1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * EHCI HCD (Host Controller Driver) PCI Bus Glue. 4 * 5 * Copyright (c) 2000-2004 by David Brownell 6 */ 7 8 #include <linux/kernel.h> 9 #include <linux/module.h> 10 #include <linux/pci.h> 11 #include <linux/usb.h> 12 #include <linux/usb/hcd.h> 13 14 #include "ehci.h" 15 #include "pci-quirks.h" 16 17 #define DRIVER_DESC "EHCI PCI platform driver" 18 19 static const char hcd_name[] = "ehci-pci"; 20 21 /* defined here to avoid adding to pci_ids.h for single instance use */ 22 #define PCI_DEVICE_ID_INTEL_CE4100_USB 0x2e70 23 24 /*-------------------------------------------------------------------------*/ 25 #define PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC 0x0939 26 static inline bool is_intel_quark_x1000(struct pci_dev *pdev) 27 { 28 return pdev->vendor == PCI_VENDOR_ID_INTEL && 29 pdev->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC; 30 } 31 32 /* 33 * This is the list of PCI IDs for the devices that have EHCI USB class and 34 * specific drivers for that. One of the example is a ChipIdea device installed 35 * on some Intel MID platforms. 36 */ 37 static const struct pci_device_id bypass_pci_id_table[] = { 38 /* ChipIdea on Intel MID platform */ 39 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811), }, 40 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829), }, 41 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006), }, 42 {} 43 }; 44 45 static inline bool is_bypassed_id(struct pci_dev *pdev) 46 { 47 return !!pci_match_id(bypass_pci_id_table, pdev); 48 } 49 50 /* 51 * 0x84 is the offset of in/out threshold register, 52 * and it is the same offset as the register of 'hostpc'. 53 */ 54 #define intel_quark_x1000_insnreg01 hostpc 55 56 /* Maximum usable threshold value is 0x7f dwords for both IN and OUT */ 57 #define INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD 0x007f007f 58 59 /* called after powerup, by probe or system-pm "wakeup" */ 60 static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev) 61 { 62 int retval; 63 64 /* we expect static quirk code to handle the "extended capabilities" 65 * (currently just BIOS handoff) allowed starting with EHCI 0.96 66 */ 67 68 /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ 69 retval = pci_set_mwi(pdev); 70 if (!retval) 71 ehci_dbg(ehci, "MWI active\n"); 72 73 /* Reset the threshold limit */ 74 if (is_intel_quark_x1000(pdev)) { 75 /* 76 * For the Intel QUARK X1000, raise the I/O threshold to the 77 * maximum usable value in order to improve performance. 78 */ 79 ehci_writel(ehci, INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD, 80 ehci->regs->intel_quark_x1000_insnreg01); 81 } 82 83 return 0; 84 } 85 86 /* called during probe() after chip reset completes */ 87 static int ehci_pci_setup(struct usb_hcd *hcd) 88 { 89 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 90 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 91 u32 temp; 92 int retval; 93 94 ehci->caps = hcd->regs; 95 96 /* 97 * ehci_init() causes memory for DMA transfers to be 98 * allocated. Thus, any vendor-specific workarounds based on 99 * limiting the type of memory used for DMA transfers must 100 * happen before ehci_setup() is called. 101 * 102 * Most other workarounds can be done either before or after 103 * init and reset; they are located here too. 104 */ 105 switch (pdev->vendor) { 106 case PCI_VENDOR_ID_TOSHIBA_2: 107 /* celleb's companion chip */ 108 if (pdev->device == 0x01b5) { 109 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO 110 ehci->big_endian_mmio = 1; 111 #else 112 ehci_warn(ehci, 113 "unsupported big endian Toshiba quirk\n"); 114 #endif 115 } 116 break; 117 case PCI_VENDOR_ID_NVIDIA: 118 /* NVidia reports that certain chips don't handle 119 * QH, ITD, or SITD addresses above 2GB. (But TD, 120 * data buffer, and periodic schedule are normal.) 121 */ 122 switch (pdev->device) { 123 case 0x003c: /* MCP04 */ 124 case 0x005b: /* CK804 */ 125 case 0x00d8: /* CK8 */ 126 case 0x00e8: /* CK8S */ 127 if (pci_set_consistent_dma_mask(pdev, 128 DMA_BIT_MASK(31)) < 0) 129 ehci_warn(ehci, "can't enable NVidia " 130 "workaround for >2GB RAM\n"); 131 break; 132 133 /* Some NForce2 chips have problems with selective suspend; 134 * fixed in newer silicon. 