1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * xHCI host controller driver PCI Bus Glue. 4 * 5 * Copyright (C) 2008 Intel Corp. 6 * 7 * Author: Sarah Sharp 8 * Some code borrowed from the Linux EHCI driver. 9 */ 10 11 #include <linux/pci.h> 12 #include <linux/slab.h> 13 #include <linux/module.h> 14 #include <linux/acpi.h> 15 #include <linux/reset.h> 16 17 #include "xhci.h" 18 #include "xhci-trace.h" 19 #include "xhci-pci.h" 20 21 #define SSIC_PORT_NUM 2 22 #define SSIC_PORT_CFG2 0x880c 23 #define SSIC_PORT_CFG2_OFFSET 0x30 24 #define PROG_DONE (1 << 30) 25 #define SSIC_PORT_UNUSED (1 << 31) 26 #define SPARSE_DISABLE_BIT 17 27 #define SPARSE_CNTL_ENABLE 0xC12C 28 29 /* Device for a quirk */ 30 #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 31 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 32 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009 33 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 0x1100 34 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 35 36 #define PCI_VENDOR_ID_ETRON 0x1b6f 37 #define PCI_DEVICE_ID_EJ168 0x7023 38 39 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 40 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 41 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1 42 #define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5 43 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f 44 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f 45 #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8 46 #define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8 47 #define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8 48 #define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0 49 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI 0x15b5 50 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI 0x15b6 51 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI 0x15c1 52 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI 0x15db 53 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI 0x15d4 54 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI 0x15e9 55 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec 56 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0 57 #define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI 0x8a13 58 #define PCI_DEVICE_ID_INTEL_CML_XHCI 0xa3af 59 #define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13 60 #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138 61 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI 0x461e 62 63 #define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 64 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 65 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba 66 #define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb 67 #define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc 68 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1 0x161a 69 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2 0x161b 70 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3 0x161d 71 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 0x161e 72 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 0x15d6 73 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6 0x15d7 74 75 #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042 76 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 77 #define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242 78 #define PCI_DEVICE_ID_ASMEDIA_2142_XHCI 0x2142 79 #define PCI_DEVICE_ID_ASMEDIA_3242_XHCI 0x3242 80 81 static const char hcd_name[] = "xhci_hcd"; 82 83 static struct hc_driver __read_mostly xhci_pci_hc_driver; 84 85 static int xhci_pci_setup(struct usb_hcd *hcd); 86 87 static const struct xhci_driver_overrides xhci_pci_overrides __initconst = { 88 .reset = xhci_pci_setup, 89 }; 90 91 /* called after powerup, by probe or system-pm "wakeup" */ 92 static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) 93 { 94 /* 95 * TODO: Implement finding debug ports later. 96 * TODO: see if there are any quirks that need to be added to handle 97 * new extended capabilities. 