xref: /openbmc/linux/drivers/usb/host/ehci-orion.c (revision 711aab1d)
1 /*
2  * drivers/usb/host/ehci-orion.c
3  *
4  * Tzachi Perelstein <tzachi@marvell.com>
5  *
6  * This file is licensed under  the terms of the GNU General Public
7  * License version 2. This program is licensed "as is" without any
8  * warranty of any kind, whether express or implied.
9  */
10 
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/platform_device.h>
14 #include <linux/mbus.h>
15 #include <linux/clk.h>
16 #include <linux/platform_data/usb-ehci-orion.h>
17 #include <linux/of.h>
18 #include <linux/phy/phy.h>
19 #include <linux/of_device.h>
20 #include <linux/of_irq.h>
21 #include <linux/usb.h>
22 #include <linux/usb/hcd.h>
23 #include <linux/io.h>
24 #include <linux/dma-mapping.h>
25 
26 #include "ehci.h"
27 
28 #define rdl(off)	readl_relaxed(hcd->regs + (off))
29 #define wrl(off, val)	writel_relaxed((val), hcd->regs + (off))
30 
31 #define USB_CMD			0x140
32 #define   USB_CMD_RUN		BIT(0)
33 #define   USB_CMD_RESET		BIT(1)
34 #define USB_MODE		0x1a8
35 #define   USB_MODE_MASK		GENMASK(1, 0)
36 #define   USB_MODE_DEVICE	0x2
37 #define   USB_MODE_HOST		0x3
38 #define   USB_MODE_SDIS		BIT(4)
39 #define USB_CAUSE		0x310
40 #define USB_MASK		0x314
41 #define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
42 #define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
43 #define USB_IPG			0x360
44 #define USB_PHY_PWR_CTRL	0x400
45 #define USB_PHY_TX_CTRL		0x420
46 #define USB_PHY_RX_CTRL		0x430
47 #define USB_PHY_IVREF_CTRL	0x440
48 #define USB_PHY_TST_GRP_CTRL	0x450
49 
50 #define USB_SBUSCFG		0x90
51 
52 /* BAWR = BARD = 3 : Align read/write bursts packets larger than 128 bytes */
53 #define USB_SBUSCFG_BAWR_ALIGN_128B	(0x3 << 6)
54 #define USB_SBUSCFG_BARD_ALIGN_128B	(0x3 << 3)
55 /* AHBBRST = 3	   : Align AHB Burst to INCR16 (64 bytes) */
56 #define USB_SBUSCFG_AHBBRST_INCR16	(0x3 << 0)
57 
58 #define USB_SBUSCFG_DEF_VAL (USB_SBUSCFG_BAWR_ALIGN_128B	\
59 			     | USB_SBUSCFG_BARD_ALIGN_128B	\
60 			     | USB_SBUSCFG_AHBBRST_INCR16)
61 
62 #define DRIVER_DESC "EHCI orion driver"
63 
64 #define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv)
65 
66 struct orion_ehci_hcd {
67 	struct clk *clk;
68 	struct phy *phy;
69 };
70 
71 static const char hcd_name[] = "ehci-orion";
72 
73 static struct hc_driver __read_mostly ehci_orion_hc_driver;
74 
75 /*
76  * Implement Orion USB controller specification guidelines
77  */
78 static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
79 {
80 	/* The below GLs are according to the Orion Errata document */
81 	/*
82 	 * Clear interrupt cause and mask
83 	 */
84 	wrl(USB_CAUSE, 0);
85 	wrl(USB_MASK, 0);
86 
87 	/*
88 	 * Reset controller
89 	 */
90 	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
91 	while (rdl(USB_CMD) & USB_CMD_RESET);
92 
93 	/*
94 	 * GL# USB-10: Set IPG for non start of frame packets
95 	 * Bits[14:8]=0xc
96 	 */
97 	wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
98 
99 	/*
100 	 * GL# USB-9: USB 2.0 Power Control
101 	 * BG_VSEL[7:6]=0x1
102 	 */
103 	wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
104 
105 	/*
106 	 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
107 	 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
108 	 */
109 	wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
110 
111 	/*
112 	 * GL# USB-3 GL# USB-9: USB PHY Rx Control
113 	 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
114 	 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
115 	 */
116 	wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
117 
118 	/*
119 	 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
120 	 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
121 	 */
122 	wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
123 
124 	/*
125 	 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
126 	 * REG_FIFO_SQ_RST[15]=0
127 	 */
128 	wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
129 
130 	/*
131 	 * Stop and reset controller
132 	 */
133 	wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN);
134 	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
135 	while (rdl(USB_CMD) & USB_CMD_RESET);
136 
137 	/*
138 	 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
139 	 * TBD: This need to be done after each reset!
