1 /* 2 * driver for NXP USB Host devices 3 * 4 * Currently supported OHCI host devices: 5 * - NXP LPC32xx 6 * 7 * Authors: Dmitry Chigirev <source@mvista.com> 8 * Vitaly Wool <vitalywool@gmail.com> 9 * 10 * register initialization is based on code examples provided by Philips 11 * Copyright (c) 2005 Koninklijke Philips Electronics N.V. 12 * 13 * NOTE: This driver does not have suspend/resume functionality 14 * This driver is intended for engineering development purposes only 15 * 16 * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under 17 * the terms of the GNU General Public License version 2. This program 18 * is licensed "as is" without any warranty of any kind, whether express 19 * or implied. 20 */ 21 #include <linux/clk.h> 22 #include <linux/dma-mapping.h> 23 #include <linux/io.h> 24 #include <linux/i2c.h> 25 #include <linux/kernel.h> 26 #include <linux/module.h> 27 #include <linux/of.h> 28 #include <linux/platform_device.h> 29 #include <linux/usb/isp1301.h> 30 #include <linux/usb.h> 31 #include <linux/usb/hcd.h> 32 33 #include "ohci.h" 34 35 36 #include <mach/hardware.h> 37 #include <asm/mach-types.h> 38 #include <asm/io.h> 39 40 #include <mach/platform.h> 41 #include <mach/irqs.h> 42 43 #define USB_CONFIG_BASE 0x31020000 44 #define PWRMAN_BASE 0x40004000 45 46 #define USB_CTRL IO_ADDRESS(PWRMAN_BASE + 0x64) 47 48 /* USB_CTRL bit defines */ 49 #define USB_SLAVE_HCLK_EN (1 << 24) 50 #define USB_DEV_NEED_CLK_EN (1 << 22) 51 #define USB_HOST_NEED_CLK_EN (1 << 21) 52 #define PAD_CONTROL_LAST_DRIVEN (1 << 19) 53 54 #define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110) 55 56 /* USB_OTG_STAT_CONTROL bit defines */ 57 #define TRANSPARENT_I2C_EN (1 << 7) 58 #define HOST_EN (1 << 0) 59 60 /* On LPC32xx, those are undefined */ 61 #ifndef start_int_set_falling_edge 62 #define start_int_set_falling_edge(irq) 63 #define start_int_set_rising_edge(irq) 64 #define start_int_ack(irq) 65 #define start_int_mask(irq) 66 #define start_int_umask(irq) 67 #endif 68 69 #define DRIVER_DESC "OHCI NXP driver" 70 71 static const char hcd_name[] = "ohci-nxp"; 72 static struct hc_driver __read_mostly ohci_nxp_hc_driver; 73 74 static struct i2c_client *isp1301_i2c_client; 75 76 extern int usb_disabled(void); 77 78 static struct clk *usb_pll_clk; 79 static struct clk *usb_dev_clk; 80 static struct clk *usb_otg_clk; 81 82 static void isp1301_configure_lpc32xx(void) 83 { 84 /* LPC32XX only supports DAT_SE0 USB mode */ 85 /* This sequence is important */ 86 87 /* Disable transparent UART mode first */ 88 i2c_smbus_write_byte_data(isp1301_i2c_client, 89 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), 90 MC1_UART_EN); 91 i2c_smbus_write_byte_data(isp1301_i2c_client, 92 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), 93 ~MC1_SPEED_REG); 94 i2c_smbus_write_byte_data(isp1301_i2c_client, 95 ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG); 96 i2c_smbus_write_byte_data(isp1301_i2c_client, 97 (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR), 98 ~0); 99 i2c_smbus_write_byte_data(isp1301_i2c_client, 100 ISP1301_I2C_MODE_CONTROL_2, 101 (MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL)); 102 i2c_smbus_write_byte_data(isp1301_i2c_client, 103 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0); 104 i2c_smbus_write_byte_data(isp1301_i2c_client, 105 ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0); 106 i2c_smbus_write_byte_data(isp1301_i2c_client, 107 ISP1301_I2C_OTG_CONTROL_1, 108 (OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); 109 i2c_smbus_write_byte_data(isp1301_i2c_client, 110 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), 111 (OTG1_DM_PULLUP | OTG1_DP_PULLUP)); 112 i2c_smbus_write_byte_data(isp1301_i2c_client, 113 ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0); 114 i2c_smbus_write_byte_data(isp1301_i2c_client, 115 ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, 116 ~0); 117 i2c_smbus_write_byte_data(isp1301_i2c_client, 118 ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); 119 120 /* Enable usb_need_clk clock after transceiver is initialized */ 121 __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL); 122 123 printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n", 124 i2c_smbus_read_word_data(isp1301_i2c_client, 0x00)); 125 printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n", 126 i2c_smbus_read_word_data(isp1301_i2c_client, 0x02)); 127 printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n", 128 i2c_smbus_read_word_data(isp1301_i2c_client, 0x14)); 129 } 130 131 static void isp1301_configure(void) 132 { 133 isp1301_configure_lpc32xx(); 134 } 135 136 static inline void isp1301_vbus_on(void) 137 { 138 i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1, 139 OTG1_VBUS_DRV); 140 } 141 142 static inline void isp1301_vbus_off(void) 143 { 144 i2c_smbus_write_byte_data(isp1301_i2c_client, 145 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, 146 OTG1_VBUS_DRV); 147 } 148 149 static void ohci_nxp_start_hc(void) 150 { 151 unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN; 152 __raw_writel(tmp, USB_OTG_STAT_CONTROL); 153 isp1301_vbus_on(); 154 } 155 156 static void ohci_nxp_stop_hc(void) 157 { 158 unsigned long tmp; 159 isp1301_vbus_off(); 160 tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN; 161 __raw_writel(tmp, USB_OTG_STAT_CONTROL); 162 } 163 164 static int ohci_hcd_nxp_probe(struct platform_device *pdev) 165 { 166 struct usb_hcd *hcd = 0; 167 const struct hc_driver *driver = &ohci_nxp_hc_driver; 168 struct resource *res; 169 int ret = 0, irq; 170 struct device_node *isp1301_node; 171 172 if (pdev->dev.of_node) { 173 isp1301_node = of_parse_phandle(pdev->dev.of_node, 174 "transceiver", 0); 175 } else { 176 isp1301_node = NULL; 177 } 178 179 isp1301_i2c_client = isp1301_get_client(isp1301_node); 180 if (!isp1301_i2c_client) { 181 return -EPROBE_DEFER; 182 } 183 184 ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); 185 if (ret) 186 goto fail_disable; 187 188 dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name); 189 if (usb_disabled()) { 190 dev_err(&pdev->dev, "USB is disabled\n"); 191 ret = -ENODEV; 192 goto fail_disable; 193 } 194 195 /* Enable AHB slave USB clock, needed for further USB clock control */ 196 __raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL); 197 198 /* Enable USB PLL */ 199 usb_pll_clk = clk_get(&pdev->dev, "ck_pll5"); 200 if (IS_ERR(usb_pll_clk)) { 201 dev_err(&pdev->dev, "failed to acquire USB PLL\n"); 202 ret = PTR_ERR(usb_pll_clk); 203 goto fail_pll; 204 } 205 206 ret = clk_enable(usb_pll_clk); 207 if (ret < 0) { 208 dev_err(&pdev->dev, "failed to start USB PLL\n"); 209 goto fail_pllen; 210 } 211 212 ret = clk_set_rate(usb_pll_clk, 48000); 213 if (ret < 0) { 214 dev_err(&pdev->dev, "failed to set USB clock rate\n"); 215 goto fail_rate; 216 } 217 218 /* Enable USB device clock */ 219 usb_dev_clk = clk_get(&pdev->dev, "ck_usbd"); 220 if (IS_ERR(usb_dev_clk)) { 