xref: /openbmc/linux/drivers/usb/host/ehci-orion.c (revision ae0be8de)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * drivers/usb/host/ehci-orion.c
4  *
5  * Tzachi Perelstein <tzachi@marvell.com>
6  */
7 
8 #include <linux/kernel.h>
9 #include <linux/module.h>
10 #include <linux/platform_device.h>
11 #include <linux/mbus.h>
12 #include <linux/clk.h>
13 #include <linux/platform_data/usb-ehci-orion.h>
14 #include <linux/of.h>
15 #include <linux/phy/phy.h>
16 #include <linux/of_device.h>
17 #include <linux/of_irq.h>
18 #include <linux/usb.h>
19 #include <linux/usb/hcd.h>
20 #include <linux/io.h>
21 #include <linux/dma-mapping.h>
22 
23 #include "ehci.h"
24 
25 #define rdl(off)	readl_relaxed(hcd->regs + (off))
26 #define wrl(off, val)	writel_relaxed((val), hcd->regs + (off))
27 
28 #define USB_CMD			0x140
29 #define   USB_CMD_RUN		BIT(0)
30 #define   USB_CMD_RESET		BIT(1)
31 #define USB_MODE		0x1a8
32 #define   USB_MODE_MASK		GENMASK(1, 0)
33 #define   USB_MODE_DEVICE	0x2
34 #define   USB_MODE_HOST		0x3
35 #define   USB_MODE_SDIS		BIT(4)
36 #define USB_CAUSE		0x310
37 #define USB_MASK		0x314
38 #define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
39 #define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
40 #define USB_IPG			0x360
41 #define USB_PHY_PWR_CTRL	0x400
42 #define USB_PHY_TX_CTRL		0x420
43 #define USB_PHY_RX_CTRL		0x430
44 #define USB_PHY_IVREF_CTRL	0x440
45 #define USB_PHY_TST_GRP_CTRL	0x450
46 
47 #define USB_SBUSCFG		0x90
48 
49 /* BAWR = BARD = 3 : Align read/write bursts packets larger than 128 bytes */
50 #define USB_SBUSCFG_BAWR_ALIGN_128B	(0x3 << 6)
51 #define USB_SBUSCFG_BARD_ALIGN_128B	(0x3 << 3)
52 /* AHBBRST = 3	   : Align AHB Burst to INCR16 (64 bytes) */
53 #define USB_SBUSCFG_AHBBRST_INCR16	(0x3 << 0)
54 
55 #define USB_SBUSCFG_DEF_VAL (USB_SBUSCFG_BAWR_ALIGN_128B	\
56 			     | USB_SBUSCFG_BARD_ALIGN_128B	\
57 			     | USB_SBUSCFG_AHBBRST_INCR16)
58 
59 #define DRIVER_DESC "EHCI orion driver"
60 
61 #define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv)
62 
63 struct orion_ehci_hcd {
64 	struct clk *clk;
65 	struct phy *phy;
66 };
67 
68 static const char hcd_name[] = "ehci-orion";
69 
70 static struct hc_driver __read_mostly ehci_orion_hc_driver;
71 
72 /*
73  * Implement Orion USB controller specification guidelines
74  */
75 static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
76 {
77 	/* The below GLs are according to the Orion Errata document */
78 	/*
79 	 * Clear interrupt cause and mask
80 	 */
81 	wrl(USB_CAUSE, 0);
82 	wrl(USB_MASK, 0);
83 
84 	/*
85 	 * Reset controller
86 	 */
87 	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
88 	while (rdl(USB_CMD) & USB_CMD_RESET);
89 
90 	/*
91 	 * GL# USB-10: Set IPG for non start of frame packets
92 	 * Bits[14:8]=0xc
93 	 */
94 	wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
95 
96 	/*
97 	 * GL# USB-9: USB 2.0 Power Control
98 	 * BG_VSEL[7:6]=0x1
99 	 */
100 	wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
101 
102 	/*
103 	 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
104 	 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
105 	 */
106 	wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
107 
108 	/*
109 	 * GL# USB-3 GL# USB-9: USB PHY Rx Control
110 	 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
111 	 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
112 	 */
113 	wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
114 
115 	/*
116 	 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
117 	 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
118 	 */
119 	wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
120 
121 	/*
122 	 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
123 	 * REG_FIFO_SQ_RST[15]=0
124 	 */
125 	wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
126 
127 	/*
128 	 * Stop and reset controller
129 	 */
130 	wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN);
131 	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
132 	while (rdl(USB_CMD) & USB_CMD_RESET);
133 
134 	/*
135 	 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
136 	 * TBD: This need to be done after each reset!
