1 // SPDX-License-Identifier: GPL-1.0+ 2 /* 3 * OHCI HCD (Host Controller Driver) for USB. 4 * 5 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 6 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> 7 * (C) Copyright 2002 Hewlett-Packard Company 8 * 9 * USB Bus Glue for Samsung S3C2410 10 * 11 * Written by Christopher Hoover <ch@hpl.hp.com> 12 * Based on fragments of previous driver by Russell King et al. 13 * 14 * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c 15 * by Ben Dooks, <ben@simtec.co.uk> 16 * Copyright (C) 2004 Simtec Electronics 17 * 18 * Thanks to basprog@mail.ru for updates to newer kernels 19 * 20 * This file is licenced under the GPL. 21 */ 22 23 #include <linux/clk.h> 24 #include <linux/io.h> 25 #include <linux/kernel.h> 26 #include <linux/module.h> 27 #include <linux/platform_device.h> 28 #include <linux/platform_data/usb-ohci-s3c2410.h> 29 #include <linux/usb.h> 30 #include <linux/usb/hcd.h> 31 32 #include "ohci.h" 33 34 35 #define valid_port(idx) ((idx) == 1 || (idx) == 2) 36 37 /* clock device associated with the hcd */ 38 39 40 #define DRIVER_DESC "OHCI S3C2410 driver" 41 42 static struct clk *clk; 43 static struct clk *usb_clk; 44 45 static struct hc_driver __read_mostly ohci_s3c2410_hc_driver; 46 47 /* forward definitions */ 48 49 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc); 50 51 /* conversion functions */ 52 53 static struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd) 54 { 55 return dev_get_platdata(hcd->self.controller); 56 } 57 58 static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd) 59 { 60 struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev); 61 62 dev_dbg(&dev->dev, "s3c2410_start_hc:\n"); 63 64 clk_prepare_enable(usb_clk); 65 mdelay(2); /* let the bus clock stabilise */ 66 67 clk_prepare_enable(clk); 68 69 if (info != NULL) { 70 info->hcd = hcd; 71 info->report_oc = s3c2410_hcd_oc; 72 73 if (info->enable_oc != NULL) 74 (info->enable_oc)(info, 1); 75 } 76 } 77 78 static void s3c2410_stop_hc(struct platform_device *dev) 79 { 80 struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev); 81 82 dev_dbg(&dev->dev, "s3c2410_stop_hc:\n"); 83 84 if (info != NULL) { 85 info->report_oc = NULL; 86 info->hcd = NULL; 87 88 if (info->enable_oc != NULL) 89 (info->enable_oc)(info, 0); 90 } 91 92 clk_disable_unprepare(clk); 93 clk_disable_unprepare(usb_clk); 94 } 95 96 /* ohci_s3c2410_hub_status_data 97 * 98 * update the status data from the hub with anything that 99 * has been detected by our system 100 */ 101 102 static int 103 ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf) 104 { 105 struct s3c2410_hcd_info *info = to_s3c2410_info(hcd); 106 struct s3c2410_hcd_port *port; 107 int orig; 108 int portno; 109 110 orig = ohci_hub_status_data(hcd, buf); 111 112 if (info == NULL) 113 return orig; 114 115 port = &info->port[0]; 116 117 /* mark any changed port as changed */ 118 119 for (portno = 0; portno < 2; port++, portno++) { 120 if (port->oc_changed == 1 && 121 port->flags & S3C_HCDFLG_USED) { 122 dev_dbg(hcd->self.controller, 123 "oc change on port %d\n", portno); 124 125 if (orig < 1) 126 orig = 1; 127 128 buf[0] |= 1<<(portno+1); 129 } 130 } 131 