1 /* 2 * OHCI HCD (Host Controller Driver) for USB. 3 * 4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 5 * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net> 6 * 7 * This file is licenced under GPL 8 */ 9 10 /*-------------------------------------------------------------------------*/ 11 12 /* 13 * OHCI Root Hub ... the nonsharable stuff 14 */ 15 16 #define dbg_port(hc,label,num,value) \ 17 ohci_dbg (hc, \ 18 "%s roothub.portstatus [%d] " \ 19 "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \ 20 label, num, temp, \ 21 (temp & RH_PS_PRSC) ? " PRSC" : "", \ 22 (temp & RH_PS_OCIC) ? " OCIC" : "", \ 23 (temp & RH_PS_PSSC) ? " PSSC" : "", \ 24 (temp & RH_PS_PESC) ? " PESC" : "", \ 25 (temp & RH_PS_CSC) ? " CSC" : "", \ 26 \ 27 (temp & RH_PS_LSDA) ? " LSDA" : "", \ 28 (temp & RH_PS_PPS) ? " PPS" : "", \ 29 (temp & RH_PS_PRS) ? " PRS" : "", \ 30 (temp & RH_PS_POCI) ? " POCI" : "", \ 31 (temp & RH_PS_PSS) ? " PSS" : "", \ 32 \ 33 (temp & RH_PS_PES) ? " PES" : "", \ 34 (temp & RH_PS_CCS) ? " CCS" : "" \ 35 ); 36 37 /*-------------------------------------------------------------------------*/ 38 39 #define OHCI_SCHED_ENABLES \ 40 (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE) 41 42 static void dl_done_list (struct ohci_hcd *); 43 static void finish_unlinks (struct ohci_hcd *, u16); 44 45 #ifdef CONFIG_PM 46 static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop) 47 __releases(ohci->lock) 48 __acquires(ohci->lock) 49 { 50 int status = 0; 51 52 ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); 53 switch (ohci->hc_control & OHCI_CTRL_HCFS) { 54 case OHCI_USB_RESUME: 55 ohci_dbg (ohci, "resume/suspend?\n"); 56 ohci->hc_control &= ~OHCI_CTRL_HCFS; 57 ohci->hc_control |= OHCI_USB_RESET; 58 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); 59 (void) ohci_readl (ohci, &ohci->regs->control); 60 /* FALL THROUGH */ 61 case OHCI_USB_RESET: 62 status = -EBUSY; 63 ohci_dbg (ohci, "needs reinit!\n"); 64 goto done; 65 case OHCI_USB_SUSPEND: 66 if (!ohci->autostop) { 67 ohci_dbg (ohci, "already suspended\n"); 68 goto done; 69 } 70 } 71 ohci_dbg (ohci, "%s root hub\n", 72 autostop ? "auto-stop" : "suspend"); 73 74 /* First stop any processing */ 75 if (!autostop && (ohci->hc_control & OHCI_SCHED_ENABLES)) { 76 ohci->hc_control &= ~OHCI_SCHED_ENABLES; 77 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); 78 ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); 79 ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrstatus); 80 81 /* sched disables take effect on the next frame, 82 * then the last WDH could take 6+ msec 83 */ 84 ohci_dbg (ohci, "stopping schedules ...\n"); 85 ohci->autostop = 0; 86 spin_unlock_irq (&ohci->lock); 87 msleep (8); 88 spin_lock_irq (&ohci->lock); 89 } 90 dl_done_list (ohci); 91 finish_unlinks (ohci, ohci_frame_no(ohci)); 92 93 /* maybe resume can wake root hub */ 94 if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) { 95 ohci->hc_control |= OHCI_CTRL_RWE; 96 } else { 97 ohci_writel(ohci, OHCI_INTR_RHSC | OHCI_INTR_RD, 98 &ohci->regs->intrdisable); 99 ohci->hc_control &= ~OHCI_CTRL_RWE; 100 } 101 102 /* Suspend hub ... this is the "global (to this bus) suspend" mode, 103 * which doesn't imply ports will first be individually suspended. 