98 */ 99 100 /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ 101 if (!pci_set_mwi(pdev)) 102 xhci_dbg(xhci, "MWI active\n"); 103 104 xhci_dbg(xhci, "Finished xhci_pci_reinit\n"); 105 return 0; 106 } 107 108 static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) 109 { 110 struct pci_dev *pdev = to_pci_dev(dev); 111 struct xhci_driver_data *driver_data; 112 const struct pci_device_id *id; 113 114 id = pci_match_id(to_pci_driver(pdev->dev.driver)->id_table, pdev); 115 116 if (id && id->driver_data) { 117 driver_data = (struct xhci_driver_data *)id->driver_data; 118 xhci->quirks |= driver_data->quirks; 119 } 120 121 /* Look for vendor-specific quirks */ 122 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && 123 (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK || 124 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 || 125 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) { 126 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && 127 pdev->revision == 0x0) { 128 xhci->quirks |= XHCI_RESET_EP_QUIRK; 129 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 130 "QUIRK: Fresco Logic xHC needs configure" 131 " endpoint cmd after reset endpoint"); 132 } 133 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && 134 pdev->revision == 0x4) { 135 xhci->quirks |= XHCI_SLOW_SUSPEND; 136 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 137 "QUIRK: Fresco Logic xHC revision %u" 138 "must be suspended extra slowly", 139 pdev->revision); 140 } 141 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) 142 xhci->quirks |= XHCI_BROKEN_STREAMS; 143 /* Fresco Logic confirms: all revisions of this chip do not 144 * support MSI, even though some of them claim to in their PCI 145 * capabilities. 146 */ 147 xhci->quirks |= XHCI_BROKEN_MSI; 148 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 149 "QUIRK: Fresco Logic revision %u " 150 "has broken MSI implementation", 151 pdev->revision); 152 xhci->quirks |= XHCI_TRUST_TX_LENGTH; 153 } 154 155 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && 156 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009) 157 xhci->quirks |= XHCI_BROKEN_STREAMS; 158 159 if (pdev->vendor == PCI_VENDOR_ID_NEC) 160 xhci->quirks |= XHCI_NEC_HOST; 161 162 if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) 163 xhci->quirks |= XHCI_AMD_0x96_HOST; 164 165 /* AMD PLL quirk */ 166 if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check()) 167 xhci->quirks |= XHCI_AMD_PLL_FIX; 168 169 if (pdev->vendor == PCI_VENDOR_ID_AMD && 170 (pdev->device == 0x145c || 171 pdev->device == 0x15e0 || 172 pdev->device == 0x15e1 || 173 pdev->device == 0x43bb)) 174 xhci->quirks |= XHCI_SUSPEND_DELAY; 175 176 if (pdev->vendor == PCI_VENDOR_ID_AMD && 177 (pdev->device == 0x15e0 || pdev->device == 0x15e1)) 178 xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND; 179 180 if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) { 181 xhci->quirks |= XHCI_DISABLE_SPARSE; 182 xhci->quirks |= XHCI_RESET_ON_RESUME; 183 } 184 185 if (pdev->vendor == PCI_VENDOR_ID_AMD) 186 xhci->quirks |= XHCI_TRUST_TX_LENGTH; 187 188 if ((pdev->vendor == PCI_VENDOR_ID_AMD) && 189 ((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) || 190 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) || 191 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) || 192 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1))) 193 xhci->quirks |= XHCI_U2_DISABLE_WAKE; 194 195 if (pdev->vendor == PCI_VENDOR_ID_AMD && 196 pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI) 197 xhci->quirks |= XHCI_BROKEN_D3COLD; 198 199 if (pdev->vendor == PCI_VENDOR_ID_INTEL) { 200 xhci->quirks |= XHCI_LPM_SUPPORT; 201 xhci->quirks |= XHCI_INTEL_HOST; 202 xhci->quirks |= XHCI_AVOID_BEI; 203 } 204 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 205 pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { 206 xhci->quirks |= XHCI_EP_LIMIT_QUIRK; 207 xhci->limit_active_eps = 64; 208 xhci->quirks |= XHCI_SW_BW_CHECKING; 209 /* 210 * PPT desktop boards DH77EB and DH77DF will power back on after 211 * a few seconds of being shutdown. The fix for this is to 212 * switch the ports from xHCI to EHCI on shutdown. We can't use 213 * DMI information to find those particular boards (since each 214 * vendor will change the board name), so we have to key off all 215 * PPT chipsets. 