137 	 * GL# USB-4 Setup USB Host mode
138 	 */
139 	wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST);
140 }
141 
142 static void
143 ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
144 			     const struct mbus_dram_target_info *dram)
145 {
146 	int i;
147 
148 	for (i = 0; i < 4; i++) {
149 		wrl(USB_WINDOW_CTRL(i), 0);
150 		wrl(USB_WINDOW_BASE(i), 0);
151 	}
152 
153 	for (i = 0; i < dram->num_cs; i++) {
154 		const struct mbus_dram_window *cs = dram->cs + i;
155 
156 		wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
157 					(cs->mbus_attr << 8) |
158 					(dram->mbus_dram_target_id << 4) | 1);
159 		wrl(USB_WINDOW_BASE(i), cs->base);
160 	}
161 }
162 
163 static int ehci_orion_drv_reset(struct usb_hcd *hcd)
164 {
165 	struct device *dev = hcd->self.controller;
166 	int ret;
167 
168 	ret = ehci_setup(hcd);
169 	if (ret)
170 		return ret;
171 
172 	/*
173 	 * For SoC without hlock, need to program sbuscfg value to guarantee
174 	 * AHB master's burst would not overrun or underrun FIFO.
175 	 *
176 	 * sbuscfg reg has to be set after usb controller reset, otherwise
177 	 * the value would be override to 0.
178 	 */
179 	if (of_device_is_compatible(dev->of_node, "marvell,armada-3700-ehci"))
180 		wrl(USB_SBUSCFG, USB_SBUSCFG_DEF_VAL);
181 
182 	return ret;
183 }
184 
185 static int __maybe_unused ehci_orion_drv_suspend(struct device *dev)
186 {
187 	struct usb_hcd *hcd = dev_get_drvdata(dev);
188 
189 	return ehci_suspend(hcd, device_may_wakeup(dev));
190 }
191 
192 static int __maybe_unused ehci_orion_drv_resume(struct device *dev)
193 {
194 	struct usb_hcd *hcd = dev_get_drvdata(dev);
195 
196 	return ehci_resume(hcd, false);
197 }
198 
199 static SIMPLE_DEV_PM_OPS(ehci_orion_pm_ops, ehci_orion_drv_suspend,
200 			 ehci_orion_drv_resume);
201 
202 static const struct ehci_driver_overrides orion_overrides __initconst = {
203 	.extra_priv_size =	sizeof(struct orion_ehci_hcd),
204 	.reset = ehci_orion_drv_reset,
205 };
206 
207 static int ehci_orion_drv_probe(struct platform_device *pdev)
208 {
209 	struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev);
210 	const struct mbus_dram_target_info *dram;
211 	struct resource *res;
212 	struct usb_hcd *hcd;
213 	struct ehci_hcd *ehci;
214 	void __iomem *regs;
215 	int irq, err;
216 	enum orion_ehci_phy_ver phy_version;
217 	struct orion_ehci_hcd *priv;
218 
219 	if (usb_disabled())
220 		return -ENODEV;
221 
222 	pr_debug("Initializing Orion-SoC USB Host Controller\n");
223 
224 	irq = platform_get_irq(pdev, 0);
225 	if (irq <= 0) {
226 		dev_err(&pdev->dev,
227 			"Found HC with no IRQ. Check %s setup!\n",
228 			dev_name(&pdev->dev));
229 		err = -ENODEV;
230 		goto err;
231 	}
232 
233 	/*
234 	 * Right now device-tree probed devices don't get dma_mask
235 	 * set. Since shared usb code relies on it, set it here for
236 	 * now. Once we have dma capability bindings this can go away.
