1 /* 2 * OHCI HCD (Host Controller Driver) for USB. 3 * 4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> 6 * (C) Copyright 2002 Hewlett-Packard Company 7 * 8 * USB Bus Glue for Samsung S3C2410 9 * 10 * Written by Christopher Hoover <ch@hpl.hp.com> 11 * Based on fragments of previous driver by Russell King et al. 12 * 13 * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c 14 * by Ben Dooks, <ben@simtec.co.uk> 15 * Copyright (C) 2004 Simtec Electronics 16 * 17 * Thanks to basprog@mail.ru for updates to newer kernels 18 * 19 * This file is licenced under the GPL. 20 */ 21 22 #include <linux/clk.h> 23 #include <linux/io.h> 24 #include <linux/kernel.h> 25 #include <linux/module.h> 26 #include <linux/platform_device.h> 27 #include <linux/platform_data/usb-ohci-s3c2410.h> 28 #include <linux/usb.h> 29 #include <linux/usb/hcd.h> 30 31 #include "ohci.h" 32 33 34 #define valid_port(idx) ((idx) == 1 || (idx) == 2) 35 36 /* clock device associated with the hcd */ 37 38 39 #define DRIVER_DESC "OHCI S3C2410 driver" 40 41 static const char hcd_name[] = "ohci-s3c2410"; 42 43 static struct clk *clk; 44 static struct clk *usb_clk; 45 46 /* forward definitions */ 47 48 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc); 49 50 /* conversion functions */ 51 52 static struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd) 53 { 54 return dev_get_platdata(hcd->self.controller); 55 } 56 57 static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd) 58 { 59 struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev); 60 61 dev_dbg(&dev->dev, "s3c2410_start_hc:\n"); 62 63 clk_prepare_enable(usb_clk); 64 mdelay(2); /* let the bus clock stabilise */ 65 66 clk_prepare_enable(clk); 67 68 if (info != NULL) { 69 info->hcd = hcd; 70 info->report_oc = s3c2410_hcd_oc; 71 72 if (info->enable_oc != NULL) 73 (info->enable_oc)(info, 1); 74 } 75 } 76 77 static void s3c2410_stop_hc(struct platform_device *dev) 78 { 79 struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev); 80 81 dev_dbg(&dev->dev, "s3c2410_stop_hc:\n"); 82 83 if (info != NULL) { 84 info->report_oc = NULL; 85 info->hcd = NULL; 86 87 if (info->enable_oc != NULL) 88 (info->enable_oc)(info, 0); 89 } 90 91 clk_disable_unprepare(clk); 92 clk_disable_unprepare(usb_clk); 93 } 94 95 /* ohci_s3c2410_hub_status_data 96 * 97 * update the status data from the hub with anything that 98 * has been detected by our system 99 */ 100 101 static int 102 ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf) 103 { 104 struct s3c2410_hcd_info *info = to_s3c2410_info(hcd); 105 struct s3c2410_hcd_port *port; 106 int orig; 107 int portno; 108 109 orig = ohci_hub_status_data(hcd, buf); 110 111 if (info == NULL) 112 return orig; 113 114 port = &info->port[0]; 115 116 /* mark any changed port as changed */ 117 118 for (portno = 0; portno < 2; port++, portno++) { 119 if (port->oc_changed == 1 && 120 port->flags & S3C_HCDFLG_USED) { 121 dev_dbg(hcd->self.controller, 122 "oc change on port %d\n", portno); 123 124 if (orig < 1) 125 orig = 1; 126 127 buf[0] |= 1<<(portno+1); 128 } 129 } 130 131 return orig; 132 } 133 134 /* s3c2410_usb_set_power 135 * 136 * configure the power on a port, by calling the platform device 137 * routine registered with the platform device 138 */ 139 140 static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info, 141 int port, int to) 142 { 143 if (info == NULL) 144 return; 145 146 if (info->power_control != NULL) { 147 info->port[port-1].power = to; 148 (info->power_control)(port-1, to); 149 } 150 } 151 152 /* ohci_s3c2410_hub_control 153 * 154 * look at control requests to the hub, and see if we need 155 * to take any action or over-ride the results from the 156 * request. 