xref: /openbmc/linux/drivers/usb/host/ssb-hcd.c (revision 12eb4683)
1 /*
2  * Sonics Silicon Backplane
3  * Broadcom USB-core driver  (SSB bus glue)
4  *
5  * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
6  *
7  * Based on ssb-ohci driver
8  * Copyright 2007 Michael Buesch <m@bues.ch>
9  *
10  * Derived from the OHCI-PCI driver
11  * Copyright 1999 Roman Weissgaerber
12  * Copyright 2000-2002 David Brownell
13  * Copyright 1999 Linus Torvalds
14  * Copyright 1999 Gregory P. Smith
15  *
16  * Derived from the USBcore related parts of Broadcom-SB
17  * Copyright 2005-2011 Broadcom Corporation
18  *
19  * Licensed under the GNU/GPL. See COPYING for details.
20  */
21 #include <linux/ssb/ssb.h>
22 #include <linux/delay.h>
23 #include <linux/platform_device.h>
24 #include <linux/module.h>
25 #include <linux/slab.h>
26 #include <linux/usb/ehci_pdriver.h>
27 #include <linux/usb/ohci_pdriver.h>
28 
29 MODULE_AUTHOR("Hauke Mehrtens");
30 MODULE_DESCRIPTION("Common USB driver for SSB Bus");
31 MODULE_LICENSE("GPL");
32 
33 #define SSB_HCD_TMSLOW_HOSTMODE	(1 << 29)
34 
35 struct ssb_hcd_device {
36 	struct platform_device *ehci_dev;
37 	struct platform_device *ohci_dev;
38 
39 	u32 enable_flags;
40 };
41 
42 static void ssb_hcd_5354wa(struct ssb_device *dev)
43 {
44 #ifdef CONFIG_SSB_DRIVER_MIPS
45 	/* Work around for 5354 failures */
46 	if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
47 		/* Change syn01 reg */
48 		ssb_write32(dev, 0x894, 0x00fe00fe);
49 
50 		/* Change syn03 reg */
51 		ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1);
52 	}
53 #endif
54 }
55 
56 static void ssb_hcd_usb20wa(struct ssb_device *dev)
57 {
58 	if (dev->id.coreid == SSB_DEV_USB20_HOST) {
59 		/*
60 		 * USB 2.0 special considerations:
61 		 *
62 		 * In addition to the standard SSB reset sequence, the Host
63 		 * Control Register must be programmed to bring the USB core
64 		 * and various phy components out of reset.
65 		 */
66 		ssb_write32(dev, 0x200, 0x7ff);
67 
68 		/* Change Flush control reg */
69 		ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8);
70 		ssb_read32(dev, 0x400);
71 
72 		/* Change Shim control reg */
73 		ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100);
74 		ssb_read32(dev, 0x304);
75 
76 		udelay(1);
77 
78 		ssb_hcd_5354wa(dev);
79 	}
80 }
81 
82 /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
83 static u32 ssb_hcd_init_chip(struct ssb_device *dev)
84 {
85 	u32 flags = 0;
86 
87 	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
88 		/* Put the device into host-mode. */
89 		flags |= SSB_HCD_TMSLOW_HOSTMODE;
90 
91 	ssb_device_enable(dev, flags);
92 
93 	ssb_hcd_usb20wa(dev);
94 
95 	return flags;
96 }
97 
98 static const struct usb_ehci_pdata ehci_pdata = {
99 };
100 
101 static const struct usb_ohci_pdata ohci_pdata = {
102 };
103 
104 static struct platform_device *ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len)
105 {
106 	struct platform_device *hci_dev;
107 	struct resource hci_res[2];
108 	int ret = -ENOMEM;
109 
110 	memset(hci_res, 0, sizeof(hci_res));
111 
112 	hci_res[0].start = addr;
113 	hci_res[0].end = hci_res[0].start + len - 1;
114 	hci_res[0].flags = IORESOURCE_MEM;
115 
116 	hci_res[1].start = dev->irq;
117 	hci_res[1].flags = IORESOURCE_IRQ;
118 
119 	hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
120 					"ehci-platform" , 0);
121 	if (!hci_dev)
122 		return NULL;
123 
124 	hci_dev->dev.parent = dev->dev;
125 	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
126 
127 	ret = platform_device_add_resources(hci_dev, hci_res,
128 					    ARRAY_SIZE(hci_res));
129 	if (ret)
130 		goto err_alloc;
131 	if (ohci)
132 		ret = platform_device_add_data(hci_dev, &ohci_pdata,
133 					       sizeof(ohci_pdata));
134 	else
135 		ret = platform_device_add_data(hci_dev, &ehci_pdata,
136 					       sizeof(ehci_pdata));
137 	if (ret)
138 		goto err_alloc;
139 	ret = platform_device_add(hci_dev);
