1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * OHCI HCD (Host Controller Driver) for USB. 4 * 5 * TI DA8xx (OMAP-L1x) Bus Glue 6 * 7 * Derived from: ohci-omap.c and ohci-s3c2410.c 8 * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com> 9 */ 10 11 #include <linux/clk.h> 12 #include <linux/io.h> 13 #include <linux/interrupt.h> 14 #include <linux/jiffies.h> 15 #include <linux/kernel.h> 16 #include <linux/module.h> 17 #include <linux/platform_device.h> 18 #include <linux/phy/phy.h> 19 #include <linux/platform_data/usb-davinci.h> 20 #include <linux/regulator/consumer.h> 21 #include <linux/usb.h> 22 #include <linux/usb/hcd.h> 23 #include <asm/unaligned.h> 24 25 #include "ohci.h" 26 27 #define DRIVER_DESC "DA8XX" 28 #define DRV_NAME "ohci-da8xx" 29 30 static struct hc_driver __read_mostly ohci_da8xx_hc_driver; 31 32 static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, 33 u16 wValue, u16 wIndex, char *buf, u16 wLength); 34 static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); 35 36 struct da8xx_ohci_hcd { 37 struct usb_hcd *hcd; 38 struct clk *usb11_clk; 39 struct phy *usb11_phy; 40 struct regulator *vbus_reg; 41 struct notifier_block nb; 42 unsigned int reg_enabled; 43 }; 44 45 #define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv) 46 47 /* Over-current indicator change bitmask */ 48 static volatile u16 ocic_mask; 49 50 static int ohci_da8xx_enable(struct usb_hcd *hcd) 51 { 52 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); 53 int ret; 54 55 ret = clk_prepare_enable(da8xx_ohci->usb11_clk); 56 if (ret) 57 return ret; 58 59 ret = phy_init(da8xx_ohci->usb11_phy); 60 if (ret) 61 goto err_phy_init; 62 63 ret = phy_power_on(da8xx_ohci->usb11_phy); 64 if (ret) 65 goto err_phy_power_on; 66 67 return 0; 68 69 err_phy_power_on: 70 phy_exit(da8xx_ohci->usb11_phy); 71 err_phy_init: 72 clk_disable_unprepare(da8xx_ohci->usb11_clk); 73 74 return ret; 75 } 76 77 static void ohci_da8xx_disable(struct usb_hcd *hcd) 78 { 79 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); 80 81 phy_power_off(da8xx_ohci->usb11_phy); 82 phy_exit(da8xx_ohci->usb11_phy); 83 clk_disable_unprepare(da8xx_ohci->usb11_clk); 84 } 85 86 static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on) 87 { 88 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); 89 struct device *dev = hcd->self.controller; 90 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); 91 int ret; 92 93 if (hub && hub->set_power) 94 return hub->set_power(1, on); 95 96 if (!da8xx_ohci->vbus_reg) 97 return 0; 98 99 if (on && !da8xx_ohci->reg_enabled) { 100 ret = regulator_enable(da8xx_ohci->vbus_reg); 101 if (ret) { 102 dev_err(dev, "Failed to enable regulator: %d\n", ret); 103 return ret; 104 } 105 da8xx_ohci->reg_enabled = 1; 106 107 } else if (!on && da8xx_ohci->reg_enabled) { 108 ret = regulator_disable(da8xx_ohci->vbus_reg); 109 if (ret) { 110 dev_err(dev, "Failed to disable regulator: %d\n", ret); 111 return ret; 112 } 113 da8xx_ohci->reg_enabled = 0; 114 } 115 116 return 0; 117 } 118 119 static int ohci_da8xx_get_power(struct usb_hcd *hcd) 120 { 121 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); 122 struct device *dev = hcd->self.controller; 123 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); 124 125 if (hub && hub->get_power) 126 return hub->get_power(1); 127 128 if (da8xx_ohci->vbus_reg) 129 return regulator_is_enabled(da8xx_ohci->vbus_reg); 130 131 return 1; 132 } 133 134 static int ohci_da8xx_get_oci(struct usb_hcd *hcd) 135 { 136 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); 137 struct device *dev = hcd->self.controller; 138 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); 139 unsigned int flags; 140 int ret; 141 142 if (hub && hub->get_oci) 143 return hub->get_oci(1); 144 145 if (!da8xx_ohci->vbus_reg) 146 return 0; 147 148 ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags); 