1 /* 2 * OHCI HCD (Host Controller Driver) for USB. 3 * 4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> 6 * 7 * This file is licenced under the GPL. 8 */ 9 10 /* 11 * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to 12 * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the 13 * host controller implementation. 14 */ 15 typedef __u32 __bitwise __hc32; 16 typedef __u16 __bitwise __hc16; 17 18 /* 19 * OHCI Endpoint Descriptor (ED) ... holds TD queue 20 * See OHCI spec, section 4.2 21 * 22 * This is a "Queue Head" for those transfers, which is why 23 * both EHCI and UHCI call similar structures a "QH". 24 */ 25 struct ed { 26 /* first fields are hardware-specified */ 27 __hc32 hwINFO; /* endpoint config bitmap */ 28 /* info bits defined by hcd */ 29 #define ED_DEQUEUE (1 << 27) 30 /* info bits defined by the hardware */ 31 #define ED_ISO (1 << 15) 32 #define ED_SKIP (1 << 14) 33 #define ED_LOWSPEED (1 << 13) 34 #define ED_OUT (0x01 << 11) 35 #define ED_IN (0x02 << 11) 36 __hc32 hwTailP; /* tail of TD list */ 37 __hc32 hwHeadP; /* head of TD list (hc r/w) */ 38 #define ED_C (0x02) /* toggle carry */ 39 #define ED_H (0x01) /* halted */ 40 __hc32 hwNextED; /* next ED in list */ 41 42 /* rest are purely for the driver's use */ 43 dma_addr_t dma; /* addr of ED */ 44 struct td *dummy; /* next TD to activate */ 45 46 /* host's view of schedule */ 47 struct ed *ed_next; /* on schedule or rm_list */ 48 struct ed *ed_prev; /* for non-interrupt EDs */ 49 struct list_head td_list; /* "shadow list" of our TDs */ 50 51 /* create --> IDLE --> OPER --> ... --> IDLE --> destroy 52 * usually: OPER --> UNLINK --> (IDLE | OPER) --> ... 53 */ 54 u8 state; /* ED_{IDLE,UNLINK,OPER} */ 55 #define ED_IDLE 0x00 /* NOT linked to HC */ 56 #define ED_UNLINK 0x01 /* being unlinked from hc */ 57 #define ED_OPER 0x02 /* IS linked to hc */ 58 59 u8 type; /* PIPE_{BULK,...} */ 60 61 /* periodic scheduling params (for intr and iso) */ 62 u8 branch; 63 u16 interval; 64 u16 load; 65 u16 last_iso; /* iso only */ 66 67 /* HC may see EDs on rm_list until next frame (frame_no == tick) */ 68 u16 tick; 69 } __attribute__ ((aligned(16))); 70 71 #define ED_MASK ((u32)~0x0f) /* strip hw status in low addr bits */ 72 73 74 /* 75 * OHCI Transfer Descriptor (TD) ... one per transfer segment 76 * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt) 77 * and 4.3.2 (iso) 78 */ 79 struct td { 80 /* first fields are hardware-specified */ 81 __hc32 hwINFO; /* transfer info bitmask */ 82 83 /* hwINFO bits for both general and iso tds: */ 84 #define TD_CC 0xf0000000 /* condition code */ 85 #define TD_CC_GET(td_p) ((td_p >>28) & 0x0f) 86 //#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28) 87 #define TD_DI 0x00E00000 /* frames before interrupt */ 88 #define TD_DI_SET(X) (((X) & 0x07)<< 21) 89 /* these two bits are available for definition/use by HCDs in both 90 * general and iso tds ... others are available for only one type 91 */ 92 #define TD_DONE 0x00020000 /* retired to donelist */ 93 #define TD_ISO 0x00010000 /* copy of ED_ISO */ 94 95 /* hwINFO bits for general tds: */ 96 #define TD_EC 0x0C000000 /* error count */ 97 #define TD_T 0x03000000 /* data toggle state */ 98 #define TD_T_DATA0 0x02000000 /* DATA0 */ 99 #define TD_T_DATA1 0x03000000 /* DATA1 */ 100 #define TD_T_TOGGLE 0x00000000 /* uses ED_C */ 101 #define TD_DP 0x00180000 /* direction/pid */ 102 #define TD_DP_SETUP 0x00000000 /* SETUP pid */ 103 #define TD_DP_IN 0x00100000 /* IN pid */ 104 #define TD_DP_OUT 0x00080000 /* OUT pid */ 105 /* 0x00180000 rsvd */ 106 #define TD_R 0x00040000 /* round: short packets OK? */ 107 108 /* (no hwINFO #defines yet for iso tds) */ 109 110 __hc32 hwCBP; /* Current Buffer Pointer (or 0) */ 111 __hc32 hwNextTD; /* Next TD Pointer */ 112 __hc32 hwBE; /* Memory Buffer End Pointer */ 113 114 /* PSW is only for ISO. Only 1 PSW entry is used, but on 115 * big-endian PPC hardware that's the second entry. 