1 /* 2 * Copyright 2005-2009 MontaVista Software, Inc. 3 * Copyright 2008,2012 Freescale Semiconductor, Inc. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License as published by the 7 * Free Software Foundation; either version 2 of the License, or (at your 8 * option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, but 11 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 12 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 13 * for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software Foundation, 17 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 18 * 19 * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided 20 * by Hunter Wu. 21 * Power Management support by Dave Liu <daveliu@freescale.com>, 22 * Jerry Huang <Chang-Ming.Huang@freescale.com> and 23 * Anton Vorontsov <avorontsov@ru.mvista.com>. 24 */ 25 26 #include <linux/kernel.h> 27 #include <linux/types.h> 28 #include <linux/delay.h> 29 #include <linux/pm.h> 30 #include <linux/err.h> 31 #include <linux/platform_device.h> 32 #include <linux/fsl_devices.h> 33 34 #include "ehci-fsl.h" 35 36 /* configure so an HC device and id are always provided */ 37 /* always called with process context; sleeping is OK */ 38 39 /** 40 * usb_hcd_fsl_probe - initialize FSL-based HCDs 41 * @drvier: Driver to be used for this HCD 42 * @pdev: USB Host Controller being probed 43 * Context: !in_interrupt() 44 * 45 * Allocates basic resources for this USB host controller. 46 * 47 */ 48 static int usb_hcd_fsl_probe(const struct hc_driver *driver, 49 struct platform_device *pdev) 50 { 51 struct fsl_usb2_platform_data *pdata; 52 struct usb_hcd *hcd; 53 struct resource *res; 54 int irq; 55 int retval; 56 57 pr_debug("initializing FSL-SOC USB Controller\n"); 58 59 /* Need platform data for setup */ 60 pdata = dev_get_platdata(&pdev->dev); 61 if (!pdata) { 62 dev_err(&pdev->dev, 63 "No platform data for %s.\n", dev_name(&pdev->dev)); 64 return -ENODEV; 65 } 66 67 /* 68 * This is a host mode driver, verify that we're supposed to be 69 * in host mode. 70 */ 71 if (!((pdata->operating_mode == FSL_USB2_DR_HOST) || 72 (pdata->operating_mode == FSL_USB2_MPH_HOST) || 73 (pdata->operating_mode == FSL_USB2_DR_OTG))) { 74 dev_err(&pdev->dev, 75 "Non Host Mode configured for %s. Wrong driver linked.\n", 76 dev_name(&pdev->dev)); 77 return -ENODEV; 78 } 79 80 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 81 if (!res) { 82 dev_err(&pdev->dev, 83 "Found HC with no IRQ. Check %s setup!\n", 84 dev_name(&pdev->dev)); 85 return -ENODEV; 86 } 87 irq = res->start; 88 89 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); 90 if (!hcd) { 91 retval = -ENOMEM; 92 goto err1; 93 } 94 95 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 96 if (!res) { 97 dev_err(&pdev->dev, 98 "Found HC with no register addr. Check %s setup!\n", 99 dev_name(&pdev->dev)); 100 retval = -ENODEV; 101 goto err2; 102 } 103 hcd->rsrc_start = res->start; 104 hcd->rsrc_len = resource_size(res); 105 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, 106 driver->description)) { 107 dev_dbg(&pdev->dev, "controller already in use\n"); 108 retval = -EBUSY; 109 goto err2; 110 } 111 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); 112 113 if (hcd->regs == NULL) { 114 dev_dbg(&pdev->dev, "error mapping memory\n"); 115 retval = -EFAULT; 116 goto err3; 117 } 118 119 pdata->regs = hcd->regs; 120 121 if (pdata->power_budget) 122 hcd->power_budget = pdata->power_budget; 123 124 /* 125 * do platform specific init: check the clock, grab/config pins, etc. 126 */ 127 if (pdata->init && pdata->init(pdev)) { 128 retval = -ENODEV; 129 goto err4; 130 } 131 132 /* Enable USB controller, 83xx or 8536 */ 133 if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) 134 setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4); 135 136 /* Don't need to set host mode here. It will be done by tdi_reset() */ 137 138 retval = usb_add_hcd(hcd, irq, IRQF_SHARED); 139 if (retval != 0) 140 goto err4; 141 142 #ifdef CONFIG_USB_OTG 143 if (pdata->operating_mode == FSL_USB2_DR_OTG) { 144 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 145 146 hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2); 147 dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n", 148 hcd, ehci, hcd->phy); 149 150 if (!IS_ERR_OR_NULL(hcd->phy)) { 151 retval = otg_set_host(hcd->phy->otg, 152 &ehci_to_hcd(ehci)->self); 153 if (retval) { 154 usb_put_phy(hcd->phy); 155 goto err4; 156 } 157 } else { 158 dev_err(&pdev->dev, "can't find phy\n"); 159 retval = -ENODEV; 160 goto err4; 161 } 162 } 163 #endif 164 return retval; 165 166 err4: 167 iounmap(hcd->regs); 168 err3: 169 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 170 err2: 171 usb_put_hcd(hcd); 172 err1: 173 dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval); 174 if (pdata->exit) 175 pdata->exit(pdev); 176 return retval; 177 } 178 179 /* may be called without controller electrically present */ 180 /* may be called with controller, bus, and devices active */ 181 182 /** 183 * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs 184 * @dev: USB Host Controller being removed 185 * Context: !in_interrupt() 186 * 187 * Reverses the effect of usb_hcd_fsl_probe(). 