216 */ 217 xhci->quirks |= XHCI_SPURIOUS_REBOOT; 218 } 219 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 220 (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI || 221 pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) { 222 xhci->quirks |= XHCI_SPURIOUS_REBOOT; 223 xhci->quirks |= XHCI_SPURIOUS_WAKEUP; 224 } 225 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 226 (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || 227 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || 228 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || 229 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || 230 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI || 231 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || 232 pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI || 233 pdev->device == PCI_DEVICE_ID_INTEL_CML_XHCI)) { 234 xhci->quirks |= XHCI_PME_STUCK_QUIRK; 235 } 236 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 237 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) 238 xhci->quirks |= XHCI_SSIC_PORT_UNUSED; 239 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 240 (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || 241 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || 242 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) 243 xhci->quirks |= XHCI_INTEL_USB_ROLE_SW; 244 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 245 (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || 246 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || 247 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || 248 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || 249 pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) 250 xhci->quirks |= XHCI_MISSING_CAS; 251 252 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 253 (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI || 254 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI || 255 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI || 256 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI || 257 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI || 258 pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI || 259 pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI || 260 pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI || 261 pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI || 262 pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI || 263 pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI || 264 pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI)) 265 xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW; 266 267 if (pdev->vendor == PCI_VENDOR_ID_ETRON && 268 pdev->device == PCI_DEVICE_ID_EJ168) { 269 xhci->quirks |= XHCI_RESET_ON_RESUME; 270 xhci->quirks |= XHCI_TRUST_TX_LENGTH; 271 xhci->quirks |= XHCI_BROKEN_STREAMS; 272 } 273 if (pdev->vendor == PCI_VENDOR_ID_RENESAS && 274 pdev->device == 0x0014) { 275 xhci->quirks |= XHCI_TRUST_TX_LENGTH; 276 xhci->quirks |= XHCI_ZERO_64B_REGS; 277 } 278 if (pdev->vendor == PCI_VENDOR_ID_RENESAS && 279 pdev->device == 0x0015) { 280 xhci->quirks |= XHCI_RESET_ON_RESUME; 281 xhci->quirks |= XHCI_ZERO_64B_REGS; 282 } 283 if (pdev->vendor == PCI_VENDOR_ID_VIA) 284 xhci->quirks |= XHCI_RESET_ON_RESUME; 285 286 /* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */ 287 if (pdev->vendor == PCI_VENDOR_ID_VIA && 288 pdev->device == 0x3432) 289 xhci->quirks |= XHCI_BROKEN_STREAMS; 290 291 if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { 292 xhci->quirks |= XHCI_LPM_SUPPORT; 293 xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS; 294 } 295 296 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && 297 pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) 298 xhci->quirks |= XHCI_BROKEN_STREAMS; 299 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && 300 pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) { 301 xhci->quirks |= XHCI_TRUST_TX_LENGTH; 302 xhci->quirks |= XHCI_NO_64BIT_SUPPORT; 303 } 304 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && 305 (pdev->device == PCI_DEVICE_ID_ASMEDIA_1142_XHCI || 306 pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI || 307 pdev->device == PCI_DEVICE_ID_ASMEDIA_3242_XHCI)) 308 xhci->quirks |= XHCI_NO_64BIT_SUPPORT; 309 310 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && 311 pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) 312 xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL; 313 314 if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) 315 xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7; 316 317 if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM || 318 pdev->vendor == PCI_VENDOR_ID_CAVIUM) && 319 pdev->device == 0x9026) 320 xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT; 321 322 if (pdev->vendor == PCI_VENDOR_ID_AMD && 323 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2 || 324 pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4)) 325 xhci->quirks |= XHCI_NO_SOFT_RETRY; 326 327 if (pdev->vendor == PCI_VENDOR_ID_AMD && 328 (pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1 || 329 pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2 || 330 pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3 || 331 pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 || 332 pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 || 333 pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6)) 334 xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW; 335 336 if (xhci->quirks & XHCI_RESET_ON_RESUME) 337 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 338 "QUIRK: Resetting on resume"); 339 } 340 341 #ifdef CONFIG_ACPI 342 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) 343 { 344 static const guid_t intel_dsm_guid = 345 GUID_INIT(0xac340cb7, 0xe901, 0x45bf, 346 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23); 347 union acpi_object *obj; 348 349 obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), &intel_dsm_guid, 3, 1, 350 NULL); 351 ACPI_FREE(obj); 352 } 353 #else 354 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } 355 #endif /* CONFIG_ACPI */ 356 357 /* called during probe() after chip reset completes */ 358 static int xhci_pci_setup(struct usb_hcd *hcd) 359 { 360 struct xhci_hcd *xhci; 361 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 362 int retval; 363 364 xhci = hcd_to_xhci(hcd); 365 if (!xhci->sbrn) 366 pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); 367 368 /* imod_interval is the interrupt moderation value in nanoseconds. */ 369 xhci->imod_interval = 40000; 370 371 retval = xhci_gen_setup(hcd, xhci_pci_quirks); 372 if (retval) 373 return retval; 374 375 if (!usb_hcd_is_primary_hcd(hcd)) 376 return 0; 377 378 if (xhci->quirks & XHCI_PME_STUCK_QUIRK) 379 xhci_pme_acpi_rtd3_enable(pdev); 380 381 xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); 382 383 /* Find any debug ports */ 384 return xhci_pci_reinit(xhci, pdev); 385 } 386 387 /* 388 * We need to register our own PCI probe function (instead of the USB core's 389 * function) in order to create a second roothub under xHCI. 390 */ 391 static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) 392 { 393 int retval; 394 struct xhci_hcd *xhci; 395 struct usb_hcd *hcd; 396 struct xhci_driver_data *driver_data; 397 struct reset_control *reset; 398 399 driver_data = (struct xhci_driver_data *)id->driver_data; 400 if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) { 401 retval = renesas_xhci_check_request_fw(dev, id); 402 if (retval) 403 return retval; 404 } 405 406 reset = devm_reset_control_get_optional_exclusive(&dev->dev, NULL); 407 if (IS_ERR(reset)) 408 return PTR_ERR(reset); 409 reset_control_reset(reset); 410 411 /* Prevent runtime suspending between USB-2 and USB-3 initialization */ 412 pm_runtime_get_noresume(&dev->dev); 413 414 /* Register the USB 2.0 roothub. 415 * FIXME: USB core must know to register the USB 2.0 roothub first. 