1 // SPDX-License-Identifier: GPL-1.0+ 2 /* 3 * OHCI HCD (Host Controller Driver) for USB. 4 * 5 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 6 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> 7 * (C) Copyright 2002 Hewlett-Packard Company 8 * 9 * USB Bus Glue for Samsung S3C2410 10 * 11 * Written by Christopher Hoover <ch@hpl.hp.com> 12 * Based on fragments of previous driver by Russell King et al. 13 * 14 * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c 15 * by Ben Dooks, <ben@simtec.co.uk> 16 * Copyright (C) 2004 Simtec Electronics 17 * 18 * Thanks to basprog@mail.ru for updates to newer kernels 19 * 20 * This file is licenced under the GPL. 21 */ 22 23 #include <linux/clk.h> 24 #include <linux/io.h> 25 #include <linux/kernel.h> 26 #include <linux/module.h> 27 #include <linux/platform_device.h> 28 #include <linux/platform_data/usb-ohci-s3c2410.h> 29 #include <linux/usb.h> 30 #include <linux/usb/hcd.h> 31 32 #include "ohci.h" 33 34 35 #define valid_port(idx) ((idx) == 1 || (idx) == 2) 36 37 /* clock device associated with the hcd */ 38 39 40 #define DRIVER_DESC "OHCI S3C2410 driver" 41 42 static const char hcd_name[] = "ohci-s3c2410"; 43 44 static struct clk *clk; 45 static struct clk *usb_clk; 46 47 static struct hc_driver __read_mostly ohci_s3c2410_hc_driver; 48 49 /* forward definitions */ 50 51 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc); 52 53 /* conversion functions */ 54 55 static struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd) 56 { 57 return dev_get_platdata(hcd->self.controller); 58 } 59 60 static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd) 61 { 62 struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev); 63 64 dev_dbg(&dev->dev, "s3c2410_start_hc:\n"); 65 66 clk_prepare_enable(usb_clk); 67 mdelay(2); /* let the bus clock stabilise */ 68 69 clk_prepare_enable(clk); 70 71 if (info != NULL) { 72 info->hcd = hcd; 73 info->report_oc = s3c2410_hcd_oc; 74 75 if (info->enable_oc != NULL) 76 (info->enable_oc)(info, 1); 77 } 78 } 79 80 static void s3c2410_stop_hc(struct platform_device *dev) 81 { 82 struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev); 83 84 dev_dbg(&dev->dev, "s3c2410_stop_hc:\n"); 85 86 if (info != NULL) { 87 info->report_oc = NULL; 88 info->hcd = NULL; 89 90 if (info->enable_oc != NULL) 91 (info->enable_oc)(info, 0); 92 } 93 94 clk_disable_unprepare(clk); 95 clk_disable_unprepare(usb_clk); 96 } 97 98 /* ohci_s3c2410_hub_status_data 99 * 100 * update the status data from the hub with anything that 101 * has been detected by our system 102 */ 103 104 static int 105 ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf) 106 { 107 struct s3c2410_hcd_info *info = to_s3c2410_info(hcd); 108 struct s3c2410_hcd_port *port; 109 int orig; 110 int portno; 111 112 orig = ohci_hub_status_data(hcd, buf); 113 114 if (info == NULL) 115 return orig; 116 117 port = &info->port[0]; 118 119 /* mark any changed port as changed */ 120 121 for (portno = 0; portno < 2; port++, portno++) { 122 if (port->oc_changed == 1 && 123 port->flags & S3C_HCDFLG_USED) { 124 dev_dbg(hcd->self.controller, 125 "oc change on port %d\n", portno); 126 127 if (orig < 1) 