104 */ 105 ohci->hc_control &= ~OHCI_CTRL_HCFS; 106 ohci->hc_control |= OHCI_USB_SUSPEND; 107 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); 108 (void) ohci_readl (ohci, &ohci->regs->control); 109 110 /* no resumes until devices finish suspending */ 111 if (!autostop) { 112 ohci->next_statechange = jiffies + msecs_to_jiffies (5); 113 ohci->autostop = 0; 114 } 115 116 done: 117 return status; 118 } 119 120 static inline struct ed *find_head (struct ed *ed) 121 { 122 /* for bulk and control lists */ 123 while (ed->ed_prev) 124 ed = ed->ed_prev; 125 return ed; 126 } 127 128 /* caller has locked the root hub */ 129 static int ohci_rh_resume (struct ohci_hcd *ohci) 130 __releases(ohci->lock) 131 __acquires(ohci->lock) 132 { 133 struct usb_hcd *hcd = ohci_to_hcd (ohci); 134 u32 temp, enables; 135 int status = -EINPROGRESS; 136 int autostopped = ohci->autostop; 137 138 ohci->autostop = 0; 139 ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); 140 141 if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) { 142 /* this can happen after resuming a swsusp snapshot */ 143 if (hcd->state == HC_STATE_RESUMING) { 144 ohci_dbg (ohci, "BIOS/SMM active, control %03x\n", 145 ohci->hc_control); 146 status = -EBUSY; 147 /* this happens when pmcore resumes HC then root */ 148 } else { 149 ohci_dbg (ohci, "duplicate resume\n"); 150 status = 0; 151 } 152 } else switch (ohci->hc_control & OHCI_CTRL_HCFS) { 153 case OHCI_USB_SUSPEND: 154 ohci->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES); 155 ohci->hc_control |= OHCI_USB_RESUME; 156 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); 157 (void) ohci_readl (ohci, &ohci->regs->control); 158 ohci_dbg (ohci, "%s root hub\n", 159 autostopped ? "auto-start" : "resume"); 160 break; 161 case OHCI_USB_RESUME: 162 /* HCFS changes sometime after INTR_RD */ 163 ohci_dbg(ohci, "%swakeup root hub\n", 164 autostopped ? "auto-" : ""); 165 break; 166 case OHCI_USB_OPER: 167 /* this can happen after resuming a swsusp snapshot */ 168 ohci_dbg (ohci, "snapshot resume? reinit\n"); 169 status = -EBUSY; 170 break; 171 default: /* RESET, we lost power */ 172 ohci_dbg (ohci, "lost power\n"); 173 status = -EBUSY; 174 } 175 if (status == -EBUSY) { 176 if (!autostopped) { 177 spin_unlock_irq (&ohci->lock); 178 (void) ohci_init (ohci); 179 status = ohci_restart (ohci); 180 181 usb_root_hub_lost_power(hcd->self.root_hub); 182 183 spin_lock_irq (&ohci->lock); 184 } 185 return status; 186 } 187 if (status != -EINPROGRESS) 188 return status; 189 if (autostopped) 190 goto skip_resume; 191 spin_unlock_irq (&ohci->lock); 192 193 /* Some controllers (lucent erratum) need extra-long delays */ 194 msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1); 195 196 temp = ohci_readl (ohci, &ohci->regs->control); 197 temp &= OHCI_CTRL_HCFS; 198 if (temp != OHCI_USB_RESUME) { 199 ohci_err (ohci, "controller won't resume\n"); 200 spin_lock_irq(&ohci->lock); 201 return -EBUSY; 202 } 203 204 /* disable old schedule state, reinit from scratch */ 205 ohci_writel (ohci, 0, &ohci->regs->ed_controlhead); 206 ohci_writel (ohci, 0, &ohci->regs->ed_controlcurrent); 207 ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead); 208 ohci_writel (ohci, 0, &ohci->regs->ed_bulkcurrent); 209 ohci_writel (ohci, 0, &ohci->regs->ed_periodcurrent); 210 ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca); 211 212 /* Sometimes PCI D3 suspend trashes frame timings ... */ 213 periodic_reinit (ohci); 214 215 /* the following code is executed with ohci->lock