416 * This is sort of silly, because we could just set the HCD driver flags 417 * to say USB 2.0, but I'm not sure what the implications would be in 418 * the other parts of the HCD code. 419 */ 420 retval = usb_hcd_pci_probe(dev, id, &xhci_pci_hc_driver); 421 422 if (retval) 423 goto put_runtime_pm; 424 425 /* USB 2.0 roothub is stored in the PCI device now. */ 426 hcd = dev_get_drvdata(&dev->dev); 427 xhci = hcd_to_xhci(hcd); 428 xhci->reset = reset; 429 xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev, 430 pci_name(dev), hcd); 431 if (!xhci->shared_hcd) { 432 retval = -ENOMEM; 433 goto dealloc_usb2_hcd; 434 } 435 436 retval = xhci_ext_cap_init(xhci); 437 if (retval) 438 goto put_usb3_hcd; 439 440 retval = usb_add_hcd(xhci->shared_hcd, dev->irq, 441 IRQF_SHARED); 442 if (retval) 443 goto put_usb3_hcd; 444 /* Roothub already marked as USB 3.0 speed */ 445 446 if (!(xhci->quirks & XHCI_BROKEN_STREAMS) && 447 HCC_MAX_PSA(xhci->hcc_params) >= 4) 448 xhci->shared_hcd->can_do_streams = 1; 449 450 /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ 451 pm_runtime_put_noidle(&dev->dev); 452 453 if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW) 454 pm_runtime_allow(&dev->dev); 455 456 return 0; 457 458 put_usb3_hcd: 459 usb_put_hcd(xhci->shared_hcd); 460 dealloc_usb2_hcd: 461 usb_hcd_pci_remove(dev); 462 put_runtime_pm: 463 pm_runtime_put_noidle(&dev->dev); 464 return retval; 465 } 466 467 static void xhci_pci_remove(struct pci_dev *dev) 468 { 469 struct xhci_hcd *xhci; 470 471 xhci = hcd_to_xhci(pci_get_drvdata(dev)); 472 473 xhci->xhc_state |= XHCI_STATE_REMOVING; 474 475 if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW) 476 pm_runtime_forbid(&dev->dev); 477 478 if (xhci->shared_hcd) { 479 usb_remove_hcd(xhci->shared_hcd); 480 usb_put_hcd(xhci->shared_hcd); 481 xhci->shared_hcd = NULL; 482 } 483 484 /* Workaround for spurious wakeups at shutdown with HSW */ 485 if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) 486 pci_set_power_state(dev, PCI_D3hot); 487 488 usb_hcd_pci_remove(dev); 489 } 490 491 #ifdef CONFIG_PM 492 /* 493 * In some Intel xHCI controllers, in order to get D3 working, 494 * through a vendor specific SSIC CONFIG register at offset 0x883c, 495 * SSIC PORT need to be marked as "unused" before putting xHCI 496 * into D3. After D3 exit, the SSIC port need to be marked as "used". 497 * Without this change, xHCI might not enter D3 state. 498 */ 499 static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend) 500 { 501 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 502 u32 val; 503 void __iomem *reg; 504 int i; 505 506 for (i = 0; i < SSIC_PORT_NUM; i++) { 507 reg = (void __iomem *) xhci->cap_regs + 508 SSIC_PORT_CFG2 + 509 i * SSIC_PORT_CFG2_OFFSET; 510 511 /* Notify SSIC that SSIC profile programming is not done. */ 512 val = readl(reg) & ~PROG_DONE; 513 writel(val, reg); 514 515 /* Mark SSIC port as unused(suspend) or used(resume) */ 516 val = readl(reg); 517 if (suspend) 518 val |= SSIC_PORT_UNUSED; 519 else 520 val &= ~SSIC_PORT_UNUSED; 521 writel(val, reg); 522 523 /* Notify SSIC that SSIC profile programming is done */ 524 val = readl(reg) | PROG_DONE; 525 writel(val, reg); 526 readl(reg); 527 } 528 } 529 530 /* 531 * Make sure PME works on some Intel xHCI controllers by writing 1 to clear 532 * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 533 */ 534 static void xhci_pme_quirk(struct usb_hcd *hcd) 535 { 536 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 537 void __iomem *reg; 538 u32 val; 539 540 reg = (void __iomem *) xhci->cap_regs + 0x80a4; 541 val = readl(reg); 542 writel(val | BIT(28), reg); 543 readl(reg); 544 } 545 546 static void xhci_sparse_control_quirk(struct usb_hcd *hcd) 547 { 548 u32 reg; 549 550 reg = readl(hcd->regs + SPARSE_CNTL_ENABLE); 551 reg &= ~BIT(SPARSE_DISABLE_BIT); 552 writel(reg, hcd->regs + SPARSE_CNTL_ENABLE); 553 } 554 555 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) 556 { 557 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 558 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 559 int ret; 560 561 /* 562 * Systems with the TI redriver that loses port status change events 563 * need to have the registers polled during D3, so avoid D3cold. 564 */ 565 if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD)) 566 pci_d3cold_disable(pdev); 567 568 if (xhci->quirks & XHCI_PME_STUCK_QUIRK) 569 xhci_pme_quirk(hcd); 570 571 if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) 572 xhci_ssic_port_unused_quirk(hcd, true); 573 574 if (xhci->quirks & XHCI_DISABLE_SPARSE) 575 xhci_sparse_control_quirk(hcd); 576 