135 */ 136 case 0x0068: 137 if (pdev->revision < 0xa4) 138 ehci->no_selective_suspend = 1; 139 break; 140 } 141 break; 142 case PCI_VENDOR_ID_INTEL: 143 if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB) 144 hcd->has_tt = 1; 145 break; 146 case PCI_VENDOR_ID_TDI: 147 if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) 148 hcd->has_tt = 1; 149 break; 150 case PCI_VENDOR_ID_AMD: 151 /* AMD PLL quirk */ 152 if (usb_amd_quirk_pll_check()) 153 ehci->amd_pll_fix = 1; 154 /* AMD8111 EHCI doesn't work, according to AMD errata */ 155 if (pdev->device == 0x7463) { 156 ehci_info(ehci, "ignoring AMD8111 (errata)\n"); 157 retval = -EIO; 158 goto done; 159 } 160 161 /* 162 * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may 163 * read/write memory space which does not belong to it when 164 * there is NULL pointer with T-bit set to 1 in the frame list 165 * table. To avoid the issue, the frame list link pointer 166 * should always contain a valid pointer to a inactive qh. 167 */ 168 if (pdev->device == 0x7808) { 169 ehci->use_dummy_qh = 1; 170 ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n"); 171 } 172 break; 173 case PCI_VENDOR_ID_VIA: 174 if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x60) { 175 u8 tmp; 176 177 /* The VT6212 defaults to a 1 usec EHCI sleep time which 178 * hogs the PCI bus *badly*. Setting bit 5 of 0x4B makes 179 * that sleep time use the conventional 10 usec. 180 */ 181 pci_read_config_byte(pdev, 0x4b, &tmp); 182 if (tmp & 0x20) 183 break; 184 pci_write_config_byte(pdev, 0x4b, tmp | 0x20); 185 } 186 break; 187 case PCI_VENDOR_ID_ATI: 188 /* AMD PLL quirk */ 189 if (usb_amd_quirk_pll_check()) 190 ehci->amd_pll_fix = 1; 191 192 /* 193 * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may 194 * read/write memory space which does not belong to it when 195 * there is NULL pointer with T-bit set to 1 in the frame list 196 * table. To avoid the issue, the frame list link pointer 197 * should always contain a valid pointer to a inactive qh. 198 */ 199 if (pdev->device == 0x4396) { 200 ehci->use_dummy_qh = 1; 201 ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n"); 202 } 203 /* SB600 and old version of SB700 have a bug in EHCI controller, 204 * which causes usb devices lose response in some cases. 205 */ 206 if ((pdev->device == 0x4386 || pdev->device == 0x4396) && 207 usb_amd_hang_symptom_quirk()) { 208 u8 tmp; 209 ehci_info(ehci, "applying AMD SB600/SB700 USB freeze workaround\n"); 210 pci_read_config_byte(pdev, 0x53, &tmp); 211 pci_write_config_byte(pdev, 0x53, tmp | (1<<3)); 212 } 213 break; 214 case PCI_VENDOR_ID_NETMOS: 215 /* MosChip frame-index-register bug */ 216 ehci_info(ehci, "applying MosChip frame-index workaround\n"); 217 ehci->frame_index_bug = 1; 218 break; 219 } 220 221 /* optional debug port, normally in the first BAR */ 222 temp = pci_find_capability(pdev, PCI_CAP_ID_DBG); 223 if (temp) { 224 pci_read_config_dword(pdev, temp, &temp); 225 temp >>= 16; 226 if (((temp >> 13) & 7) == 1) { 227 u32 hcs_params = ehci_readl(ehci, 228 &ehci->caps->hcs_params); 229 230 temp &= 0x1fff; 231 ehci->debug = hcd->regs + temp; 232 temp = ehci_readl(ehci, &ehci->debug->control); 233 ehci_info(ehci, "debug port %d%s\n", 234 HCS_DEBUG_PORT(hcs_params), 235 (temp & DBGP_ENABLED) ? " IN USE" : ""); 236 if (!(temp & DBGP_ENABLED)) 237 ehci->debug = NULL; 238 } 239 } 240 241 retval = ehci_setup(hcd); 242 if (retval) 243 return retval; 244 245 /* These workarounds need to be applied after ehci_setup() */ 246 switch (pdev->vendor) { 247 case PCI_VENDOR_ID_NEC: 248 case PCI_VENDOR_ID_INTEL: 249 case PCI_VENDOR_ID_AMD: 250 ehci->need_io_watchdog = 0; 251 break; 252 case PCI_VENDOR_ID_NVIDIA: 253 switch (pdev->device) { 254 /* MCP89 chips on the MacBookAir3,1 give EPROTO when 255 * fetching device descriptors unless LPM is disabled. 256 * There are also intermittent problems enumerating 257 * devices with PPCD enabled. 