1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Sonics Silicon Backplane 4 * Broadcom USB-core driver (SSB bus glue) 5 * 6 * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de> 7 * 8 * Based on ssb-ohci driver 9 * Copyright 2007 Michael Buesch <m@bues.ch> 10 * 11 * Derived from the OHCI-PCI driver 12 * Copyright 1999 Roman Weissgaerber 13 * Copyright 2000-2002 David Brownell 14 * Copyright 1999 Linus Torvalds 15 * Copyright 1999 Gregory P. Smith 16 * 17 * Derived from the USBcore related parts of Broadcom-SB 18 * Copyright 2005-2011 Broadcom Corporation 19 */ 20 #include <linux/ssb/ssb.h> 21 #include <linux/delay.h> 22 #include <linux/platform_device.h> 23 #include <linux/module.h> 24 #include <linux/slab.h> 25 #include <linux/usb/ehci_pdriver.h> 26 #include <linux/usb/ohci_pdriver.h> 27 28 MODULE_AUTHOR("Hauke Mehrtens"); 29 MODULE_DESCRIPTION("Common USB driver for SSB Bus"); 30 MODULE_LICENSE("GPL"); 31 32 #define SSB_HCD_TMSLOW_HOSTMODE (1 << 29) 33 34 struct ssb_hcd_device { 35 struct platform_device *ehci_dev; 36 struct platform_device *ohci_dev; 37 38 u32 enable_flags; 39 }; 40 41 static void ssb_hcd_5354wa(struct ssb_device *dev) 42 { 43 #ifdef CONFIG_SSB_DRIVER_MIPS 44 /* Work around for 5354 failures */ 45 if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) { 46 /* Change syn01 reg */ 47 ssb_write32(dev, 0x894, 0x00fe00fe); 48 49 /* Change syn03 reg */ 50 ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1); 51 } 52 #endif 53 } 54 55 static void ssb_hcd_usb20wa(struct ssb_device *dev) 56 { 57 if (dev->id.coreid == SSB_DEV_USB20_HOST) { 58 /* 59 * USB 2.0 special considerations: 60 * 61 * In addition to the standard SSB reset sequence, the Host 62 * Control Register must be programmed to bring the USB core 63 * and various phy components out of reset. 64 */ 65 ssb_write32(dev, 0x200, 0x7ff); 66 67 /* Change Flush control reg */ 68 ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8); 69 ssb_read32(dev, 0x400); 70 71 /* Change Shim control reg */ 72 ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100); 73 ssb_read32(dev, 0x304); 74 75 udelay(1); 76 77 ssb_hcd_5354wa(dev); 78 } 79 } 80 81 /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ 82 static u32 ssb_hcd_init_chip(struct ssb_device *dev) 83 { 84 u32 flags = 0; 85 86 if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) 87 /* Put the device into host-mode. */ 88 flags |= SSB_HCD_TMSLOW_HOSTMODE; 89 90 ssb_device_enable(dev, flags); 91 92 ssb_hcd_usb20wa(dev); 93 94 return flags; 95 } 96 97 static const struct usb_ehci_pdata ehci_pdata = { 98 }; 99 100 static const struct usb_ohci_pdata ohci_pdata = { 101 }; 102 103 static struct platform_device *ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len) 104 { 105 struct platform_device *hci_dev; 106 struct resource hci_res[2]; 107 int ret; 108 109 memset(hci_res, 0, sizeof(hci_res)); 110 111 hci_res[0].start = addr; 112 hci_res[0].end = hci_res[0].start + len - 1; 113 hci_res[0].flags = IORESOURCE_MEM; 114 115 hci_res[1].start = dev->irq; 116 hci_res[1].flags = IORESOURCE_IRQ; 117 118 hci_dev = platform_device_alloc(ohci ? "ohci-platform" : 119 "ehci-platform" , 0); 120 if (!hci_dev) 121 return ERR_PTR(-ENOMEM); 122 123 hci_dev->dev.parent = dev->dev; 124 hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask; 125 126 ret = platform_device_add_resources(hci_dev, hci_res, 127 ARRAY_SIZE(hci_res)); 128 if (ret) 129 goto err_alloc; 130 if (ohci) 131 ret = platform_device_add_data(hci_dev, &ohci_pdata, 132 sizeof(ohci_pdata)); 133 else 134 ret = platform_device_add_data(hci_dev, &ehci_pdata, 135 sizeof(ehci_pdata)); 136 if (ret) 137 goto err_alloc; 138 ret = platform_device_add(hci_dev); 139 if (ret) 140 goto err_alloc; 