1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * UHCI HCD (Host Controller Driver) for GRLIB GRUSBHC 4 * 5 * Copyright (c) 2011 Jan Andersson <jan@gaisler.com> 6 * 7 * This file is based on UHCI PCI HCD: 8 * (C) Copyright 1999 Linus Torvalds 9 * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com 10 * (C) Copyright 1999 Randy Dunlap 11 * (C) Copyright 1999 Georg Acher, acher@in.tum.de 12 * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de 13 * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch 14 * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at 15 * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface 16 * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com). 17 * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c) 18 * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu 19 */ 20 21 #include <linux/device.h> 22 #include <linux/of_irq.h> 23 #include <linux/of_address.h> 24 #include <linux/of_platform.h> 25 26 static int uhci_grlib_init(struct usb_hcd *hcd) 27 { 28 struct uhci_hcd *uhci = hcd_to_uhci(hcd); 29 30 /* 31 * Probe to determine the endianness of the controller. 32 * We know that bit 7 of the PORTSC1 register is always set 33 * and bit 15 is always clear. If uhci_readw() yields a value 34 * with bit 7 (0x80) turned on then the current little-endian 35 * setting is correct. Otherwise we assume the value was 36 * byte-swapped; hence the register interface and presumably 37 * also the descriptors are big-endian. 38 */ 39 if (!(uhci_readw(uhci, USBPORTSC1) & 0x80)) { 40 uhci->big_endian_mmio = 1; 41 uhci->big_endian_desc = 1; 42 } 43 44 uhci->rh_numports = uhci_count_ports(hcd); 45 46 /* Set up pointers to generic functions */ 47 uhci->reset_hc = uhci_generic_reset_hc; 48 uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc; 49 /* No special actions need to be taken for the functions below */ 50 uhci->configure_hc = NULL; 51 uhci->resume_detect_interrupts_are_broken = NULL; 52 uhci->global_suspend_mode_is_broken = NULL; 53 54 /* Reset if the controller isn't already safely quiescent. */ 55 check_and_reset_hc(uhci); 56 return 0; 57 } 58 59 static const struct hc_driver uhci_grlib_hc_driver = { 60 .description = hcd_name, 61 .product_desc = "GRLIB GRUSBHC UHCI Host Controller", 62 .hcd_priv_size = sizeof(struct uhci_hcd), 63 64 /* Generic hardware linkage */ 65 .irq = uhci_irq, 66 .flags = HCD_MEMORY | HCD_DMA | HCD_USB11, 67 68 /* Basic lifecycle operations */ 69 .reset = uhci_grlib_init, 70 .start = uhci_start, 71 #ifdef CONFIG_PM 72 .pci_suspend = NULL, 73 .pci_resume = NULL, 74 .bus_suspend = uhci_rh_suspend, 75 .bus_resume = uhci_rh_resume, 76 #endif 77 .stop = uhci_stop, 78 79 .urb_enqueue = uhci_urb_enqueue, 80 .urb_dequeue = uhci_urb_dequeue, 81 82 .endpoint_disable = uhci_hcd_endpoint_disable, 83 .get_frame_number = uhci_hcd_get_frame_number, 84 85 .hub_status_data = uhci_hub_status_data, 86 .hub_control = uhci_hub_control, 87 }; 88 89 90 static int uhci_hcd_grlib_probe(struct platform_device *op) 91 { 92 struct device_node *dn = op->dev.of_node; 93 struct usb_hcd *hcd; 94 struct uhci_hcd *uhci = NULL; 95 struct resource res; 96 int irq; 97 int rv; 98 99 if (usb_disabled()) 100 return -ENODEV; 101 102 dev_dbg(&op->dev, "initializing GRUSBHC UHCI USB Controller\n"); 103 104 rv = of_address_to_resource(dn, 0, &res); 105 if (rv) 106 return rv; 107 108 /* usb_create_hcd requires dma_mask != NULL */ 109 op->dev.dma_mask = &op->dev.coherent_dma_mask; 110 hcd = usb_create_hcd(&uhci_grlib_hc_driver, &op->dev, 111 "GRUSBHC UHCI USB"); 112 if (!hcd) 113 return -ENOMEM; 114 115 hcd->rsrc_start = res.start; 116 hcd->rsrc_len = resource_size(&res); 117 118 irq = irq_of_parse_and_map(dn, 0); 119 if (irq == NO_IRQ) { 120 printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); 121 rv = -EBUSY; 122 goto err_usb; 123 } 124 125 hcd->regs = devm_ioremap_resource(&op->dev, &res); 126 if (IS_ERR(hcd->regs)) { 127 rv = PTR_ERR(hcd->regs); 128 goto err_irq; 129 } 130 131 uhci = hcd_to_uhci(hcd); 132 133 uhci->regs = hcd->regs; 134 135 rv = usb_add_hcd(hcd, irq, 0); 136 if (rv) 137 goto err_irq; 138 139 device_wakeup_enable(hcd->self.controller); 140 return 0; 141 142 err_irq: 143 irq_dispose_mapping(irq); 144 err_usb: 145 usb_put_hcd(hcd); 146 147 return rv; 148 } 149 150 static int uhci_hcd_grlib_remove(struct platform_device *op) 151 { 152 struct usb_hcd *hcd = platform_get_drvdata(op); 153 154 dev_dbg(&op->dev, "stopping GRLIB GRUSBHC UHCI USB Controller\n"); 155 156 usb_remove_hcd(hcd); 157 158 irq_dispose_mapping(hcd->irq); 159 usb_put_hcd(hcd); 160 161 return 0; 162 } 163 164 /* Make sure the controller is quiescent and that we're not using it 165 * any more. This is mainly for the benefit of programs which, like kexec, 166 * expect the hardware to be idle: not doing DMA or generating IRQs. 167 * 168 * This routine may be called in a damaged or failing kernel. Hence we 169 * do not acquire the spinlock before shutting down the controller. 170 */ 171 static void uhci_hcd_grlib_shutdown(struct platform_device *op) 172 { 173 struct usb_hcd *hcd = platform_get_drvdata(op); 174 175 uhci_hc_died(hcd_to_uhci(hcd)); 176 } 177 178 static const struct of_device_id uhci_hcd_grlib_of_match[] = { 179 { .name = "GAISLER_UHCI", }, 180 { .name = "01_027", }, 181 {}, 182 }; 183 MODULE_DEVICE_TABLE(of, uhci_hcd_grlib_of_match); 184 185 186 static struct platform_driver uhci_grlib_driver = { 187 .probe = uhci_hcd_grlib_probe, 188 .remove = uhci_hcd_grlib_remove, 189 .shutdown = uhci_hcd_grlib_shutdown, 190 .driver = { 191 .name = "grlib-uhci", 192 .of_match_table = uhci_hcd_grlib_of_match, 193 }, 194 }; 195