1 /* 2 * xHCI host controller driver 3 * 4 * Copyright (C) 2008 Intel Corp. 5 * 6 * Author: Sarah Sharp 7 * Some code borrowed from the Linux EHCI driver. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 16 * for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software Foundation, 20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 */ 22 /* Up to 16 ms to halt an HC */ 23 #define XHCI_MAX_HALT_USEC (16*1000) 24 /* HC not running - set to 1 when run/stop bit is cleared. */ 25 #define XHCI_STS_HALT (1<<0) 26 27 /* HCCPARAMS offset from PCI base address */ 28 #define XHCI_HCC_PARAMS_OFFSET 0x10 29 /* HCCPARAMS contains the first extended capability pointer */ 30 #define XHCI_HCC_EXT_CAPS(p) (((p)>>16)&0xffff) 31 32 /* Command and Status registers offset from the Operational Registers address */ 33 #define XHCI_CMD_OFFSET 0x00 34 #define XHCI_STS_OFFSET 0x04 35 36 #define XHCI_MAX_EXT_CAPS 50 37 38 /* Capability Register */ 39 /* bits 7:0 - how long is the Capabilities register */ 40 #define XHCI_HC_LENGTH(p) (((p)>>00)&0x00ff) 41 42 /* Extended capability register fields */ 43 #define XHCI_EXT_CAPS_ID(p) (((p)>>0)&0xff) 44 #define XHCI_EXT_CAPS_NEXT(p) (((p)>>8)&0xff) 45 #define XHCI_EXT_CAPS_VAL(p) ((p)>>16) 46 /* Extended capability IDs - ID 0 reserved */ 47 #define XHCI_EXT_CAPS_LEGACY 1 48 #define XHCI_EXT_CAPS_PROTOCOL 2 49 #define XHCI_EXT_CAPS_PM 3 50 #define XHCI_EXT_CAPS_VIRT 4 51 #define XHCI_EXT_CAPS_ROUTE 5 52 /* IDs 6-9 reserved */ 53 #define XHCI_EXT_CAPS_DEBUG 10 54 /* USB Legacy Support Capability - section 7.1.1 */ 55 #define XHCI_HC_BIOS_OWNED (1 << 16) 56 #define XHCI_HC_OS_OWNED (1 << 24) 57 58 /* USB Legacy Support Capability - section 7.1.1 */ 59 /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ 60 #define XHCI_LEGACY_SUPPORT_OFFSET (0x00) 61 62 /* USB Legacy Support Control and Status Register - section 7.1.2 */ 63 /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ 64 #define XHCI_LEGACY_CONTROL_OFFSET (0x04) 65 /* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ 66 #define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17)) 67 #define XHCI_LEGACY_SMI_EVENTS (0x7 << 29) 68 69 /* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */ 70 #define XHCI_L1C (1 << 16) 71 72 /* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */ 73 #define XHCI_HLC (1 << 19) 74 75 /* command register values to disable interrupts and halt the HC */ 76 /* start/stop HC execution - do not write unless HC is halted*/ 77 #define XHCI_CMD_RUN (1 << 0) 78 /* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */ 79 #define XHCI_CMD_EIE (1 << 2) 80 /* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */ 81 #define XHCI_CMD_HSEIE (1 << 3) 82 /* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */ 83 #define XHCI_CMD_EWE (1 << 10) 84 85 #define XHCI_IRQS (XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE) 86 87 /* true: Controller Not Ready to accept doorbell or op reg writes after reset */ 88 #define XHCI_STS_CNR (1 << 11) 89 90 #include <linux/io.h> 91 92 /** 93 * Return the next extended capability pointer register. 94 * 95 * @base PCI register base address. 96 * 97 * @ext_offset Offset of the 32-bit register that contains the extended 98 * capabilites pointer. If searching for the first extended capability, pass 99 * in XHCI_HCC_PARAMS_OFFSET. If searching for the next extended capability, 100 * pass in the offset of the current extended capability register. 101 * 102 * Returns 0 if there is no next extended capability register or returns the register offset 103 * from the PCI registers base address. 104 */ 105 static inline int xhci_find_next_cap_offset(void __iomem *base, int ext_offset) 106 { 107 u32 next; 108 109 next = readl(base + ext_offset); 110 111 if (ext_offset == XHCI_HCC_PARAMS_OFFSET) { 112 /* Find the first extended capability */ 113 next = XHCI_HCC_EXT_CAPS(next); 114 ext_offset = 0; 115 } else { 116 /* Find the next extended capability */ 117 next = XHCI_EXT_CAPS_NEXT(next); 118 } 119 120 if (!next) 121 return 0; 122 /* 123 * Address calculation from offset of extended capabilities 124 * (or HCCPARAMS) register - see section 5.3.6 and section 7. 125 */ 126 return ext_offset + (next << 2); 127 } 128 129 /** 130 * Find the offset of the extended capabilities with capability ID id. 131 * 132 * @base PCI MMIO registers base address. 133 * @ext_offset Offset from base of the first extended capability to look at, 134 * or the address of HCCPARAMS. 135 * @id Extended capability ID to search for. 136 * 137 * This uses an arbitrary limit of XHCI_MAX_EXT_CAPS extended capabilities 138 * to make sure that the list doesn't contain a loop. 139 */ 140 static inline int xhci_find_ext_cap_by_id(void __iomem *base, int ext_offset, int id) 141 { 142 u32 val; 143 int limit = XHCI_MAX_EXT_CAPS; 144 145 while (ext_offset && limit > 0) { 146 val = readl(base + ext_offset); 147 if (XHCI_EXT_CAPS_ID(val) == id) 148 break; 149 ext_offset = xhci_find_next_cap_offset(base, ext_offset); 150 limit--; 151 } 152 if (limit > 0) 153 return ext_offset; 154 return 0; 155 } 156