1 /* 2 * xHCI host controller driver PCI Bus Glue. 3 * 4 * Copyright (C) 2008 Intel Corp. 5 * 6 * Author: Sarah Sharp 7 * Some code borrowed from the Linux EHCI driver. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 16 * for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software Foundation, 20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 */ 22 23 #include <linux/pci.h> 24 #include <linux/slab.h> 25 #include <linux/module.h> 26 #include <linux/acpi.h> 27 28 #include "xhci.h" 29 #include "xhci-trace.h" 30 31 #define SSIC_PORT_NUM 2 32 #define SSIC_PORT_CFG2 0x880c 33 #define SSIC_PORT_CFG2_OFFSET 0x30 34 #define PROG_DONE (1 << 30) 35 #define SSIC_PORT_UNUSED (1 << 31) 36 37 /* Device for a quirk */ 38 #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 39 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 40 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009 41 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 42 43 #define PCI_VENDOR_ID_ETRON 0x1b6f 44 #define PCI_DEVICE_ID_EJ168 0x7023 45 46 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 47 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 48 #define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5 49 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f 50 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f 51 #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8 52 #define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8 53 54 static const char hcd_name[] = "xhci_hcd"; 55 56 static struct hc_driver __read_mostly xhci_pci_hc_driver; 57 58 static int xhci_pci_setup(struct usb_hcd *hcd); 59 60 static const struct xhci_driver_overrides xhci_pci_overrides __initconst = { 61 .reset = xhci_pci_setup, 62 }; 63 64 /* called after powerup, by probe or system-pm "wakeup" */ 65 static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) 66 { 67 /* 68 * TODO: Implement finding debug ports later. 69 * TODO: see if there are any quirks that need to be added to handle 70 * new extended capabilities. 71 */ 72 73 /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ 74 if (!pci_set_mwi(pdev)) 75 xhci_dbg(xhci, "MWI active\n"); 76 77 xhci_dbg(xhci, "Finished xhci_pci_reinit\n"); 78 return 0; 79 } 80 81 static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) 82 { 83 struct pci_dev *pdev = to_pci_dev(dev); 84 85 /* Look for vendor-specific quirks */ 86 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && 87 (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK || 88 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) { 89 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && 90 pdev->revision == 0x0) { 91 xhci->quirks |= XHCI_RESET_EP_QUIRK; 92 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 93 "QUIRK: Fresco Logic xHC needs configure" 94 " endpoint cmd after reset endpoint"); 95 } 96 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && 97 pdev->revision == 0x4) { 98 xhci->quirks |= XHCI_SLOW_SUSPEND; 99 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 100 "QUIRK: Fresco Logic xHC revision %u" 101 "must be suspended extra slowly", 102 pdev->revision); 103 } 104 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) 105 xhci->quirks |= XHCI_BROKEN_STREAMS; 106 /* Fresco Logic confirms: all revisions of this chip do not 107 * support MSI, even though some of them claim to in their PCI 108 * capabilities. 