1 // SPDX-License-Identifier: GPL-1.0+ 2 /* 3 * OHCI HCD (Host Controller Driver) for USB. 4 * 5 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 6 * (C) Copyright 2000-2005 David Brownell 7 * (C) Copyright 2002 Hewlett-Packard Company 8 * 9 * OMAP Bus Glue 10 * 11 * Modified for OMAP by Tony Lindgren <tony@atomide.com> 12 * Based on the 2.4 OMAP OHCI driver originally done by MontaVista Software Inc. 13 * and on ohci-sa1111.c by Christopher Hoover <ch@hpl.hp.com> 14 * 15 * This file is licenced under the GPL. 16 */ 17 18 #include <linux/clk.h> 19 #include <linux/dma-mapping.h> 20 #include <linux/err.h> 21 #include <linux/gpio/consumer.h> 22 #include <linux/io.h> 23 #include <linux/jiffies.h> 24 #include <linux/kernel.h> 25 #include <linux/module.h> 26 #include <linux/usb/otg.h> 27 #include <linux/platform_device.h> 28 #include <linux/signal.h> 29 #include <linux/usb.h> 30 #include <linux/usb/hcd.h> 31 32 #include "ohci.h" 33 34 #include <asm/io.h> 35 #include <asm/mach-types.h> 36 37 #include <mach/mux.h> 38 39 #include <mach/hardware.h> 40 #include <mach/usb.h> 41 42 43 /* OMAP-1510 OHCI has its own MMU for DMA */ 44 #define OMAP1510_LB_MEMSIZE 32 /* Should be same as SDRAM size */ 45 #define OMAP1510_LB_CLOCK_DIV 0xfffec10c 46 #define OMAP1510_LB_MMU_CTL 0xfffec208 47 #define OMAP1510_LB_MMU_LCK 0xfffec224 48 #define OMAP1510_LB_MMU_LD_TLB 0xfffec228 49 #define OMAP1510_LB_MMU_CAM_H 0xfffec22c 50 #define OMAP1510_LB_MMU_CAM_L 0xfffec230 51 #define OMAP1510_LB_MMU_RAM_H 0xfffec234 52 #define OMAP1510_LB_MMU_RAM_L 0xfffec238 53 54 #define DRIVER_DESC "OHCI OMAP driver" 55 56 struct ohci_omap_priv { 57 struct clk *usb_host_ck; 58 struct clk *usb_dc_ck; 59 struct gpio_desc *power; 60 struct gpio_desc *overcurrent; 61 }; 62 63 static const char hcd_name[] = "ohci-omap"; 64 static struct hc_driver __read_mostly ohci_omap_hc_driver; 65 66 #define hcd_to_ohci_omap_priv(h) \ 67 ((struct ohci_omap_priv *)hcd_to_ohci(h)->priv) 68 69 static void omap_ohci_clock_power(struct ohci_omap_priv *priv, int on) 70 { 71 if (on) { 72 clk_enable(priv->usb_dc_ck); 73 clk_enable(priv->usb_host_ck); 74 /* guesstimate for T5 == 1x 32K clock + APLL lock time */ 75 udelay(100); 76 } else { 77 clk_disable(priv->usb_host_ck); 78 clk_disable(priv->usb_dc_ck); 79 } 80 } 81 82 /* 83 * Board specific gang-switched transceiver power on/off. 84 * NOTE: OSK supplies power from DC, not battery. 85 */ 86 static int omap_ohci_transceiver_power(struct ohci_omap_priv *priv, int on) 87 { 88 if (on) { 89 if (machine_is_omap_innovator() && cpu_is_omap1510()) 90 __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) 91 | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), 92 INNOVATOR_FPGA_CAM_USB_CONTROL); 93 else if (priv->power) 94 gpiod_set_value(priv->power, 0); 95 } else { 96 if (machine_is_omap_innovator() && cpu_is_omap1510()) 97 __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) 98 & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), 99 INNOVATOR_FPGA_CAM_USB_CONTROL); 100 else if (priv->power) 101 gpiod_set_value(priv->power, 1); 102 } 103 104 return 0; 105 } 106 107 #ifdef CONFIG_ARCH_OMAP15XX 108 /* 109 * OMAP-1510 specific Local Bus clock on/off 110 */ 111 static int omap_1510_local_bus_power(int on) 112 { 113 if (on) { 114 omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL); 115 udelay(200); 116 } else { 117 omap_writel(0, OMAP1510_LB_MMU_CTL); 118 } 119 120 return 0; 121 } 122 123 /* 124 * OMAP-1510 specific Local Bus initialization 125 * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE. 126 * See also arch/mach-omap/memory.h for __virt_to_dma() and 127 * __dma_to_virt() which need to match with the physical 128 * Local Bus address below. 