHCI_RESET_ON_RESUME; 168 169 /* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */ 170 if (pdev->vendor == PCI_VENDOR_ID_VIA && 171 pdev->device == 0x3432) 172 xhci->quirks |= XHCI_BROKEN_STREAMS; 173 174 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && 175 pdev->device == 0x1042) 176 xhci->quirks |= XHCI_BROKEN_STREAMS; 177 178 if (xhci->quirks & XHCI_RESET_ON_RESUME) 179 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 180 "QUIRK: Resetting on resume"); 181 } 182 183 #ifdef CONFIG_ACPI 184 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) 185 { 186 static const u8 intel_dsm_uuid[] = { 187 0xb7, 0x0c, 0x34, 0xac, 0x01, 0xe9, 0xbf, 0x45, 188 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23, 189 }; 190 acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, NULL); 191 } 192 #else 193 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } 194 #endif /* CONFIG_ACPI */ 195 196 /* called during probe() after chip reset completes */ 197 static int xhci_pci_setup(struct usb_hcd *hcd) 198 { 199 struct xhci_hcd *xhci; 200 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 201 int retval; 202 203 retval = xhci_gen_setup(hcd, xhci_pci_quirks); 204 if (retval) 205 return retval; 206 207 xhci = hcd_to_xhci(hcd); 208 if (!usb_hcd_is_primary_hcd(hcd)) 209 return 0; 210 211 pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); 212 xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); 213 214 /* Find any debug ports */ 215 retval = xhci_pci_reinit(xhci, pdev); 216 if (!retval) 217 return retval; 218 219 return retval; 220 } 221 222 /* 223 * We need to register our own PCI probe function (instead of the USB core's 224 * function) in order to create a second roothub under xHCI. 225 */ 226 static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) 227 { 228 int retval; 229 struct xhci_hcd *xhci; 230 struct hc_driver *driver; 231 struct usb_hcd *hcd; 232 233 driver = (struct hc_driver *)id->driver_data; 234 235 /* Prevent runtime suspending between USB-2 and USB-3 initialization */ 236 pm_runtime_get_noresume(&dev->dev); 237 238 /* Register the USB 2.0 roothub. 239 * FIXME: USB core must know to register the USB 2.0 roothub first. 240 * This is sort of silly, because we could just set the HCD driver flags 241 * to say USB 2.0, but I'm not sure what the implications would be in 242 * the other parts of the HCD code. 243 */ 244 retval = usb_hcd_pci_probe(dev, id); 245 246 if (retval) 247 goto put_runtime_pm; 248 249 /* USB 2.0 roothub is stored in the PCI device now. */ 250 hcd = dev_get_drvdata(&dev->dev); 251 xhci = hcd_to_xhci(hcd); 252 xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev, 253 pci_name(dev), hcd); 254 if (!xhci->shared_hcd) { 255 retval = -ENOMEM; 256 goto dealloc_usb2_hcd; 257 } 258 259 retval = usb_add_hcd(xhci->shared_hcd, dev->irq, 260 IRQF_SHARED); 261 if (retval) 262 goto put_usb3_hcd; 263 /* Roothub already marked as USB 3.0 speed */ 264 265 if (!(xhci->quirks & XHCI_BROKEN_STREAMS) && 266 HCC_MAX_PSA(xhci->hcc_params) >= 4) 267 xhci->shared_hcd->can_do_streams = 1; 268 269 if (xhci->quirks & XHCI_PME_STUCK_QUIRK) 270 xhci_pme_acpi_rtd3_enable(dev); 271 272 /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ 273 pm_runtime_put_noidle(&dev->dev); 274 275 return 0; 276 277 put_usb3_hcd: 278 usb_put_hcd(xhci->shared_hcd); 279 dealloc_usb2_hcd: 280 usb_hcd_pci_remove(dev); 281 put_runtime_pm: 282 pm_runtime_put_noidle(&dev->dev); 283 return retval; 284 } 285 286 static void xhci_pci_remove(struct pci_dev *dev) 287 { 288 struct xhci_hcd *xhci; 289 290 xhci = hcd_to_xhci(pci_get_drvdata(dev)); 291 if (xhci->shared_hcd) { 292 usb_remove_hcd(xhci->shared_hcd); 293 usb_put_hcd(xhci->shared_hcd); 294 } 295 usb_hcd_pci_remove(dev); 296 297 /* Workaround for spurious wakeups at shutdown with HSW */ 298 if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) 299 pci_set_power_state(dev, PCI_D3hot); 300 } 301 302 #ifdef CONFIG_PM 303 /* 304 * In some Intel xHCI controllers, in order to get D3 working, 305 * through a vendor specific SSIC CONFIG register at offset 0x883c, 306 * SSIC PORT need to be marked as "unused" before putting xHCI 307 * into D3. After D3 exit, the SSIC port need to be marked as "used". 308 * Without this change, xHCI might not enter D3 state. 