116 */ 117 #define MAXPSW 2 118 __hc16 hwPSW [MAXPSW]; 119 120 /* rest are purely for the driver's use */ 121 __u8 index; 122 struct ed *ed; 123 struct td *td_hash; /* dma-->td hashtable */ 124 struct td *next_dl_td; 125 struct urb *urb; 126 127 dma_addr_t td_dma; /* addr of this TD */ 128 dma_addr_t data_dma; /* addr of data it points to */ 129 130 struct list_head td_list; /* "shadow list", TDs on same ED */ 131 } __attribute__ ((aligned(32))); /* c/b/i need 16; only iso needs 32 */ 132 133 #define TD_MASK ((u32)~0x1f) /* strip hw status in low addr bits */ 134 135 /* 136 * Hardware transfer status codes -- CC from td->hwINFO or td->hwPSW 137 */ 138 #define TD_CC_NOERROR 0x00 139 #define TD_CC_CRC 0x01 140 #define TD_CC_BITSTUFFING 0x02 141 #define TD_CC_DATATOGGLEM 0x03 142 #define TD_CC_STALL 0x04 143 #define TD_DEVNOTRESP 0x05 144 #define TD_PIDCHECKFAIL 0x06 145 #define TD_UNEXPECTEDPID 0x07 146 #define TD_DATAOVERRUN 0x08 147 #define TD_DATAUNDERRUN 0x09 148 /* 0x0A, 0x0B reserved for hardware */ 149 #define TD_BUFFEROVERRUN 0x0C 150 #define TD_BUFFERUNDERRUN 0x0D 151 /* 0x0E, 0x0F reserved for HCD */ 152 #define TD_NOTACCESSED 0x0F 153 154 155 /* map OHCI TD status codes (CC) to errno values */ 156 static const int cc_to_error [16] = { 157 /* No Error */ 0, 158 /* CRC Error */ -EILSEQ, 159 /* Bit Stuff */ -EPROTO, 160 /* Data Togg */ -EILSEQ, 161 /* Stall */ -EPIPE, 162 /* DevNotResp */ -ETIME, 163 /* PIDCheck */ -EPROTO, 164 /* UnExpPID */ -EPROTO, 165 /* DataOver */ -EOVERFLOW, 166 /* DataUnder */ -EREMOTEIO, 167 /* (for hw) */ -EIO, 168 /* (for hw) */ -EIO, 169 /* BufferOver */ -ECOMM, 170 /* BuffUnder */ -ENOSR, 171 /* (for HCD) */ -EALREADY, 172 /* (for HCD) */ -EALREADY 173 }; 174 175 176 /* 177 * The HCCA (Host Controller Communications Area) is a 256 byte 178 * structure defined section 4.4.1 of the OHCI spec. The HC is 179 * told the base address of it. It must be 256-byte aligned. 180 */ 181 struct ohci_hcca { 182 #define NUM_INTS 32 183 __hc32 int_table [NUM_INTS]; /* periodic schedule */ 184 185 /* 186 * OHCI defines u16 frame_no, followed by u16 zero pad. 187 * Since some processors can't do 16 bit bus accesses, 188 * portable access must be a 32 bits wide. 189 */ 190 __hc32 frame_no; /* current frame number */ 191 __hc32 done_head; /* info returned for an interrupt */ 192 u8 reserved_for_hc [116]; 193 u8 what [4]; /* spec only identifies 252 bytes :) */ 194 } __attribute__ ((aligned(256))); 195 196 /* 197 * This is the structure of the OHCI controller's memory mapped I/O region. 198 * You must use readl() and writel() (in <asm/io.h>) to access these fields!! 