128 orig = 1; 129 130 buf[0] |= 1<<(portno+1); 131 } 132 } 133 134 return orig; 135 } 136 137 /* s3c2410_usb_set_power 138 * 139 * configure the power on a port, by calling the platform device 140 * routine registered with the platform device 141 */ 142 143 static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info, 144 int port, int to) 145 { 146 if (info == NULL) 147 return; 148 149 if (info->power_control != NULL) { 150 info->port[port-1].power = to; 151 (info->power_control)(port-1, to); 152 } 153 } 154 155 /* ohci_s3c2410_hub_control 156 * 157 * look at control requests to the hub, and see if we need 158 * to take any action or over-ride the results from the 159 * request. 160 */ 161 162 static int ohci_s3c2410_hub_control( 163 struct usb_hcd *hcd, 164 u16 typeReq, 165 u16 wValue, 166 u16 wIndex, 167 char *buf, 168 u16 wLength) 169 { 170 struct s3c2410_hcd_info *info = to_s3c2410_info(hcd); 171 struct usb_hub_descriptor *desc; 172 int ret = -EINVAL; 173 u32 *data = (u32 *)buf; 174 175 dev_dbg(hcd->self.controller, 176 "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n", 177 hcd, typeReq, wValue, wIndex, buf, wLength); 178 179 /* if we are only an humble host without any special capabilities 180 * process the request straight away and exit */ 181 182 if (info == NULL) { 183 ret = ohci_hub_control(hcd, typeReq, wValue, 184 wIndex, buf, wLength); 185 goto out; 186 } 187 188 /* check the request to see if it needs handling */ 189 190 switch (typeReq) { 191 case SetPortFeature: 192 if (wValue == USB_PORT_FEAT_POWER) { 193 dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n"); 194 s3c2410_usb_set_power(info, wIndex, 1); 195 goto out; 196 } 197 break; 198 199 case ClearPortFeature: 200 switch (wValue) { 201 case USB_PORT_FEAT_C_OVER_CURRENT: 202 dev_dbg(hcd->self.controller, 203 "ClearPortFeature: C_OVER_CURRENT\n"); 204 205 if (valid_port(wIndex)) { 206 info->port[wIndex-1].oc_changed = 0; 207 info->port[wIndex-1].oc_status = 0; 208 } 209 210 goto out; 211 212 case USB_PORT_FEAT_OVER_CURRENT: 213 dev_dbg(hcd->self.controller, 214 "ClearPortFeature: OVER_CURRENT\n"); 215 216 if (valid_port(wIndex)) 217 info->port[wIndex-1].oc_status = 0; 218 219 goto out; 220 221 case USB_PORT_FEAT_POWER: 222 dev_dbg(hcd->self.controller, 223 "ClearPortFeature: POWER\n"); 224 225 if (valid_port(wIndex)) { 226 s3c2410_usb_set_power(info, wIndex, 0); 227 return 0; 228 } 229 } 230 break; 231 } 232 233 ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); 234 if (ret) 235 goto out; 236 237 switch (typeReq) { 238 case GetHubDescriptor: 239 240 /* update the hub's descriptor */ 241 242 desc = (struct usb_hub_descriptor *)buf; 243 244 if (info->power_control == NULL) 245 return ret; 246 247 dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n", 248 desc->wHubCharacteristics); 249 250 /* remove the old configurations for power-switching, and 251 * over-current protection, and insert our new configuration 252 */ 253 254 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM); 255 desc->wHubCharacteristics |= cpu_to_le16( 256 HUB_CHAR_INDV_PORT_LPSM); 257 258 if (info->enable_oc) { 259 desc->wHubCharacteristics &= ~cpu_to_le16( 