xref: /openbmc/linux/drivers/usb/host/ehci.h (revision a09d2831)
1 /*
2  * Copyright (c) 2001-2002 by David Brownell
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms of the GNU General Public License as published by the
6  * Free Software Foundation; either version 2 of the License, or (at your
7  * option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful, but
10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
12  * for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software Foundation,
16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17  */
18 
19 #ifndef __LINUX_EHCI_HCD_H
20 #define __LINUX_EHCI_HCD_H
21 
22 /* definitions used for the EHCI driver */
23 
24 /*
25  * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
26  * __leXX (normally) or __beXX (given EHCI_BIG_ENDIAN_DESC), depending on
27  * the host controller implementation.
28  *
29  * To facilitate the strongest possible byte-order checking from "sparse"
30  * and so on, we use __leXX unless that's not practical.
31  */
32 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
33 typedef __u32 __bitwise __hc32;
34 typedef __u16 __bitwise __hc16;
35 #else
36 #define __hc32	__le32
37 #define __hc16	__le16
38 #endif
39 
40 /* statistics can be kept for tuning/monitoring */
41 struct ehci_stats {
42 	/* irq usage */
43 	unsigned long		normal;
44 	unsigned long		error;
45 	unsigned long		reclaim;
46 	unsigned long		lost_iaa;
47 
48 	/* termination of urbs from core */
49 	unsigned long		complete;
50 	unsigned long		unlink;
51 };
52 
53 /* ehci_hcd->lock guards shared data against other CPUs:
54  *   ehci_hcd:	async, reclaim, periodic (and shadow), ...
55  *   usb_host_endpoint: hcpriv
56  *   ehci_qh:	qh_next, qtd_list
57  *   ehci_qtd:	qtd_list
58  *
59  * Also, hold this lock when talking to HC registers or
60  * when updating hw_* fields in shared qh/qtd/... structures.
61  */
62 
63 #define	EHCI_MAX_ROOT_PORTS	15		/* see HCS_N_PORTS */
64 
65 struct ehci_hcd {			/* one per controller */
66 	/* glue to PCI and HCD framework */
67 	struct ehci_caps __iomem *caps;
68 	struct ehci_regs __iomem *regs;
69 	struct ehci_dbg_port __iomem *debug;
70 
71 	__u32			hcs_params;	/* cached register copy */
72 	spinlock_t		lock;
73 
74 	/* async schedule support */
75 	struct ehci_qh		*async;
76 	struct ehci_qh		*reclaim;
77 	unsigned		scanning : 1;
78 
79 	/* periodic schedule support */
80 #define	DEFAULT_I_TDPS		1024		/* some HCs can do less */
81 	unsigned		periodic_size;
82 	__hc32			*periodic;	/* hw periodic table */
83 	dma_addr_t		periodic_dma;
84 	unsigned		i_thresh;	/* uframes HC might cache */
85 
86 	union ehci_shadow	*pshadow;	/* mirror hw periodic table */
87 	int			next_uframe;	/* scan periodic, start here */
88 	unsigned		periodic_sched;	/* periodic activity count */
89 
90 	/* list of itds completed while clock_frame was still active */
91 	struct list_head	cached_itd_list;
92 	unsigned		clock_frame;
93 
94 	/* per root hub port */
95 	unsigned long		reset_done [EHCI_MAX_ROOT_PORTS];
96 
97 	/* bit vectors (one bit per port) */
98 	unsigned long		bus_suspended;		/* which ports were
99 			already suspended at the start of a bus suspend */
100 	unsigned long		companion_ports;	/* which ports are
101 			dedicated to the companion controller */
102 	unsigned long		owned_ports;		/* which ports are
103 			owned by the companion during a bus suspend */
