1 /* 2 * OHCI HCD (Host Controller Driver) for USB. 3 * 4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 5 * (C) Copyright 2000-2005 David Brownell 6 * (C) Copyright 2002 Hewlett-Packard Company 7 * 8 * OMAP Bus Glue 9 * 10 * Modified for OMAP by Tony Lindgren <tony@atomide.com> 11 * Based on the 2.4 OMAP OHCI driver originally done by MontaVista Software Inc. 12 * and on ohci-sa1111.c by Christopher Hoover <ch@hpl.hp.com> 13 * 14 * This file is licenced under the GPL. 15 */ 16 17 #include <linux/clk.h> 18 #include <linux/dma-mapping.h> 19 #include <linux/err.h> 20 #include <linux/gpio.h> 21 #include <linux/io.h> 22 #include <linux/jiffies.h> 23 #include <linux/kernel.h> 24 #include <linux/module.h> 25 #include <linux/usb/otg.h> 26 #include <linux/platform_device.h> 27 #include <linux/signal.h> 28 #include <linux/usb.h> 29 #include <linux/usb/hcd.h> 30 31 #include "ohci.h" 32 33 #include <asm/io.h> 34 #include <asm/mach-types.h> 35 36 #include <mach/mux.h> 37 38 #include <mach/hardware.h> 39 #include <mach/irqs.h> 40 #include <mach/usb.h> 41 42 43 /* OMAP-1510 OHCI has its own MMU for DMA */ 44 #define OMAP1510_LB_MEMSIZE 32 /* Should be same as SDRAM size */ 45 #define OMAP1510_LB_CLOCK_DIV 0xfffec10c 46 #define OMAP1510_LB_MMU_CTL 0xfffec208 47 #define OMAP1510_LB_MMU_LCK 0xfffec224 48 #define OMAP1510_LB_MMU_LD_TLB 0xfffec228 49 #define OMAP1510_LB_MMU_CAM_H 0xfffec22c 50 #define OMAP1510_LB_MMU_CAM_L 0xfffec230 51 #define OMAP1510_LB_MMU_RAM_H 0xfffec234 52 #define OMAP1510_LB_MMU_RAM_L 0xfffec238 53 54 #define DRIVER_DESC "OHCI OMAP driver" 55 56 #ifdef CONFIG_TPS65010 57 #include <linux/i2c/tps65010.h> 58 #else 59 60 #define LOW 0 61 #define HIGH 1 62 63 #define GPIO1 1 64 65 static inline int tps65010_set_gpio_out_value(unsigned gpio, unsigned value) 66 { 67 return 0; 68 } 69 70 #endif 71 72 extern int usb_disabled(void); 73 extern int ocpi_enable(void); 74 75 static struct clk *usb_host_ck; 76 static struct clk *usb_dc_ck; 77 78 static const char hcd_name[] = "ohci-omap"; 79 static struct hc_driver __read_mostly ohci_omap_hc_driver; 80 81 static void omap_ohci_clock_power(int on) 82 { 83 if (on) { 84 clk_enable(usb_dc_ck); 85 clk_enable(usb_host_ck); 86 /* guesstimate for T5 == 1x 32K clock + APLL lock time */ 87 udelay(100); 88 } else { 89 clk_disable(usb_host_ck); 90 clk_disable(usb_dc_ck); 91 } 92 } 93 94 /* 95 * Board specific gang-switched transceiver power on/off. 96 * NOTE: OSK supplies power from DC, not battery. 97 */ 98 static int omap_ohci_transceiver_power(int on) 99 { 100 if (on) { 101 if (machine_is_omap_innovator() && cpu_is_omap1510()) 102 __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) 103 | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), 104 INNOVATOR_FPGA_CAM_USB_CONTROL); 105 else if (machine_is_omap_osk()) 106 tps65010_set_gpio_out_value(GPIO1, LOW); 107 } else { 108 if (machine_is_omap_innovator() && cpu_is_omap1510()) 109 __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) 110 & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), 111 INNOVATOR_FPGA_CAM_USB_CONTROL); 112 else if (machine_is_omap_osk()) 113 tps65010_set_gpio_out_value(GPIO1, HIGH); 114 } 115 116 return 0; 117 } 118 119 #ifdef CONFIG_ARCH_OMAP15XX 120 /* 121 * OMAP-1510 specific Local Bus clock on/off 122 */ 123 static int omap_1510_local_bus_power(int on) 124 { 125 if (on) { 126 omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL); 127 udelay(200); 128 } else { 129 omap_writel(0, OMAP1510_LB_MMU_CTL); 130 } 131 132 return 0; 133 } 134 135 /* 136 * OMAP-1510 specific Local Bus initialization 137 * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE. 138 * See also arch/mach-omap/memory.h for __virt_to_dma() and 139 * __dma_to_virt() which need to match with the physical 140 * Local Bus address below. 