1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (c) 2015 MediaTek Inc. 4 * Author: 5 * Zhigang.Wei <zhigang.wei@mediatek.com> 6 * Chunfeng.Yun <chunfeng.yun@mediatek.com> 7 */ 8 9 #ifndef _XHCI_MTK_H_ 10 #define _XHCI_MTK_H_ 11 12 #include "xhci.h" 13 14 /** 15 * To simplify scheduler algorithm, set a upper limit for ESIT, 16 * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT, 17 * round down to the limit value, that means allocating more 18 * bandwidth to it. 19 */ 20 #define XHCI_MTK_MAX_ESIT 64 21 22 /** 23 * struct mu3h_sch_bw_info: schedule information for bandwidth domain 24 * 25 * @bus_bw: array to keep track of bandwidth already used at each uframes 26 * @bw_ep_list: eps in the bandwidth domain 27 * 28 * treat a HS root port as a bandwidth domain, but treat a SS root port as 29 * two bandwidth domains, one for IN eps and another for OUT eps. 30 */ 31 struct mu3h_sch_bw_info { 32 u32 bus_bw[XHCI_MTK_MAX_ESIT]; 33 struct list_head bw_ep_list; 34 }; 35 36 /** 37 * struct mu3h_sch_ep_info: schedule information for endpoint 38 * 39 * @esit: unit is 125us, equal to 2 << Interval field in ep-context 40 * @num_budget_microframes: number of continuous uframes 41 * (@repeat==1) scheduled within the interval 42 * @bw_cost_per_microframe: bandwidth cost per microframe 43 * @endpoint: linked into bandwidth domain which it belongs to 44 * @ep: address of usb_host_endpoint struct 45 * @offset: which uframe of the interval that transfer should be 46 * scheduled first time within the interval 47 * @repeat: the time gap between two uframes that transfers are 48 * scheduled within a interval. in the simple algorithm, only 49 * assign 0 or 1 to it; 0 means using only one uframe in a 50 * interval, and 1 means using @num_budget_microframes 51 * continuous uframes 52 * @pkts: number of packets to be transferred in the scheduled uframes 53 * @cs_count: number of CS that host will trigger 54 * @burst_mode: burst mode for scheduling. 0: normal burst mode, 55 * distribute the bMaxBurst+1 packets for a single burst 56 * according to @pkts and @repeat, repeate the burst multiple 57 * times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets 58 * according to @pkts and @repeat. normal mode is used by 59 * default 60 */ 61 struct mu3h_sch_ep_info { 62 u32 esit; 63 u32 num_budget_microframes; 64 u32 bw_cost_per_microframe; 65 struct list_head endpoint; 66 void *ep; 67 /* 68 * mtk xHCI scheduling information put into reserved DWs 69 * in ep context 70 */ 71 u32 offset; 72 u32 repeat; 73 u32 pkts; 74 u32 cs_count; 75 u32 burst_mode; 76 }; 77 78 #define MU3C_U3_PORT_MAX 4 79 #define MU3C_U2_PORT_MAX 5 80 81 /** 82 * struct mu3c_ippc_regs: MTK ssusb ip port control registers 83 * @ip_pw_ctr0~3: ip power and clock control registers 84 * @ip_pw_sts1~2: ip power and clock status registers 85 * @ip_xhci_cap: ip xHCI capability register 86 * @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used 87 * @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used 88 * @u2_phy_pll: usb2 phy pll control register 89 */ 90 struct mu3c_ippc_regs { 91 __le32 ip_pw_ctr0; 92 __le32 ip_pw_ctr1; 93 __le32 ip_pw_ctr2; 94 __le32 ip_pw_ctr3; 95 __le32 ip_pw_sts1; 96 __le32 ip_pw_sts2; 97 __le32 reserved0[3]; 98 __le32 ip_xhci_cap; 99 __le32 reserved1[2]; 100 __le64 u3_ctrl_p[MU3C_U3_PORT_MAX]; 101 __le64 u2_ctrl_p[MU3C_U2_PORT_MAX]; 102 __le32 reserved2; 103 __le32 u2_phy_pll; 104 __le32 reserved3[33]; /* 0x80 ~ 0xff */ 105 }; 106 107 struct xhci_hcd_mtk { 108 struct device *dev; 109 struct usb_hcd *hcd; 110 struct mu3h_sch_bw_info *sch_array; 111 struct mu3c_ippc_regs __iomem *ippc_regs; 112 bool has_ippc; 113 int num_u2_ports; 114 int num_u3_ports; 115 int u3p_dis_msk; 116 struct regulator *vusb33; 117 struct regulator *vbus; 118 struct clk *sys_clk; /* sys and mac clock */ 119 struct clk *ref_clk; 120 struct clk *mcu_clk; 121 struct clk *dma_clk; 122 struct regmap *pericfg; 123 struct phy **phys; 124 int num_phys; 125 bool lpm_support; 126 /* usb remote wakeup */ 127 bool uwk_en; 128 struct regmap *uwk; 129 u32 uwk_reg_base; 130 u32 uwk_vers; 131 }; 132 133 static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd) 134 { 135 return dev_get_drvdata(hcd->self.controller); 136 } 137 138 #if IS_ENABLED(CONFIG_USB_XHCI_MTK) 139 int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk); 140 void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk); 141 int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, 142 struct usb_host_endpoint *ep); 143 void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, 144 struct usb_host_endpoint *ep); 145 146 #else 147 static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, 148 struct usb_device *udev, struct usb_host_endpoint *ep) 149 { 150 return 0; 151 } 152 153 static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, 154 struct usb_device *udev, struct usb_host_endpoint *ep) 155 { 156 } 157 158 #endif 159 160 #endif /* _XHCI_MTK_H_ */ 161