157 */ 158 159 static int ohci_s3c2410_hub_control( 160 struct usb_hcd *hcd, 161 u16 typeReq, 162 u16 wValue, 163 u16 wIndex, 164 char *buf, 165 u16 wLength) 166 { 167 struct s3c2410_hcd_info *info = to_s3c2410_info(hcd); 168 struct usb_hub_descriptor *desc; 169 int ret = -EINVAL; 170 u32 *data = (u32 *)buf; 171 172 dev_dbg(hcd->self.controller, 173 "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n", 174 hcd, typeReq, wValue, wIndex, buf, wLength); 175 176 /* if we are only an humble host without any special capabilities 177 * process the request straight away and exit */ 178 179 if (info == NULL) { 180 ret = ohci_hub_control(hcd, typeReq, wValue, 181 wIndex, buf, wLength); 182 goto out; 183 } 184 185 /* check the request to see if it needs handling */ 186 187 switch (typeReq) { 188 case SetPortFeature: 189 if (wValue == USB_PORT_FEAT_POWER) { 190 dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n"); 191 s3c2410_usb_set_power(info, wIndex, 1); 192 goto out; 193 } 194 break; 195 196 case ClearPortFeature: 197 switch (wValue) { 198 case USB_PORT_FEAT_C_OVER_CURRENT: 199 dev_dbg(hcd->self.controller, 200 "ClearPortFeature: C_OVER_CURRENT\n"); 201 202 if (valid_port(wIndex)) { 203 info->port[wIndex-1].oc_changed = 0; 204 info->port[wIndex-1].oc_status = 0; 205 } 206 207 goto out; 208 209 case USB_PORT_FEAT_OVER_CURRENT: 210 dev_dbg(hcd->self.controller, 211 "ClearPortFeature: OVER_CURRENT\n"); 212 213 if (valid_port(wIndex)) 214 info->port[wIndex-1].oc_status = 0; 215 216 goto out; 217 218 case USB_PORT_FEAT_POWER: 219 dev_dbg(hcd->self.controller, 220 "ClearPortFeature: POWER\n"); 221 222 if (valid_port(wIndex)) { 223 s3c2410_usb_set_power(info, wIndex, 0); 224 return 0; 225 } 226 } 227 break; 228 } 229 230 ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); 231 if (ret) 232 goto out; 233 234 switch (typeReq) { 235 case GetHubDescriptor: 236 237 /* update the hub's descriptor */ 238 239 desc = (struct usb_hub_descriptor *)buf; 240 241 if (info->power_control == NULL) 242 return ret; 243 244 dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n", 245 desc->wHubCharacteristics); 246 247 /* remove the old configurations for power-switching, and 248 * over-current protection, and insert our new configuration 249 */ 250 251 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM); 252 desc->wHubCharacteristics |= cpu_to_le16(0x0001); 253 254 if (info->enable_oc) { 255 desc->wHubCharacteristics &= ~cpu_to_le16( 256 HUB_CHAR_OCPM); 257 desc->wHubCharacteristics |= cpu_to_le16( 258 0x0008 | 259 0x0001); 260 } 261 262 dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n", 263 desc->wHubCharacteristics); 264 265 return ret; 266 267 case GetPortStatus: 268 /* check port status */ 269 270 dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex); 271 272 if (valid_port(wIndex)) { 273 if (info->port[wIndex-1].oc_changed) 274 *data |= cpu_to_le32(RH_PS_OCIC); 275 276 if (info->port[wIndex-1].oc_status) 277 *data |= cpu_to_le32(RH_PS_POCI); 278 } 279 } 280 281 out: 282 return ret; 283 } 284 285 /* s3c2410_hcd_oc 286 * 287 * handle an over-current report 288 */ 289 290 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc) 291 { 292 struct s3c2410_hcd_port *port; 293 struct usb_hcd *hcd; 294 unsigned long flags; 295 int portno; 296 297 if (info == NULL) 298 return; 299 300 port = &info->port[0]; 301 hcd = info->hcd; 302 303 local_irq_save(flags); 304 305 for (portno = 0; portno < 2; port++, portno++) { 306 if (port_oc & (1<<portno) && 307 port->flags & S3C_HCDFLG_USED) { 308 port->oc_status = 1; 309 port->oc_changed = 1; 310 311 /* ok, once over-current is detected, 312 the port needs to be powered down */ 313 s3c2410_usb_set_power(info, portno+1, 0); 314 } 315 } 316 317 local_irq_restore(flags); 318 } 319 320 /* may be called without controller electrically present */ 321 /* may be called with controller, bus, and devices active */ 322 323 /* 324 * usb_hcd_s3c2410_remove - shutdown processing for HCD 325 * @dev: USB Host Controller being removed 326 * Context: !in_interrupt() 327 * 328 * Reverses the effect of usb_hcd_3c2410_probe(), first invoking 329 * the HCD's stop() method. It is always called from a thread 330 * context, normally "rmmod", "apmd", or something similar. 