132 return orig; 133 } 134 135 /* s3c2410_usb_set_power 136 * 137 * configure the power on a port, by calling the platform device 138 * routine registered with the platform device 139 */ 140 141 static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info, 142 int port, int to) 143 { 144 if (info == NULL) 145 return; 146 147 if (info->power_control != NULL) { 148 info->port[port-1].power = to; 149 (info->power_control)(port-1, to); 150 } 151 } 152 153 /* ohci_s3c2410_hub_control 154 * 155 * look at control requests to the hub, and see if we need 156 * to take any action or over-ride the results from the 157 * request. 158 */ 159 160 static int ohci_s3c2410_hub_control( 161 struct usb_hcd *hcd, 162 u16 typeReq, 163 u16 wValue, 164 u16 wIndex, 165 char *buf, 166 u16 wLength) 167 { 168 struct s3c2410_hcd_info *info = to_s3c2410_info(hcd); 169 struct usb_hub_descriptor *desc; 170 int ret = -EINVAL; 171 u32 *data = (u32 *)buf; 172 173 dev_dbg(hcd->self.controller, 174 "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n", 175 hcd, typeReq, wValue, wIndex, buf, wLength); 176 177 /* if we are only an humble host without any special capabilities 178 * process the request straight away and exit */ 179 180 if (info == NULL) { 181 ret = ohci_hub_control(hcd, typeReq, wValue, 182 wIndex, buf, wLength); 183 goto out; 184 } 185 186 /* check the request to see if it needs handling */ 187 188 switch (typeReq) { 189 case SetPortFeature: 190 if (wValue == USB_PORT_FEAT_POWER) { 191 dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n"); 192 s3c2410_usb_set_power(info, wIndex, 1); 193 goto out; 194 } 195 break; 196 197 case ClearPortFeature: 198 switch (wValue) { 199 case USB_PORT_FEAT_C_OVER_CURRENT: 200 dev_dbg(hcd->self.controller, 201 "ClearPortFeature: C_OVER_CURRENT\n"); 202 203 if (valid_port(wIndex)) { 204 info->port[wIndex-1].oc_changed = 0; 205 info->port[wIndex-1].oc_status = 0; 206 } 207 208 goto out; 209 210 case USB_PORT_FEAT_OVER_CURRENT: 211 dev_dbg(hcd->self.controller, 212 "ClearPortFeature: OVER_CURRENT\n"); 213 214 if (valid_port(wIndex)) 215 info->port[wIndex-1].oc_status = 0; 216 217 goto out; 218 219 case USB_PORT_FEAT_POWER: 220 dev_dbg(hcd->self.controller, 221 "ClearPortFeature: POWER\n"); 222 223 if (valid_port(wIndex)) { 224 s3c2410_usb_set_power(info, wIndex, 0); 225 return 0; 226 } 227 } 228 break; 229 } 230 231 ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); 232 if (ret) 233 goto out; 234 235 switch (typeReq) { 236 case GetHubDescriptor: 237 238 /* update the hub's descriptor */ 239 240 desc = (struct usb_hub_descriptor *)buf; 241 242 if (info->power_control == NULL) 243 return ret; 244 245 dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n", 246 desc->wHubCharacteristics); 247 248 /* remove the old configurations for power-switching, and 249 * over-current protection, and insert our new configuration 250 */ 251 252 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM); 253 desc->wHubCharacteristics |= cpu_to_le16( 254 HUB_CHAR_INDV_PORT_LPSM); 255 256 if (info->enable_oc) { 257 desc->wHubCharacteristics &= ~cpu_to_le16( 258 HUB_CHAR_OCPM); 259 desc->wHubCharacteristics |= cpu_to_le16( 260 