109 */ 110 xhci->quirks |= XHCI_BROKEN_MSI; 111 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 112 "QUIRK: Fresco Logic revision %u " 113 "has broken MSI implementation", 114 pdev->revision); 115 xhci->quirks |= XHCI_TRUST_TX_LENGTH; 116 } 117 118 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && 119 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009) 120 xhci->quirks |= XHCI_BROKEN_STREAMS; 121 122 if (pdev->vendor == PCI_VENDOR_ID_NEC) 123 xhci->quirks |= XHCI_NEC_HOST; 124 125 if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) 126 xhci->quirks |= XHCI_AMD_0x96_HOST; 127 128 /* AMD PLL quirk */ 129 if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) 130 xhci->quirks |= XHCI_AMD_PLL_FIX; 131 132 if (pdev->vendor == PCI_VENDOR_ID_AMD) 133 xhci->quirks |= XHCI_TRUST_TX_LENGTH; 134 135 if (pdev->vendor == PCI_VENDOR_ID_INTEL) { 136 xhci->quirks |= XHCI_LPM_SUPPORT; 137 xhci->quirks |= XHCI_INTEL_HOST; 138 xhci->quirks |= XHCI_AVOID_BEI; 139 } 140 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 141 pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { 142 xhci->quirks |= XHCI_EP_LIMIT_QUIRK; 143 xhci->limit_active_eps = 64; 144 xhci->quirks |= XHCI_SW_BW_CHECKING; 145 /* 146 * PPT desktop boards DH77EB and DH77DF will power back on after 147 * a few seconds of being shutdown. The fix for this is to 148 * switch the ports from xHCI to EHCI on shutdown. We can't use 149 * DMI information to find those particular boards (since each 150 * vendor will change the board name), so we have to key off all 151 * PPT chipsets. 152 */ 153 xhci->quirks |= XHCI_SPURIOUS_REBOOT; 154 } 155 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 156 pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) { 157 xhci->quirks |= XHCI_SPURIOUS_REBOOT; 158 xhci->quirks |= XHCI_SPURIOUS_WAKEUP; 159 } 160 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 161 (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || 162 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || 163 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || 164 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || 165 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI)) { 166 xhci->quirks |= XHCI_PME_STUCK_QUIRK; 167 } 168 if (pdev->vendor == PCI_VENDOR_ID_INTEL && 169 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { 170 xhci->quirks |= XHCI_SSIC_PORT_UNUSED; 171 } 172 if (pdev->vendor == PCI_VENDOR_ID_ETRON && 173 pdev->device == PCI_DEVICE_ID_EJ168) { 174 xhci->quirks |= XHCI_RESET_ON_RESUME; 175 xhci->quirks |= XHCI_TRUST_TX_LENGTH; 176 xhci->quirks |= XHCI_BROKEN_STREAMS; 177 } 178 if (pdev->vendor == PCI_VENDOR_ID_RENESAS && 179 pdev->device == 0x0015) 180 xhci->quirks |= XHCI_RESET_ON_RESUME; 181 if (pdev->vendor == PCI_VENDOR_ID_VIA) 182 xhci->quirks |= XHCI_RESET_ON_RESUME; 183 184 /* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */ 185 if (pdev->vendor == PCI_VENDOR_ID_VIA && 186 pdev->device == 0x3432) 187 xhci->quirks |= XHCI_BROKEN_STREAMS; 188 189 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && 190 pdev->device == 0x1042) 191 xhci->quirks |= XHCI_BROKEN_STREAMS; 192 193 if (xhci->quirks & XHCI_RESET_ON_RESUME) 194 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 195 "QUIRK: Resetting on resume"); 196 } 197 198 #ifdef CONFIG_ACPI 199 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) 200 { 201 static const u8 intel_dsm_uuid[] = { 202 0xb7, 0x0c, 0x34, 0xac, 0x01, 0xe9, 0xbf, 0x45, 203 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23, 204 }; 205 union acpi_object *obj; 206 207 obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, 208 NULL); 209 ACPI_FREE(obj); 210 } 211 #else 212 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } 213 #endif /* CONFIG_ACPI */ 214 215 /* called during probe() after chip reset completes */ 216 static int xhci_pci_setup(struct usb_hcd *hcd) 217 { 218 struct xhci_hcd *xhci; 219 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 220 int retval; 221 222 xhci = hcd_to_xhci(hcd); 223 if (!xhci->sbrn) 224 pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); 225 226 retval = xhci_gen_setup(hcd, xhci_pci_quirks); 227 if (retval) 228 return retval; 229 230 if (!usb_hcd_is_primary_hcd(hcd)) 231 return 0; 232 233 xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); 234 235 /* Find any debug ports */ 236 retval = xhci_pci_reinit(xhci, pdev); 237 if (!retval) 238 