149 if (ret) 150 return ret; 151 152 if (flags & REGULATOR_ERROR_OVER_CURRENT) 153 return 1; 154 155 return 0; 156 } 157 158 static int ohci_da8xx_has_set_power(struct usb_hcd *hcd) 159 { 160 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); 161 struct device *dev = hcd->self.controller; 162 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); 163 164 if (hub && hub->set_power) 165 return 1; 166 167 if (da8xx_ohci->vbus_reg) 168 return 1; 169 170 return 0; 171 } 172 173 static int ohci_da8xx_has_oci(struct usb_hcd *hcd) 174 { 175 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); 176 struct device *dev = hcd->self.controller; 177 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); 178 179 if (hub && hub->get_oci) 180 return 1; 181 182 if (da8xx_ohci->vbus_reg) 183 return 1; 184 185 return 0; 186 } 187 188 static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd) 189 { 190 struct device *dev = hcd->self.controller; 191 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); 192 193 if (hub && hub->potpgt) 194 return 1; 195 196 return 0; 197 } 198 199 /* 200 * Handle the port over-current indicator change. 201 */ 202 static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub, 203 unsigned port) 204 { 205 ocic_mask |= 1 << port; 206 207 /* Once over-current is detected, the port needs to be powered down */ 208 if (hub->get_oci(port) > 0) 209 hub->set_power(port, 0); 210 } 211 212 static int ohci_da8xx_regulator_event(struct notifier_block *nb, 213 unsigned long event, void *data) 214 { 215 struct da8xx_ohci_hcd *da8xx_ohci = 216 container_of(nb, struct da8xx_ohci_hcd, nb); 217 218 if (event & REGULATOR_EVENT_OVER_CURRENT) { 219 ocic_mask |= 1 << 1; 220 ohci_da8xx_set_power(da8xx_ohci->hcd, 0); 221 } 222 223 return 0; 224 } 225 226 static int ohci_da8xx_register_notify(struct usb_hcd *hcd) 227 { 228 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); 229 struct device *dev = hcd->self.controller; 230 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); 231 int ret = 0; 232 233 if (hub && hub->ocic_notify) { 234 ret = hub->ocic_notify(ohci_da8xx_ocic_handler); 235 } else if (da8xx_ohci->vbus_reg) { 236 da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event; 237 ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg, 238 &da8xx_ohci->nb); 239 } 240 241 if (ret) 242 dev_err(dev, "Failed to register notifier: %d\n", ret); 243 244 return ret; 245 } 246 247 static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd) 248 { 249 struct device *dev = hcd->self.controller; 250 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); 251 252 if (hub && hub->ocic_notify) 253 hub->ocic_notify(NULL); 254 } 255 256 static int ohci_da8xx_reset(struct usb_hcd *hcd) 257 { 258 struct device *dev = hcd->self.controller; 259 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); 260 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 261 int result; 262 u32 rh_a; 263 264 dev_dbg(dev, "starting USB controller\n"); 265 266 result = ohci_da8xx_enable(hcd); 267 if (result < 0) 268 return result; 269 270 /* 271 * DA8xx only have 1 port connected to the pins but the HC root hub 272 * register A reports 2 ports, thus we'll have to override it... 273 */ 274 ohci->num_ports = 1; 275 276 result = ohci_setup(hcd); 277 if (result < 0) { 278 ohci_da8xx_disable(hcd); 279 return result; 280 } 281 282 /* 283 * Since we're providing a board-specific root hub port power control 284 * and over-current reporting, we have to override the HC root hub A 285 * register's default value, so that ohci_hub_control() could return 286 * the correct hub descriptor... 