HUB_CHAR_INDV_PORT_OCPM); 261 } 262 263 dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n", 264 desc->wHubCharacteristics); 265 266 return ret; 267 268 case GetPortStatus: 269 /* check port status */ 270 271 dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex); 272 273 if (valid_port(wIndex)) { 274 if (info->port[wIndex-1].oc_changed) 275 *data |= cpu_to_le32(RH_PS_OCIC); 276 277 if (info->port[wIndex-1].oc_status) 278 *data |= cpu_to_le32(RH_PS_POCI); 279 } 280 } 281 282 out: 283 return ret; 284 } 285 286 /* s3c2410_hcd_oc 287 * 288 * handle an over-current report 289 */ 290 291 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc) 292 { 293 struct s3c2410_hcd_port *port; 294 unsigned long flags; 295 int portno; 296 297 if (info == NULL) 298 return; 299 300 port = &info->port[0]; 301 302 local_irq_save(flags); 303 304 for (portno = 0; portno < 2; port++, portno++) { 305 if (port_oc & (1<<portno) && 306 port->flags & S3C_HCDFLG_USED) { 307 port->oc_status = 1; 308 port->oc_changed = 1; 309 310 /* ok, once over-current is detected, 311 the port needs to be powered down */ 312 s3c2410_usb_set_power(info, portno+1, 0); 313 } 314 } 315 316 local_irq_restore(flags); 317 } 318 319 /* may be called without controller electrically present */ 320 /* may be called with controller, bus, and devices active */ 321 322 /* 323 * ohci_hcd_s3c2410_remove - shutdown processing for HCD 324 * @dev: USB Host Controller being removed 325 * 326 * Context: task context, might sleep 327 * 328 * Reverses the effect of ohci_hcd_3c2410_probe(), first invoking 329 * the HCD's stop() method. It is always called from a thread 330 * context, normally "rmmod", "apmd", or something similar. 331 */ 332 static int 333 ohci_hcd_s3c2410_remove(struct platform_device *dev) 334 { 335 struct usb_hcd *hcd = platform_get_drvdata(dev); 336 337 usb_remove_hcd(hcd); 338 s3c2410_stop_hc(dev); 339 usb_put_hcd(hcd); 340 return 0; 341 } 342 343 /* 344 * ohci_hcd_s3c2410_probe - initialize S3C2410-based HCDs 345 * @dev: USB Host Controller to be probed 346 * 347 * Context: task context, might sleep 348 * 349 * Allocates basic resources for this USB host controller, and 350 * then invokes the start() method for the HCD associated with it 351 * through the hotplug entry's driver_data. 352 */ 353 static int ohci_hcd_s3c2410_probe(struct platform_device *dev) 354 { 355 struct usb_hcd *hcd = NULL; 356 struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev); 357 int retval, irq; 358 359 s3c2410_usb_set_power(info, 1, 1); 360 s3c2410_usb_set_power(info, 2, 1); 361 362 hcd = usb_create_hcd(&ohci_s3c2410_hc_driver, &dev->dev, "s3c24xx"); 363 if (hcd == NULL) 364 return -ENOMEM; 365 366 hcd->rsrc_start = dev->resource[0].start; 367 hcd->rsrc_len = resource_size(&dev->resource[0]); 368 369 hcd->regs = devm_ioremap_resource(&dev->dev, &dev->resource[0]); 370 if (IS_ERR(hcd->regs)) { 371 retval = PTR_ERR(hcd->regs); 372 goto err_put; 373 } 374 375 clk = devm_clk_get(&dev->dev, "usb-host"); 376 if (IS_ERR(clk)) { 377 dev_err(&dev->dev, "cannot get usb-host clock\n"); 378 retval = PTR_ERR(clk); 379 goto err_put; 380 } 381 382 usb_clk = devm_clk_get(&dev->dev, "usb-bus-host"); 