1 /* 2 * Sonics Silicon Backplane 3 * Broadcom USB-core driver (SSB bus glue) 4 * 5 * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de> 6 * 7 * Based on ssb-ohci driver 8 * Copyright 2007 Michael Buesch <m@bues.ch> 9 * 10 * Derived from the OHCI-PCI driver 11 * Copyright 1999 Roman Weissgaerber 12 * Copyright 2000-2002 David Brownell 13 * Copyright 1999 Linus Torvalds 14 * Copyright 1999 Gregory P. Smith 15 * 16 * Derived from the USBcore related parts of Broadcom-SB 17 * Copyright 2005-2011 Broadcom Corporation 18 * 19 * Licensed under the GNU/GPL. See COPYING for details. 20 */ 21 #include <linux/ssb/ssb.h> 22 #include <linux/delay.h> 23 #include <linux/platform_device.h> 24 #include <linux/module.h> 25 #include <linux/slab.h> 26 #include <linux/usb/ehci_pdriver.h> 27 #include <linux/usb/ohci_pdriver.h> 28 29 MODULE_AUTHOR("Hauke Mehrtens"); 30 MODULE_DESCRIPTION("Common USB driver for SSB Bus"); 31 MODULE_LICENSE("GPL"); 32 33 #define SSB_HCD_TMSLOW_HOSTMODE (1 << 29) 34 35 struct ssb_hcd_device { 36 struct platform_device *ehci_dev; 37 struct platform_device *ohci_dev; 38 39 u32 enable_flags; 40 }; 41 42 static void ssb_hcd_5354wa(struct ssb_device *dev) 43 { 44 #ifdef CONFIG_SSB_DRIVER_MIPS 45 /* Work around for 5354 failures */ 46 if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) { 47 /* Change syn01 reg */ 48 ssb_write32(dev, 0x894, 0x00fe00fe); 49 50 /* Change syn03 reg */ 51 ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1); 52 } 53 #endif 54 } 55 56 static void ssb_hcd_usb20wa(struct ssb_device *dev) 57 { 58 if (dev->id.coreid == SSB_DEV_USB20_HOST) { 59 /* 60 * USB 2.0 special considerations: 61 * 62 * In addition to the standard SSB reset sequence, the Host 63 * Control Register must be programmed to bring the USB core 64 * and various phy components out of reset. 65 */ 66 ssb_write32(dev, 0x200, 0x7ff); 67 68 /* Change Flush control reg */ 69 ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8); 70 ssb_read32(dev, 0x400); 71 72 /* Change Shim control reg */ 73 ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100); 74 ssb_read32(dev, 0x304); 75 76 udelay(1); 77 78 ssb_hcd_5354wa(dev); 79 } 80 } 81 82 /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ 83 static u32 ssb_hcd_init_chip(struct ssb_device *dev) 84 { 85 u32 flags = 0; 86 87 if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) 88 /* Put the device into host-mode. */ 89 flags |= SSB_HCD_TMSLOW_HOSTMODE; 90 91 ssb_device_enable(dev, flags); 92 93 ssb_hcd_usb20wa(dev); 94 95 return flags; 96 } 97 98 static const struct usb_ehci_pdata ehci_pdata = { 99 }; 100 101 static const struct usb_ohci_pdata ohci_pdata = { 102 }; 103 104 static struct platform_device *ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len) 105 { 106 struct platform_device *hci_dev; 107 struct resource hci_res[2]; 108 int ret; 109 110 memset(hci_res, 0, sizeof(hci_res)); 111 112 hci_res[0].start = addr; 113 hci_res[0].end = hci_res[0].start + len - 1; 114 hci_res[0].flags = IORESOURCE_MEM; 115 116 hci_res[1].start = dev->irq; 117 hci_res[1].flags = IORESOURCE_IRQ; 118 119 hci_dev = platform_device_alloc(ohci ? "ohci-platform" : 120 "ehci-platform" , 0); 121 if (!hci_dev) 122 return ERR_PTR(-ENOMEM); 123 124 hci_dev->dev.parent = dev->dev; 125 hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask; 126 127 ret = platform_device_add_resources(hci_dev, hci_res, 128 ARRAY_SIZE(hci_res)); 129 if (ret) 130 goto err_alloc; 131 if (ohci) 132 ret = platform_device_add_data(hci_dev, &ohci_pdata, 133 sizeof(ohci_pdata)); 134 else 135 ret = platform_device_add_data(hci_dev, &ehci_pdata, 136 sizeof(ehci_pdata)); 137 if (ret) 138 goto err_alloc; 139 ret = platform_device_add(hci_dev); 140 if (ret) 141 goto err_alloc; 142 143 return