held and 216 * irqs disabled if and only if autostopped is true 217 */ 218 219 skip_resume: 220 /* interrupts might have been disabled */ 221 ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable); 222 if (ohci->ed_rm_list) 223 ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable); 224 225 /* Then re-enable operations */ 226 ohci_writel (ohci, OHCI_USB_OPER, &ohci->regs->control); 227 (void) ohci_readl (ohci, &ohci->regs->control); 228 if (!autostopped) 229 msleep (3); 230 231 temp = ohci->hc_control; 232 temp &= OHCI_CTRL_RWC; 233 temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER; 234 ohci->hc_control = temp; 235 ohci_writel (ohci, temp, &ohci->regs->control); 236 (void) ohci_readl (ohci, &ohci->regs->control); 237 238 /* TRSMRCY */ 239 if (!autostopped) { 240 msleep (10); 241 spin_lock_irq (&ohci->lock); 242 } 243 /* now ohci->lock is always held and irqs are always disabled */ 244 245 /* keep it alive for more than ~5x suspend + resume costs */ 246 ohci->next_statechange = jiffies + STATECHANGE_DELAY; 247 248 /* maybe turn schedules back on */ 249 enables = 0; 250 temp = 0; 251 if (!ohci->ed_rm_list) { 252 if (ohci->ed_controltail) { 253 ohci_writel (ohci, 254 find_head (ohci->ed_controltail)->dma, 255 &ohci->regs->ed_controlhead); 256 enables |= OHCI_CTRL_CLE; 257 temp |= OHCI_CLF; 258 } 259 if (ohci->ed_bulktail) { 260 ohci_writel (ohci, find_head (ohci->ed_bulktail)->dma, 261 &ohci->regs->ed_bulkhead); 262 enables |= OHCI_CTRL_BLE; 263 temp |= OHCI_BLF; 264 } 265 } 266 if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs) 267 enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE; 268 if (enables) { 269 ohci_dbg (ohci, "restarting schedules ... %08x\n", enables); 270 ohci->hc_control |= enables; 271 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); 272 if (temp) 273 ohci_writel (ohci, temp, &ohci->regs->cmdstatus); 274 (void) ohci_readl (ohci, &ohci->regs->control); 275 } 276 277 return 0; 278 } 279 280 static int ohci_bus_suspend (struct usb_hcd *hcd) 281 { 282 struct ohci_hcd *ohci = hcd_to_ohci (hcd); 283 int rc; 284 285 spin_lock_irq (&ohci->lock); 286 287 if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) 288 rc = -ESHUTDOWN; 289 else 290 rc = ohci_rh_suspend (ohci, 0); 291 spin_unlock_irq (&ohci->lock); 292 return rc; 293 } 294 295 static int ohci_bus_resume (struct usb_hcd *hcd) 296 { 297 struct ohci_hcd *ohci = hcd_to_ohci (hcd); 298 int rc; 299 300 if (time_before (jiffies, ohci->next_statechange)) 301 msleep(5); 302 303 spin_lock_irq (&ohci->lock); 304 305 if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) 306 rc = -ESHUTDOWN; 307 else 308 rc = ohci_rh_resume (ohci); 309 spin_unlock_irq (&ohci->lock); 310 311 /* poll until we know a device is connected or we autostop */ 312 if (rc == 0) 313 usb_hcd_poll_rh_status(hcd); 314 return rc; 315 } 316 317 /* Carry out the final steps of resuming the controller device */ 318 static void ohci_finish_controller_resume(struct usb_hcd *hcd) 319 { 320 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 321 int port; 322 bool need_reinit = false; 323 324 /* See if the controller is already running or has been reset */ 325 ohci->hc_control = ohci_readl(ohci, &ohci->regs->control); 326 if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) { 327 need_reinit = true; 328 } else { 329 switch (ohci->hc_control & OHCI_CTRL_HCFS) { 330 