199 * Layout is in section 7 (and appendix B) of the spec. 200 */ 201 struct ohci_regs { 202 /* control and status registers (section 7.1) */ 203 __hc32 revision; 204 __hc32 control; 205 __hc32 cmdstatus; 206 __hc32 intrstatus; 207 __hc32 intrenable; 208 __hc32 intrdisable; 209 210 /* memory pointers (section 7.2) */ 211 __hc32 hcca; 212 __hc32 ed_periodcurrent; 213 __hc32 ed_controlhead; 214 __hc32 ed_controlcurrent; 215 __hc32 ed_bulkhead; 216 __hc32 ed_bulkcurrent; 217 __hc32 donehead; 218 219 /* frame counters (section 7.3) */ 220 __hc32 fminterval; 221 __hc32 fmremaining; 222 __hc32 fmnumber; 223 __hc32 periodicstart; 224 __hc32 lsthresh; 225 226 /* Root hub ports (section 7.4) */ 227 struct ohci_roothub_regs { 228 __hc32 a; 229 __hc32 b; 230 __hc32 status; 231 #define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports (RH_A_NDP) */ 232 __hc32 portstatus [MAX_ROOT_PORTS]; 233 } roothub; 234 235 /* and optional "legacy support" registers (appendix B) at 0x0100 */ 236 237 } __attribute__ ((aligned(32))); 238 239 240 /* OHCI CONTROL AND STATUS REGISTER MASKS */ 241 242 /* 243 * HcControl (control) register masks 244 */ 245 #define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */ 246 #define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */ 247 #define OHCI_CTRL_IE (1 << 3) /* isochronous enable */ 248 #define OHCI_CTRL_CLE (1 << 4) /* control list enable */ 249 #define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */ 250 #define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */ 251 #define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ 252 #define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ 253 #define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */ 254 255 /* pre-shifted values for HCFS */ 256 # define OHCI_USB_RESET (0 << 6) 257 # define OHCI_USB_RESUME (1 << 6) 258 # define OHCI_USB_OPER (2 << 6) 259 # define OHCI_USB_SUSPEND (3 << 6) 260 261 /* 262 * HcCommandStatus (cmdstatus) register masks 263 */ 264 #define OHCI_HCR (1 << 0) /* host controller reset */ 265 #define OHCI_CLF (1 << 1) /* control list filled */ 266 #define OHCI_BLF (1 << 2) /* bulk list filled */ 267 #define OHCI_OCR (1 << 3) /* ownership change request */ 268 #define OHCI_SOC (3 << 16) /* scheduling overrun count */ 269 270 /* 271 * masks used with interrupt registers: 272 * HcInterruptStatus (intrstatus) 273 * HcInterruptEnable (intrenable) 274 * HcInterruptDisable (intrdisable) 275 */ 276 #define OHCI_INTR_SO (1 << 0) /* scheduling overrun */ 277 #define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */ 278 #define OHCI_INTR_SF (1 << 2) /* start frame */ 279 #define OHCI_INTR_RD (1 << 3) /* resume detect */ 280 #define OHCI_INTR_UE (1 << 4) /* unrecoverable error */ 281 #define OHCI_INTR_FNO (1 << 5) /* frame number overflow */ 282 #define OHCI_INTR_RHSC (1 << 6) /* root hub status change */ 283 #define OHCI_INTR_OC (1 << 30) /* ownership change */ 284 #define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */ 285 286 287 /* OHCI ROOT HUB REGISTER MASKS */ 288 289 /* roothub.portstatus [i] bits */ 290 #define RH_PS_CCS 0x00000001 /* current connect status */ 291 #define RH_PS_PES 0x00000002 /* port enable status*/ 292 #define RH_PS_PSS 0x00000004 /* port suspend status */ 293 #define RH_PS_POCI 0x00000008 /* port over current indicator */ 294 #define RH_PS_PRS 0x00000010 /* port reset status */ 295 #define RH_PS_PPS 0x00000100 /* port power status */ 296 #define RH_PS_LSDA 0x00000200 /* low speed device attached */ 297 #define RH_PS_CSC 0x00010000 /* connect status change */ 298 #define RH_PS_PESC 0x00020000 /* port enable status change */ 299 #define RH_PS_PSSC 0x00040000 /* port suspend status change */ 300 #define RH_PS_OCIC 0x00080000 /* over current indicator change */ 301 #define RH_PS_PRSC 0x00100000 /* port reset status change */ 302 303 /* roothub.status bits */ 304 #define RH_HS_LPS 0x00000001 /* local power