141 */ 142 static int omap_1510_local_bus_init(void) 143 { 144 unsigned int tlb; 145 unsigned long lbaddr, physaddr; 146 147 omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, 148 OMAP1510_LB_CLOCK_DIV); 149 150 /* Configure the Local Bus MMU table */ 151 for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) { 152 lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET; 153 physaddr = tlb * 0x00100000 + PHYS_OFFSET; 154 omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H); 155 omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, 156 OMAP1510_LB_MMU_CAM_L); 157 omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H); 158 omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L); 159 omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK); 160 omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB); 161 } 162 163 /* Enable the walking table */ 164 omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL); 165 udelay(200); 166 167 return 0; 168 } 169 #else 170 #define omap_1510_local_bus_power(x) {} 171 #define omap_1510_local_bus_init() {} 172 #endif 173 174 #ifdef CONFIG_USB_OTG 175 176 static void start_hnp(struct ohci_hcd *ohci) 177 { 178 struct usb_hcd *hcd = ohci_to_hcd(ohci); 179 const unsigned port = hcd->self.otg_port - 1; 180 unsigned long flags; 181 u32 l; 182 183 otg_start_hnp(hcd->phy->otg); 184 185 local_irq_save(flags); 186 hcd->phy->state = OTG_STATE_A_SUSPEND; 187 writel (RH_PS_PSS, &ohci->regs->roothub.portstatus [port]); 188 l = omap_readl(OTG_CTRL); 189 l &= ~OTG_A_BUSREQ; 190 omap_writel(l, OTG_CTRL); 191 local_irq_restore(flags); 192 } 193 194 #endif 195 196 /*-------------------------------------------------------------------------*/ 197 198 static int ohci_omap_reset(struct usb_hcd *hcd) 199 { 200 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 201 struct omap_usb_config *config = dev_get_platdata(hcd->self.controller); 202 int need_transceiver = (config->otg != 0); 203 int ret; 204 205 dev_dbg(hcd->self.controller, "starting USB Controller\n"); 206 207 if (config->otg) { 208 hcd->self.otg_port = config->otg; 209 /* default/minimum OTG power budget: 8 mA */ 210 hcd->power_budget = 8; 211 } 212 213 /* boards can use OTG transceivers in non-OTG modes */ 214 need_transceiver = need_transceiver 215 || machine_is_omap_h2() || machine_is_omap_h3(); 216 217 /* XXX OMAP16xx only */ 218 if (config->ocpi_enable) 219 config->ocpi_enable(); 220 221 #ifdef CONFIG_USB_OTG 222 if (need_transceiver) { 223 hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2); 224 if (!IS_ERR_OR_NULL(hcd->phy)) { 225 int status = otg_set_host(hcd->phy->otg, 226 &ohci_to_hcd(ohci)->self); 227 dev_dbg(hcd->self.controller, "init %s phy, status %d\n", 228 hcd->phy->label, status); 229 if (status) { 230 usb_put_phy(hcd->phy); 231 return status; 232 } 233 } else { 234 dev_err(hcd->self.controller, "can't find phy\n"); 235 return -ENODEV; 236 } 237 ohci->start_hnp = start_hnp; 238 } 239 #endif 240 241 omap_ohci_clock_power(1); 242 243 if (cpu_is_omap15xx()) { 244 omap_1510_local_bus_power(1); 245 omap_1510_local_bus_init(); 246 } 247 248 ret = ohci_setup(hcd); 249 if (ret < 0) 250 return ret; 251 252 if (config->otg || config->rwc) { 253 ohci->hc_control = OHCI_CTRL_RWC; 254 writel(OHCI_CTRL_RWC, &ohci->regs->control); 255 } 256 257 /* board-specific power switching and overcurrent support */ 258 if (machine_is_omap_osk() || machine_is_omap_innovator()) { 259 u32 rh = roothub_a (ohci); 260 261 /* power switching (ganged by default) */ 262 rh &= ~RH_A_NPS; 263 264 /* TPS2045 switch for internal transceiver (port 1) */ 265 if (machine_is_omap_osk()) { 266 ohci_to_hcd(ohci)->power_budget = 250; 267 268 rh &= ~RH_A_NOCP; 269 270 /* gpio9 for overcurrent detction */ 271 omap_cfg_reg(W8_1610_GPIO9); 272 gpio_request(9, "OHCI overcurrent"); 273 gpio_direction_input(9); 274 275 /* for paranoia's sake: disable USB.PUEN */ 276 omap_cfg_reg(W4_USB_HIGHZ); 277 } 278 ohci_writel(ohci, rh, &ohci->regs->roothub.a); 279 ohci->flags &= ~OHCI_QUIRK_HUB_POWER; 280 } else if (machine_is_nokia770()) { 281 /* We require a self-powered hub, which should have 282 * plenty of power. */ 283 ohci_to_hcd(ohci)->power_budget = 0; 284 } 285 286 /* FIXME khubd hub requests should manage power switching */ 287 omap_ohci_transceiver_power(1); 288 289 /* board init will have already handled HMC and mux setup. 290 * any external transceiver should already be initialized 291 * too, so all configured ports use the right signaling now. 292 */ 293 294 return 0; 295 } 296 297 /*-------------------------------------------------------------------------*/ 298 299 /** 300 * usb_hcd_omap_probe - initialize OMAP-based HCDs 301 * Context: !in_interrupt() 302 * 303 * Allocates basic resources for this USB host controller, and 304 * then invokes the start() method for the HCD associated with it 305 * through the hotplug entry's driver_data. 306 */ 307 static int usb_hcd_omap_probe (const struct hc_driver *driver, 308 struct platform_device *pdev) 309 { 310 int retval, irq; 311 struct usb_hcd *hcd = 0; 312 313 if (pdev->num_resources != 2) { 314 printk(KERN_ERR "hcd probe: invalid num_resources: %i\n", 315 pdev->num_resources); 316 return -ENODEV; 317 } 318 319 if (pdev->resource[0].flags != IORESOURCE_MEM 320 || pdev->resource[1].flags != IORESOURCE_IRQ) { 321 printk(KERN_ERR "hcd probe: invalid resource type\n"); 322 return -ENODEV; 323 } 324 325 usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck"); 326 if (IS_ERR(usb_host_ck)) 327 return PTR_ERR(usb_host_ck); 328 329 if (!cpu_is_omap15xx()) 330 usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck"); 331 else 332 usb_dc_ck = clk_get(&pdev->dev, "lb_ck"); 333 334 if (IS_ERR(usb_dc_ck)) { 335 clk_put(usb_host_ck); 336 return PTR_ERR(usb_dc_ck); 337 } 338 339 340 hcd = usb_create_hcd (driver, &pdev->dev, dev_name(&pdev->dev)); 341 if (!hcd) { 342 retval = -ENOMEM; 343 goto err0; 344 } 345 hcd->rsrc_start = pdev->resource[0].start; 346 hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; 347 348 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { 349 dev_dbg(&pdev->dev, "request_mem_region failed\n"); 350 retval = -EBUSY; 351 goto err1; 352 } 353 354 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); 355 if (!hcd->regs) { 356 dev_err(&pdev->dev, "can't ioremap OHCI HCD\n"); 357 retval = -ENOMEM; 358 goto err2; 359 } 360 361 irq = platform_get_irq(pdev, 0); 362 if (irq < 0) { 363 retval = -ENXIO; 364 goto err3; 365 } 366 retval = usb_add_hcd(hcd, irq, 0); 367 if (retval) 368 goto err3; 369 370 return 0; 371 err3: 372 iounmap(hcd->regs); 373 err2: 374 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 375 err1: 376 usb_put_hcd(hcd); 377 err0: 378 clk_put(usb_dc_ck); 379 clk_put(usb_host_ck); 380 return retval; 381 } 382 383 384 /* may be called with controller, bus, and devices active */ 385 386 /** 387 * usb_hcd_omap_remove - shutdown processing for OMAP-based HCDs 388 * @dev: USB Host Controller being removed 389 * Context: !in_interrupt() 390 * 391 * Reverses the effect of usb_hcd_omap_probe(), first invoking 392 * the HCD's stop() method. It is always called from a thread 393 * context, normally "rmmod", "apmd", or something similar. 