383 if (IS_ERR(usb_clk)) { 384 dev_err(&dev->dev, "cannot get usb-bus-host clock\n"); 385 retval = PTR_ERR(usb_clk); 386 goto err_put; 387 } 388 389 irq = platform_get_irq(dev, 0); 390 if (irq < 0) { 391 retval = irq; 392 goto err_put; 393 } 394 395 s3c2410_start_hc(dev, hcd); 396 397 retval = usb_add_hcd(hcd, irq, 0); 398 if (retval != 0) 399 goto err_ioremap; 400 401 device_wakeup_enable(hcd->self.controller); 402 return 0; 403 404 err_ioremap: 405 s3c2410_stop_hc(dev); 406 407 err_put: 408 usb_put_hcd(hcd); 409 return retval; 410 } 411 412 /*-------------------------------------------------------------------------*/ 413 414 #ifdef CONFIG_PM 415 static int ohci_hcd_s3c2410_drv_suspend(struct device *dev) 416 { 417 struct usb_hcd *hcd = dev_get_drvdata(dev); 418 struct platform_device *pdev = to_platform_device(dev); 419 bool do_wakeup = device_may_wakeup(dev); 420 int rc = 0; 421 422 rc = ohci_suspend(hcd, do_wakeup); 423 if (rc) 424 return rc; 425 426 s3c2410_stop_hc(pdev); 427 428 return rc; 429 } 430 431 static int ohci_hcd_s3c2410_drv_resume(struct device *dev) 432 { 433 struct usb_hcd *hcd = dev_get_drvdata(dev); 434 struct platform_device *pdev = to_platform_device(dev); 435 436 s3c2410_start_hc(pdev, hcd); 437 438 ohci_resume(hcd, false); 439 440 return 0; 441 } 442 #else 443 #define ohci_hcd_s3c2410_drv_suspend NULL 444 #define ohci_hcd_s3c2410_drv_resume NULL 445 #endif 446 447 static const struct dev_pm_ops ohci_hcd_s3c2410_pm_ops = { 448 .suspend = ohci_hcd_s3c2410_drv_suspend, 449 .resume = ohci_hcd_s3c2410_drv_resume, 450 }; 451 452 static const struct of_device_id ohci_hcd_s3c2410_dt_ids[] = { 453 { .compatible = "samsung,s3c2410-ohci" }, 454 { /* sentinel */ } 455 }; 456 457 MODULE_DEVICE_TABLE(of, ohci_hcd_s3c2410_dt_ids); 458 459 static struct platform_driver ohci_hcd_s3c2410_driver = { 460 .probe = ohci_hcd_s3c2410_probe, 461 .remove = ohci_hcd_s3c2410_remove, 462 .shutdown = usb_hcd_platform_shutdown, 463 .driver = { 464 .name = "s3c2410-ohci", 465 .pm = &ohci_hcd_s3c2410_pm_ops, 466 .of_match_table = ohci_hcd_s3c2410_dt_ids, 467 }, 468 }; 469 470 static int __init ohci_s3c2410_init(void) 471 { 472 if (usb_disabled()) 473 return -ENODEV; 474 475 ohci_init_driver(&ohci_s3c2410_hc_driver, NULL); 476 477 /* 478 * The Samsung HW has some unusual quirks, which require 479 * Sumsung-specific workarounds. We override certain hc_driver 480 * functions here to achieve that. We explicitly do not enhance 481 * ohci_driver_overrides to allow this more easily, since this 482 * is an unusual case, and we don't want to encourage others to 483 * override these functions by making it too easy. 484 */ 485 486 ohci_s3c2410_hc_driver.hub_status_data = ohci_s3c2410_hub_status_data; 487 ohci_s3c2410_hc_driver.hub_control = ohci_s3c2410_hub_control; 488 489 return platform_driver_register(&ohci_hcd_s3c2410_driver); 490 } 491 module_init(ohci_s3c2410_init); 492 493 static void __exit ohci_s3c2410_cleanup(void) 494 { 495 platform_driver_unregister(&ohci_hcd_s3c2410_driver); 496 } 497 module_exit(ohci_s3c2410_cleanup); 498 499 MODULE_DESCRIPTION(DRIVER_DESC); 500 MODULE_LICENSE("GPL"); 501 MODULE_ALIAS("platform:s3c2410-ohci"); 502