return retval; 239 240 return retval; 241 } 242 243 /* 244 * We need to register our own PCI probe function (instead of the USB core's 245 * function) in order to create a second roothub under xHCI. 246 */ 247 static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) 248 { 249 int retval; 250 struct xhci_hcd *xhci; 251 struct hc_driver *driver; 252 struct usb_hcd *hcd; 253 254 driver = (struct hc_driver *)id->driver_data; 255 256 /* Prevent runtime suspending between USB-2 and USB-3 initialization */ 257 pm_runtime_get_noresume(&dev->dev); 258 259 /* Register the USB 2.0 roothub. 260 * FIXME: USB core must know to register the USB 2.0 roothub first. 261 * This is sort of silly, because we could just set the HCD driver flags 262 * to say USB 2.0, but I'm not sure what the implications would be in 263 * the other parts of the HCD code. 264 */ 265 retval = usb_hcd_pci_probe(dev, id); 266 267 if (retval) 268 goto put_runtime_pm; 269 270 /* USB 2.0 roothub is stored in the PCI device now. */ 271 hcd = dev_get_drvdata(&dev->dev); 272 xhci = hcd_to_xhci(hcd); 273 xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev, 274 pci_name(dev), hcd); 275 if (!xhci->shared_hcd) { 276 retval = -ENOMEM; 277 goto dealloc_usb2_hcd; 278 } 279 280 retval = usb_add_hcd(xhci->shared_hcd, dev->irq, 281 IRQF_SHARED); 282 if (retval) 283 goto put_usb3_hcd; 284 /* Roothub already marked as USB 3.0 speed */ 285 286 if (!(xhci->quirks & XHCI_BROKEN_STREAMS) && 287 HCC_MAX_PSA(xhci->hcc_params) >= 4) 288 xhci->shared_hcd->can_do_streams = 1; 289 290 if (xhci->quirks & XHCI_PME_STUCK_QUIRK) 291 xhci_pme_acpi_rtd3_enable(dev); 292 293 /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ 294 pm_runtime_put_noidle(&dev->dev); 295 296 return 0; 297 298 put_usb3_hcd: 299 usb_put_hcd(xhci->shared_hcd); 300 dealloc_usb2_hcd: 301 usb_hcd_pci_remove(dev); 302 put_runtime_pm: 303 pm_runtime_put_noidle(&dev->dev); 304 return retval; 305 } 306 307 static void xhci_pci_remove(struct pci_dev *dev) 308 { 309 struct xhci_hcd *xhci; 310 311 xhci = hcd_to_xhci(pci_get_drvdata(dev)); 312 xhci->xhc_state |= XHCI_STATE_REMOVING; 313 if (xhci->shared_hcd) { 314 usb_remove_hcd(xhci->shared_hcd); 315 usb_put_hcd(xhci->shared_hcd); 316 } 317 usb_hcd_pci_remove(dev); 318 319 /* Workaround for spurious wakeups at shutdown with HSW */ 320 if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) 321 pci_set_power_state(dev, PCI_D3hot); 322 } 323 324 #ifdef CONFIG_PM 325 /* 326 * In some Intel xHCI controllers, in order to get D3 working, 327 * through a vendor specific SSIC CONFIG register at offset 0x883c, 328 * SSIC PORT need to be marked as "unused" before putting xHCI 329 * into D3. After D3 exit, the SSIC port need to be marked as "used". 330 * Without this change, xHCI might not enter D3 state. 331 */ 332 static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend) 333 { 334 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 335 u32 val; 336 void __iomem *reg; 337 int i; 338 339 for (i = 0; i < SSIC_PORT_NUM; i++) { 340 reg = (void __iomem *) xhci->cap_regs + 341 SSIC_PORT_CFG2 + 342 i * SSIC_PORT_CFG2_OFFSET; 343 344 /* Notify SSIC that SSIC profile programming is not done. */ 345 val = readl(reg) & ~PROG_DONE; 346 writel(val, reg); 347 348 /* Mark SSIC port as unused(suspend) or used(resume) */ 349 val = readl(reg); 350 if (suspend) 351 val |= SSIC_PORT_UNUSED; 352 else 353 val &= ~SSIC_PORT_UNUSED; 354 writel(val, reg); 355 356 /* Notify SSIC that SSIC profile programming is done */ 357 val = readl(reg) | PROG_DONE; 358 writel(val, reg); 359 readl(reg); 360 } 361 } 362 363 /* 364 * Make sure PME works on some Intel xHCI controllers by writing 1 to clear 365 * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 366 */ 367 static void xhci_pme_quirk(struct usb_hcd *hcd) 368 { 369 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 370 void __iomem *reg; 371 u32 val; 372 