1 // SPDX-License-Identifier: GPL-1.0+ 2 /* 3 * OHCI HCD (Host Controller Driver) for USB. 4 * 5 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 6 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> 7 * (C) Copyright 2002 Hewlett-Packard Company 8 * 9 * SA1111 Bus Glue 10 * 11 * Written by Christopher Hoover <ch@hpl.hp.com> 12 * Based on fragments of previous driver by Russell King et al. 13 * 14 * This file is licenced under the GPL. 15 */ 16 17 #include <asm/mach-types.h> 18 #include <asm/hardware/sa1111.h> 19 20 #ifndef CONFIG_SA1111 21 #error "This file is SA-1111 bus glue. CONFIG_SA1111 must be defined." 22 #endif 23 24 #define USB_STATUS 0x0118 25 #define USB_RESET 0x011c 26 #define USB_IRQTEST 0x0120 27 28 #define USB_RESET_FORCEIFRESET (1 << 0) 29 #define USB_RESET_FORCEHCRESET (1 << 1) 30 #define USB_RESET_CLKGENRESET (1 << 2) 31 #define USB_RESET_SIMSCALEDOWN (1 << 3) 32 #define USB_RESET_USBINTTEST (1 << 4) 33 #define USB_RESET_SLEEPSTBYEN (1 << 5) 34 #define USB_RESET_PWRSENSELOW (1 << 6) 35 #define USB_RESET_PWRCTRLLOW (1 << 7) 36 37 #define USB_STATUS_IRQHCIRMTWKUP (1 << 7) 38 #define USB_STATUS_IRQHCIBUFFACC (1 << 8) 39 #define USB_STATUS_NIRQHCIM (1 << 9) 40 #define USB_STATUS_NHCIMFCLR (1 << 10) 41 #define USB_STATUS_USBPWRSENSE (1 << 11) 42 43 #if 0 44 static void dump_hci_status(struct usb_hcd *hcd, const char *label) 45 { 46 unsigned long status = readl_relaxed(hcd->regs + USB_STATUS); 47 48 printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label, 49 ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""), 50 ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""), 51 ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "), 52 ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "), 53 ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : "")); 54 } 55 #endif 56 57 static int ohci_sa1111_reset(struct usb_hcd *hcd) 58 { 59 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 60 61 ohci_hcd_init(ohci); 62 return ohci_init(ohci); 63 } 64 65 static int ohci_sa1111_start(struct usb_hcd *hcd) 66 { 67 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 68 int ret; 69 70 ret = ohci_run(ohci); 71 if (ret < 0) { 72 ohci_err(ohci, "can't start\n"); 73 ohci_stop(hcd); 74 } 75 return ret; 76 } 77 78 static const struct hc_driver ohci_sa1111_hc_driver = { 79 .description = hcd_name, 80 .product_desc = "SA-1111 OHCI", 81 .hcd_priv_size = sizeof(struct ohci_hcd), 82 83 /* 84 * generic hardware linkage 85 */ 86 .irq = ohci_irq, 87 .flags = HCD_USB11 | HCD_DMA | HCD_MEMORY, 88 89 /* 90 * basic lifecycle operations 91 */ 92 .reset = ohci_sa1111_reset, 93 .start = ohci_sa1111_start, 94 .stop = ohci_stop, 95 .shutdown = ohci_shutdown, 96 97 /* 98 * managing i/o requests and associated device resources 99 */ 100 .urb_enqueue = ohci_urb_enqueue, 101 .urb_dequeue = ohci_urb_dequeue, 102 .endpoint_disable = ohci_endpoint_disable, 103 104 /* 105 * scheduling support 106 */ 107 .get_frame_number = ohci_get_frame, 108 109 /* 110 * root hub support 111 */ 112 .hub_status_data = ohci_hub_status_data, 113 .hub_control = ohci_hub_control, 114 #ifdef CONFIG_PM 115 .bus_suspend = ohci_bus_suspend, 116 .bus_resume = ohci_bus_resume, 117 #endif 118 .start_port_reset = ohci_start_port_reset, 119 }; 120 121 static int sa1111_start_hc(struct sa1111_dev *dev) 122 { 123 unsigned int usb_rst = 0; 124 int ret; 125 126 dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n"); 127 128 if (machine_is_xp860() || 129 machine_is_assabet() || 130 machine_is_pfs168() || 131 machine_is_badge4()) 132 usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW; 133 134 /* 135 * Configure the power sense and control lines. Place the USB 136 * host controller in reset. 