309 * Make sure PME works on some Intel xHCI controllers by writing 1 to clear 310 * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 311 */ 312 static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend) 313 { 314 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 315 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 316 u32 val; 317 void __iomem *reg; 318 319 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 320 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { 321 322 reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2; 323 324 /* Notify SSIC that SSIC profile programming is not done */ 325 val = readl(reg) & ~PROG_DONE; 326 writel(val, reg); 327 328 /* Mark SSIC port as unused(suspend) or used(resume) */ 329 val = readl(reg); 330 if (suspend) 331 val |= SSIC_PORT_UNUSED; 332 else 333 val &= ~SSIC_PORT_UNUSED; 334 writel(val, reg); 335 336 /* Notify SSIC that SSIC profile programming is done */ 337 val = readl(reg) | PROG_DONE; 338 writel(val, reg); 339 readl(reg); 340 } 341 342 reg = (void __iomem *) xhci->cap_regs + 0x80a4; 343 val = readl(reg); 344 writel(val | BIT(28), reg); 345 readl(reg); 346 } 347 348 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) 349 { 350 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 351 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 352 353 /* 354 * Systems with the TI redriver that loses port status change events 355 * need to have the registers polled during D3, so avoid D3cold. 356 */ 357 if (xhci->quirks & XHCI_COMP_MODE_QUIRK) 358 pdev->no_d3cold = true; 359 360 if (xhci->quirks & XHCI_PME_STUCK_QUIRK) 361 xhci_pme_quirk(hcd, true); 362 363 return xhci_suspend(xhci, do_wakeup); 364 } 365 366 static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) 367 { 368 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 369 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 370 int retval = 0; 371 372 /* The BIOS on systems with the Intel Panther Point chipset may or may 373 * not support xHCI natively. That means that during system resume, it 374 * may switch the ports back to EHCI so that users can use their 375 * keyboard to select a kernel from GRUB after resume from hibernate. 376 * 377 * The BIOS is supposed to remember whether the OS had xHCI ports 378 * enabled before resume, and switch the ports back to xHCI when the 379 * BIOS/OS semaphore is written, but we all know we can't trust BIOS 380 * writers. 381 * 382 * Unconditionally switch the ports back to xHCI after a system resume. 383 * It should not matter whether the EHCI or xHCI controller is 384 * resumed first. It's enough to do the switchover in xHCI because 385 * USB core won't notice anything as the hub driver doesn't start 386 * running again until after all the devices (including both EHCI and 387 * xHCI host controllers) have been resumed. 388 */ 389 390 if (pdev->vendor == PCI_VENDOR_ID_INTEL) 391 usb_enable_intel_xhci_ports(pdev); 392 393 if (xhci->quirks & XHCI_PME_STUCK_QUIRK) 394 xhci_pme_quirk(hcd, false); 395 396 retval = xhci_resume(xhci, hibernated); 397 return retval; 398 } 399 #endif /* CONFIG_PM */ 400 401 /*-------------------------------------------------------------------------*/ 402 403 /* PCI driver selection metadata; PCI hotplugging uses this */ 404 static const struct pci_device_id pci_ids[] = { { 405 /* handle any USB 3.0 xHCI controller */ 406 PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0), 407 .driver_data = (unsigned long) &xhci_pci_hc_driver, 408 }, 409 { /* end: all zeroes */ } 410 }; 411 MODULE_DEVICE_TABLE(pci, pci_ids); 412 413 /* pci driver glue; this is a "new style" PCI driver module */ 414 static struct pci_driver xhci_pci_driver = { 415 .name = (char *) hcd_name, 416 .id_table = pci_ids, 417 418 .probe = xhci_pci_probe, 419 .remove = xhci_pci_remove, 420 /* suspend and resume implemented later */ 421 422 .shutdown = usb_hcd_pci_shutdown, 423 #ifdef CONFIG_PM 424 .driver = { 425 .pm = &usb_hcd_pci_pm_ops 426 }, 427 #endif 428 }; 429 430 static int __init xhci_pci_init(void) 431 { 432 xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides); 433 #ifdef CONFIG_PM 434 xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend; 435 xhci_pci_hc_driver.pci_resume = xhci_pci_resume; 436 #endif 437 return pci_register_driver(&xhci_pci_driver); 438 } 439 module_init(xhci_pci_init); 440 441 static void __exit xhci_pci_exit(void) 442 { 443 pci_unregister_driver(&xhci_pci_driver); 444 } 445 module_exit(xhci_pci_exit); 446 447 MODULE_DESCRIPTION("xHCI PCI Host Controller Driver"); 448 MODULE_LICENSE("GPL"); 449