1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * drivers/usb/host/ehci-orion.c 4 * 5 * Tzachi Perelstein <tzachi@marvell.com> 6 */ 7 8 #include <linux/kernel.h> 9 #include <linux/module.h> 10 #include <linux/platform_device.h> 11 #include <linux/mbus.h> 12 #include <linux/clk.h> 13 #include <linux/platform_data/usb-ehci-orion.h> 14 #include <linux/of.h> 15 #include <linux/phy/phy.h> 16 #include <linux/of_device.h> 17 #include <linux/of_irq.h> 18 #include <linux/usb.h> 19 #include <linux/usb/hcd.h> 20 #include <linux/io.h> 21 #include <linux/dma-mapping.h> 22 23 #include "ehci.h" 24 25 #define rdl(off) readl_relaxed(hcd->regs + (off)) 26 #define wrl(off, val) writel_relaxed((val), hcd->regs + (off)) 27 28 #define USB_CMD 0x140 29 #define USB_CMD_RUN BIT(0) 30 #define USB_CMD_RESET BIT(1) 31 #define USB_MODE 0x1a8 32 #define USB_MODE_MASK GENMASK(1, 0) 33 #define USB_MODE_DEVICE 0x2 34 #define USB_MODE_HOST 0x3 35 #define USB_MODE_SDIS BIT(4) 36 #define USB_CAUSE 0x310 37 #define USB_MASK 0x314 38 #define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4)) 39 #define USB_WINDOW_BASE(i) (0x324 + ((i) << 4)) 40 #define USB_IPG 0x360 41 #define USB_PHY_PWR_CTRL 0x400 42 #define USB_PHY_TX_CTRL 0x420 43 #define USB_PHY_RX_CTRL 0x430 44 #define USB_PHY_IVREF_CTRL 0x440 45 #define USB_PHY_TST_GRP_CTRL 0x450 46 47 #define USB_SBUSCFG 0x90 48 49 /* BAWR = BARD = 3 : Align read/write bursts packets larger than 128 bytes */ 50 #define USB_SBUSCFG_BAWR_ALIGN_128B (0x3 << 6) 51 #define USB_SBUSCFG_BARD_ALIGN_128B (0x3 << 3) 52 /* AHBBRST = 3 : Align AHB Burst to INCR16 (64 bytes) */ 53 #define USB_SBUSCFG_AHBBRST_INCR16 (0x3 << 0) 54 55 #define USB_SBUSCFG_DEF_VAL (USB_SBUSCFG_BAWR_ALIGN_128B \ 56 | USB_SBUSCFG_BARD_ALIGN_128B \ 57 | USB_SBUSCFG_AHBBRST_INCR16) 58 59 #define DRIVER_DESC "EHCI orion driver" 60 61 #define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv) 62 63 struct orion_ehci_hcd { 64 struct clk *clk; 65 struct phy *phy; 66 }; 67 68 static const char hcd_name[] = "ehci-orion"; 69 70 static struct hc_driver __read_mostly ehci_orion_hc_driver; 71 72 /* 73 * Implement Orion USB controller specification guidelines 74 */ 75 static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) 76 { 77 /* The below GLs are according to the Orion Errata document */ 78 /* 79 * Clear interrupt cause and mask 80 */ 81 wrl(USB_CAUSE, 0); 82 wrl(USB_MASK, 0); 83 84 /* 85 * Reset controller 86 */ 87 wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET); 88 while (rdl(USB_CMD) & USB_CMD_RESET); 89 90 /* 91 * GL# USB-10: Set IPG for non start of frame packets 92 * Bits[14:8]=0xc 93 */ 94 wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00); 95 96 /* 97 * GL# USB-9: USB 2.0 Power Control 98 * BG_VSEL[7:6]=0x1 99 */ 100 wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40); 101 102 /* 103 * GL# USB-1: USB PHY Tx Control - force calibration to '8' 104 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8 105 */ 106 wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040); 107 108 /* 109 * GL# USB-3 GL# USB-9: USB PHY Rx Control 110 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0, 111 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1 112 */ 113 wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010); 114 115 /* 116 * GL# USB-3 GL# USB-9: USB PHY IVREF Control 117 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0 118 */ 