394 */ 395 static inline void 396 usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) 397 { 398 dev_dbg(hcd->self.controller, "stopping USB Controller\n"); 399 usb_remove_hcd(hcd); 400 omap_ohci_clock_power(0); 401 if (!IS_ERR_OR_NULL(hcd->phy)) { 402 (void) otg_set_host(hcd->phy->otg, 0); 403 usb_put_phy(hcd->phy); 404 } 405 if (machine_is_omap_osk()) 406 gpio_free(9); 407 iounmap(hcd->regs); 408 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 409 usb_put_hcd(hcd); 410 clk_put(usb_dc_ck); 411 clk_put(usb_host_ck); 412 } 413 414 /*-------------------------------------------------------------------------*/ 415 416 static int ohci_hcd_omap_drv_probe(struct platform_device *dev) 417 { 418 return usb_hcd_omap_probe(&ohci_omap_hc_driver, dev); 419 } 420 421 static int ohci_hcd_omap_drv_remove(struct platform_device *dev) 422 { 423 struct usb_hcd *hcd = platform_get_drvdata(dev); 424 425 usb_hcd_omap_remove(hcd, dev); 426 427 return 0; 428 } 429 430 /*-------------------------------------------------------------------------*/ 431 432 #ifdef CONFIG_PM 433 434 static int ohci_omap_suspend(struct platform_device *pdev, pm_message_t message) 435 { 436 struct usb_hcd *hcd = platform_get_drvdata(pdev); 437 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 438 bool do_wakeup = device_may_wakeup(&pdev->dev); 439 int ret; 440 441 if (time_before(jiffies, ohci->next_statechange)) 442 msleep(5); 443 ohci->next_statechange = jiffies; 444 445 ret = ohci_suspend(hcd, do_wakeup); 446 if (ret) 447 return ret; 448 449 omap_ohci_clock_power(0); 450 return ret; 451 } 452 453 static int ohci_omap_resume(struct platform_device *dev) 454 { 455 struct usb_hcd *hcd = platform_get_drvdata(dev); 456 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 457 458 if (time_before(jiffies, ohci->next_statechange)) 459 msleep(5); 460 ohci->next_statechange = jiffies; 461 462 omap_ohci_clock_power(1); 463 ohci_resume(hcd, false); 464 return 0; 465 } 466 467 #endif 468 469 /*-------------------------------------------------------------------------*/ 470 471 /* 472 * Driver definition to register with the OMAP bus 473 */ 474 static struct platform_driver ohci_hcd_omap_driver = { 475 .probe = ohci_hcd_omap_drv_probe, 476 .remove = ohci_hcd_omap_drv_remove, 477 .shutdown = usb_hcd_platform_shutdown, 478 #ifdef CONFIG_PM 479 .suspend = ohci_omap_suspend, 480 .resume = ohci_omap_resume, 481 #endif 482 .driver = { 483 .owner = THIS_MODULE, 484 .name = "ohci", 485 }, 486 }; 487 488 static const struct ohci_driver_overrides omap_overrides __initconst = { 489 .product_desc = "OMAP OHCI", 490 .reset = ohci_omap_reset 491 }; 492 493 static int __init ohci_omap_init(void) 494 { 495 if (usb_disabled()) 496 return -ENODEV; 497 498 pr_info("%s: " DRIVER_DESC "\n", hcd_name); 499 500 ohci_init_driver(&ohci_omap_hc_driver, &omap_overrides); 501 return platform_driver_register(&ohci_hcd_omap_driver); 502 } 503 module_init(ohci_omap_init); 504 505 static void __exit ohci_omap_cleanup(void) 506 { 507 platform_driver_unregister(&ohci_hcd_omap_driver); 508 } 509 module_exit(ohci_omap_cleanup); 510 511 MODULE_DESCRIPTION(DRIVER_DESC); 512 MODULE_ALIAS("platform:ohci"); 513 MODULE_LICENSE("GPL"); 514