331 * 332 */ 333 334 static void 335 usb_hcd_s3c2410_remove(struct usb_hcd *hcd, struct platform_device *dev) 336 { 337 usb_remove_hcd(hcd); 338 s3c2410_stop_hc(dev); 339 usb_put_hcd(hcd); 340 } 341 342 /** 343 * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs 344 * Context: !in_interrupt() 345 * 346 * Allocates basic resources for this USB host controller, and 347 * then invokes the start() method for the HCD associated with it 348 * through the hotplug entry's driver_data. 349 * 350 */ 351 static int usb_hcd_s3c2410_probe(const struct hc_driver *driver, 352 struct platform_device *dev) 353 { 354 struct usb_hcd *hcd = NULL; 355 struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev); 356 int retval; 357 358 s3c2410_usb_set_power(info, 1, 1); 359 s3c2410_usb_set_power(info, 2, 1); 360 361 hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx"); 362 if (hcd == NULL) 363 return -ENOMEM; 364 365 hcd->rsrc_start = dev->resource[0].start; 366 hcd->rsrc_len = resource_size(&dev->resource[0]); 367 368 hcd->regs = devm_ioremap_resource(&dev->dev, &dev->resource[0]); 369 if (IS_ERR(hcd->regs)) { 370 retval = PTR_ERR(hcd->regs); 371 goto err_put; 372 } 373 374 clk = devm_clk_get(&dev->dev, "usb-host"); 375 if (IS_ERR(clk)) { 376 dev_err(&dev->dev, "cannot get usb-host clock\n"); 377 retval = PTR_ERR(clk); 378 goto err_put; 379 } 380 381 usb_clk = devm_clk_get(&dev->dev, "usb-bus-host"); 382 if (IS_ERR(usb_clk)) { 383 dev_err(&dev->dev, "cannot get usb-bus-host clock\n"); 384 retval = PTR_ERR(usb_clk); 385 goto err_put; 386 } 387 388 s3c2410_start_hc(dev, hcd); 389 390 retval = usb_add_hcd(hcd, dev->resource[1].start, 0); 391 if (retval != 0) 392 goto err_ioremap; 393 394 device_wakeup_enable(hcd->self.controller); 395 return 0; 396 397 err_ioremap: 398 s3c2410_stop_hc(dev); 399 400 err_put: 401 usb_put_hcd(hcd); 402 return retval; 403 } 404 405 /*-------------------------------------------------------------------------*/ 406 407 static struct hc_driver __read_mostly ohci_s3c2410_hc_driver; 408 409 static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev) 410 { 411 return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev); 412 } 413 414 static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev) 415 { 416 struct usb_hcd *hcd = platform_get_drvdata(pdev); 417 418 usb_hcd_s3c2410_remove(hcd, pdev); 419 return 0; 420 } 421 422 #ifdef CONFIG_PM 423 static int ohci_hcd_s3c2410_drv_suspend(struct device *dev) 424 { 425 struct usb_hcd *hcd = dev_get_drvdata(dev); 426 struct platform_device *pdev = to_platform_device(dev); 427 bool do_wakeup = device_may_wakeup(dev); 428 int rc = 0; 429 430 rc = ohci_suspend(hcd, do_wakeup); 431 if (rc) 432 return rc; 433 434 s3c2410_stop_hc(pdev); 435 436 return rc; 437 } 438 439 static int ohci_hcd_s3c2410_drv_resume(struct device *dev) 440 { 441 struct usb_hcd *hcd = dev_get_drvdata(dev); 442 struct platform_device *pdev = to_platform_device(dev); 443 444 s3c2410_start_hc(pdev, hcd); 445 446 ohci_resume(hcd, false); 447 448 return 0; 449 } 450 #else 451 #define ohci_hcd_s3c2410_drv_suspend NULL 452 #define ohci_hcd_s3c2410_drv_resume NULL 453 #endif 454 455 static const struct dev_pm_ops ohci_hcd_s3c2410_pm_ops = { 456 .suspend = ohci_hcd_s3c2410_drv_suspend, 457 .resume = ohci_hcd_s3c2410_drv_resume, 458 }; 459 460 static struct platform_driver ohci_hcd_s3c2410_driver = { 461 .probe = ohci_hcd_s3c2410_drv_probe, 462 .remove = ohci_hcd_s3c2410_drv_remove, 463 .shutdown = usb_hcd_platform_shutdown, 464 .driver = { 465 .name = "s3c2410-ohci", 466 .pm = &ohci_hcd_s3c2410_pm_ops, 467 }, 468 }; 469 470 static int __init ohci_s3c2410_init(void) 471 { 472 if (usb_disabled()) 473 return -ENODEV; 474 475 pr_info("%s: " DRIVER_DESC "\n", hcd_name); 476 ohci_init_driver(&ohci_s3c2410_hc_driver, NULL); 477 478 /* 479 * The Samsung HW has some unusual quirks, which require 480 * Sumsung-specific workarounds. We override certain hc_driver 481 * functions here to achieve that. We explicitly do not enhance 482 * ohci_driver_overrides to allow this more easily, since this 483 * is an unusual case, and we don't want to encourage others to 484 * override these functions by making it too easy. 485 */ 486 487 ohci_s3c2410_hc_driver.hub_status_data = ohci_s3c2410_hub_status_data; 488 ohci_s3c2410_hc_driver.hub_control = ohci_s3c2410_hub_control; 489 490 return platform_driver_register(&ohci_hcd_s3c2410_driver); 491 } 492 module_init(ohci_s3c2410_init); 493 494 static void __exit ohci_s3c2410_cleanup(void) 495 { 496 platform_driver_unregister(&ohci_hcd_s3c2410_driver); 497 } 498 module_exit(ohci_s3c2410_cleanup); 499 500 MODULE_DESCRIPTION(DRIVER_DESC); 501 MODULE_LICENSE("GPL"); 502 MODULE_ALIAS("platform:s3c2410-ohci"); 503