373 reg = (void __iomem *) xhci->cap_regs + 0x80a4; 374 val = readl(reg); 375 writel(val | BIT(28), reg); 376 readl(reg); 377 } 378 379 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) 380 { 381 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 382 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 383 int ret; 384 385 /* 386 * Systems with the TI redriver that loses port status change events 387 * need to have the registers polled during D3, so avoid D3cold. 388 */ 389 if (xhci->quirks & XHCI_COMP_MODE_QUIRK) 390 pdev->no_d3cold = true; 391 392 if (xhci->quirks & XHCI_PME_STUCK_QUIRK) 393 xhci_pme_quirk(hcd); 394 395 if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) 396 xhci_ssic_port_unused_quirk(hcd, true); 397 398 ret = xhci_suspend(xhci, do_wakeup); 399 if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED)) 400 xhci_ssic_port_unused_quirk(hcd, false); 401 402 return ret; 403 } 404 405 static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) 406 { 407 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 408 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 409 int retval = 0; 410 411 /* The BIOS on systems with the Intel Panther Point chipset may or may 412 * not support xHCI natively. That means that during system resume, it 413 * may switch the ports back to EHCI so that users can use their 414 * keyboard to select a kernel from GRUB after resume from hibernate. 415 * 416 * The BIOS is supposed to remember whether the OS had xHCI ports 417 * enabled before resume, and switch the ports back to xHCI when the 418 * BIOS/OS semaphore is written, but we all know we can't trust BIOS 419 * writers. 420 * 421 * Unconditionally switch the ports back to xHCI after a system resume. 422 * It should not matter whether the EHCI or xHCI controller is 423 * resumed first. It's enough to do the switchover in xHCI because 424 * USB core won't notice anything as the hub driver doesn't start 425 * running again until after all the devices (including both EHCI and 426 * xHCI host controllers) have been resumed. 427 */ 428 429 if (pdev->vendor == PCI_VENDOR_ID_INTEL) 430 usb_enable_intel_xhci_ports(pdev); 431 432 if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) 433 xhci_ssic_port_unused_quirk(hcd, false); 434 435 if (xhci->quirks & XHCI_PME_STUCK_QUIRK) 436 xhci_pme_quirk(hcd); 437 438 retval = xhci_resume(xhci, hibernated); 439 return retval; 440 } 441 #endif /* CONFIG_PM */ 442 443 /*-------------------------------------------------------------------------*/ 444 445 /* PCI driver selection metadata; PCI hotplugging uses this */ 446 static const struct pci_device_id pci_ids[] = { { 447 /* handle any USB 3.0 xHCI controller */ 448 PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0), 449 .driver_data = (unsigned long) &xhci_pci_hc_driver, 450 }, 451 { /* end: all zeroes */ } 452 }; 453 MODULE_DEVICE_TABLE(pci, pci_ids); 454 455 /* pci driver glue; this is a "new style" PCI driver module */ 456 static struct pci_driver xhci_pci_driver = { 457 .name = (char *) hcd_name, 458 .id_table = pci_ids, 459 460 .probe = xhci_pci_probe, 461 .remove = xhci_pci_remove, 462 /* suspend and resume implemented later */ 463 464 .shutdown = usb_hcd_pci_shutdown, 465 #ifdef CONFIG_PM 466 .driver = { 467 .pm = &usb_hcd_pci_pm_ops 468 }, 469 #endif 470 }; 471 472 static int __init xhci_pci_init(void) 473 { 474 xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides); 475 #ifdef CONFIG_PM 476 xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend; 477 xhci_pci_hc_driver.pci_resume = xhci_pci_resume; 478 #endif 479 return pci_register_driver(&xhci_pci_driver); 480 } 481 module_init(xhci_pci_init); 482 483 static void __exit xhci_pci_exit(void) 484 { 485 pci_unregister_driver(&xhci_pci_driver); 486 } 487 module_exit(xhci_pci_exit); 488 489 MODULE_DESCRIPTION("xHCI PCI Host Controller Driver"); 490 MODULE_LICENSE("GPL"); 491