1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Copyright (c) 2015 MediaTek Inc. 4 * Author: 5 * Zhigang.Wei <zhigang.wei@mediatek.com> 6 * Chunfeng.Yun <chunfeng.yun@mediatek.com> 7 */ 8 9 #ifndef _XHCI_MTK_H_ 10 #define _XHCI_MTK_H_ 11 12 #include <linux/clk.h> 13 #include <linux/hashtable.h> 14 #include <linux/regulator/consumer.h> 15 16 #include "xhci.h" 17 18 #define BULK_CLKS_NUM 5 19 #define BULK_VREGS_NUM 2 20 21 /* support at most 64 ep, use 32 size hash table */ 22 #define SCH_EP_HASH_BITS 5 23 24 /** 25 * To simplify scheduler algorithm, set a upper limit for ESIT, 26 * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT, 27 * round down to the limit value, that means allocating more 28 * bandwidth to it. 29 */ 30 #define XHCI_MTK_MAX_ESIT (1 << 6) 31 #define XHCI_MTK_BW_INDEX(x) ((x) & (XHCI_MTK_MAX_ESIT - 1)) 32 33 /** 34 * @fs_bus_bw: array to keep track of bandwidth already used for FS 35 * @ep_list: Endpoints using this TT 36 */ 37 struct mu3h_sch_tt { 38 u32 fs_bus_bw[XHCI_MTK_MAX_ESIT]; 39 struct list_head ep_list; 40 }; 41 42 /** 43 * struct mu3h_sch_bw_info: schedule information for bandwidth domain 44 * 45 * @bus_bw: array to keep track of bandwidth already used at each uframes 46 * 47 * treat a HS root port as a bandwidth domain, but treat a SS root port as 48 * two bandwidth domains, one for IN eps and another for OUT eps. 49 */ 50 struct mu3h_sch_bw_info { 51 u32 bus_bw[XHCI_MTK_MAX_ESIT]; 52 }; 53 54 /** 55 * struct mu3h_sch_ep_info: schedule information for endpoint 56 * 57 * @esit: unit is 125us, equal to 2 << Interval field in ep-context 58 * @num_esit: number of @esit in a period 59 * @num_budget_microframes: number of continuous uframes 60 * (@repeat==1) scheduled within the interval 61 * @bw_cost_per_microframe: bandwidth cost per microframe 62 * @hentry: hash table entry 63 * @endpoint: linked into bandwidth domain which it belongs to 64 * @tt_endpoint: linked into mu3h_sch_tt's list which it belongs to 65 * @bw_info: bandwidth domain which this endpoint belongs 66 * @sch_tt: mu3h_sch_tt linked into 67 * @ep_type: endpoint type 68 * @maxpkt: max packet size of endpoint 69 * @ep: address of usb_host_endpoint struct 70 * @allocated: the bandwidth is aready allocated from bus_bw 71 * @offset: which uframe of the interval that transfer should be 72 * scheduled first time within the interval 73 * @repeat: the time gap between two uframes that transfers are 74 * scheduled within a interval. in the simple algorithm, only 75 * assign 0 or 1 to it; 0 means using only one uframe in a 76 * interval, and 1 means using @num_budget_microframes 77 * continuous uframes 78 * @pkts: number of packets to be transferred in the scheduled uframes 79 * @cs_count: number of CS that host will trigger 80 * @burst_mode: burst mode for scheduling. 0: normal burst mode, 81 * distribute the bMaxBurst+1 packets for a single burst 82 * according to @pkts and @repeat, repeate the burst multiple 83 * times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets 84 * according to @pkts and @repeat. normal mode is used by 85 * default 86 * @bw_budget_table: table to record bandwidth budget per microframe 87 */ 88 struct mu3h_sch_ep_info { 89 u32 esit; 90 u32 num_esit; 91 u32 num_budget_microframes; 92 u32 bw_cost_per_microframe; 93 struct list_head endpoint; 94 struct hlist_node hentry; 95 struct list_head tt_endpoint; 96 struct mu3h_sch_bw_info *bw_info; 97 struct mu3h_sch_tt *sch_tt; 98 u32 ep_type; 99 u32 maxpkt; 100 struct usb_host_endpoint *ep; 101 enum usb_device_speed speed; 102 bool allocated; 103 /* 104 * mtk xHCI scheduling information put into reserved DWs 105 * in ep context 106 */ 107 u32 offset; 108 u32 repeat; 109 u32 pkts; 110 u32 cs_count; 111 u32 burst_mode; 112 u32 bw_budget_table[]; 113 }; 114 115 #define MU3C_U3_PORT_MAX 4 116 #define MU3C_U2_PORT_MAX 5 117 118 /** 119 * struct mu3c_ippc_regs: MTK ssusb ip port control registers 120 * @ip_pw_ctr0~3: ip power and clock control registers 121 * @ip_pw_sts1~2: ip power and clock status registers 122 * @ip_xhci_cap: ip xHCI capability register 123 * @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used 124 * @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used 125 * @u2_phy_pll: usb2 phy pll control register 126 */ 127 struct mu3c_ippc_regs { 128 __le32 ip_pw_ctr0; 129 __le32 ip_pw_ctr1; 130 __le32 ip_pw_ctr2; 131 __le32 ip_pw_ctr3; 132 __le32 ip_pw_sts1; 133 __le32 ip_pw_sts2; 134 __le32 reserved0[3]; 135 __le32 ip_xhci_cap; 136 __le32 reserved1[2]; 137 __le64 u3_ctrl_p[MU3C_U3_PORT_MAX]; 138 __le64 u2_ctrl_p[MU3C_U2_PORT_MAX]; 139 __le32 reserved2; 140 __le32 u2_phy_pll; 141 __le32 reserved3[33]; /* 0x80 ~ 0xff */ 142 }; 143 144 struct xhci_hcd_mtk { 145 struct device *dev; 146 struct usb_hcd *hcd; 147 struct mu3h_sch_bw_info *sch_array; 148 struct list_head bw_ep_chk_list; 149 DECLARE_HASHTABLE(sch_ep_hash, SCH_EP_HASH_BITS); 150 struct mu3c_ippc_regs __iomem *ippc_regs; 151 int num_u2_ports; 152 int num_u3_ports; 153 int u2p_dis_msk; 154 int u3p_dis_msk; 155 struct clk_bulk_data clks[BULK_CLKS_NUM]; 156 struct regulator_bulk_data supplies[BULK_VREGS_NUM]; 157 unsigned int has_ippc:1; 158 unsigned int lpm_support:1; 159 unsigned int u2_lpm_disable:1; 160 /* usb remote wakeup */ 161 unsigned int uwk_en:1; 162 struct regmap *uwk; 163 u32 uwk_reg_base; 164 u32 uwk_vers; 165 }; 166 167 static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd) 168 { 169 return dev_get_drvdata(hcd->self.controller); 170 } 171 172 int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk); 173 void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk); 174 int xhci_mtk_add_ep(struct usb_hcd *hcd, struct usb_device *udev, 175 struct usb_host_endpoint *ep); 176 int xhci_mtk_drop_ep(struct usb_hcd *hcd, struct usb_device *udev, 177 struct usb_host_endpoint *ep); 178 int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); 179 void xhci_mtk_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); 180 181 #endif /* _XHCI_MTK_H_ */ 182