129 */ 130 static int omap_1510_local_bus_init(void) 131 { 132 unsigned int tlb; 133 unsigned long lbaddr, physaddr; 134 135 omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, 136 OMAP1510_LB_CLOCK_DIV); 137 138 /* Configure the Local Bus MMU table */ 139 for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) { 140 lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET; 141 physaddr = tlb * 0x00100000 + PHYS_OFFSET; 142 omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H); 143 omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, 144 OMAP1510_LB_MMU_CAM_L); 145 omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H); 146 omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L); 147 omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK); 148 omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB); 149 } 150 151 /* Enable the walking table */ 152 omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL); 153 udelay(200); 154 155 return 0; 156 } 157 #else 158 #define omap_1510_local_bus_power(x) {} 159 #define omap_1510_local_bus_init() {} 160 #endif 161 162 #ifdef CONFIG_USB_OTG 163 164 static void start_hnp(struct ohci_hcd *ohci) 165 { 166 struct usb_hcd *hcd = ohci_to_hcd(ohci); 167 const unsigned port = hcd->self.otg_port - 1; 168 unsigned long flags; 169 u32 l; 170 171 otg_start_hnp(hcd->usb_phy->otg); 172 173 local_irq_save(flags); 174 hcd->usb_phy->otg->state = OTG_STATE_A_SUSPEND; 175 writel (RH_PS_PSS, &ohci->regs->roothub.portstatus [port]); 176 l = omap_readl(OTG_CTRL); 177 l &= ~OTG_A_BUSREQ; 178 omap_writel(l, OTG_CTRL); 179 local_irq_restore(flags); 180 } 181 182 #endif 183 184 /*-------------------------------------------------------------------------*/ 185 186 static int ohci_omap_reset(struct usb_hcd *hcd) 187 { 188 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 189 struct omap_usb_config *config = dev_get_platdata(hcd->self.controller); 190 struct ohci_omap_priv *priv = hcd_to_ohci_omap_priv(hcd); 191 int need_transceiver = (config->otg != 0); 192 int ret; 193 194 dev_dbg(hcd->self.controller, "starting USB Controller\n"); 195 196 if (config->otg) { 197 hcd->self.otg_port = config->otg; 198 /* default/minimum OTG power budget: 8 mA */ 199 hcd->power_budget = 8; 200 } 201 202 /* boards can use OTG transceivers in non-OTG modes */ 203 need_transceiver = need_transceiver 204 || machine_is_omap_h2() || machine_is_omap_h3(); 205 206 /* XXX OMAP16xx only */ 207 if (config->ocpi_enable) 208 config->ocpi_enable(); 209 210 #ifdef CONFIG_USB_OTG 211 if (need_transceiver) { 212 hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2); 213 if (!IS_ERR_OR_NULL(hcd->usb_phy)) { 214 int status = otg_set_host(hcd->usb_phy->otg, 215 &ohci_to_hcd(ohci)->self); 216 dev_dbg(hcd->self.controller, "init %s phy, status %d\n", 217 hcd->usb_phy->label, status); 218 if (status) { 219 usb_put_phy(hcd->usb_phy); 220 return status; 221 } 222 } else { 223 return -EPROBE_DEFER; 224 } 225 hcd->skip_phy_initialization = 1; 226 ohci->start_hnp = start_hnp; 227 } 228 #endif 229 230 omap_ohci_clock_power(priv, 1); 231 232 if (cpu_is_omap15xx()) { 233 omap_1510_local_bus_power(1); 234 omap_1510_local_bus_init(); 235 } 236 237 ret = ohci_setup(hcd); 238 if (ret < 0) 239 return ret; 240 241 if (config->otg || config->rwc) { 242 ohci->hc_control = OHCI_CTRL_RWC; 243 writel(OHCI_CTRL_RWC, &ohci->regs->control); 244 } 245 246 /* board-specific power switching and overcurrent support */ 247 if (machine_is_omap_osk() || machine_is_omap_innovator()) { 248 u32 rh = roothub_a (ohci); 249 250 /* power switching (ganged by default) */ 251 rh &= ~RH_A_NPS; 252 253 /* TPS2045 switch for internal transceiver (port 1) */ 254 if (machine_is_omap_osk()) { 255 ohci_to_hcd(ohci)->power_budget = 250; 256 