260 HUB_CHAR_OCPM); 261 desc->wHubCharacteristics |= cpu_to_le16( 262 HUB_CHAR_INDV_PORT_OCPM); 263 } 264 265 dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n", 266 desc->wHubCharacteristics); 267 268 return ret; 269 270 case GetPortStatus: 271 /* check port status */ 272 273 dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex); 274 275 if (valid_port(wIndex)) { 276 if (info->port[wIndex-1].oc_changed) 277 *data |= cpu_to_le32(RH_PS_OCIC); 278 279 if (info->port[wIndex-1].oc_status) 280 *data |= cpu_to_le32(RH_PS_POCI); 281 } 282 } 283 284 out: 285 return ret; 286 } 287 288 /* s3c2410_hcd_oc 289 * 290 * handle an over-current report 291 */ 292 293 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc) 294 { 295 struct s3c2410_hcd_port *port; 296 unsigned long flags; 297 int portno; 298 299 if (info == NULL) 300 return; 301 302 port = &info->port[0]; 303 304 local_irq_save(flags); 305 306 for (portno = 0; portno < 2; port++, portno++) { 307 if (port_oc & (1<<portno) && 308 port->flags & S3C_HCDFLG_USED) { 309 port->oc_status = 1; 310 port->oc_changed = 1; 311 312 /* ok, once over-current is detected, 313 the port needs to be powered down */ 314 s3c2410_usb_set_power(info, portno+1, 0); 315 } 316 } 317 318 local_irq_restore(flags); 319 } 320 321 /* may be called without controller electrically present */ 322 /* may be called with controller, bus, and devices active */ 323 324 /* 325 * ohci_hcd_s3c2410_remove - shutdown processing for HCD 326 * @dev: USB Host Controller being removed 327 * Context: !in_interrupt() 328 * 329 * Reverses the effect of ohci_hcd_3c2410_probe(), first invoking 330 * the HCD's stop() method. It is always called from a thread 331 * context, normally "rmmod", "apmd", or something similar. 332 * 333 */ 334 335 static int 336 ohci_hcd_s3c2410_remove(struct platform_device *dev) 337 { 338 struct usb_hcd *hcd = platform_get_drvdata(dev); 339 340 usb_remove_hcd(hcd); 341 s3c2410_stop_hc(dev); 342 usb_put_hcd(hcd); 343 return 0; 344 } 345 346 /** 347 * ohci_hcd_s3c2410_probe - initialize S3C2410-based HCDs 348 * Context: !in_interrupt() 349 * 350 * Allocates basic resources for this USB host controller, and 351 * then invokes the start() method for the HCD associated with it 352 * through the hotplug entry's driver_data. 353 * 354 */ 355 static int ohci_hcd_s3c2410_probe(struct platform_device *dev) 356 { 357 struct usb_hcd *hcd = NULL; 358 struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev); 359 int retval; 360 361 s3c2410_usb_set_power(info, 1, 1); 362 s3c2410_usb_set_power(info, 2, 1); 363 364 hcd = usb_create_hcd(&ohci_s3c2410_hc_driver, &dev->dev, "s3c24xx"); 365 if (hcd == NULL) 366 return -ENOMEM; 367 368 hcd->rsrc_start = dev->resource[0].start; 369 hcd->rsrc_len = resource_size(&dev->resource[0]); 370 371 hcd->regs = devm_ioremap_resource(&dev->dev, &dev->resource[0]); 372 if (IS_ERR(hcd->regs)) { 373 retval = PTR_ERR(hcd->regs); 374 goto err_put; 375 } 376 377 clk = devm_clk_get(&dev->dev, "usb-host"); 378 if (IS_ERR(clk)) { 379 dev_err(&dev->dev, "cannot get usb-host clock\n"); 380 retval = PTR_ERR(clk); 381 goto err_put; 382 } 383 384 usb_clk = devm_clk_get(&dev->dev, "usb-bus-host"); 385 if (IS_ERR(usb_clk)) { 386 dev_err(&dev->dev, "cannot get usb-bus-host clock\n"); 387 retval = PTR_ERR(usb_clk); 388 goto err_put; 389 } 390 391 s3c2410_start_hc(dev, hcd); 392 393 retval = usb_add_hcd(hcd, dev->resource[1].start, 0); 394 if (retval != 0) 395 goto err_ioremap; 396 397 device_wakeup_enable(hcd->self.controller); 398 return 0; 399 400 err_ioremap: 401 s3c2410_stop_hc(dev); 402 403 err_put: 404 usb_put_hcd(hcd); 405 return retval; 406 } 407 408 /*-------------------------------------------------------------------------*/ 409 410 #ifdef CONFIG_PM 411 static int ohci_hcd_s3c2410_drv_suspend(struct device *dev) 412 { 413 struct usb_hcd *hcd = dev_get_drvdata(dev); 414 struct platform_device *pdev = to_platform_device(dev); 415 bool do_wakeup = device_may_wakeup(dev); 416 int rc = 0; 417 418 rc = ohci_suspend(hcd, do_wakeup); 419 if (rc) 420 return rc; 421 422 s3c2410_stop_hc(pdev); 423 424 return rc; 425 } 426 427 static int ohci_hcd_s3c2410_drv_resume(struct device *dev) 428 { 429 struct usb_hcd *hcd = dev_get_drvdata(dev); 430 struct platform_device *pdev = to_platform_device(dev); 431 432 s3c2410_start_hc(pdev, hcd); 433 434 ohci_resume(hcd, false); 435 436 return 0; 437 } 438 #else 439 #define ohci_hcd_s3c2410_drv_suspend NULL 440 #define ohci_hcd_s3c2410_drv_resume NULL 441 #endif 442 443 static const struct dev_pm_ops ohci_hcd_s3c2410_pm_ops = { 444 .suspend = ohci_hcd_s3c2410_drv_suspend, 445 .resume = ohci_hcd_s3c2410_drv_resume, 446 }; 447 448 static const struct of_device_id ohci_hcd_s3c2410_dt_ids[] = { 449 { .compatible = "samsung,s3c2410-ohci" }, 450 { /* sentinel */ } 451 }; 452 453 MODULE_DEVICE_TABLE(of, ohci_hcd_s3c2410_dt_ids); 454 455 static struct platform_driver ohci_hcd_s3c2410_driver = { 456 .probe = ohci_hcd_s3c2410_probe, 457 .remove = ohci_hcd_s3c2410_remove, 458 .shutdown = usb_hcd_platform_shutdown, 459 .driver = { 460 .name = "s3c2410-ohci", 461 .pm = &ohci_hcd_s3c2410_pm_ops, 462 .of_match_table = ohci_hcd_s3c2410_dt_ids, 463 }, 464 }; 465 466 static int __init ohci_s3c2410_init(void) 467 { 468 if (usb_disabled()) 469 return -ENODEV; 470 471 pr_info("%s: " DRIVER_DESC "\n", hcd_name); 472 ohci_init_driver(&ohci_s3c2410_hc_driver, NULL); 473 474 /* 475 * The Samsung HW has some unusual quirks, which require 476 * Sumsung-specific workarounds. We override certain hc_driver 477 * functions here to achieve that. We explicitly do not enhance 478 * ohci_driver_overrides to allow this more easily, since this 479 * is an unusual case, and we don't want to encourage others to 480 * override these functions by making it too easy. 481 */ 482 483 ohci_s3c2410_hc_driver.hub_status_data = ohci_s3c2410_hub_status_data; 484 ohci_s3c2410_hc_driver.hub_control = ohci_s3c2410_hub_control; 485 486 return platform_driver_register(&ohci_hcd_s3c2410_driver); 487 } 488 module_init(ohci_s3c2410_init); 489 490 static void __exit ohci_s3c2410_cleanup(void) 491 { 492 platform_driver_unregister(&ohci_hcd_s3c2410_driver); 493 } 494 module_exit(ohci_s3c2410_cleanup); 495 496 MODULE_DESCRIPTION(DRIVER_DESC); 497 MODULE_LICENSE("GPL"); 498 MODULE_ALIAS("platform:s3c2410-ohci"); 499