237 	 */
238 	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
239 	if (err)
240 		goto err;
241 
242 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
243 	regs = devm_ioremap_resource(&pdev->dev, res);
244 	if (IS_ERR(regs)) {
245 		err = PTR_ERR(regs);
246 		goto err;
247 	}
248 
249 	hcd = usb_create_hcd(&ehci_orion_hc_driver,
250 			&pdev->dev, dev_name(&pdev->dev));
251 	if (!hcd) {
252 		err = -ENOMEM;
253 		goto err;
254 	}
255 
256 	hcd->rsrc_start = res->start;
257 	hcd->rsrc_len = resource_size(res);
258 	hcd->regs = regs;
259 
260 	ehci = hcd_to_ehci(hcd);
261 	ehci->caps = hcd->regs + 0x100;
262 	hcd->has_tt = 1;
263 
264 	priv = hcd_to_orion_priv(hcd);
265 	/*
266 	 * Not all platforms can gate the clock, so it is not an error if
267 	 * the clock does not exists.
268 	 */
269 	priv->clk = devm_clk_get(&pdev->dev, NULL);
270 	if (!IS_ERR(priv->clk))
271 		clk_prepare_enable(priv->clk);
272 
273 	priv->phy = devm_phy_optional_get(&pdev->dev, "usb");
274 	if (IS_ERR(priv->phy)) {
275 		err = PTR_ERR(priv->phy);
276 		if (err != -ENOSYS)
277 			goto err_dis_clk;
278 	}
279 
280 	/*
281 	 * (Re-)program MBUS remapping windows if we are asked to.
282 	 */
283 	dram = mv_mbus_dram_info();
284 	if (dram)
285 		ehci_orion_conf_mbus_windows(hcd, dram);
286 
287 	/*
288 	 * setup Orion USB controller.
289 	 */
290 	if (pdev->dev.of_node)
291 		phy_version = EHCI_PHY_NA;
292 	else
293 		phy_version = pd->phy_version;
294 
295 	switch (phy_version) {
296 	case EHCI_PHY_NA:	/* dont change USB phy settings */
297 		break;
298 	case EHCI_PHY_ORION:
299 		orion_usb_phy_v1_setup(hcd);
300 		break;
301 	case EHCI_PHY_DD:
302 	case EHCI_PHY_KW:
303 	default:
304 		dev_warn(&pdev->dev, "USB phy version isn't supported.\n");
305 	}
306 
307 	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
308 	if (err)
309 		goto err_dis_clk;
310 
311 	device_wakeup_enable(hcd->self.controller);
312 	return 0;
313 
314 err_dis_clk:
315 	if (!IS_ERR(priv->clk))
316 		clk_disable_unprepare(priv->clk);
317 	usb_put_hcd(hcd);
318 err:
319 	dev_err(&pdev->dev, "init %s fail, %d\n",
320 		dev_name(&pdev->dev), err);
321 
322 	return err;
323 }
324 
325 static int ehci_orion_drv_remove(struct platform_device *pdev)
326 {
327 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
328 	struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd);
329 
330 	usb_remove_hcd(hcd);
331 
332 	if (!IS_ERR(priv->clk))
333 		clk_disable_unprepare(priv->clk);
334 
335 	usb_put_hcd(hcd);
336 
337 	return 0;
338 }
339 
340 static const struct of_device_id ehci_orion_dt_ids[] = {
341 	{ .compatible = "marvell,orion-ehci", },
342 	{ .compatible = "marvell,armada-3700-ehci", },
343 	{},
344 };
345 MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
346 
347 static struct platform_driver ehci_orion_driver = {
348 	.probe		= ehci_orion_drv_probe,
349 	.remove		= ehci_orion_drv_remove,
350 	.shutdown	= usb_hcd_platform_shutdown,
351 	.driver = {
352 		.name	= "orion-ehci",
353 		.of_match_table = ehci_orion_dt_ids,
354 		.pm = &ehci_orion_pm_ops,
355 	},
356 };
357 
358 static int __init ehci_orion_init(void)
359 {
360 	if (usb_disabled())
361 		return -ENODEV;
362 
363 	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
364 
365 	ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
366 	return platform_driver_register(&ehci_orion_driver);
367 }
368 module_init(ehci_orion_init);
369 
370 static void __exit ehci_orion_cleanup(void)
371 {
372 	platform_driver_unregister(&ehci_orion_driver);
373 }
374 module_exit(ehci_orion_cleanup);
375 
376 MODULE_DESCRIPTION(DRIVER_DESC);
377 MODULE_ALIAS("platform:orion-ehci");
378 MODULE_AUTHOR("Tzachi Perelstein");
379 MODULE_LICENSE("GPL v2");
380