104 	unsigned long		port_c_suspend;		/* which ports have
105 			the change-suspend feature turned on */
106 	unsigned long		suspended_ports;	/* which ports are
107 			suspended */
108 
109 	/* per-HC memory pools (could be per-bus, but ...) */
110 	struct dma_pool		*qh_pool;	/* qh per active urb */
111 	struct dma_pool		*qtd_pool;	/* one or more per qh */
112 	struct dma_pool		*itd_pool;	/* itd per iso urb */
113 	struct dma_pool		*sitd_pool;	/* sitd per split iso urb */
114 
115 	struct timer_list	iaa_watchdog;
116 	struct timer_list	watchdog;
117 	unsigned long		actions;
118 	unsigned		stamp;
119 	unsigned		random_frame;
120 	unsigned long		next_statechange;
121 	ktime_t			last_periodic_enable;
122 	u32			command;
123 
124 	/* SILICON QUIRKS */
125 	unsigned		no_selective_suspend:1;
126 	unsigned		has_fsl_port_bug:1; /* FreeScale */
127 	unsigned		big_endian_mmio:1;
128 	unsigned		big_endian_desc:1;
129 	unsigned		has_amcc_usb23:1;
130 	unsigned		need_io_watchdog:1;
131 	unsigned		broken_periodic:1;
132 
133 	/* required for usb32 quirk */
134 	#define OHCI_CTRL_HCFS          (3 << 6)
135 	#define OHCI_USB_OPER           (2 << 6)
136 	#define OHCI_USB_SUSPEND        (3 << 6)
137 
138 	#define OHCI_HCCTRL_OFFSET      0x4
139 	#define OHCI_HCCTRL_LEN         0x4
140 	__hc32			*ohci_hcctrl_reg;
141 	unsigned		has_hostpc:1;
142 
143 	u8			sbrn;		/* packed release number */
144 
145 	/* irq statistics */
146 #ifdef EHCI_STATS
147 	struct ehci_stats	stats;
148 #	define COUNT(x) do { (x)++; } while (0)
149 #else
150 #	define COUNT(x) do {} while (0)
151 #endif
152 
153 	/* debug files */
154 #ifdef DEBUG
155 	struct dentry		*debug_dir;
156 	struct dentry		*debug_async;
157 	struct dentry		*debug_periodic;
158 	struct dentry		*debug_registers;
159 #endif
160 };
161 
162 /* convert between an HCD pointer and the corresponding EHCI_HCD */
163 static inline struct ehci_hcd *hcd_to_ehci (struct usb_hcd *hcd)
164 {
165 	return (struct ehci_hcd *) (hcd->hcd_priv);
166 }
167 static inline struct usb_hcd *ehci_to_hcd (struct ehci_hcd *ehci)
168 {
169 	return container_of ((void *) ehci, struct usb_hcd, hcd_priv);
170 }
171 
172 
173 static inline void
174 iaa_watchdog_start(struct ehci_hcd *ehci)
175 {
176 	WARN_ON(timer_pending(&ehci->iaa_watchdog));
177 	mod_timer(&ehci->iaa_watchdog,
178 			jiffies + msecs_to_jiffies(EHCI_IAA_MSECS));
179 }
180 
181 static inline void iaa_watchdog_done(struct ehci_hcd *ehci)
182 {
183 	del_timer(&ehci->iaa_watchdog);
184 }
185 
186 enum ehci_timer_action {
187 	TIMER_IO_WATCHDOG,
188 	TIMER_ASYNC_SHRINK,
189 	TIMER_ASYNC_OFF,
190 };
191 
192 static inline void
193 timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
194 {
195 	clear_bit (action, &ehci->actions);
196 }
197 
198 static void free_cached_itd_list(struct ehci_hcd *ehci);
199 
200 /*-------------------------------------------------------------------------*/
201 
202 #include <linux/usb/ehci_def.h>
203 
204 /*-------------------------------------------------------------------------*/
205 
206 #define	QTD_NEXT(ehci, dma)	cpu_to_hc32(ehci, (u32)dma)
207 
208 /*
209  * EHCI Specification 0.95 Section 3.5
210  * QTD: describe data transfer components (buffer, direction, ...)
211  * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
212  *
213  * These are associated only with "QH" (Queue Head) structures,
214  * used with control, bulk, and interrupt transfers.