137 */ 138 writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET, 139 dev->mapbase + USB_RESET); 140 141 /* 142 * Now, carefully enable the USB clock, and take 143 * the USB host controller out of reset. 144 */ 145 ret = sa1111_enable_device(dev); 146 if (ret == 0) { 147 udelay(11); 148 writel_relaxed(usb_rst, dev->mapbase + USB_RESET); 149 } 150 151 return ret; 152 } 153 154 static void sa1111_stop_hc(struct sa1111_dev *dev) 155 { 156 unsigned int usb_rst; 157 158 dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n"); 159 160 /* 161 * Put the USB host controller into reset. 162 */ 163 usb_rst = readl_relaxed(dev->mapbase + USB_RESET); 164 writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET, 165 dev->mapbase + USB_RESET); 166 167 /* 168 * Stop the USB clock. 169 */ 170 sa1111_disable_device(dev); 171 } 172 173 /** 174 * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs 175 * 176 * Allocates basic resources for this USB host controller, and 177 * then invokes the start() method for the HCD associated with it. 178 */ 179 static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev) 180 { 181 struct usb_hcd *hcd; 182 int ret, irq; 183 184 if (usb_disabled()) 185 return -ENODEV; 186 187 /* 188 * We don't call dma_set_mask_and_coherent() here because the 189 * DMA mask has already been appropraitely setup by the core 190 * SA-1111 bus code (which includes bug workarounds.) 191 */ 192 193 hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111"); 194 if (!hcd) 195 return -ENOMEM; 196 197 hcd->rsrc_start = dev->res.start; 198 hcd->rsrc_len = resource_size(&dev->res); 199 200 irq = sa1111_get_irq(dev, 1); 201 if (irq <= 0) { 202 ret = irq ? : -ENXIO; 203 goto err1; 204 } 205 206 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { 207 dev_dbg(&dev->dev, "request_mem_region failed\n"); 208 ret = -EBUSY; 209 goto err1; 210 } 211 212 hcd->regs = dev->mapbase; 213 214 ret = sa1111_start_hc(dev); 215 if (ret) 216 goto err2; 217 218 ret = usb_add_hcd(hcd, irq, 0); 219 if (ret == 0) { 220 device_wakeup_enable(hcd->self.controller); 221 return ret; 222 } 223 224 sa1111_stop_hc(dev); 225 err2: 226 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 227 err1: 228 usb_put_hcd(hcd); 229 return ret; 230 } 231 232 /** 233 * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs 234 * @dev: USB Host Controller being removed 235 * 236 * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking 237 * the HCD's stop() method. 238 */ 239 static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev) 240 { 241 struct usb_hcd *hcd = sa1111_get_drvdata(dev); 242 243 usb_remove_hcd(hcd); 244 sa1111_stop_hc(dev); 245 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 246 usb_put_hcd(hcd); 247 248 return 0; 249 } 250 251 static void ohci_hcd_sa1111_shutdown(struct device *_dev) 252 { 253 struct sa1111_dev *dev = to_sa1111_device(_dev); 254 struct usb_hcd *hcd = sa1111_get_drvdata(dev); 255 256 if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { 257 hcd->driver->shutdown(hcd); 258 sa1111_stop_hc(dev); 259 } 260 } 261 262 static struct sa1111_driver ohci_hcd_sa1111_driver = { 263 .drv = { 264 .name = "sa1111-ohci", 265 .owner = THIS_MODULE, 266 .shutdown = ohci_hcd_sa1111_shutdown, 267 }, 268 .devid = SA1111_DEVID_USB, 269 .probe = ohci_hcd_sa1111_probe, 270 .remove = ohci_hcd_sa1111_remove, 271 }; 272