257 rh &= ~RH_A_NOCP; 258 259 /* gpio9 for overcurrent detction */ 260 omap_cfg_reg(W8_1610_GPIO9); 261 262 /* for paranoia's sake: disable USB.PUEN */ 263 omap_cfg_reg(W4_USB_HIGHZ); 264 } 265 ohci_writel(ohci, rh, &ohci->regs->roothub.a); 266 ohci->flags &= ~OHCI_QUIRK_HUB_POWER; 267 } else if (machine_is_nokia770()) { 268 /* We require a self-powered hub, which should have 269 * plenty of power. */ 270 ohci_to_hcd(ohci)->power_budget = 0; 271 } 272 273 /* FIXME hub_wq hub requests should manage power switching */ 274 omap_ohci_transceiver_power(priv, 1); 275 276 /* board init will have already handled HMC and mux setup. 277 * any external transceiver should already be initialized 278 * too, so all configured ports use the right signaling now. 279 */ 280 281 return 0; 282 } 283 284 /*-------------------------------------------------------------------------*/ 285 286 /** 287 * ohci_hcd_omap_probe - initialize OMAP-based HCDs 288 * Context: !in_interrupt() 289 * 290 * Allocates basic resources for this USB host controller, and 291 * then invokes the start() method for the HCD associated with it 292 * through the hotplug entry's driver_data. 293 */ 294 static int ohci_hcd_omap_probe(struct platform_device *pdev) 295 { 296 int retval, irq; 297 struct usb_hcd *hcd = 0; 298 struct ohci_omap_priv *priv; 299 300 if (pdev->num_resources != 2) { 301 dev_err(&pdev->dev, "invalid num_resources: %i\n", 302 pdev->num_resources); 303 return -ENODEV; 304 } 305 306 if (pdev->resource[0].flags != IORESOURCE_MEM 307 || pdev->resource[1].flags != IORESOURCE_IRQ) { 308 dev_err(&pdev->dev, "invalid resource type\n"); 309 return -ENODEV; 310 } 311 312 hcd = usb_create_hcd(&ohci_omap_hc_driver, &pdev->dev, 313 dev_name(&pdev->dev)); 314 if (!hcd) 315 return -ENOMEM; 316 317 hcd->rsrc_start = pdev->resource[0].start; 318 hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; 319 priv = hcd_to_ohci_omap_priv(hcd); 320 321 /* Obtain two optional GPIO lines */ 322 priv->power = devm_gpiod_get_optional(&pdev->dev, "power", GPIOD_ASIS); 323 if (IS_ERR(priv->power)) { 324 retval = PTR_ERR(priv->power); 325 goto err_put_hcd; 326 } 327 if (priv->power) 328 gpiod_set_consumer_name(priv->power, "OHCI power"); 329 330 /* 331 * This "overcurrent" GPIO line isn't really used in the code, 332 * but has a designated hardware function. 333 * TODO: implement proper overcurrent handling. 334 */ 335 priv->overcurrent = devm_gpiod_get_optional(&pdev->dev, "overcurrent", 336 GPIOD_IN); 337 if (IS_ERR(priv->overcurrent)) { 338 retval = PTR_ERR(priv->overcurrent); 339 goto err_put_hcd; 340 } 341 if (priv->overcurrent) 342 gpiod_set_consumer_name(priv->overcurrent, "OHCI overcurrent"); 343 344 priv->usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck"); 345 if (IS_ERR(priv->usb_host_ck)) { 346 retval = PTR_ERR(priv->usb_host_ck); 347 goto err_put_hcd; 348 } 349 350 if (!cpu_is_omap15xx()) 351 priv->usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck"); 352 else 353 priv->usb_dc_ck = clk_get(&pdev->dev, "lb_ck"); 354 355 if (IS_ERR(priv->usb_dc_ck)) { 356 retval = PTR_ERR(priv->usb_dc_ck); 357 goto err_put_host_ck; 358 } 359 360 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { 361 dev_dbg(&pdev->dev, "request_mem_region failed\n"); 362 retval = -EBUSY; 363 goto err_put_dc_ck; 364 } 365 366 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); 367 if (!hcd->regs) { 368 dev_err(&pdev->dev, "can't ioremap OHCI HCD\n"); 369 retval = -ENOMEM; 370 goto err2; 371 } 372 373 irq = platform_get_irq(pdev, 0); 374 if (irq < 0) { 375 retval = -ENXIO; 376 goto err3; 377 } 378 retval = usb_add_hcd(hcd, irq, 0); 379 if (retval) 380 goto err3; 381 382 device_wakeup_enable(hcd->self.controller); 383 return 0; 384 