215  */
216 struct ehci_qtd {
217 	/* first part defined by EHCI spec */
218 	__hc32			hw_next;	/* see EHCI 3.5.1 */
219 	__hc32			hw_alt_next;    /* see EHCI 3.5.2 */
220 	__hc32			hw_token;       /* see EHCI 3.5.3 */
221 #define	QTD_TOGGLE	(1 << 31)	/* data toggle */
222 #define	QTD_LENGTH(tok)	(((tok)>>16) & 0x7fff)
223 #define	QTD_IOC		(1 << 15)	/* interrupt on complete */
224 #define	QTD_CERR(tok)	(((tok)>>10) & 0x3)
225 #define	QTD_PID(tok)	(((tok)>>8) & 0x3)
226 #define	QTD_STS_ACTIVE	(1 << 7)	/* HC may execute this */
227 #define	QTD_STS_HALT	(1 << 6)	/* halted on error */
228 #define	QTD_STS_DBE	(1 << 5)	/* data buffer error (in HC) */
229 #define	QTD_STS_BABBLE	(1 << 4)	/* device was babbling (qtd halted) */
230 #define	QTD_STS_XACT	(1 << 3)	/* device gave illegal response */
231 #define	QTD_STS_MMF	(1 << 2)	/* incomplete split transaction */
232 #define	QTD_STS_STS	(1 << 1)	/* split transaction state */
233 #define	QTD_STS_PING	(1 << 0)	/* issue PING? */
234 
235 #define ACTIVE_BIT(ehci)	cpu_to_hc32(ehci, QTD_STS_ACTIVE)
236 #define HALT_BIT(ehci)		cpu_to_hc32(ehci, QTD_STS_HALT)
237 #define STATUS_BIT(ehci)	cpu_to_hc32(ehci, QTD_STS_STS)
238 
239 	__hc32			hw_buf [5];        /* see EHCI 3.5.4 */
240 	__hc32			hw_buf_hi [5];        /* Appendix B */
241 
242 	/* the rest is HCD-private */
243 	dma_addr_t		qtd_dma;		/* qtd address */
244 	struct list_head	qtd_list;		/* sw qtd list */
245 	struct urb		*urb;			/* qtd's urb */
246 	size_t			length;			/* length of buffer */
247 } __attribute__ ((aligned (32)));
248 
249 /* mask NakCnt+T in qh->hw_alt_next */
250 #define QTD_MASK(ehci)	cpu_to_hc32 (ehci, ~0x1f)
251 
252 #define IS_SHORT_READ(token) (QTD_LENGTH (token) != 0 && QTD_PID (token) == 1)
253 
254 /*-------------------------------------------------------------------------*/
255 
256 /* type tag from {qh,itd,sitd,fstn}->hw_next */
257 #define Q_NEXT_TYPE(ehci,dma)	((dma) & cpu_to_hc32(ehci, 3 << 1))
258 
259 /*
260  * Now the following defines are not converted using the
261  * cpu_to_le32() macro anymore, since we have to support
262  * "dynamic" switching between be and le support, so that the driver
263  * can be used on one system with SoC EHCI controller using big-endian
264  * descriptors as well as a normal little-endian PCI EHCI controller.
265  */
266 /* values for that type tag */
267 #define Q_TYPE_ITD	(0 << 1)
268 #define Q_TYPE_QH	(1 << 1)
269 #define Q_TYPE_SITD	(2 << 1)
270 #define Q_TYPE_FSTN	(3 << 1)
271 
272 /* next async queue entry, or pointer to interrupt/periodic QH */
273 #define QH_NEXT(ehci,dma)	(cpu_to_hc32(ehci, (((u32)dma)&~0x01f)|Q_TYPE_QH))
274 
275 /* for periodic/async schedules and qtd lists, mark end of list */
276 #define EHCI_LIST_END(ehci)	cpu_to_hc32(ehci, 1) /* "null pointer" to hw */
277 
278 /*
279  * Entries in periodic shadow table are pointers to one of four kinds
280  * of data structure.  That's dictated by the hardware; a type tag is
281  * encoded in the low bits of the hardware's periodic schedule.  Use
282  * Q_NEXT_TYPE to get the tag.
283  *
284  * For entries in the async schedule, the type tag always says "qh".
285  */
286 union ehci_shadow {
287 	struct ehci_qh		*qh;		/* Q_TYPE_QH */
288 	struct ehci_itd		*itd;		/* Q_TYPE_ITD */
289 	struct ehci_sitd	*sitd;		/* Q_TYPE_SITD */
290 	struct ehci_fstn	*fstn;		/* Q_TYPE_FSTN */
291 	__hc32			*hw_next;	/* (all types) */
292 	void			*ptr;
293 };
294 
295 /*-------------------------------------------------------------------------*/
296 
297 /*
298  * EHCI Specification 0.95 Section 3.6
299  * QH: describes control/bulk/interrupt endpoints
300  * See Fig 3-7 "Queue Head Structure Layout".
