xref: /openbmc/linux/drivers/usb/host/ohci-nxp.c (revision 6db6b729)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * driver for NXP USB Host devices
4  *
5  * Currently supported OHCI host devices:
6  * - NXP LPC32xx
7  *
8  * Authors: Dmitry Chigirev <source@mvista.com>
9  *	    Vitaly Wool <vitalywool@gmail.com>
10  *
11  * register initialization is based on code examples provided by Philips
12  * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
13  *
14  * NOTE: This driver does not have suspend/resume functionality
15  * This driver is intended for engineering development purposes only
16  *
17  * 2005-2006 (c) MontaVista Software, Inc.
18  */
19 #include <linux/clk.h>
20 #include <linux/dma-mapping.h>
21 #include <linux/io.h>
22 #include <linux/i2c.h>
23 #include <linux/module.h>
24 #include <linux/of.h>
25 #include <linux/platform_device.h>
26 #include <linux/usb/isp1301.h>
27 #include <linux/usb.h>
28 #include <linux/usb/hcd.h>
29 
30 #include "ohci.h"
31 
32 #define USB_CONFIG_BASE		0x31020000
33 
34 /* USB_OTG_STAT_CONTROL bit defines */
35 #define TRANSPARENT_I2C_EN	(1 << 7)
36 #define HOST_EN			(1 << 0)
37 
38 /* On LPC32xx, those are undefined */
39 #ifndef start_int_set_falling_edge
40 #define start_int_set_falling_edge(irq)
41 #define start_int_set_rising_edge(irq)
42 #define start_int_ack(irq)
43 #define start_int_mask(irq)
44 #define start_int_umask(irq)
45 #endif
46 
47 #define DRIVER_DESC "OHCI NXP driver"
48 
49 static const char hcd_name[] = "ohci-nxp";
50 static struct hc_driver __read_mostly ohci_nxp_hc_driver;
51 
52 static struct i2c_client *isp1301_i2c_client;
53 
54 static struct clk *usb_host_clk;
55 
56 static void isp1301_configure_lpc32xx(void)
57 {
58 	/* LPC32XX only supports DAT_SE0 USB mode */
59 	/* This sequence is important */
60 
61 	/* Disable transparent UART mode first */
62 	i2c_smbus_write_byte_data(isp1301_i2c_client,
63 		(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
64 		MC1_UART_EN);
65 	i2c_smbus_write_byte_data(isp1301_i2c_client,
66 		(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
67 		~MC1_SPEED_REG);
68 	i2c_smbus_write_byte_data(isp1301_i2c_client,
69 				  ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
70 	i2c_smbus_write_byte_data(isp1301_i2c_client,
71 		  (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
72 		  ~0);
73 	i2c_smbus_write_byte_data(isp1301_i2c_client,
74 		ISP1301_I2C_MODE_CONTROL_2,
75 		(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
76 	i2c_smbus_write_byte_data(isp1301_i2c_client,
77 		(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
78 	i2c_smbus_write_byte_data(isp1301_i2c_client,
79 		ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
80 	i2c_smbus_write_byte_data(isp1301_i2c_client,
81 		ISP1301_I2C_OTG_CONTROL_1,
82 		(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
83 	i2c_smbus_write_byte_data(isp1301_i2c_client,
84 		(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
85 		(OTG1_DM_PULLUP | OTG1_DP_PULLUP));
86 	i2c_smbus_write_byte_data(isp1301_i2c_client,
87 		ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
88 	i2c_smbus_write_byte_data(isp1301_i2c_client,
89 		ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
90 		~0);
91 	i2c_smbus_write_byte_data(isp1301_i2c_client,
92 		ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
93 
94 	printk(KERN_INFO "ISP1301 Vendor ID  : 0x%04x\n",
95 	      i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
96 	printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
97 	      i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
98 	printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
99 	      i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
100 }
101 
102 static void isp1301_configure(void)
103 {
104 	isp1301_configure_lpc32xx();
105 }
106 
107 static inline void isp1301_vbus_on(void)
108 {
109 	i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1,
110 				  OTG1_VBUS_DRV);
111 }
112 
113 static inline void isp1301_vbus_off(void)
114 {
115 	i2c_smbus_write_byte_data(isp1301_i2c_client,
116 		ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
117 		OTG1_VBUS_DRV);
118 }
119 
120 static void ohci_nxp_start_hc(void)
121 {
122 	void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
123 	unsigned long tmp;