577 ret = xhci_suspend(xhci, do_wakeup); 578 if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED)) 579 xhci_ssic_port_unused_quirk(hcd, false); 580 581 return ret; 582 } 583 584 static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) 585 { 586 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 587 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 588 int retval = 0; 589 590 reset_control_reset(xhci->reset); 591 592 /* The BIOS on systems with the Intel Panther Point chipset may or may 593 * not support xHCI natively. That means that during system resume, it 594 * may switch the ports back to EHCI so that users can use their 595 * keyboard to select a kernel from GRUB after resume from hibernate. 596 * 597 * The BIOS is supposed to remember whether the OS had xHCI ports 598 * enabled before resume, and switch the ports back to xHCI when the 599 * BIOS/OS semaphore is written, but we all know we can't trust BIOS 600 * writers. 601 * 602 * Unconditionally switch the ports back to xHCI after a system resume. 603 * It should not matter whether the EHCI or xHCI controller is 604 * resumed first. It's enough to do the switchover in xHCI because 605 * USB core won't notice anything as the hub driver doesn't start 606 * running again until after all the devices (including both EHCI and 607 * xHCI host controllers) have been resumed. 608 */ 609 610 if (pdev->vendor == PCI_VENDOR_ID_INTEL) 611 usb_enable_intel_xhci_ports(pdev); 612 613 if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) 614 xhci_ssic_port_unused_quirk(hcd, false); 615 616 if (xhci->quirks & XHCI_PME_STUCK_QUIRK) 617 xhci_pme_quirk(hcd); 618 619 retval = xhci_resume(xhci, hibernated); 620 return retval; 621 } 622 623 static void xhci_pci_shutdown(struct usb_hcd *hcd) 624 { 625 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 626 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 627 628 xhci_shutdown(hcd); 629 630 /* Yet another workaround for spurious wakeups at shutdown with HSW */ 631 if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) 632 pci_set_power_state(pdev, PCI_D3hot); 633 } 634 #endif /* CONFIG_PM */ 635 636 /*-------------------------------------------------------------------------*/ 637 638 static const struct xhci_driver_data reneses_data = { 639 .quirks = XHCI_RENESAS_FW_QUIRK, 640 .firmware = "renesas_usb_fw.mem", 641 }; 642 643 /* PCI driver selection metadata; PCI hotplugging uses this */ 644 static const struct pci_device_id pci_ids[] = { 645 { PCI_DEVICE(0x1912, 0x0014), 646 .driver_data = (unsigned long)&reneses_data, 647 }, 648 { PCI_DEVICE(0x1912, 0x0015), 649 .driver_data = (unsigned long)&reneses_data, 650 }, 651 /* handle any USB 3.0 xHCI controller */ 652 { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0), 653 }, 654 { /* end: all zeroes */ } 655 }; 656 MODULE_DEVICE_TABLE(pci, pci_ids); 657 658 /* 659 * Without CONFIG_USB_XHCI_PCI_RENESAS renesas_xhci_check_request_fw() won't 660 * load firmware, so don't encumber the xhci-pci driver with it. 661 */ 662 #if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS) 663 MODULE_FIRMWARE("renesas_usb_fw.mem"); 664 #endif 665 666 /* pci driver glue; this is a "new style" PCI driver module */ 667 static struct pci_driver xhci_pci_driver = { 668 .name = hcd_name, 669 .id_table = pci_ids, 670 671 .probe = xhci_pci_probe, 672 .remove = xhci_pci_remove, 673 /* suspend and resume implemented later */ 674 675 .shutdown = usb_hcd_pci_shutdown, 676 #ifdef CONFIG_PM 677 .driver = { 678 .pm = &usb_hcd_pci_pm_ops 679 }, 680 #endif 681 }; 682 683 static int __init xhci_pci_init(void) 684 { 685 xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides); 686 #ifdef CONFIG_PM 687 xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend; 688 xhci_pci_hc_driver.pci_resume = xhci_pci_resume; 689 xhci_pci_hc_driver.shutdown = xhci_pci_shutdown; 690 #endif 691 return pci_register_driver(&xhci_pci_driver); 692 } 693 module_init(xhci_pci_init); 694 695 static void __exit xhci_pci_exit(void) 696 { 697 pci_unregister_driver(&xhci_pci_driver); 698 } 699 module_exit(xhci_pci_exit); 700 701 MODULE_DESCRIPTION("xHCI PCI Host Controller Driver"); 702 MODULE_LICENSE("GPL"); 703