case OHCI_USB_OPER: 331 case OHCI_USB_RESET: 332 need_reinit = true; 333 } 334 } 335 336 /* If needed, reinitialize and suspend the root hub */ 337 if (need_reinit) { 338 spin_lock_irq(&ohci->lock); 339 hcd->state = HC_STATE_RESUMING; 340 ohci_rh_resume(ohci); 341 hcd->state = HC_STATE_QUIESCING; 342 ohci_rh_suspend(ohci, 0); 343 hcd->state = HC_STATE_SUSPENDED; 344 spin_unlock_irq(&ohci->lock); 345 } 346 347 /* Normally just turn on port power and enable interrupts */ 348 else { 349 ohci_dbg(ohci, "powerup ports\n"); 350 for (port = 0; port < ohci->num_ports; port++) 351 ohci_writel(ohci, RH_PS_PPS, 352 &ohci->regs->roothub.portstatus[port]); 353 354 ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable); 355 ohci_readl(ohci, &ohci->regs->intrenable); 356 msleep(20); 357 } 358 359 usb_hcd_resume_root_hub(hcd); 360 } 361 362 /* Carry out polling-, autostop-, and autoresume-related state changes */ 363 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, 364 int any_connected, int rhsc_status) 365 { 366 int poll_rh = 1; 367 int rhsc_enable; 368 369 /* Some broken controllers never turn off RHSC in the interrupt 370 * status register. For their sake we won't re-enable RHSC 371 * interrupts if the interrupt bit is already active. 372 */ 373 rhsc_enable = ohci_readl(ohci, &ohci->regs->intrenable) & 374 OHCI_INTR_RHSC; 375 376 switch (ohci->hc_control & OHCI_CTRL_HCFS) { 377 case OHCI_USB_OPER: 378 /* If no status changes are pending, enable RHSC interrupts. */ 379 if (!rhsc_enable && !rhsc_status && !changed) { 380 rhsc_enable = OHCI_INTR_RHSC; 381 ohci_writel(ohci, rhsc_enable, &ohci->regs->intrenable); 382 } 383 384 /* Keep on polling until we know a device is connected 385 * and RHSC is enabled, or until we autostop. 386 */ 387 if (!ohci->autostop) { 388 if (any_connected || 389 !device_may_wakeup(&ohci_to_hcd(ohci) 390 ->self.root_hub->dev)) { 391 if (rhsc_enable) 392 poll_rh = 0; 393 } else { 394 ohci->autostop = 1; 395 ohci->next_statechange = jiffies + HZ; 396 } 397 398 /* if no devices have been attached for one second, autostop */ 399 } else { 400 if (changed || any_connected) { 401 ohci->autostop = 0; 402 ohci->next_statechange = jiffies + 403 STATECHANGE_DELAY; 404 } else if (time_after_eq(jiffies, 405 ohci->next_statechange) 406 && !ohci->ed_rm_list 407 && !(ohci->hc_control & 408 OHCI_SCHED_ENABLES)) { 409 ohci_rh_suspend(ohci, 1); 410 if (rhsc_enable) 411 poll_rh = 0; 412 } 413 } 414 break; 415 416 case OHCI_USB_SUSPEND: 417 case OHCI_USB_RESUME: 418 /* if there is a port change, autostart or ask to be resumed */ 419 if (changed) { 420 if (ohci->autostop) 421 ohci_rh_resume(ohci); 422 else 423 usb_hcd_resume_root_hub(ohci_to_hcd(ohci)); 424 425 /* If remote wakeup is disabled, stop polling */ 426 } else if (!ohci->autostop && 427 !ohci_to_hcd(ohci)->self.root_hub-> 428 do_remote_wakeup) { 429 poll_rh = 0; 430 431 } else { 432 /* If no status changes are pending, 433 * enable RHSC interrupts 434 */ 435 if (!rhsc_enable && !rhsc_status) { 436 rhsc_enable = OHCI_INTR_RHSC; 437 ohci_writel(ohci, rhsc_enable, 438 &ohci->regs->intrenable); 439 } 440 /* Keep polling until RHSC is enabled */ 441 if (rhsc_enable) 442 poll_rh = 0; 443 } 444 break; 445 } 446 return poll_rh; 447 } 448 449 #else /* CONFIG_PM */ 450 451 static inline int ohci_rh_resume(struct ohci_hcd *ohci) 452 { 453 return 0; 454 } 455 456 /* Carry out polling-related state changes. 