status */ 305 #define RH_HS_OCI 0x00000002 /* over current indicator */ 306 #define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */ 307 #define RH_HS_LPSC 0x00010000 /* local power status change */ 308 #define RH_HS_OCIC 0x00020000 /* over current indicator change */ 309 #define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */ 310 311 /* roothub.b masks */ 312 #define RH_B_DR 0x0000ffff /* device removable flags */ 313 #define RH_B_PPCM 0xffff0000 /* port power control mask */ 314 315 /* roothub.a masks */ 316 #define RH_A_NDP (0xff << 0) /* number of downstream ports */ 317 #define RH_A_PSM (1 << 8) /* power switching mode */ 318 #define RH_A_NPS (1 << 9) /* no power switching */ 319 #define RH_A_DT (1 << 10) /* device type (mbz) */ 320 #define RH_A_OCPM (1 << 11) /* over current protection mode */ 321 #define RH_A_NOCP (1 << 12) /* no over current protection */ 322 #define RH_A_POTPGT (0xff << 24) /* power on to power good time */ 323 324 325 /* hcd-private per-urb state */ 326 typedef struct urb_priv { 327 struct ed *ed; 328 u16 length; // # tds in this request 329 u16 td_cnt; // tds already serviced 330 struct list_head pending; 331 struct td *td [0]; // all TDs in this request 332 333 } urb_priv_t; 334 335 #define TD_HASH_SIZE 64 /* power'o'two */ 336 // sizeof (struct td) ~= 64 == 2^6 ... 337 #define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE) 338 339 340 /* 341 * This is the full ohci controller description 342 * 343 * Note how the "proper" USB information is just 344 * a subset of what the full implementation needs. (Linus) 345 */ 346 347 struct ohci_hcd { 348 spinlock_t lock; 349 350 /* 351 * I/O memory used to communicate with the HC (dma-consistent) 352 */ 353 struct ohci_regs __iomem *regs; 354 355 /* 356 * main memory used to communicate with the HC (dma-consistent). 357 * hcd adds to schedule for a live hc any time, but removals finish 358 * only at the start of the next frame. 359 */ 360 struct ohci_hcca *hcca; 361 dma_addr_t hcca_dma; 362 363 struct ed *ed_rm_list; /* to be removed */ 364 365 struct ed *ed_bulktail; /* last in bulk list */ 366 struct ed *ed_controltail; /* last in ctrl list */ 367 struct ed *periodic [NUM_INTS]; /* shadow int_table */ 368 369 /* 370 * OTG controllers and transceivers need software interaction; 371 * other external transceivers should be software-transparent 372 */ 373 struct otg_transceiver *transceiver; 374 void (*start_hnp)(struct ohci_hcd *ohci); 375 376 /* 377 * memory management for queue data structures 378 */ 379 struct dma_pool *td_cache; 380 struct dma_pool *ed_cache; 381 struct td *td_hash [TD_HASH_SIZE]; 382 struct list_head pending; 383 384 /* 385 * driver state 386 */ 387 int num_ports; 388 int load [NUM_INTS]; 389 u32 hc_control; /* copy of hc control reg */ 390 unsigned long next_statechange; /* suspend/resume */ 391 u32 fminterval; /* saved register */ 392 unsigned autostop:1; /* rh auto stopping/stopped */ 393 394 unsigned long flags; /* for HC bugs */ 395 #define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */ 396 #define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */ 397 #define OHCI_QUIRK_INITRESET 0x04 /* SiS, OPTi, ... */ 398 #define OHCI_QUIRK_BE_DESC 0x08 /* BE descriptors */ 399 #define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */ 400 #define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/ 401 #define OHCI_QUIRK_NEC 0x40 /* lost interrupts */ 402 #define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */ 403 #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ 404 #define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/ 405 #define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ 406 #define OHCI_QUIRK_SHUTDOWN 0x800 /* nVidia power bug */ 407 // there are also chip quirks/bugs in init logic 408 409 struct work_struct nec_work; /* Worker for NEC quirk */ 410 411 /* Needed for ZF Micro quirk */ 412 struct timer_list unlink_watchdog; 413 unsigned eds_scheduled; 414 struct ed *ed_to_check; 415 unsigned zf_delay; 416 417 #ifdef DEBUG 418 struct dentry *debug_dir; 419 struct dentry *debug_async; 420 struct dentry *debug_periodic; 421 struct dentry *debug_registers; 422 #endif 423 }; 424 425 #ifdef CONFIG_PCI 426 static inline int quirk_nec(struct ohci_hcd *ohci) 427 { 428 return ohci->flags & OHCI_QUIRK_NEC; 429 } 430 static inline int quirk_zfmicro(struct ohci_hcd *ohci) 431 { 432 return ohci->flags & OHCI_QUIRK_ZFMICRO; 433 } 434 static inline int quirk_amdiso(struct ohci_hcd *ohci) 435 { 436 return ohci->flags & OHCI_QUIRK_AMD_PLL; 437 } 438 static inline int quirk_amdprefetch(struct ohci_hcd *ohci) 439 { 440 return ohci->flags & OHCI_QUIRK_AMD_PREFETCH; 441 } 442 #else 443 static inline int quirk_nec(struct ohci_hcd *ohci) 444 { 445 return 0; 446 } 447 static inline int quirk_zfmicro(struct ohci_hcd *ohci) 448 { 449 return 0; 450 } 451 static inline int quirk_amdiso(struct ohci_hcd *ohci) 452 { 453 return 0; 454 } 455 static inline int quirk_amdprefetch(struct ohci_hcd *ohci) 456 { 457 return 0; 458 } 459 #endif 460 461 /* convert between an hcd pointer and the corresponding ohci_hcd */ 462 static inline struct ohci_hcd *hcd_to_ohci (struct usb_hcd *hcd) 463 { 464 return (struct ohci_hcd *) (hcd->hcd_priv); 465 } 466 static inline struct usb_hcd *ohci_to_hcd (const struct ohci_hcd *ohci) 467 { 468 return container_of ((void *) ohci, struct usb_hcd, hcd_priv); 469 } 470 471 /*-------------------------------------------------------------------------*/ 472 473 #ifndef DEBUG 474 #define STUB_DEBUG_FILES 475 #endif /* DEBUG */ 476 477 #define ohci_dbg(ohci, fmt, args...) \ 478 dev_dbg (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) 479 #define ohci_err(ohci, fmt, args...) \ 480 dev_err (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) 481 #define ohci_info(ohci, fmt, args...) \ 482 dev_info (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) 483 #define ohci_warn(ohci, fmt, args...) \ 484 dev_warn (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) 485 486 #ifdef OHCI_VERBOSE_DEBUG 487 # define ohci_vdbg ohci_dbg 488 #else 489 # define ohci_vdbg(ohci, fmt, args...) do { } while (0) 490 #endif 491 492 /*-------------------------------------------------------------------------*/ 493 494 /* 495 * While most USB host controllers implement their registers and 496 * in-memory communication descriptors in little-endian format, 497 * a minority (notably the IBM STB04XXX and the Motorola MPC5200 498 * processors) implement them in big endian format. 499 * 500 * In addition some more exotic implementations like the Toshiba 501 * Spider (aka SCC) cell southbridge are "mixed" endian, that is, 502 * they have a different endianness for registers vs. in-memory 503 * descriptors. 