140 	if (ret)
141 		goto err_alloc;
142 
143 	return hci_dev;
144 
145 err_alloc:
146 	platform_device_put(hci_dev);
147 	return ERR_PTR(ret);
148 }
149 
150 static int ssb_hcd_probe(struct ssb_device *dev,
151 				   const struct ssb_device_id *id)
152 {
153 	int err, tmp;
154 	int start, len;
155 	u16 chipid_top;
156 	u16 coreid = dev->id.coreid;
157 	struct ssb_hcd_device *usb_dev;
158 
159 	/* USBcores are only connected on embedded devices. */
160 	chipid_top = (dev->bus->chip_id & 0xFF00);
161 	if (chipid_top != 0x4700 && chipid_top != 0x5300)
162 		return -ENODEV;
163 
164 	/* TODO: Probably need checks here; is the core connected? */
165 
166 	if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
167 		return -EOPNOTSUPP;
168 
169 	usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL);
170 	if (!usb_dev)
171 		return -ENOMEM;
172 
173 	/* We currently always attach SSB_DEV_USB11_HOSTDEV
174 	 * as HOST OHCI. If we want to attach it as Client device,
175 	 * we must branch here and call into the (yet to
176 	 * be written) Client mode driver. Same for remove(). */
177 	usb_dev->enable_flags = ssb_hcd_init_chip(dev);
178 
179 	tmp = ssb_read32(dev, SSB_ADMATCH0);
180 
181 	start = ssb_admatch_base(tmp);
182 	len = (coreid == SSB_DEV_USB20_HOST) ? 0x800 : ssb_admatch_size(tmp);
183 	usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, true, start, len);
184 	if (IS_ERR(usb_dev->ohci_dev)) {
185 		err = PTR_ERR(usb_dev->ohci_dev);
186 		goto err_free_usb_dev;
187 	}
188 
189 	if (coreid == SSB_DEV_USB20_HOST) {
190 		start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
191 		usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, false, start, len);
192 		if (IS_ERR(usb_dev->ehci_dev)) {
193 			err = PTR_ERR(usb_dev->ehci_dev);
194 			goto err_unregister_ohci_dev;
195 		}
196 	}
197 
198 	ssb_set_drvdata(dev, usb_dev);
199 	return 0;
200 
201 err_unregister_ohci_dev:
202 	platform_device_unregister(usb_dev->ohci_dev);
203 err_free_usb_dev:
204 	kfree(usb_dev);
205 	return err;
206 }
207 
208 static void ssb_hcd_remove(struct ssb_device *dev)
209 {
210 	struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
211 	struct platform_device *ohci_dev = usb_dev->ohci_dev;
212 	struct platform_device *ehci_dev = usb_dev->ehci_dev;
213 
214 	if (ohci_dev)
215 		platform_device_unregister(ohci_dev);
216 	if (ehci_dev)
217 		platform_device_unregister(ehci_dev);
218 
219 	ssb_device_disable(dev, 0);
220 }
221 
222 static void ssb_hcd_shutdown(struct ssb_device *dev)
223 {
224 	ssb_device_disable(dev, 0);
225 }
226 
227 #ifdef CONFIG_PM
228 
229 static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state)
230 {
231 	ssb_device_disable(dev, 0);
232 
233 	return 0;
234 }
235 
236 static int ssb_hcd_resume(struct ssb_device *dev)
237 {
238 	struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
239 
240 	ssb_device_enable(dev, usb_dev->enable_flags);
241 
242 	return 0;
243 }
244 
245 #else /* !CONFIG_PM */
246 #define ssb_hcd_suspend	NULL
247 #define ssb_hcd_resume	NULL
248 #endif /* CONFIG_PM */
249 
250 static const struct ssb_device_id ssb_hcd_table[] = {
251 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
252 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
253 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
254 	SSB_DEVTABLE_END
255 };
256 MODULE_DEVICE_TABLE(ssb, ssb_hcd_table);
257 
258 static struct ssb_driver ssb_hcd_driver = {
259 	.name		= KBUILD_MODNAME,
260 	.id_table	= ssb_hcd_table,
261 	.probe		= ssb_hcd_probe,
262 	.remove		= ssb_hcd_remove,
263 	.shutdown	= ssb_hcd_shutdown,
264 	.suspend	= ssb_hcd_suspend,
265 	.resume		= ssb_hcd_resume,
266 };
267 
268 static int __init ssb_hcd_init(void)
269 {
270 	return ssb_driver_register(&ssb_hcd_driver);
271 }
272 module_init(ssb_hcd_init);
273 
274 static void __exit ssb_hcd_exit(void)
275 {
276 	ssb_driver_unregister(&ssb_hcd_driver);
277 }
278 module_exit(ssb_hcd_exit);
279