140 	 * GL# USB-4 Setup USB Host mode
141 	 */
142 	wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST);
143 }
144 
145 static void
146 ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
147 			     const struct mbus_dram_target_info *dram)
148 {
149 	int i;
150 
151 	for (i = 0; i < 4; i++) {
152 		wrl(USB_WINDOW_CTRL(i), 0);
153 		wrl(USB_WINDOW_BASE(i), 0);
154 	}
155 
156 	for (i = 0; i < dram->num_cs; i++) {
157 		const struct mbus_dram_window *cs = dram->cs + i;
158 
159 		wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
160 					(cs->mbus_attr << 8) |
161 					(dram->mbus_dram_target_id << 4) | 1);
162 		wrl(USB_WINDOW_BASE(i), cs->base);
163 	}
164 }
165 
166 static int ehci_orion_drv_reset(struct usb_hcd *hcd)
167 {
168 	struct device *dev = hcd->self.controller;
169 	int ret;
170 
171 	ret = ehci_setup(hcd);
172 	if (ret)
173 		return ret;
174 
175 	/*
176 	 * For SoC without hlock, need to program sbuscfg value to guarantee
177 	 * AHB master's burst would not overrun or underrun FIFO.
178 	 *
179 	 * sbuscfg reg has to be set after usb controller reset, otherwise
180 	 * the value would be override to 0.
181 	 */
182 	if (of_device_is_compatible(dev->of_node, "marvell,armada-3700-ehci"))
183 		wrl(USB_SBUSCFG, USB_SBUSCFG_DEF_VAL);
184 
185 	return ret;
186 }
187 
188 static const struct ehci_driver_overrides orion_overrides __initconst = {
189 	.extra_priv_size =	sizeof(struct orion_ehci_hcd),
190 	.reset = ehci_orion_drv_reset,
191 };
192 
193 static int ehci_orion_drv_probe(struct platform_device *pdev)
194 {
195 	struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev);
196 	const struct mbus_dram_target_info *dram;
197 	struct resource *res;
198 	struct usb_hcd *hcd;
199 	struct ehci_hcd *ehci;
200 	void __iomem *regs;
201 	int irq, err;
202 	enum orion_ehci_phy_ver phy_version;
203 	struct orion_ehci_hcd *priv;
204 
205 	if (usb_disabled())
206 		return -ENODEV;
207 
208 	pr_debug("Initializing Orion-SoC USB Host Controller\n");
209 
210 	irq = platform_get_irq(pdev, 0);
211 	if (irq <= 0) {
212 		dev_err(&pdev->dev,
213 			"Found HC with no IRQ. Check %s setup!\n",
214 			dev_name(&pdev->dev));
215 		err = -ENODEV;
216 		goto err;
217 	}
218 
219 	/*
220 	 * Right now device-tree probed devices don't get dma_mask
221 	 * set. Since shared usb code relies on it, set it here for
222 	 * now. Once we have dma capability bindings this can go away.
223 	 */
224 	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
225 	if (err)
226 		goto err;
227 
228 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
229 	regs = devm_ioremap_resource(&pdev->dev, res);
230 	if (IS_ERR(regs)) {
231 		err = PTR_ERR(regs);
232 		goto err;
233 	}
234 
235 	hcd = usb_create_hcd(&ehci_orion_hc_driver,
236 			&pdev->dev, dev_name(&pdev->dev));
237 	if (!hcd) {
238 		err = -ENOMEM;
239 		goto err;
240 	}
241 
242 	hcd->rsrc_start = res->start;
243 	hcd->rsrc_len = resource_size(res);
244 	hcd->regs = regs;
245 
246 	ehci = hcd_to_ehci(hcd);
247 	ehci->caps = hcd->regs + 0x100;
248 	hcd->has_tt = 1;
249 
250 	priv = hcd_to_orion_priv(hcd);
251 	/*
252 	 * Not all platforms can gate the clock, so it is not an error if
253 	 * the clock does not exists.