err3: 385 iounmap(hcd->regs); 386 err2: 387 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 388 err_put_dc_ck: 389 clk_put(priv->usb_dc_ck); 390 err_put_host_ck: 391 clk_put(priv->usb_host_ck); 392 err_put_hcd: 393 usb_put_hcd(hcd); 394 return retval; 395 } 396 397 398 /* may be called with controller, bus, and devices active */ 399 400 /** 401 * ohci_hcd_omap_remove - shutdown processing for OMAP-based HCDs 402 * @dev: USB Host Controller being removed 403 * Context: !in_interrupt() 404 * 405 * Reverses the effect of ohci_hcd_omap_probe(), first invoking 406 * the HCD's stop() method. It is always called from a thread 407 * context, normally "rmmod", "apmd", or something similar. 408 */ 409 static int ohci_hcd_omap_remove(struct platform_device *pdev) 410 { 411 struct usb_hcd *hcd = platform_get_drvdata(pdev); 412 struct ohci_omap_priv *priv = hcd_to_ohci_omap_priv(hcd); 413 414 dev_dbg(hcd->self.controller, "stopping USB Controller\n"); 415 usb_remove_hcd(hcd); 416 omap_ohci_clock_power(priv, 0); 417 if (!IS_ERR_OR_NULL(hcd->usb_phy)) { 418 (void) otg_set_host(hcd->usb_phy->otg, 0); 419 usb_put_phy(hcd->usb_phy); 420 } 421 iounmap(hcd->regs); 422 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 423 clk_put(priv->usb_dc_ck); 424 clk_put(priv->usb_host_ck); 425 usb_put_hcd(hcd); 426 return 0; 427 } 428 429 /*-------------------------------------------------------------------------*/ 430 431 #ifdef CONFIG_PM 432 433 static int ohci_omap_suspend(struct platform_device *pdev, pm_message_t message) 434 { 435 struct usb_hcd *hcd = platform_get_drvdata(pdev); 436 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 437 struct ohci_omap_priv *priv = hcd_to_ohci_omap_priv(hcd); 438 bool do_wakeup = device_may_wakeup(&pdev->dev); 439 int ret; 440 441 if (time_before(jiffies, ohci->next_statechange)) 442 msleep(5); 443 ohci->next_statechange = jiffies; 444 445 ret = ohci_suspend(hcd, do_wakeup); 446 if (ret) 447 return ret; 448 449 omap_ohci_clock_power(priv, 0); 450 return ret; 451 } 452 453 static int ohci_omap_resume(struct platform_device *dev) 454 { 455 struct usb_hcd *hcd = platform_get_drvdata(dev); 456 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 457 struct ohci_omap_priv *priv = hcd_to_ohci_omap_priv(hcd); 458 459 if (time_before(jiffies, ohci->next_statechange)) 460 msleep(5); 461 ohci->next_statechange = jiffies; 462 463 omap_ohci_clock_power(priv, 1); 464 ohci_resume(hcd, false); 465 return 0; 466 } 467 468 #endif 469 470 /*-------------------------------------------------------------------------*/ 471 472 /* 473 * Driver definition to register with the OMAP bus 474 */ 475 static struct platform_driver ohci_hcd_omap_driver = { 476 .probe = ohci_hcd_omap_probe, 477 .remove = ohci_hcd_omap_remove, 478 .shutdown = usb_hcd_platform_shutdown, 479 #ifdef CONFIG_PM 480 .suspend = ohci_omap_suspend, 481 .resume = ohci_omap_resume, 482 #endif 483 .driver = { 484 .name = "ohci", 485 }, 486 }; 487 488 static const struct ohci_driver_overrides omap_overrides __initconst = { 489 .product_desc = "OMAP OHCI", 490 .reset = ohci_omap_reset, 491 .extra_priv_size = sizeof(struct ohci_omap_priv), 492 }; 493 494 static int __init ohci_omap_init(void) 495 { 496 if (usb_disabled()) 497 return -ENODEV; 498 499 pr_info("%s: " DRIVER_DESC "\n", hcd_name); 500 501 ohci_init_driver(&ohci_omap_hc_driver, &omap_overrides); 502 return platform_driver_register(&ohci_hcd_omap_driver); 503 } 504 module_init(ohci_omap_init); 505 506 static void __exit ohci_omap_cleanup(void) 507 { 508 platform_driver_unregister(&ohci_hcd_omap_driver); 509 } 510 module_exit(ohci_omap_cleanup); 511 512 MODULE_DESCRIPTION(DRIVER_DESC); 513 MODULE_ALIAS("platform:ohci"); 514 MODULE_LICENSE("GPL"); 515