287 */ 288 rh_a = ohci_readl(ohci, &ohci->regs->roothub.a); 289 if (ohci_da8xx_has_set_power(hcd)) { 290 rh_a &= ~RH_A_NPS; 291 rh_a |= RH_A_PSM; 292 } 293 if (ohci_da8xx_has_oci(hcd)) { 294 rh_a &= ~RH_A_NOCP; 295 rh_a |= RH_A_OCPM; 296 } 297 if (ohci_da8xx_has_potpgt(hcd)) { 298 rh_a &= ~RH_A_POTPGT; 299 rh_a |= hub->potpgt << 24; 300 } 301 ohci_writel(ohci, rh_a, &ohci->regs->roothub.a); 302 303 return result; 304 } 305 306 /* 307 * Update the status data from the hub with the over-current indicator change. 308 */ 309 static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf) 310 { 311 int length = orig_ohci_hub_status_data(hcd, buf); 312 313 /* See if we have OCIC bit set on port 1 */ 314 if (ocic_mask & (1 << 1)) { 315 dev_dbg(hcd->self.controller, "over-current indicator change " 316 "on port 1\n"); 317 318 if (!length) 319 length = 1; 320 321 buf[0] |= 1 << 1; 322 } 323 return length; 324 } 325 326 /* 327 * Look at the control requests to the root hub and see if we need to override. 328 */ 329 static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, 330 u16 wIndex, char *buf, u16 wLength) 331 { 332 struct device *dev = hcd->self.controller; 333 int temp; 334 335 switch (typeReq) { 336 case GetPortStatus: 337 /* Check the port number */ 338 if (wIndex != 1) 339 break; 340 341 dev_dbg(dev, "GetPortStatus(%u)\n", wIndex); 342 343 temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1); 344 345 /* The port power status (PPS) bit defaults to 1 */ 346 if (!ohci_da8xx_get_power(hcd)) 347 temp &= ~RH_PS_PPS; 348 349 /* The port over-current indicator (POCI) bit is always 0 */ 350 if (ohci_da8xx_get_oci(hcd) > 0) 351 temp |= RH_PS_POCI; 352 353 /* The over-current indicator change (OCIC) bit is 0 too */ 354 if (ocic_mask & (1 << wIndex)) 355 temp |= RH_PS_OCIC; 356 357 put_unaligned(cpu_to_le32(temp), (__le32 *)buf); 358 return 0; 359 case SetPortFeature: 360 temp = 1; 361 goto check_port; 362 case ClearPortFeature: 363 temp = 0; 364 365 check_port: 366 /* Check the port number */ 367 if (wIndex != 1) 368 break; 369 370 switch (wValue) { 371 case USB_PORT_FEAT_POWER: 372 dev_dbg(dev, "%sPortFeature(%u): %s\n", 373 temp ? "Set" : "Clear", wIndex, "POWER"); 374 375 return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0; 376 case USB_PORT_FEAT_C_OVER_CURRENT: 377 dev_dbg(dev, "%sPortFeature(%u): %s\n", 378 temp ? "Set" : "Clear", wIndex, 379 "C_OVER_CURRENT"); 380 381 if (temp) 382 ocic_mask |= 1 << wIndex; 383 else 384 ocic_mask &= ~(1 << wIndex); 385 return 0; 386 } 387 } 388 389 return orig_ohci_hub_control(hcd, typeReq, wValue, 390 wIndex, buf, wLength); 391 } 392 393 /*-------------------------------------------------------------------------*/ 394 #ifdef CONFIG_OF 395 static const struct of_device_id da8xx_ohci_ids[] = { 396 { .compatible = "ti,da830-ohci" }, 397 { } 398 }; 399 MODULE_DEVICE_TABLE(of, da8xx_ohci_ids); 400 #endif 401 402 static int ohci_da8xx_probe(struct platform_device *pdev) 403 { 404 struct da8xx_ohci_hcd *da8xx_ohci; 405 struct usb_hcd *hcd; 406 struct resource *mem; 407 int error, irq; 408 hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev, 409 dev_name(&pdev->dev)); 410 if (!hcd) 411 return -ENOMEM; 412 413 da8xx_ohci = to_da8xx_ohci(hcd); 414 da8xx_ohci->hcd = hcd; 415 416 da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, "usb11"); 417 if (IS_ERR(da8xx_ohci->usb11_clk)) { 418 error = PTR_ERR(da8xx_ohci->usb11_clk); 419 if (error != -EPROBE_DEFER) 420 dev_err(&pdev->dev, "Failed to get clock.\n"); 421 goto err; 422 } 423 424 da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy"); 425 if (IS_ERR(da8xx_ohci->usb11_phy)) { 426 error = PTR_ERR(da8xx_ohci->usb11_phy); 427 if (error != -EPROBE_DEFER) 428 dev_err(&pdev->dev, "Failed to get phy.