119 wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32); 120 121 /* 122 * GL# USB-3 GL# USB-9: USB PHY Test Group Control 123 * REG_FIFO_SQ_RST[15]=0 124 */ 125 wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000); 126 127 /* 128 * Stop and reset controller 129 */ 130 wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN); 131 wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET); 132 while (rdl(USB_CMD) & USB_CMD_RESET); 133 134 /* 135 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1 136 * TBD: This need to be done after each reset! 137 * GL# USB-4 Setup USB Host mode 138 */ 139 wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST); 140 } 141 142 static void 143 ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, 144 const struct mbus_dram_target_info *dram) 145 { 146 int i; 147 148 for (i = 0; i < 4; i++) { 149 wrl(USB_WINDOW_CTRL(i), 0); 150 wrl(USB_WINDOW_BASE(i), 0); 151 } 152 153 for (i = 0; i < dram->num_cs; i++) { 154 const struct mbus_dram_window *cs = dram->cs + i; 155 156 wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) | 157 (cs->mbus_attr << 8) | 158 (dram->mbus_dram_target_id << 4) | 1); 159 wrl(USB_WINDOW_BASE(i), cs->base); 160 } 161 } 162 163 static int ehci_orion_drv_reset(struct usb_hcd *hcd) 164 { 165 struct device *dev = hcd->self.controller; 166 int ret; 167 168 ret = ehci_setup(hcd); 169 if (ret) 170 return ret; 171 172 /* 173 * For SoC without hlock, need to program sbuscfg value to guarantee 174 * AHB master's burst would not overrun or underrun FIFO. 175 * 176 * sbuscfg reg has to be set after usb controller reset, otherwise 177 * the value would be override to 0. 178 */ 179 if (of_device_is_compatible(dev->of_node, "marvell,armada-3700-ehci")) 180 wrl(USB_SBUSCFG, USB_SBUSCFG_DEF_VAL); 181 182 return ret; 183 } 184 185 static int __maybe_unused ehci_orion_drv_suspend(struct device *dev) 186 { 187 struct usb_hcd *hcd = dev_get_drvdata(dev); 188 189 return ehci_suspend(hcd, device_may_wakeup(dev)); 190 } 191 192 static int __maybe_unused ehci_orion_drv_resume(struct device *dev) 193 { 194 struct usb_hcd *hcd = dev_get_drvdata(dev); 195 196 return ehci_resume(hcd, false); 197 } 198 199 static SIMPLE_DEV_PM_OPS(ehci_orion_pm_ops, ehci_orion_drv_suspend, 200 ehci_orion_drv_resume); 201 202 static const struct ehci_driver_overrides orion_overrides __initconst = { 203 .extra_priv_size = sizeof(struct orion_ehci_hcd), 204 .reset = ehci_orion_drv_reset, 205 }; 206 207 static int ehci_orion_drv_probe(struct platform_device *pdev) 208 { 209 struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev); 210 const struct mbus_dram_target_info *dram; 211 struct resource *res; 212 struct usb_hcd *hcd; 213 struct ehci_hcd *ehci; 214 void __iomem *regs; 215 int irq, err; 216 enum orion_ehci_phy_ver phy_version; 217 struct orion_ehci_hcd *priv; 218 219 if (usb_disabled()) 220 return -ENODEV; 221 222 pr_debug("Initializing Orion-SoC USB Host Controller\n"); 223 224 irq = platform_get_irq(pdev, 0); 225 if (irq <= 0) { 226 err = -ENODEV; 227 goto err; 228 } 229 230 /* 231 * Right now device-tree probed devices don't get dma_mask 232 * set. Since shared usb code relies on it, set it here for 233 * now. Once we have dma capability bindings this can go away. 234 */ 235 err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); 236 if (err) 237 goto err; 238 239 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 