254 	 */
255 	priv->clk = devm_clk_get(&pdev->dev, NULL);
256 	if (!IS_ERR(priv->clk))
257 		clk_prepare_enable(priv->clk);
258 
259 	priv->phy = devm_phy_optional_get(&pdev->dev, "usb");
260 	if (IS_ERR(priv->phy)) {
261 		err = PTR_ERR(priv->phy);
262 		if (err != -ENOSYS)
263 			goto err_phy_get;
264 	} else {
265 		err = phy_init(priv->phy);
266 		if (err)
267 			goto err_phy_init;
268 
269 		err = phy_power_on(priv->phy);
270 		if (err)
271 			goto err_phy_power_on;
272 	}
273 
274 	/*
275 	 * (Re-)program MBUS remapping windows if we are asked to.
276 	 */
277 	dram = mv_mbus_dram_info();
278 	if (dram)
279 		ehci_orion_conf_mbus_windows(hcd, dram);
280 
281 	/*
282 	 * setup Orion USB controller.
283 	 */
284 	if (pdev->dev.of_node)
285 		phy_version = EHCI_PHY_NA;
286 	else
287 		phy_version = pd->phy_version;
288 
289 	switch (phy_version) {
290 	case EHCI_PHY_NA:	/* dont change USB phy settings */
291 		break;
292 	case EHCI_PHY_ORION:
293 		orion_usb_phy_v1_setup(hcd);
294 		break;
295 	case EHCI_PHY_DD:
296 	case EHCI_PHY_KW:
297 	default:
298 		dev_warn(&pdev->dev, "USB phy version isn't supported.\n");
299 	}
300 
301 	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
302 	if (err)
303 		goto err_add_hcd;
304 
305 	device_wakeup_enable(hcd->self.controller);
306 	return 0;
307 
308 err_add_hcd:
309 	if (!IS_ERR(priv->phy))
310 		phy_power_off(priv->phy);
311 err_phy_power_on:
312 	if (!IS_ERR(priv->phy))
313 		phy_exit(priv->phy);
314 err_phy_init:
315 err_phy_get:
316 	if (!IS_ERR(priv->clk))
317 		clk_disable_unprepare(priv->clk);
318 	usb_put_hcd(hcd);
319 err:
320 	dev_err(&pdev->dev, "init %s fail, %d\n",
321 		dev_name(&pdev->dev), err);
322 
323 	return err;
324 }
325 
326 static int ehci_orion_drv_remove(struct platform_device *pdev)
327 {
328 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
329 	struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd);
330 
331 	usb_remove_hcd(hcd);
332 
333 	if (!IS_ERR(priv->phy)) {
334 		phy_power_off(priv->phy);
335 		phy_exit(priv->phy);
336 	}
337 
338 	if (!IS_ERR(priv->clk))
339 		clk_disable_unprepare(priv->clk);
340 
341 	usb_put_hcd(hcd);
342 
343 	return 0;
344 }
345 
346 static const struct of_device_id ehci_orion_dt_ids[] = {
347 	{ .compatible = "marvell,orion-ehci", },
348 	{ .compatible = "marvell,armada-3700-ehci", },
349 	{},
350 };
351 MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
352 
353 static struct platform_driver ehci_orion_driver = {
354 	.probe		= ehci_orion_drv_probe,
355 	.remove		= ehci_orion_drv_remove,
356 	.shutdown	= usb_hcd_platform_shutdown,
357 	.driver = {
358 		.name	= "orion-ehci",
359 		.of_match_table = ehci_orion_dt_ids,
360 	},
361 };
362 
363 static int __init ehci_orion_init(void)
364 {
365 	if (usb_disabled())
366 		return -ENODEV;
367 
368 	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
369 
370 	ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
371 	return platform_driver_register(&ehci_orion_driver);
372 }
373 module_init(ehci_orion_init);
374 
375 static void __exit ehci_orion_cleanup(void)
376 {
377 	platform_driver_unregister(&ehci_orion_driver);
378 }
379 module_exit(ehci_orion_cleanup);
380 
381 MODULE_DESCRIPTION(DRIVER_DESC);
382 MODULE_ALIAS("platform:orion-ehci");
383 MODULE_AUTHOR("Tzachi Perelstein");
384 MODULE_LICENSE("GPL v2");
385