457 * autostop isn't used when CONFIG_PM is turned off. 458 */ 459 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, 460 int any_connected, int rhsc_status) 461 { 462 /* If RHSC is enabled, don't poll */ 463 if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC) 464 return 0; 465 466 /* If status changes are pending, continue polling. 467 * Conversely, if no status changes are pending but the RHSC 468 * status bit was set, then RHSC may be broken so continue polling. 469 */ 470 if (changed || rhsc_status) 471 return 1; 472 473 /* It's safe to re-enable RHSC interrupts */ 474 ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable); 475 return 0; 476 } 477 478 #endif /* CONFIG_PM */ 479 480 /*-------------------------------------------------------------------------*/ 481 482 /* build "status change" packet (one or two bytes) from HC registers */ 483 484 static int 485 ohci_hub_status_data (struct usb_hcd *hcd, char *buf) 486 { 487 struct ohci_hcd *ohci = hcd_to_ohci (hcd); 488 int i, changed = 0, length = 1; 489 int any_connected = 0; 490 int rhsc_status; 491 unsigned long flags; 492 493 spin_lock_irqsave (&ohci->lock, flags); 494 if (!HCD_HW_ACCESSIBLE(hcd)) 495 goto done; 496 497 /* undocumented erratum seen on at least rev D */ 498 if ((ohci->flags & OHCI_QUIRK_AMD756) 499 && (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) { 500 ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n", 501 ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP); 502 /* retry later; "should not happen" */ 503 goto done; 504 } 505 506 /* init status */ 507 if (roothub_status (ohci) & (RH_HS_LPSC | RH_HS_OCIC)) 508 buf [0] = changed = 1; 509 else 510 buf [0] = 0; 511 if (ohci->num_ports > 7) { 512 buf [1] = 0; 513 length++; 514 } 515 516 /* Clear the RHSC status flag before reading the port statuses */ 517 ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrstatus); 518 rhsc_status = ohci_readl(ohci, &ohci->regs->intrstatus) & 519 OHCI_INTR_RHSC; 520 521 /* look at each port */ 522 for (i = 0; i < ohci->num_ports; i++) { 523 u32 status = roothub_portstatus (ohci, i); 524 525 /* can't autostop if ports are connected */ 526 any_connected |= (status & RH_PS_CCS); 527 528 if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC 529 | RH_PS_OCIC | RH_PS_PRSC)) { 530 changed = 1; 531 if (i < 7) 532 buf [0] |= 1 << (i + 1); 533 else 534 buf [1] |= 1 << (i - 7); 535 } 536 } 537 538 if (ohci_root_hub_state_changes(ohci, changed, 539 any_connected, rhsc_status)) 540 set_bit(HCD_FLAG_POLL_RH, &hcd->flags); 541 else 542 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); 543 544 545 done: 546 spin_unlock_irqrestore (&ohci->lock, flags); 547 548 return changed ? length : 0; 549 } 550 551 /*-------------------------------------------------------------------------*/ 552 553 static void 554 ohci_hub_descriptor ( 555 struct ohci_hcd *ohci, 556 struct usb_hub_descriptor *desc 557 ) { 558 u32 rh = roothub_a (ohci); 559 u16 temp; 560 561 desc->bDescriptorType = 0x29; 562 desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24; 563 desc->bHubContrCurrent = 0; 564 565 desc->bNbrPorts = ohci->num_ports; 566 temp = 1 + (ohci->num_ports / 8); 567 desc->bDescLength = 7 + 2 * temp; 568 569 temp = 0; 570 if (rh & RH_A_NPS) /* no power switching? */ 571 temp |= 0x0002; 572 if (rh & RH_A_PSM) /* per-port power switching? */ 