504 * 505 * This attempts to support either format at compile time without a 506 * runtime penalty, or both formats with the additional overhead 507 * of checking a flag bit. 508 * 509 * That leads to some tricky Kconfig rules howevber. There are 510 * different defaults based on some arch/ppc platforms, though 511 * the basic rules are: 512 * 513 * Controller type Kconfig options needed 514 * --------------- ---------------------- 515 * little endian CONFIG_USB_OHCI_LITTLE_ENDIAN 516 * 517 * fully big endian CONFIG_USB_OHCI_BIG_ENDIAN_DESC _and_ 518 * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO 519 * 520 * mixed endian CONFIG_USB_OHCI_LITTLE_ENDIAN _and_ 521 * CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC} 522 * 523 * (If you have a mixed endian controller, you -must- also define 524 * CONFIG_USB_OHCI_LITTLE_ENDIAN or things will not work when building 525 * both your mixed endian and a fully big endian controller support in 526 * the same kernel image). 527 */ 528 529 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC 530 #ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN 531 #define big_endian_desc(ohci) (ohci->flags & OHCI_QUIRK_BE_DESC) 532 #else 533 #define big_endian_desc(ohci) 1 /* only big endian */ 534 #endif 535 #else 536 #define big_endian_desc(ohci) 0 /* only little endian */ 537 #endif 538 539 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO 540 #ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN 541 #define big_endian_mmio(ohci) (ohci->flags & OHCI_QUIRK_BE_MMIO) 542 #else 543 #define big_endian_mmio(ohci) 1 /* only big endian */ 544 #endif 545 #else 546 #define big_endian_mmio(ohci) 0 /* only little endian */ 547 #endif 548 549 /* 550 * Big-endian read/write functions are arch-specific. 551 * Other arches can be added if/when they're needed. 552 * 553 */ 554 static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci, 555 __hc32 __iomem * regs) 556 { 557 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO 558 return big_endian_mmio(ohci) ? 559 readl_be (regs) : 560 readl (regs); 561 #else 562 return readl (regs); 563 #endif 564 } 565 566 static inline void _ohci_writel (const struct ohci_hcd *ohci, 567 const unsigned int val, __hc32 __iomem *regs) 568 { 569 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO 570 big_endian_mmio(ohci) ? 571 writel_be (val, regs) : 572 writel (val, regs); 573 #else 574 writel (val, regs); 575 #endif 576 } 577 578 #define ohci_readl(o,r) _ohci_readl(o,r) 579 #define ohci_writel(o,v,r) _ohci_writel(o,v,r) 580 581 582 /*-------------------------------------------------------------------------*/ 583 584 /* cpu to ohci */ 585 static inline __hc16 cpu_to_hc16 (const struct ohci_hcd *ohci, const u16 x) 586 { 587 return big_endian_desc(ohci) ? 588 (__force __hc16)cpu_to_be16(x) : 589 (__force __hc16)cpu_to_le16(x); 590 } 591 592 static inline __hc16 cpu_to_hc16p (const struct ohci_hcd *ohci, const u16 *x) 593 { 594 return big_endian_desc(ohci) ? 595 cpu_to_be16p(x) : 596 cpu_to_le16p(x); 597 } 598 599 static inline __hc32 cpu_to_hc32 (const struct ohci_hcd *ohci, const u32 x) 600 { 601 return big_endian_desc(ohci) ? 602 (__force __hc32)cpu_to_be32(x) : 603 (__force __hc32)cpu_to_le32(x); 604 } 605 606 static inline __hc32 cpu_to_hc32p (const struct ohci_hcd *ohci, const u32 *x) 607 { 608 return big_endian_desc(ohci) ? 609 cpu_to_be32p(x) : 610 cpu_to_le32p(x); 611 } 612 613 /* ohci to cpu */ 614 static inline u16 hc16_to_cpu (const struct ohci_hcd *ohci, const __hc16 x) 615 { 616 return big_endian_desc(ohci) ? 617 be16_to_cpu((__force __be16)x) : 618 le16_to_cpu((__force __le16)x); 619 } 620 621 static inline u16 hc16_to_cpup (const struct ohci_hcd *ohci, const __hc16 *x) 622 { 623 return big_endian_desc(ohci) ? 