\n"); 429 goto err; 430 } 431 432 da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus"); 433 if (IS_ERR(da8xx_ohci->vbus_reg)) { 434 error = PTR_ERR(da8xx_ohci->vbus_reg); 435 if (error == -ENODEV) { 436 da8xx_ohci->vbus_reg = NULL; 437 } else if (error == -EPROBE_DEFER) { 438 goto err; 439 } else { 440 dev_err(&pdev->dev, "Failed to get regulator\n"); 441 goto err; 442 } 443 } 444 445 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 446 hcd->regs = devm_ioremap_resource(&pdev->dev, mem); 447 if (IS_ERR(hcd->regs)) { 448 error = PTR_ERR(hcd->regs); 449 goto err; 450 } 451 hcd->rsrc_start = mem->start; 452 hcd->rsrc_len = resource_size(mem); 453 454 irq = platform_get_irq(pdev, 0); 455 if (irq < 0) { 456 error = -ENODEV; 457 goto err; 458 } 459 460 error = usb_add_hcd(hcd, irq, 0); 461 if (error) 462 goto err; 463 464 device_wakeup_enable(hcd->self.controller); 465 466 error = ohci_da8xx_register_notify(hcd); 467 if (error) 468 goto err_remove_hcd; 469 470 return 0; 471 472 err_remove_hcd: 473 usb_remove_hcd(hcd); 474 err: 475 usb_put_hcd(hcd); 476 return error; 477 } 478 479 static int ohci_da8xx_remove(struct platform_device *pdev) 480 { 481 struct usb_hcd *hcd = platform_get_drvdata(pdev); 482 483 ohci_da8xx_unregister_notify(hcd); 484 usb_remove_hcd(hcd); 485 usb_put_hcd(hcd); 486 487 return 0; 488 } 489 490 #ifdef CONFIG_PM 491 static int ohci_da8xx_suspend(struct platform_device *pdev, 492 pm_message_t message) 493 { 494 struct usb_hcd *hcd = platform_get_drvdata(pdev); 495 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 496 bool do_wakeup = device_may_wakeup(&pdev->dev); 497 int ret; 498 499 500 if (time_before(jiffies, ohci->next_statechange)) 501 msleep(5); 502 ohci->next_statechange = jiffies; 503 504 ret = ohci_suspend(hcd, do_wakeup); 505 if (ret) 506 return ret; 507 508 ohci_da8xx_disable(hcd); 509 hcd->state = HC_STATE_SUSPENDED; 510 511 return ret; 512 } 513 514 static int ohci_da8xx_resume(struct platform_device *dev) 515 { 516 struct usb_hcd *hcd = platform_get_drvdata(dev); 517 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 518 int ret; 519 520 if (time_before(jiffies, ohci->next_statechange)) 521 msleep(5); 522 ohci->next_statechange = jiffies; 523 524 ret = ohci_da8xx_enable(hcd); 525 if (ret) 526 return ret; 527 528 ohci_resume(hcd, false); 529 530 return 0; 531 } 532 #endif 533 534 static const struct ohci_driver_overrides da8xx_overrides __initconst = { 535 .reset = ohci_da8xx_reset, 536 .extra_priv_size = sizeof(struct da8xx_ohci_hcd), 537 }; 538 539 /* 540 * Driver definition to register with platform structure. 541 */ 542 static struct platform_driver ohci_hcd_da8xx_driver = { 543 .probe = ohci_da8xx_probe, 544 .remove = ohci_da8xx_remove, 545 .shutdown = usb_hcd_platform_shutdown, 546 #ifdef CONFIG_PM 547 .suspend = ohci_da8xx_suspend, 548 .resume = ohci_da8xx_resume, 549 #endif 550 .driver = { 551 .name = DRV_NAME, 552 .of_match_table = of_match_ptr(da8xx_ohci_ids), 553 }, 554 }; 555 556 static int __init ohci_da8xx_init(void) 557 { 558 559 if (usb_disabled()) 560 return -ENODEV; 561 562 pr_info("%s: " DRIVER_DESC "\n", DRV_NAME); 563 ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides); 564 565 /* 566 * The Davinci da8xx HW has some unusual quirks, which require 567 * da8xx-specific workarounds. We override certain hc_driver 568 * functions here to achieve that. We explicitly do not enhance 569 * ohci_driver_overrides to allow this more easily, since this 570 * is an unusual case, and we don't want to encourage others to 571 * override these functions by making it too easy. 572 */ 573 574 orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control; 575 orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data; 576 577 ohci_da8xx_hc_driver.hub_status_data = ohci_da8xx_hub_status_data; 578 ohci_da8xx_hc_driver.hub_control = ohci_da8xx_hub_control; 579 580 return platform_driver_register(&ohci_hcd_da8xx_driver); 581 } 582 module_init(ohci_da8xx_init); 583 584 static void __exit ohci_da8xx_exit(void) 585 { 586 platform_driver_unregister(&ohci_hcd_da8xx_driver); 587 } 588 module_exit(ohci_da8xx_exit); 589 MODULE_DESCRIPTION(DRIVER_DESC); 590 MODULE_LICENSE("GPL"); 591 MODULE_ALIAS("platform:" DRV_NAME); 592