301  *
302  * These appear in both the async and (for interrupt) periodic schedules.
303  */
304 
305 /* first part defined by EHCI spec */
306 struct ehci_qh_hw {
307 	__hc32			hw_next;	/* see EHCI 3.6.1 */
308 	__hc32			hw_info1;       /* see EHCI 3.6.2 */
309 #define	QH_HEAD		0x00008000
310 	__hc32			hw_info2;        /* see EHCI 3.6.2 */
311 #define	QH_SMASK	0x000000ff
312 #define	QH_CMASK	0x0000ff00
313 #define	QH_HUBADDR	0x007f0000
314 #define	QH_HUBPORT	0x3f800000
315 #define	QH_MULT		0xc0000000
316 	__hc32			hw_current;	/* qtd list - see EHCI 3.6.4 */
317 
318 	/* qtd overlay (hardware parts of a struct ehci_qtd) */
319 	__hc32			hw_qtd_next;
320 	__hc32			hw_alt_next;
321 	__hc32			hw_token;
322 	__hc32			hw_buf [5];
323 	__hc32			hw_buf_hi [5];
324 } __attribute__ ((aligned(32)));
325 
326 struct ehci_qh {
327 	struct ehci_qh_hw	*hw;
328 	/* the rest is HCD-private */
329 	dma_addr_t		qh_dma;		/* address of qh */
330 	union ehci_shadow	qh_next;	/* ptr to qh; or periodic */
331 	struct list_head	qtd_list;	/* sw qtd list */
332 	struct ehci_qtd		*dummy;
333 	struct ehci_qh		*reclaim;	/* next to reclaim */
334 
335 	struct ehci_hcd		*ehci;
336 
337 	/*
338 	 * Do NOT use atomic operations for QH refcounting. On some CPUs
339 	 * (PPC7448 for example), atomic operations cannot be performed on
340 	 * memory that is cache-inhibited (i.e. being used for DMA).
341 	 * Spinlocks are used to protect all QH fields.
342 	 */
343 	u32			refcount;
344 	unsigned		stamp;
345 
346 	u8			needs_rescan;	/* Dequeue during giveback */
347 	u8			qh_state;
348 #define	QH_STATE_LINKED		1		/* HC sees this */
349 #define	QH_STATE_UNLINK		2		/* HC may still see this */
350 #define	QH_STATE_IDLE		3		/* HC doesn't see this */
351 #define	QH_STATE_UNLINK_WAIT	4		/* LINKED and on reclaim q */
352 #define	QH_STATE_COMPLETING	5		/* don't touch token.HALT */
353 
354 	u8			xacterrs;	/* XactErr retry counter */
355 #define	QH_XACTERR_MAX		32		/* XactErr retry limit */
356 
357 	/* periodic schedule info */
358 	u8			usecs;		/* intr bandwidth */
359 	u8			gap_uf;		/* uframes split/csplit gap */
360 	u8			c_usecs;	/* ... split completion bw */
361 	u16			tt_usecs;	/* tt downstream bandwidth */
362 	unsigned short		period;		/* polling interval */
363 	unsigned short		start;		/* where polling starts */
364 #define NO_FRAME ((unsigned short)~0)			/* pick new start */
365 
366 	struct usb_device	*dev;		/* access to TT */
367 	unsigned		clearing_tt:1;	/* Clear-TT-Buf in progress */
368 };
369 
370 /*-------------------------------------------------------------------------*/
371 
372 /* description of one iso transaction (up to 3 KB data if highspeed) */
373 struct ehci_iso_packet {
374 	/* These will be copied to iTD when scheduling */
375 	u64			bufp;		/* itd->hw_bufp{,_hi}[pg] |= */
376 	__hc32			transaction;	/* itd->hw_transaction[i] |= */
377 	u8			cross;		/* buf crosses pages */
378 	/* for full speed OUT splits */
379 	u32			buf1;
380 };
381 
382 /* temporary schedule data for packets from iso urbs (both speeds)
383  * each packet is one logical usb transaction to the device (not TT),
384  * beginning at stream->next_uframe
385  */
386 struct ehci_iso_sched {
387 	struct list_head	td_list;
388 	unsigned		span;
389 	struct ehci_iso_packet	packet [0];
390 };
391 
392 /*
393  * ehci_iso_stream - groups all (s)itds for this endpoint.