124 
125 	if (WARN_ON(!usb_otg_stat_control))
126 		return;
127 
128 	tmp = __raw_readl(usb_otg_stat_control) | HOST_EN;
129 
130 	__raw_writel(tmp, usb_otg_stat_control);
131 	isp1301_vbus_on();
132 
133 	iounmap(usb_otg_stat_control);
134 }
135 
136 static void ohci_nxp_stop_hc(void)
137 {
138 	void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
139 	unsigned long tmp;
140 
141 	if (WARN_ON(!usb_otg_stat_control))
142 		return;
143 
144 	isp1301_vbus_off();
145 	tmp = __raw_readl(usb_otg_stat_control) & ~HOST_EN;
146 	__raw_writel(tmp, usb_otg_stat_control);
147 
148 	iounmap(usb_otg_stat_control);
149 }
150 
151 static int ohci_hcd_nxp_probe(struct platform_device *pdev)
152 {
153 	struct usb_hcd *hcd = NULL;
154 	const struct hc_driver *driver = &ohci_nxp_hc_driver;
155 	struct resource *res;
156 	int ret = 0, irq;
157 	struct device_node *isp1301_node;
158 
159 	if (pdev->dev.of_node) {
160 		isp1301_node = of_parse_phandle(pdev->dev.of_node,
161 						"transceiver", 0);
162 	} else {
163 		isp1301_node = NULL;
164 	}
165 
166 	isp1301_i2c_client = isp1301_get_client(isp1301_node);
167 	of_node_put(isp1301_node);
168 	if (!isp1301_i2c_client)
169 		return -EPROBE_DEFER;
170 
171 	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
172 	if (ret)
173 		goto fail_disable;
174 
175 	dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
176 	if (usb_disabled()) {
177 		dev_err(&pdev->dev, "USB is disabled\n");
178 		ret = -ENODEV;
179 		goto fail_disable;
180 	}
181 
182 	/* Enable USB host clock */
183 	usb_host_clk = devm_clk_get(&pdev->dev, NULL);
184 	if (IS_ERR(usb_host_clk)) {
185 		dev_err(&pdev->dev, "failed to acquire USB OHCI clock\n");
186 		ret = PTR_ERR(usb_host_clk);
187 		goto fail_disable;
188 	}
189 
190 	ret = clk_prepare_enable(usb_host_clk);
191 	if (ret < 0) {
192 		dev_err(&pdev->dev, "failed to start USB OHCI clock\n");
193 		goto fail_disable;
194 	}
195 
196 	isp1301_configure();
197 
198 	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
199 	if (!hcd) {
200 		dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
201 		ret = -ENOMEM;
202 		goto fail_hcd;
203 	}
204 
205 	hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
206 	if (IS_ERR(hcd->regs)) {
207 		ret = PTR_ERR(hcd->regs);
208 		goto fail_resource;
209 	}
210 	hcd->rsrc_start = res->start;
211 	hcd->rsrc_len = resource_size(res);
212 
213 	irq = platform_get_irq(pdev, 0);
214 	if (irq < 0) {
215 		ret = -ENXIO;
216 		goto fail_resource;
217 	}
218 
219 	ohci_nxp_start_hc();
220 	platform_set_drvdata(pdev, hcd);
221 
222 	dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
223 	ret = usb_add_hcd(hcd, irq, 0);
224 	if (ret == 0) {
225 		device_wakeup_enable(hcd->self.controller);
226 		return ret;
227 	}
228 
229 	ohci_nxp_stop_hc();
230 fail_resource:
231 	usb_put_hcd(hcd);
232 fail_hcd:
233 	clk_disable_unprepare(usb_host_clk);
234 fail_disable:
235 	isp1301_i2c_client = NULL;
236 	return ret;
237 }
238 
239 static void ohci_hcd_nxp_remove(struct platform_device *pdev)
240 {
241 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
242 
243 	usb_remove_hcd(hcd);
244 	ohci_nxp_stop_hc();
245 	usb_put_hcd(hcd);
246 	clk_disable_unprepare(usb_host_clk);
247 	isp1301_i2c_client = NULL;
248 }
249 
250 /* work with hotplug and coldplug */
251 MODULE_ALIAS("platform:usb-ohci");
252 
253 #ifdef CONFIG_OF
254 static const struct of_device_id ohci_hcd_nxp_match[] = {
255 	{ .compatible = "nxp,ohci-nxp" },
256 	{},
257 };
258 MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match);
259 #endif
260 
261 static struct platform_driver ohci_hcd_nxp_driver = {
262 	.driver = {
263 		.name = "usb-ohci",
264 		.of_match_table = of_match_ptr(ohci_hcd_nxp_match),
265 	},
266 	.probe = ohci_hcd_nxp_probe,
267 	.remove_new = ohci_hcd_nxp_remove,
268 };
269 
270 static int __init ohci_nxp_init(void)
271 {
272 	if (usb_disabled())
273 		return -ENODEV;
274 
275 	ohci_init_driver(&ohci_nxp_hc_driver, NULL);
276 	return platform_driver_register(&ohci_hcd_nxp_driver);
277 }
278 module_init(ohci_nxp_init);
279 
280 static void __exit ohci_nxp_cleanup(void)
281 {
282 	platform_driver_unregister(&ohci_hcd_nxp_driver);
283 }
284 module_exit(ohci_nxp_cleanup);
285 
286 MODULE_DESCRIPTION(DRIVER_DESC);
287 MODULE_LICENSE("GPL v2");
288