hci_dev; 144 145 err_alloc: 146 platform_device_put(hci_dev); 147 return ERR_PTR(ret); 148 } 149 150 static int ssb_hcd_probe(struct ssb_device *dev, 151 const struct ssb_device_id *id) 152 { 153 int err, tmp; 154 int start, len; 155 u16 chipid_top; 156 u16 coreid = dev->id.coreid; 157 struct ssb_hcd_device *usb_dev; 158 159 /* USBcores are only connected on embedded devices. */ 160 chipid_top = (dev->bus->chip_id & 0xFF00); 161 if (chipid_top != 0x4700 && chipid_top != 0x5300) 162 return -ENODEV; 163 164 /* TODO: Probably need checks here; is the core connected? */ 165 166 if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32))) 167 return -EOPNOTSUPP; 168 169 usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL); 170 if (!usb_dev) 171 return -ENOMEM; 172 173 /* We currently always attach SSB_DEV_USB11_HOSTDEV 174 * as HOST OHCI. If we want to attach it as Client device, 175 * we must branch here and call into the (yet to 176 * be written) Client mode driver. Same for remove(). */ 177 usb_dev->enable_flags = ssb_hcd_init_chip(dev); 178 179 tmp = ssb_read32(dev, SSB_ADMATCH0); 180 181 start = ssb_admatch_base(tmp); 182 len = (coreid == SSB_DEV_USB20_HOST) ? 0x800 : ssb_admatch_size(tmp); 183 usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, true, start, len); 184 if (IS_ERR(usb_dev->ohci_dev)) { 185 err = PTR_ERR(usb_dev->ohci_dev); 186 goto err_free_usb_dev; 187 } 188 189 if (coreid == SSB_DEV_USB20_HOST) { 190 start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */ 191 usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, false, start, len); 192 if (IS_ERR(usb_dev->ehci_dev)) { 193 err = PTR_ERR(usb_dev->ehci_dev); 194 goto err_unregister_ohci_dev; 195 } 196 } 197 198 ssb_set_drvdata(dev, usb_dev); 199 return 0; 200 201 err_unregister_ohci_dev: 202 platform_device_unregister(usb_dev->ohci_dev); 203 err_free_usb_dev: 204 kfree(usb_dev); 205 return err; 206 } 207 208 static void ssb_hcd_remove(struct ssb_device *dev) 209 { 210 struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev); 211 struct platform_device *ohci_dev = usb_dev->ohci_dev; 212 struct platform_device *ehci_dev = usb_dev->ehci_dev; 213 214 if (ohci_dev) 215 platform_device_unregister(ohci_dev); 216 if (ehci_dev) 217 platform_device_unregister(ehci_dev); 218 219 ssb_device_disable(dev, 0); 220 } 221 222 static void ssb_hcd_shutdown(struct ssb_device *dev) 223 { 224 ssb_device_disable(dev, 0); 225 } 226 227 #ifdef CONFIG_PM 228 229 static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state) 230 { 231 ssb_device_disable(dev, 0); 232 233 return 0; 234 } 235 236 static int ssb_hcd_resume(struct ssb_device *dev) 237 { 238 struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev); 239 240 ssb_device_enable(dev, usb_dev->enable_flags); 241 242 return 0; 243 } 244 245 #else /* !CONFIG_PM */ 246 #define ssb_hcd_suspend NULL 247 #define ssb_hcd_resume NULL 248 #endif /* CONFIG_PM */ 249 250 static const struct ssb_device_id ssb_hcd_table[] = { 251 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), 252 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), 253 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), 254 {}, 255 }; 256 MODULE_DEVICE_TABLE(ssb, ssb_hcd_table); 257 258 static struct ssb_driver ssb_hcd_driver = { 259 .name = KBUILD_MODNAME, 260 .id_table = ssb_hcd_table, 261 .probe = ssb_hcd_probe, 262 .remove = ssb_hcd_remove, 263 .shutdown = ssb_hcd_shutdown, 264 .suspend = ssb_hcd_suspend, 265 .resume = ssb_hcd_resume, 266 }; 267 268 static int __init ssb_hcd_init(void) 269 { 270 return ssb_driver_register(&ssb_hcd_driver); 271 } 272 module_init(ssb_hcd_init); 273 274 static void __exit ssb_hcd_exit(void) 275 { 276 ssb_driver_unregister(&ssb_hcd_driver); 277 } 278 module_exit(ssb_hcd_exit); 279