240 regs = devm_ioremap_resource(&pdev->dev, res); 241 if (IS_ERR(regs)) { 242 err = PTR_ERR(regs); 243 goto err; 244 } 245 246 hcd = usb_create_hcd(&ehci_orion_hc_driver, 247 &pdev->dev, dev_name(&pdev->dev)); 248 if (!hcd) { 249 err = -ENOMEM; 250 goto err; 251 } 252 253 hcd->rsrc_start = res->start; 254 hcd->rsrc_len = resource_size(res); 255 hcd->regs = regs; 256 257 ehci = hcd_to_ehci(hcd); 258 ehci->caps = hcd->regs + 0x100; 259 hcd->has_tt = 1; 260 261 priv = hcd_to_orion_priv(hcd); 262 /* 263 * Not all platforms can gate the clock, so it is not an error if 264 * the clock does not exists. 265 */ 266 priv->clk = devm_clk_get(&pdev->dev, NULL); 267 if (!IS_ERR(priv->clk)) 268 clk_prepare_enable(priv->clk); 269 270 priv->phy = devm_phy_optional_get(&pdev->dev, "usb"); 271 if (IS_ERR(priv->phy)) { 272 err = PTR_ERR(priv->phy); 273 if (err != -ENOSYS) 274 goto err_dis_clk; 275 } 276 277 /* 278 * (Re-)program MBUS remapping windows if we are asked to. 279 */ 280 dram = mv_mbus_dram_info(); 281 if (dram) 282 ehci_orion_conf_mbus_windows(hcd, dram); 283 284 /* 285 * setup Orion USB controller. 286 */ 287 if (pdev->dev.of_node) 288 phy_version = EHCI_PHY_NA; 289 else 290 phy_version = pd->phy_version; 291 292 switch (phy_version) { 293 case EHCI_PHY_NA: /* dont change USB phy settings */ 294 break; 295 case EHCI_PHY_ORION: 296 orion_usb_phy_v1_setup(hcd); 297 break; 298 case EHCI_PHY_DD: 299 case EHCI_PHY_KW: 300 default: 301 dev_warn(&pdev->dev, "USB phy version isn't supported.\n"); 302 } 303 304 err = usb_add_hcd(hcd, irq, IRQF_SHARED); 305 if (err) 306 goto err_dis_clk; 307 308 device_wakeup_enable(hcd->self.controller); 309 return 0; 310 311 err_dis_clk: 312 if (!IS_ERR(priv->clk)) 313 clk_disable_unprepare(priv->clk); 314 usb_put_hcd(hcd); 315 err: 316 dev_err(&pdev->dev, "init %s fail, %d\n", 317 dev_name(&pdev->dev), err); 318 319 return err; 320 } 321 322 static int ehci_orion_drv_remove(struct platform_device *pdev) 323 { 324 struct usb_hcd *hcd = platform_get_drvdata(pdev); 325 struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd); 326 327 usb_remove_hcd(hcd); 328 329 if (!IS_ERR(priv->clk)) 330 clk_disable_unprepare(priv->clk); 331 332 usb_put_hcd(hcd); 333 334 return 0; 335 } 336 337 static const struct of_device_id ehci_orion_dt_ids[] = { 338 { .compatible = "marvell,orion-ehci", }, 339 { .compatible = "marvell,armada-3700-ehci", }, 340 {}, 341 }; 342 MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids); 343 344 static struct platform_driver ehci_orion_driver = { 345 .probe = ehci_orion_drv_probe, 346 .remove = ehci_orion_drv_remove, 347 .shutdown = usb_hcd_platform_shutdown, 348 .driver = { 349 .name = "orion-ehci", 350 .of_match_table = ehci_orion_dt_ids, 351 .pm = &ehci_orion_pm_ops, 352 }, 353 }; 354 355 static int __init ehci_orion_init(void) 356 { 357 if (usb_disabled()) 358 return -ENODEV; 359 360 pr_info("%s: " DRIVER_DESC "\n", hcd_name); 361 362 ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides); 363 return platform_driver_register(&ehci_orion_driver); 364 } 365 module_init(ehci_orion_init); 366 367 static void __exit ehci_orion_cleanup(void) 368 { 369 platform_driver_unregister(&ehci_orion_driver); 370 } 371 module_exit(ehci_orion_cleanup); 372 373 MODULE_DESCRIPTION(DRIVER_DESC); 374 MODULE_ALIAS("platform:orion-ehci"); 375 MODULE_AUTHOR("Tzachi Perelstein"); 376 MODULE_LICENSE("GPL v2"); 377