394  * acts like a qh would, if EHCI had them for ISO.
395  */
396 struct ehci_iso_stream {
397 	/* first two fields match QH, but info1 == 0 */
398 	__hc32			hw_next;
399 	__hc32			hw_info1;
400 
401 	u32			refcount;
402 	u8			bEndpointAddress;
403 	u8			highspeed;
404 	u16			depth;		/* depth in uframes */
405 	struct list_head	td_list;	/* queued itds/sitds */
406 	struct list_head	free_list;	/* list of unused itds/sitds */
407 	struct usb_device	*udev;
408 	struct usb_host_endpoint *ep;
409 
410 	/* output of (re)scheduling */
411 	unsigned long		start;		/* jiffies */
412 	unsigned long		rescheduled;
413 	int			next_uframe;
414 	__hc32			splits;
415 
416 	/* the rest is derived from the endpoint descriptor,
417 	 * trusting urb->interval == f(epdesc->bInterval) and
418 	 * including the extra info for hw_bufp[0..2]
419 	 */
420 	u8			usecs, c_usecs;
421 	u16			interval;
422 	u16			tt_usecs;
423 	u16			maxp;
424 	u16			raw_mask;
425 	unsigned		bandwidth;
426 
427 	/* This is used to initialize iTD's hw_bufp fields */
428 	__hc32			buf0;
429 	__hc32			buf1;
430 	__hc32			buf2;
431 
432 	/* this is used to initialize sITD's tt info */
433 	__hc32			address;
434 };
435 
436 /*-------------------------------------------------------------------------*/
437 
438 /*
439  * EHCI Specification 0.95 Section 3.3
440  * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
441  *
442  * Schedule records for high speed iso xfers
443  */
444 struct ehci_itd {
445 	/* first part defined by EHCI spec */
446 	__hc32			hw_next;           /* see EHCI 3.3.1 */
447 	__hc32			hw_transaction [8]; /* see EHCI 3.3.2 */
448 #define EHCI_ISOC_ACTIVE        (1<<31)        /* activate transfer this slot */
449 #define EHCI_ISOC_BUF_ERR       (1<<30)        /* Data buffer error */
450 #define EHCI_ISOC_BABBLE        (1<<29)        /* babble detected */
451 #define EHCI_ISOC_XACTERR       (1<<28)        /* XactErr - transaction error */
452 #define	EHCI_ITD_LENGTH(tok)	(((tok)>>16) & 0x0fff)
453 #define	EHCI_ITD_IOC		(1 << 15)	/* interrupt on complete */
454 
455 #define ITD_ACTIVE(ehci)	cpu_to_hc32(ehci, EHCI_ISOC_ACTIVE)
456 
457 	__hc32			hw_bufp [7];	/* see EHCI 3.3.3 */
458 	__hc32			hw_bufp_hi [7];	/* Appendix B */
459 
460 	/* the rest is HCD-private */
461 	dma_addr_t		itd_dma;	/* for this itd */
462 	union ehci_shadow	itd_next;	/* ptr to periodic q entry */
463 
464 	struct urb		*urb;
465 	struct ehci_iso_stream	*stream;	/* endpoint's queue */
466 	struct list_head	itd_list;	/* list of stream's itds */
467 
468 	/* any/all hw_transactions here may be used by that urb */
469 	unsigned		frame;		/* where scheduled */
470 	unsigned		pg;
471 	unsigned		index[8];	/* in urb->iso_frame_desc */
472 } __attribute__ ((aligned (32)));
473 
474 /*-------------------------------------------------------------------------*/
475 
476 /*
477  * EHCI Specification 0.95 Section 3.4
478  * siTD, aka split-transaction isochronous Transfer Descriptor
479  *       ... describe full speed iso xfers through TT in hubs
480  * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
481  */
482 struct ehci_sitd {
483 	/* first part defined by EHCI spec */
484 	__hc32			hw_next;
485 /* uses bit field macros above - see EHCI 0.95 Table 3-8 */
486 	__hc32			hw_fullspeed_ep;	/* EHCI table 3-9 */
487 	__hc32			hw_uframe;		/* EHCI table 3-10 */
488 	__hc32			hw_results;		/* EHCI table 3-11 */
489 #define	SITD_IOC	(1 << 31)	/* interrupt on completion */
490 #define	SITD_PAGE	(1 << 30)	/* buffer 0/1 */
