xref: /openbmc/linux/drivers/usb/host/uhci-platform.c (revision 7aacf86b)
1 /*
2  * Generic UHCI HCD (Host Controller Driver) for Platform Devices
3  *
4  * Copyright (c) 2011 Tony Prisk <linux@prisktech.co.nz>
5  *
6  * This file is based on uhci-grlib.c
7  * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
8  */
9 
10 #include <linux/of.h>
11 #include <linux/device.h>
12 #include <linux/platform_device.h>
13 
14 static int uhci_platform_init(struct usb_hcd *hcd)
15 {
16 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
17 
18 	/* Probe number of ports if not already provided by DT */
19 	if (!uhci->rh_numports)
20 		uhci->rh_numports = uhci_count_ports(hcd);
21 
22 	/* Set up pointers to to generic functions */
23 	uhci->reset_hc = uhci_generic_reset_hc;
24 	uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc;
25 
26 	/* No special actions need to be taken for the functions below */
27 	uhci->configure_hc = NULL;
28 	uhci->resume_detect_interrupts_are_broken = NULL;
29 	uhci->global_suspend_mode_is_broken = NULL;
30 
31 	/* Reset if the controller isn't already safely quiescent. */
32 	check_and_reset_hc(uhci);
33 	return 0;
34 }
35 
36 static const struct hc_driver uhci_platform_hc_driver = {
37 	.description =		hcd_name,
38 	.product_desc =		"Generic UHCI Host Controller",
39 	.hcd_priv_size =	sizeof(struct uhci_hcd),
40 
41 	/* Generic hardware linkage */
42 	.irq =			uhci_irq,
43 	.flags =		HCD_MEMORY | HCD_USB11,
44 
45 	/* Basic lifecycle operations */
46 	.reset =		uhci_platform_init,
47 	.start =		uhci_start,
48 #ifdef CONFIG_PM
49 	.pci_suspend =		NULL,
50 	.pci_resume =		NULL,
51 	.bus_suspend =		uhci_rh_suspend,
52 	.bus_resume =		uhci_rh_resume,
53 #endif
54 	.stop =			uhci_stop,
55 
56 	.urb_enqueue =		uhci_urb_enqueue,
57 	.urb_dequeue =		uhci_urb_dequeue,
58 
59 	.endpoint_disable =	uhci_hcd_endpoint_disable,
60 	.get_frame_number =	uhci_hcd_get_frame_number,
61 
62 	.hub_status_data =	uhci_hub_status_data,
63 	.hub_control =		uhci_hub_control,
64 };
65 
66 static int uhci_hcd_platform_probe(struct platform_device *pdev)
67 {
68 	struct device_node *np = pdev->dev.of_node;
69 	struct usb_hcd *hcd;
70 	struct uhci_hcd	*uhci;
71 	struct resource *res;
72 	int ret;
73 
74 	if (usb_disabled())
75 		return -ENODEV;
76 
77 	/*
78 	 * Right now device-tree probed devices don't get dma_mask set.
79 	 * Since shared usb code relies on it, set it here for now.
80 	 * Once we have dma capability bindings this can go away.
81 	 */
82 	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
83 	if (ret)
84 		return ret;
85 
86 	hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
87 			pdev->name);
88 	if (!hcd)
89 		return -ENOMEM;
90 
91 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
92 	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
93 	if (IS_ERR(hcd->regs)) {
94 		ret = PTR_ERR(hcd->regs);
95 		goto err_rmr;
96 	}
97 	hcd->rsrc_start = res->start;
98 	hcd->rsrc_len = resource_size(res);
99 
100 	uhci = hcd_to_uhci(hcd);
101 
102 	uhci->regs = hcd->regs;
103 
104 	/* Grab some things from the device-tree */
105 	if (np) {
106 		u32 num_ports;
107 
108 		if (of_property_read_u32(np, "#ports", &num_ports) == 0) {
109 			uhci->rh_numports = num_ports;
110 			dev_info(&pdev->dev,
111 				"Detected %d ports from device-tree\n",
112 				num_ports);
113 		}
114 		if (of_device_is_compatible(np, "aspeed,ast2400-uhci") ||
115 		    of_device_is_compatible(np, "aspeed,ast2500-uhci")) {
116 			uhci->is_aspeed = 1;
117 			dev_info(&pdev->dev,
118 				 "Enabled Aspeed implementation workarounds\n");
119 		}
120 	}
121 	ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
122 	if (ret)
123 		goto err_rmr;
124 
125 	device_wakeup_enable(hcd->self.controller);
126 	return 0;
127 
128 err_rmr:
129 	usb_put_hcd(hcd);
130 
131 	return ret;
132 }
133 
134 static int uhci_hcd_platform_remove(struct platform_device *pdev)
135 {
136 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
137 
138 	usb_remove_hcd(hcd);
139 	usb_put_hcd(hcd);
140 
141 	return 0;
142 }
143 
144 /* Make sure the controller is quiescent and that we're not using it
145  * any more.  This is mainly for the benefit of programs which, like kexec,
146  * expect the hardware to be idle: not doing DMA or generating IRQs.
147  *
148  * This routine may be called in a damaged or failing kernel.  Hence we
149  * do not acquire the spinlock before shutting down the controller.
150  */
151 static void uhci_hcd_platform_shutdown(struct platform_device *op)
152 {
153 	struct usb_hcd *hcd = platform_get_drvdata(op);
154 
155 	uhci_hc_died(hcd_to_uhci(hcd));
156 }
157 
158 static const struct of_device_id platform_uhci_ids[] = {
159 	{ .compatible = "generic-uhci", },
160 	{ .compatible = "platform-uhci", },
161 	{}
162 };
163 MODULE_DEVICE_TABLE(of, platform_uhci_ids);
164 
165 static struct platform_driver uhci_platform_driver = {
166 	.probe		= uhci_hcd_platform_probe,
167 	.remove		= uhci_hcd_platform_remove,
168 	.shutdown	= uhci_hcd_platform_shutdown,
169 	.driver = {
170 		.name = "platform-uhci",
171 		.of_match_table = platform_uhci_ids,
172 	},
173 };
174