141 142 return hci_dev; 143 144 err_alloc: 145 platform_device_put(hci_dev); 146 return ERR_PTR(ret); 147 } 148 149 static int ssb_hcd_probe(struct ssb_device *dev, 150 const struct ssb_device_id *id) 151 { 152 int err, tmp; 153 int start, len; 154 u16 chipid_top; 155 u16 coreid = dev->id.coreid; 156 struct ssb_hcd_device *usb_dev; 157 158 /* USBcores are only connected on embedded devices. */ 159 chipid_top = (dev->bus->chip_id & 0xFF00); 160 if (chipid_top != 0x4700 && chipid_top != 0x5300) 161 return -ENODEV; 162 163 /* TODO: Probably need checks here; is the core connected? */ 164 165 if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32))) 166 return -EOPNOTSUPP; 167 168 usb_dev = devm_kzalloc(dev->dev, sizeof(struct ssb_hcd_device), 169 GFP_KERNEL); 170 if (!usb_dev) 171 return -ENOMEM; 172 173 /* We currently always attach SSB_DEV_USB11_HOSTDEV 174 * as HOST OHCI. If we want to attach it as Client device, 175 * we must branch here and call into the (yet to 176 * be written) Client mode driver. Same for remove(). */ 177 usb_dev->enable_flags = ssb_hcd_init_chip(dev); 178 179 tmp = ssb_read32(dev, SSB_ADMATCH0); 180 181 start = ssb_admatch_base(tmp); 182 len = (coreid == SSB_DEV_USB20_HOST) ? 0x800 : ssb_admatch_size(tmp); 183 usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, true, start, len); 184 if (IS_ERR(usb_dev->ohci_dev)) 185 return PTR_ERR(usb_dev->ohci_dev); 186 187 if (coreid == SSB_DEV_USB20_HOST) { 188 start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */ 189 usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, false, start, len); 190 if (IS_ERR(usb_dev->ehci_dev)) { 191 err = PTR_ERR(usb_dev->ehci_dev); 192 goto err_unregister_ohci_dev; 193 } 194 } 195 196 ssb_set_drvdata(dev, usb_dev); 197 return 0; 198 199 err_unregister_ohci_dev: 200 platform_device_unregister(usb_dev->ohci_dev); 201 return err; 202 } 203 204 static void ssb_hcd_remove(struct ssb_device *dev) 205 { 206 struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev); 207 struct platform_device *ohci_dev = usb_dev->ohci_dev; 208 struct platform_device *ehci_dev = usb_dev->ehci_dev; 209 210 if (ohci_dev) 211 platform_device_unregister(ohci_dev); 212 if (ehci_dev) 213 platform_device_unregister(ehci_dev); 214 215 ssb_device_disable(dev, 0); 216 } 217 218 static void ssb_hcd_shutdown(struct ssb_device *dev) 219 { 220 ssb_device_disable(dev, 0); 221 } 222 223 #ifdef CONFIG_PM 224 225 static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state) 226 { 227 ssb_device_disable(dev, 0); 228 229 return 0; 230 } 231 232 static int ssb_hcd_resume(struct ssb_device *dev) 233 { 234 struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev); 235 236 ssb_device_enable(dev, usb_dev->enable_flags); 237 238 return 0; 239 } 240 241 #else /* !CONFIG_PM */ 242 #define ssb_hcd_suspend NULL 243 #define ssb_hcd_resume NULL 244 #endif /* CONFIG_PM */ 245 246 static const struct ssb_device_id ssb_hcd_table[] = { 247 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), 248 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), 249 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), 250 {}, 251 }; 252 MODULE_DEVICE_TABLE(ssb, ssb_hcd_table); 253 254 static struct ssb_driver ssb_hcd_driver = { 255 .name = KBUILD_MODNAME, 256 .id_table = ssb_hcd_table, 257 .probe = ssb_hcd_probe, 258 .remove = ssb_hcd_remove, 259 .shutdown = ssb_hcd_shutdown, 260 .suspend = ssb_hcd_suspend, 261 .resume = ssb_hcd_resume, 262 }; 263 264 static int __init ssb_hcd_init(void) 265 { 266 return ssb_driver_register(&ssb_hcd_driver); 267 } 268 module_init(ssb_hcd_init); 269 270 static void __exit ssb_hcd_exit(void) 271 { 272 ssb_driver_unregister(&ssb_hcd_driver); 273 } 274 module_exit(ssb_hcd_exit); 275