491 #define	SITD_LENGTH(x)	(0x3ff & ((x)>>16))
492 #define	SITD_STS_ACTIVE	(1 << 7)	/* HC may execute this */
493 #define	SITD_STS_ERR	(1 << 6)	/* error from TT */
494 #define	SITD_STS_DBE	(1 << 5)	/* data buffer error (in HC) */
495 #define	SITD_STS_BABBLE	(1 << 4)	/* device was babbling */
496 #define	SITD_STS_XACT	(1 << 3)	/* illegal IN response */
497 #define	SITD_STS_MMF	(1 << 2)	/* incomplete split transaction */
498 #define	SITD_STS_STS	(1 << 1)	/* split transaction state */
499 
500 #define SITD_ACTIVE(ehci)	cpu_to_hc32(ehci, SITD_STS_ACTIVE)
501 
502 	__hc32			hw_buf [2];		/* EHCI table 3-12 */
503 	__hc32			hw_backpointer;		/* EHCI table 3-13 */
504 	__hc32			hw_buf_hi [2];		/* Appendix B */
505 
506 	/* the rest is HCD-private */
507 	dma_addr_t		sitd_dma;
508 	union ehci_shadow	sitd_next;	/* ptr to periodic q entry */
509 
510 	struct urb		*urb;
511 	struct ehci_iso_stream	*stream;	/* endpoint's queue */
512 	struct list_head	sitd_list;	/* list of stream's sitds */
513 	unsigned		frame;
514 	unsigned		index;
515 } __attribute__ ((aligned (32)));
516 
517 /*-------------------------------------------------------------------------*/
518 
519 /*
520  * EHCI Specification 0.96 Section 3.7
521  * Periodic Frame Span Traversal Node (FSTN)
522  *
523  * Manages split interrupt transactions (using TT) that span frame boundaries
524  * into uframes 0/1; see 4.12.2.2.  In those uframes, a "save place" FSTN
525  * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
526  * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
527  */
528 struct ehci_fstn {
529 	__hc32			hw_next;	/* any periodic q entry */
530 	__hc32			hw_prev;	/* qh or EHCI_LIST_END */
531 
532 	/* the rest is HCD-private */
533 	dma_addr_t		fstn_dma;
534 	union ehci_shadow	fstn_next;	/* ptr to periodic q entry */
535 } __attribute__ ((aligned (32)));
536 
537 /*-------------------------------------------------------------------------*/
538 
539 #ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
540 
541 /*
542  * Some EHCI controllers have a Transaction Translator built into the
543  * root hub. This is a non-standard feature.  Each controller will need
544  * to add code to the following inline functions, and call them as
545  * needed (mostly in root hub code).
546  */
547 
548 #define	ehci_is_TDI(e)			(ehci_to_hcd(e)->has_tt)
549 
550 /* Returns the speed of a device attached to a port on the root hub. */
551 static inline unsigned int
552 ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
553 {
554 	if (ehci_is_TDI(ehci)) {
555 		switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
556 		case 0:
557 			return 0;
558 		case 1:
559 			return (1<<USB_PORT_FEAT_LOWSPEED);
560 		case 2:
561 		default:
562 			return (1<<USB_PORT_FEAT_HIGHSPEED);
563 		}
564 	}
565 	return (1<<USB_PORT_FEAT_HIGHSPEED);
566 }
567 
568 #else
569 
570 #define	ehci_is_TDI(e)			(0)
571 
572 #define	ehci_port_speed(ehci, portsc)	(1<<USB_PORT_FEAT_HIGHSPEED)
573 #endif
574 
575 /*-------------------------------------------------------------------------*/
576 
577 #ifdef CONFIG_PPC_83xx
578 /* Some Freescale processors have an erratum in which the TT
579  * port number in the queue head was 0..N-1 instead of 1..N.
580  */
581 #define	ehci_has_fsl_portno_bug(e)		((e)->has_fsl_port_bug)
582 #else
583 #define	ehci_has_fsl_portno_bug(e)		(0)
584 #endif
585 
586 /*
587  * While most USB host controllers implement their registers in
588  * little-endian format, a minority (celleb companion chip) implement
589  * them in big endian format.