573 temp |= 0x0001; 574 if (rh & RH_A_NOCP) /* no overcurrent reporting? */ 575 temp |= 0x0010; 576 else if (rh & RH_A_OCPM) /* per-port overcurrent reporting? */ 577 temp |= 0x0008; 578 desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ohci, temp); 579 580 /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ 581 rh = roothub_b (ohci); 582 memset(desc->u.hs.DeviceRemovable, 0xff, 583 sizeof(desc->u.hs.DeviceRemovable)); 584 desc->u.hs.DeviceRemovable[0] = rh & RH_B_DR; 585 if (ohci->num_ports > 7) { 586 desc->u.hs.DeviceRemovable[1] = (rh & RH_B_DR) >> 8; 587 desc->u.hs.DeviceRemovable[2] = 0xff; 588 } else 589 desc->u.hs.DeviceRemovable[1] = 0xff; 590 } 591 592 /*-------------------------------------------------------------------------*/ 593 594 #ifdef CONFIG_USB_OTG 595 596 static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port) 597 { 598 struct ohci_hcd *ohci = hcd_to_ohci (hcd); 599 u32 status; 600 601 if (!port) 602 return -EINVAL; 603 port--; 604 605 /* start port reset before HNP protocol times out */ 606 status = ohci_readl(ohci, &ohci->regs->roothub.portstatus [port]); 607 if (!(status & RH_PS_CCS)) 608 return -ENODEV; 609 610 /* khubd will finish the reset later */ 611 ohci_writel(ohci, RH_PS_PRS, &ohci->regs->roothub.portstatus [port]); 612 return 0; 613 } 614 615 #else 616 617 #define ohci_start_port_reset NULL 618 619 #endif 620 621 /*-------------------------------------------------------------------------*/ 622 623 624 /* See usb 7.1.7.5: root hubs must issue at least 50 msec reset signaling, 625 * not necessarily continuous ... to guard against resume signaling. 626 * The short timeout is safe for non-root hubs, and is backward-compatible 627 * with earlier Linux hosts. 628 */ 629 #ifdef CONFIG_USB_SUSPEND 630 #define PORT_RESET_MSEC 50 631 #else 632 #define PORT_RESET_MSEC 10 633 #endif 634 635 /* this timer value might be vendor-specific ... */ 636 #define PORT_RESET_HW_MSEC 10 637 638 /* wrap-aware logic morphed from <linux/jiffies.h> */ 639 #define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0) 640 641 /* called from some task, normally khubd */ 642 static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port) 643 { 644 __hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port]; 645 u32 temp = 0; 646 u16 now = ohci_readl(ohci, &ohci->regs->fmnumber); 647 u16 reset_done = now + PORT_RESET_MSEC; 648 int limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC); 649 650 /* build a "continuous enough" reset signal, with up to 651 * 3msec gap between pulses. scheduler HZ==100 must work; 652 * this might need to be deadline-scheduled. 653 */ 654 do { 655 int limit_2; 656 657 /* spin until any current reset finishes */ 658 limit_2 = PORT_RESET_HW_MSEC * 2; 659 while (--limit_2 >= 0) { 660 temp = ohci_readl (ohci, portstat); 661 /* handle e.g. CardBus eject */ 662 if (temp == ~(u32)0) 663 return -ESHUTDOWN; 664 if (!(temp & RH_PS_PRS)) 665 break; 666 udelay (500); 667 } 668 669 /* timeout (a hardware error) has been observed when 670 * EHCI sets CF while this driver is resetting a port; 671 * presumably other disconnect paths might do it too. 672 */ 673 if (limit_2 < 0) { 674 ohci_dbg(ohci, 675 "port[%d] reset timeout, stat %08x\n", 676 port, temp); 677 break; 678 } 679 680 if (!