221 dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); 222 ret = PTR_ERR(usb_dev_clk); 223 goto fail_dev; 224 } 225 226 ret = clk_enable(usb_dev_clk); 227 if (ret < 0) { 228 dev_err(&pdev->dev, "failed to start USB DEV Clock\n"); 229 goto fail_deven; 230 } 231 232 /* Enable USB otg clocks */ 233 usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg"); 234 if (IS_ERR(usb_otg_clk)) { 235 dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); 236 ret = PTR_ERR(usb_otg_clk); 237 goto fail_otg; 238 } 239 240 __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL); 241 242 ret = clk_enable(usb_otg_clk); 243 if (ret < 0) { 244 dev_err(&pdev->dev, "failed to start USB DEV Clock\n"); 245 goto fail_otgen; 246 } 247 248 isp1301_configure(); 249 250 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); 251 if (!hcd) { 252 dev_err(&pdev->dev, "Failed to allocate HC buffer\n"); 253 ret = -ENOMEM; 254 goto fail_hcd; 255 } 256 257 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 258 hcd->regs = devm_ioremap_resource(&pdev->dev, res); 259 if (IS_ERR(hcd->regs)) { 260 ret = PTR_ERR(hcd->regs); 261 goto fail_resource; 262 } 263 hcd->rsrc_start = res->start; 264 hcd->rsrc_len = resource_size(res); 265 266 irq = platform_get_irq(pdev, 0); 267 if (irq < 0) { 268 ret = -ENXIO; 269 goto fail_resource; 270 } 271 272 ohci_nxp_start_hc(); 273 platform_set_drvdata(pdev, hcd); 274 275 dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq); 276 ret = usb_add_hcd(hcd, irq, 0); 277 if (ret == 0) 278 return ret; 279 280 ohci_nxp_stop_hc(); 281 fail_resource: 282 usb_put_hcd(hcd); 283 fail_hcd: 284 clk_disable(usb_otg_clk); 285 fail_otgen: 286 clk_put(usb_otg_clk); 287 fail_otg: 288 clk_disable(usb_dev_clk); 289 fail_deven: 290 clk_put(usb_dev_clk); 291 fail_dev: 292 fail_rate: 293 clk_disable(usb_pll_clk); 294 fail_pllen: 295 clk_put(usb_pll_clk); 296 fail_pll: 297 fail_disable: 298 isp1301_i2c_client = NULL; 299 return ret; 300 } 301 302 static int ohci_hcd_nxp_remove(struct platform_device *pdev) 303 { 304 struct usb_hcd *hcd = platform_get_drvdata(pdev); 305 306 usb_remove_hcd(hcd); 307 ohci_nxp_stop_hc(); 308 usb_put_hcd(hcd); 309 clk_disable(usb_pll_clk); 310 clk_put(usb_pll_clk); 311 clk_disable(usb_dev_clk); 312 clk_put(usb_dev_clk); 313 i2c_unregister_device(isp1301_i2c_client); 314 isp1301_i2c_client = NULL; 315 316 return 0; 317 } 318 319 /* work with hotplug and coldplug */ 320 MODULE_ALIAS("platform:usb-ohci"); 321 322 #ifdef CONFIG_OF 323 static const struct of_device_id ohci_hcd_nxp_match[] = { 324 { .compatible = "nxp,ohci-nxp" }, 325 {}, 326 }; 327 MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match); 328 #endif 329 330 static struct platform_driver ohci_hcd_nxp_driver = { 331 .driver = { 332 .name = "usb-ohci", 333 .owner = THIS_MODULE, 334 .of_match_table = of_match_ptr(ohci_hcd_nxp_match), 335 }, 336 .probe = ohci_hcd_nxp_probe, 337 .remove = ohci_hcd_nxp_remove, 338 }; 339 340 static int __init ohci_nxp_init(void) 341 { 342 if (usb_disabled()) 343 return -ENODEV; 344 345 pr_info("%s: " DRIVER_DESC "\n", hcd_name); 346 347 ohci_init_driver(&ohci_nxp_hc_driver, NULL); 348 return platform_driver_register(&ohci_hcd_nxp_driver); 349 } 350 module_init(ohci_nxp_init); 351 352 static void __exit ohci_nxp_cleanup(void) 353 { 354 platform_driver_unregister(&ohci_hcd_nxp_driver); 355 } 356 module_exit(ohci_nxp_cleanup); 357 358 MODULE_DESCRIPTION(DRIVER_DESC); 359 MODULE_LICENSE("GPL v2"); 360