590  *
591  * This attempts to support either format at compile time without a
592  * runtime penalty, or both formats with the additional overhead
593  * of checking a flag bit.
594  */
595 
596 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
597 #define ehci_big_endian_mmio(e)		((e)->big_endian_mmio)
598 #else
599 #define ehci_big_endian_mmio(e)		0
600 #endif
601 
602 /*
603  * Big-endian read/write functions are arch-specific.
604  * Other arches can be added if/when they're needed.
605  */
606 #if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX)
607 #define readl_be(addr)		__raw_readl((__force unsigned *)addr)
608 #define writel_be(val, addr)	__raw_writel(val, (__force unsigned *)addr)
609 #endif
610 
611 static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
612 		__u32 __iomem * regs)
613 {
614 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
615 	return ehci_big_endian_mmio(ehci) ?
616 		readl_be(regs) :
617 		readl(regs);
618 #else
619 	return readl(regs);
620 #endif
621 }
622 
623 static inline void ehci_writel(const struct ehci_hcd *ehci,
624 		const unsigned int val, __u32 __iomem *regs)
625 {
626 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
627 	ehci_big_endian_mmio(ehci) ?
628 		writel_be(val, regs) :
629 		writel(val, regs);
630 #else
631 	writel(val, regs);
632 #endif
633 }
634 
635 /*
636  * On certain ppc-44x SoC there is a HW issue, that could only worked around with
637  * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
638  * Other common bits are dependant on has_amcc_usb23 quirk flag.
639  */
640 #ifdef CONFIG_44x
641 static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
642 {
643 	u32 hc_control;
644 
645 	hc_control = (readl_be(ehci->ohci_hcctrl_reg) & ~OHCI_CTRL_HCFS);
646 	if (operational)
647 		hc_control |= OHCI_USB_OPER;
648 	else
649 		hc_control |= OHCI_USB_SUSPEND;
650 
651 	writel_be(hc_control, ehci->ohci_hcctrl_reg);
652 	(void) readl_be(ehci->ohci_hcctrl_reg);
653 }
654 #else
655 static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
656 { }
657 #endif
658 
659 /*-------------------------------------------------------------------------*/
660 
661 /*
662  * The AMCC 440EPx not only implements its EHCI registers in big-endian
663  * format, but also its DMA data structures (descriptors).
664  *
665  * EHCI controllers accessed through PCI work normally (little-endian
666  * everywhere), so we won't bother supporting a BE-only mode for now.
667  */
668 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
669 #define ehci_big_endian_desc(e)		((e)->big_endian_desc)
670 
671 /* cpu to ehci */
672 static inline __hc32 cpu_to_hc32 (const struct ehci_hcd *ehci, const u32 x)
673 {
674 	return ehci_big_endian_desc(ehci)
675 		? (__force __hc32)cpu_to_be32(x)
676 		: (__force __hc32)cpu_to_le32(x);
677 }
678 
679 /* ehci to cpu */
680 static inline u32 hc32_to_cpu (const struct ehci_hcd *ehci, const __hc32 x)
681 {
682 	return ehci_big_endian_desc(ehci)
683 		? be32_to_cpu((__force __be32)x)
684 		: le32_to_cpu((__force __le32)x);
685 }
686 
687 static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
688 {
689 	return ehci_big_endian_desc(ehci)
690 		? be32_to_cpup((__force __be32 *)x)
691 		: le32_to_cpup((__force __le32 *)x);
692 }
693 
694 #else
695 
696 /* cpu to ehci */
697 static inline __hc32 cpu_to_hc32 (const struct ehci_hcd *ehci, const u32 x)
698 {
699 	return cpu_to_le32(x);
700 }
701 
702 /* ehci to cpu */
703 static inline u32 hc32_to_cpu (const struct ehci_hcd *ehci, const __hc32 x)
704 {
705 	return le32_to_cpu(x);
706 }
707 
708 static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
709 {
710 	return le32_to_cpup(x);
711 }
712 
713 #endif
714 
715 /*-------------------------------------------------------------------------*/
716 
717 #ifndef DEBUG
718 #define STUB_DEBUG_FILES
719 #endif	/* DEBUG */
720 
721 /*-------------------------------------------------------------------------*/
722 
723 #endif /* __LINUX_EHCI_HCD_H */
724