624 be16_to_cpup((__force __be16 *)x) : 625 le16_to_cpup((__force __le16 *)x); 626 } 627 628 static inline u32 hc32_to_cpu (const struct ohci_hcd *ohci, const __hc32 x) 629 { 630 return big_endian_desc(ohci) ? 631 be32_to_cpu((__force __be32)x) : 632 le32_to_cpu((__force __le32)x); 633 } 634 635 static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x) 636 { 637 return big_endian_desc(ohci) ? 638 be32_to_cpup((__force __be32 *)x) : 639 le32_to_cpup((__force __le32 *)x); 640 } 641 642 /*-------------------------------------------------------------------------*/ 643 644 /* HCCA frame number is 16 bits, but is accessed as 32 bits since not all 645 * hardware handles 16 bit reads. That creates a different confusion on 646 * some big-endian SOC implementations. Same thing happens with PSW access. 647 */ 648 649 #ifdef CONFIG_PPC_MPC52xx 650 #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO) 651 #else 652 #define big_endian_frame_no_quirk(ohci) 0 653 #endif 654 655 static inline u16 ohci_frame_no(const struct ohci_hcd *ohci) 656 { 657 u32 tmp; 658 if (big_endian_desc(ohci)) { 659 tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no); 660 if (!big_endian_frame_no_quirk(ohci)) 661 tmp >>= 16; 662 } else 663 tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no); 664 665 return (u16)tmp; 666 } 667 668 static inline __hc16 *ohci_hwPSWp(const struct ohci_hcd *ohci, 669 const struct td *td, int index) 670 { 671 return (__hc16 *)(big_endian_desc(ohci) ? 672 &td->hwPSW[index ^ 1] : &td->hwPSW[index]); 673 } 674 675 static inline u16 ohci_hwPSW(const struct ohci_hcd *ohci, 676 const struct td *td, int index) 677 { 678 return hc16_to_cpup(ohci, ohci_hwPSWp(ohci, td, index)); 679 } 680 681 /*-------------------------------------------------------------------------*/ 682 683 static inline void disable (struct ohci_hcd *ohci) 684 { 685 ohci_to_hcd(ohci)->state = HC_STATE_HALT; 686 } 687 688 #define FI 0x2edf /* 12000 bits per frame (-1) */ 689 #define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7)) 690 #define FIT (1 << 31) 691 #define LSTHRESH 0x628 /* lowspeed bit threshold */ 692 693 static inline void periodic_reinit (struct ohci_hcd *ohci) 694 { 695 u32 fi = ohci->fminterval & 0x03fff; 696 u32 fit = ohci_readl(ohci, &ohci->regs->fminterval) & FIT; 697 698 ohci_writel (ohci, (fit ^ FIT) | ohci->fminterval, 699 &ohci->regs->fminterval); 700 ohci_writel (ohci, ((9 * fi) / 10) & 0x3fff, 701 &ohci->regs->periodicstart); 702 } 703 704 /* AMD-756 (D2 rev) reports corrupt register contents in some cases. 705 * The erratum (#4) description is incorrect. AMD's workaround waits 706 * till some bits (mostly reserved) are clear; ok for all revs. 707 */ 708 #define read_roothub(hc, register, mask) ({ \ 709 u32 temp = ohci_readl (hc, &hc->regs->roothub.register); \ 710 if (temp == -1) \ 711 disable (hc); \ 712 else if (hc->flags & OHCI_QUIRK_AMD756) \ 713 while (temp & mask) \ 714 temp = ohci_readl (hc, &hc->regs->roothub.register); \ 715 temp; }) 716 717 static inline u32 roothub_a (struct ohci_hcd *hc) 718 { return read_roothub (hc, a, 0xfc0fe000); } 719 static inline u32 roothub_b (struct ohci_hcd *hc) 720 { return ohci_readl (hc, &hc->regs->roothub.b); } 721 static inline u32 roothub_status (struct ohci_hcd *hc) 722 { return ohci_readl (hc, &hc->regs->roothub.status); } 723 static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i) 724 { return read_roothub (hc, portstatus [i], 0xffe0fce0); } 725