258 */ 259 case 0x0d9d: 260 ehci_info(ehci, "disable ppcd for nvidia mcp89\n"); 261 ehci->has_ppcd = 0; 262 ehci->command &= ~CMD_PPCEE; 263 break; 264 } 265 break; 266 } 267 268 /* at least the Genesys GL880S needs fixup here */ 269 temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); 270 temp &= 0x0f; 271 if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) { 272 ehci_dbg(ehci, "bogus port configuration: " 273 "cc=%d x pcc=%d < ports=%d\n", 274 HCS_N_CC(ehci->hcs_params), 275 HCS_N_PCC(ehci->hcs_params), 276 HCS_N_PORTS(ehci->hcs_params)); 277 278 switch (pdev->vendor) { 279 case 0x17a0: /* GENESYS */ 280 /* GL880S: should be PORTS=2 */ 281 temp |= (ehci->hcs_params & ~0xf); 282 ehci->hcs_params = temp; 283 break; 284 case PCI_VENDOR_ID_NVIDIA: 285 /* NF4: should be PCC=10 */ 286 break; 287 } 288 } 289 290 /* Serial Bus Release Number is at PCI 0x60 offset */ 291 if (pdev->vendor == PCI_VENDOR_ID_STMICRO 292 && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST) 293 ; /* ConneXT has no sbrn register */ 294 else 295 pci_read_config_byte(pdev, 0x60, &ehci->sbrn); 296 297 /* Keep this around for a while just in case some EHCI 298 * implementation uses legacy PCI PM support. This test 299 * can be removed on 17 Dec 2009 if the dev_warn() hasn't 300 * been triggered by then. 301 */ 302 if (!device_can_wakeup(&pdev->dev)) { 303 u16 port_wake; 304 305 pci_read_config_word(pdev, 0x62, &port_wake); 306 if (port_wake & 0x0001) { 307 dev_warn(&pdev->dev, "Enabling legacy PCI PM\n"); 308 device_set_wakeup_capable(&pdev->dev, 1); 309 } 310 } 311 312 #ifdef CONFIG_PM 313 if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev)) 314 ehci_warn(ehci, "selective suspend/wakeup unavailable\n"); 315 #endif 316 317 retval = ehci_pci_reinit(ehci, pdev); 318 done: 319 return retval; 320 } 321 322 /*-------------------------------------------------------------------------*/ 323 324 #ifdef CONFIG_PM 325 326 /* suspend/resume, section 4.3 */ 327 328 /* These routines rely on the PCI bus glue 329 * to handle powerdown and wakeup, and currently also on 330 * transceivers that don't need any software attention to set up 331 * the right sort of wakeup. 332 * Also they depend on separate root hub suspend/resume. 333 */ 334 335 static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) 336 { 337 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 338 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 339 340 if (ehci_resume(hcd, hibernated) != 0) 341 (void) ehci_pci_reinit(ehci, pdev); 342 return 0; 343 } 344 345 #else 346 347 #define ehci_suspend NULL 348 #define ehci_pci_resume NULL 349 #endif /* CONFIG_PM */ 350 351 static struct hc_driver __read_mostly ehci_pci_hc_driver; 352 353 static const struct ehci_driver_overrides pci_overrides __initconst = { 354 .reset = ehci_pci_setup, 355 }; 356 357 /*-------------------------------------------------------------------------*/ 358 359 static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) 360 { 361 if (is_bypassed_id(pdev)) 362 return -ENODEV; 363 return usb_hcd_pci_probe(pdev, id, &ehci_pci_hc_driver); 364 } 365 366 static void ehci_pci_remove(struct pci_dev *pdev) 367 { 368 pci_clear_mwi(pdev); 369 usb_hcd_pci_remove(pdev); 370 } 371 372 /* PCI driver selection metadata; PCI hotplugging uses this */ 373 static const struct pci_device_id pci_ids [] = { { 374 /* handle any USB 2.0 EHCI controller */ 375 PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0), 376 }, { 377 PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST), 378 }, 379 { /* end: all zeroes */ } 380 }; 381 MODULE_DEVICE_TABLE(pci, pci_ids); 382 383 /* pci driver glue; this is a "new style" PCI driver module */ 384 static struct pci_driver ehci_pci_driver = { 385 .name = hcd_name, 386 .id_table = pci_ids, 387 388 .probe = ehci_pci_probe, 389 .remove = ehci_pci_remove, 390 .shutdown = usb_hcd_pci_shutdown, 391 392 #ifdef CONFIG_PM 393 .driver = { 394 .pm = &usb_hcd_pci_pm_ops 395 }, 396 #endif 397 }; 398 399 static int __init ehci_pci_init(void) 400 { 401 if (usb_disabled()) 402 return -ENODEV; 403 404 pr_info("%s: " DRIVER_DESC "\n", hcd_name); 405 406 ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides); 407 408 /* Entries for the PCI suspend/resume callbacks are special */ 409 ehci_pci_hc_driver.pci_suspend = ehci_suspend; 410 ehci_pci_hc_driver.pci_resume = ehci_pci_resume; 411 412 return pci_register_driver(&ehci_pci_driver); 413 } 414 module_init(ehci_pci_init); 415 416 static void __exit ehci_pci_cleanup(void) 417 { 418 pci_unregister_driver(&ehci_pci_driver); 419 } 420 module_exit(ehci_pci_cleanup); 421 422 MODULE_DESCRIPTION(DRIVER_DESC); 423 MODULE_AUTHOR("David Brownell"); 424 MODULE_AUTHOR("Alan Stern"); 425 MODULE_LICENSE("GPL"); 426