(temp & RH_PS_CCS)) 681 break; 682 if (temp & RH_PS_PRSC) 683 ohci_writel (ohci, RH_PS_PRSC, portstat); 684 685 /* start the next reset, sleep till it's probably done */ 686 ohci_writel (ohci, RH_PS_PRS, portstat); 687 msleep(PORT_RESET_HW_MSEC); 688 now = ohci_readl(ohci, &ohci->regs->fmnumber); 689 } while (tick_before(now, reset_done) && --limit_1 >= 0); 690 691 /* caller synchronizes using PRSC ... and handles PRS 692 * still being set when this returns. 693 */ 694 695 return 0; 696 } 697 698 static int ohci_hub_control ( 699 struct usb_hcd *hcd, 700 u16 typeReq, 701 u16 wValue, 702 u16 wIndex, 703 char *buf, 704 u16 wLength 705 ) { 706 struct ohci_hcd *ohci = hcd_to_ohci (hcd); 707 int ports = ohci->num_ports; 708 u32 temp; 709 int retval = 0; 710 711 if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) 712 return -ESHUTDOWN; 713 714 switch (typeReq) { 715 case ClearHubFeature: 716 switch (wValue) { 717 case C_HUB_OVER_CURRENT: 718 ohci_writel (ohci, RH_HS_OCIC, 719 &ohci->regs->roothub.status); 720 case C_HUB_LOCAL_POWER: 721 break; 722 default: 723 goto error; 724 } 725 break; 726 case ClearPortFeature: 727 if (!wIndex || wIndex > ports) 728 goto error; 729 wIndex--; 730 731 switch (wValue) { 732 case USB_PORT_FEAT_ENABLE: 733 temp = RH_PS_CCS; 734 break; 735 case USB_PORT_FEAT_C_ENABLE: 736 temp = RH_PS_PESC; 737 break; 738 case USB_PORT_FEAT_SUSPEND: 739 temp = RH_PS_POCI; 740 break; 741 case USB_PORT_FEAT_C_SUSPEND: 742 temp = RH_PS_PSSC; 743 break; 744 case USB_PORT_FEAT_POWER: 745 temp = RH_PS_LSDA; 746 break; 747 case USB_PORT_FEAT_C_CONNECTION: 748 temp = RH_PS_CSC; 749 break; 750 case USB_PORT_FEAT_C_OVER_CURRENT: 751 temp = RH_PS_OCIC; 752 break; 753 case USB_PORT_FEAT_C_RESET: 754 temp = RH_PS_PRSC; 755 break; 756 default: 757 goto error; 758 } 759 ohci_writel (ohci, temp, 760 &ohci->regs->roothub.portstatus [wIndex]); 761 // ohci_readl (ohci, &ohci->regs->roothub.portstatus [wIndex]); 762 break; 763 case GetHubDescriptor: 764 ohci_hub_descriptor (ohci, (struct usb_hub_descriptor *) buf); 765 break; 766 case GetHubStatus: 767 temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE); 768 put_unaligned_le32(temp, buf); 769 break; 770 case GetPortStatus: 771 if (!wIndex || wIndex > ports) 772 goto error; 773 wIndex--; 774 temp = roothub_portstatus (ohci, wIndex); 775 put_unaligned_le32(temp, buf); 776 777 #ifndef OHCI_VERBOSE_DEBUG 778 if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ 779 #endif 780 dbg_port (ohci, "GetStatus", wIndex, temp); 781 break; 782 case SetHubFeature: 783 switch (wValue) { 784 case C_HUB_OVER_CURRENT: 785 // FIXME: this can be cleared, yes? 786 case C_HUB_LOCAL_POWER: 787 break; 788 default: 789 goto error; 790 } 791 break; 792 case SetPortFeature: 793 if (!wIndex || wIndex > ports) 794 goto error; 795 wIndex--; 796 switch (wValue) { 797 case USB_PORT_FEAT_SUSPEND: 798 #ifdef CONFIG_USB_OTG 799 if (hcd->self.otg_port == (wIndex + 1) 800 && hcd->self.b_hnp_enable) 801 ohci->start_hnp(ohci); 802 else 803 #endif 804 ohci_writel (ohci, RH_PS_PSS, 805 &ohci->regs->roothub.portstatus [wIndex]); 806 break; 807 case USB_PORT_FEAT_POWER: 808 ohci_writel (ohci, RH_PS_PPS, 809 &ohci->regs->roothub.portstatus [wIndex]); 810 break; 811 case USB_PORT_FEAT_RESET: 812 retval = root_port_reset (ohci, wIndex); 813 break; 814 default: 815 goto error; 816 } 817 break; 818 819 default: 820 error: 821 /* "protocol stall" on error */ 822 retval = -EPIPE; 823 } 824 return retval; 825 } 826 827