188 * 189 */ 190 static void usb_hcd_fsl_remove(struct usb_hcd *hcd, 191 struct platform_device *pdev) 192 { 193 struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); 194 195 if (!IS_ERR_OR_NULL(hcd->phy)) { 196 otg_set_host(hcd->phy->otg, NULL); 197 usb_put_phy(hcd->phy); 198 } 199 200 usb_remove_hcd(hcd); 201 202 /* 203 * do platform specific un-initialization: 204 * release iomux pins, disable clock, etc. 205 */ 206 if (pdata->exit) 207 pdata->exit(pdev); 208 iounmap(hcd->regs); 209 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 210 usb_put_hcd(hcd); 211 } 212 213 static int ehci_fsl_setup_phy(struct usb_hcd *hcd, 214 enum fsl_usb2_phy_modes phy_mode, 215 unsigned int port_offset) 216 { 217 u32 portsc; 218 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 219 void __iomem *non_ehci = hcd->regs; 220 struct device *dev = hcd->self.controller; 221 struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev); 222 223 if (pdata->controller_ver < 0) { 224 dev_warn(hcd->self.controller, "Could not get controller version\n"); 225 return -ENODEV; 226 } 227 228 portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); 229 portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); 230 231 switch (phy_mode) { 232 case FSL_USB2_PHY_ULPI: 233 if (pdata->have_sysif_regs && pdata->controller_ver) { 234 /* controller version 1.6 or above */ 235 clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); 236 setbits32(non_ehci + FSL_SOC_USB_CTRL, 237 ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN); 238 } 239 portsc |= PORT_PTS_ULPI; 240 break; 241 case FSL_USB2_PHY_SERIAL: 242 portsc |= PORT_PTS_SERIAL; 243 break; 244 case FSL_USB2_PHY_UTMI_WIDE: 245 portsc |= PORT_PTS_PTW; 246 /* fall through */ 247 case FSL_USB2_PHY_UTMI: 248 if (pdata->have_sysif_regs && pdata->controller_ver) { 249 /* controller version 1.6 or above */ 250 setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); 251 mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to 252 become stable - 10ms*/ 253 } 254 /* enable UTMI PHY */ 255 if (pdata->have_sysif_regs) 256 setbits32(non_ehci + FSL_SOC_USB_CTRL, 257 CTRL_UTMI_PHY_EN); 258 portsc |= PORT_PTS_UTMI; 259 break; 260 case FSL_USB2_PHY_NONE: 261 break; 262 } 263 264 if (pdata->have_sysif_regs && pdata->controller_ver && 265 (phy_mode == FSL_USB2_PHY_ULPI)) { 266 /* check PHY_CLK_VALID to get phy clk valid */ 267 if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & 268 PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0) || 269 in_be32(non_ehci + FSL_SOC_USB_PRICTRL))) { 270 printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n"); 271 return -EINVAL; 272 } 273 } 274 275 ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); 276 277 if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) 278 setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN); 279 280 return 0; 281 } 282 283 static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) 284 { 285 struct usb_hcd *hcd = ehci_to_hcd(ehci); 286 struct fsl_usb2_platform_data *pdata; 287 void __iomem *non_ehci = hcd->regs; 288 289 pdata = dev_get_platdata(hcd->self.controller); 290 291 if (pdata->have_sysif_regs) { 292 /* 293 * Turn on cache snooping hardware, since some PowerPC platforms 294 * wholly rely on hardware to deal with cache coherent 295 */ 296 297 /* Setup Snooping for all the 4GB space */ 298 /* SNOOP1 starts from 0x0, size 2G */ 299 out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB); 300 /* SNOOP2 starts from 0x80000000, size 2G */ 301 out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB); 302 } 303 304 if ((pdata->operating_mode == FSL_USB2_DR_HOST) || 305 (pdata->operating_mode == FSL_USB2_DR_OTG)) 306 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) 307 return -EINVAL; 308 309 if (pdata->operating_mode == FSL_USB2_MPH_HOST) { 310 unsigned int chip, rev, svr; 311 312 svr = mfspr(SPRN_SVR); 313 chip = svr >> 16; 314 rev = (svr >> 4) & 0xf; 315 316 /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */ 317 if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055)) 318 ehci->has_fsl_port_bug = 1; 319 320 if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) 321 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) 322 return -EINVAL; 323 324 if (pdata->port_enables & FSL_USB2_PORT1_ENABLED) 325 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1)) 326 return -EINVAL; 327 } 328 329 if (pdata->have_sysif_regs) { 330 #ifdef CONFIG_FSL_SOC_BOOKE 331 out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008); 332 out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080); 333 #else 334 out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c); 335 out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040); 336 #endif 337 out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001); 338 } 339 340 return 0; 341 } 342 343 /* called after powerup, by probe or system-pm "wakeup" */ 344 static int ehci_fsl_reinit(struct ehci_hcd *ehci) 345 { 346 if (ehci_fsl_usb_setup(ehci)) 347 return -EINVAL; 348 349 return 0; 350 } 351 352 /* called during probe() after chip reset completes */ 353 static int ehci_fsl_setup(struct usb_hcd *hcd) 354 { 355 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 356 int retval; 357 struct fsl_usb2_platform_data *pdata; 358 struct device *dev; 359 360 dev = hcd->self.controller; 361 pdata = dev_get_platdata(hcd->self.controller); 362 ehci->big_endian_desc = pdata->big_endian_desc; 363 ehci->big_endian_mmio = pdata->big_endian_mmio; 364 365 /* EHCI registers start at offset 0x100 */ 366 ehci->caps = hcd->regs + 0x100; 367 368 #ifdef CONFIG_PPC_83xx 369 /* 370 * Deal with MPC834X that need port power to be cycled after the power 371 * fault condition is removed. Otherwise the state machine does not 372 * reflect PORTSC[CSC] correctly. 373 */ 374 ehci->need_oc_pp_cycle = 1; 375 #endif 376 377 hcd->has_tt = 1; 378 379 retval = ehci_setup(hcd); 380 if (retval) 381 return retval; 382 383 if (of_device_is_compatible(dev->parent->of_node, 384 "fsl,mpc5121-usb2-dr")) { 385 /* 386 * set SBUSCFG:AHBBRST so that control msgs don't 387 * fail when doing heavy PATA writes. 388 */ 389 ehci_writel(ehci, SBUSCFG_INCR8, 390 hcd->regs + FSL_SOC_USB_SBUSCFG); 391 } 392 393 retval = ehci_fsl_reinit(ehci); 394 return retval; 395 } 396 397 struct ehci_fsl { 398 struct ehci_hcd ehci; 399 400 #ifdef CONFIG_PM 401 /* Saved USB PHY settings, need to restore after deep sleep. */ 402 u32 usb_ctrl; 403 #endif 404 }; 405 406 #ifdef CONFIG_PM 407 408 #ifdef CONFIG_PPC_MPC512x 409 static int ehci_fsl_mpc512x_drv_suspend(struct device *dev) 410 { 411 struct usb_hcd *hcd = dev_get_drvdata(dev); 412 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 413 struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev); 414 u32 tmp; 415 416 #if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG) 417 u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE); 418 mode &= USBMODE_CM_MASK; 419 tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */ 420 421 dev_dbg(dev, "suspend=%d already_suspended=%d " 422 "mode=%d usbcmd %08x\n", pdata->suspended, 423 pdata->already_suspended, mode, tmp); 424 #endif 425 426 /* 427 * If the controller is already suspended, then this must be a 428 * PM suspend. Remember this fact, so that we will leave the 429 * controller suspended at PM resume time. 430 */ 431 if (pdata->suspended) { 432 dev_dbg(dev, "already suspended, leaving early\n"); 433 pdata->already_suspended = 1; 434 return 0; 435 } 436 437 dev_dbg(dev, "suspending...\n"); 438 439 ehci->rh_state = EHCI_RH_SUSPENDED; 440 dev->power.power_state = PMSG_SUSPEND; 441 442 /* ignore non-host interrupts */ 443 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 444 445 /* stop the controller */ 446 tmp = ehci_readl(ehci, &ehci->regs->command); 447 tmp &= ~CMD_RUN; 448 ehci_writel(ehci, tmp, &ehci->regs->command); 449 450 /* save EHCI registers */ 451 pdata->pm_command = ehci_readl(ehci, &ehci->regs->command); 452 pdata->pm_command &= ~CMD_RUN; 453 pdata->pm_status = ehci_readl(ehci, &ehci->regs->status); 454 pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable); 455 pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index); 456 pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment); 457 pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list); 458 pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next); 459 pdata->pm_configured_flag = 460 ehci_readl(ehci, &ehci->regs->configured_flag); 461 pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]); 462 pdata->pm_usbgenctrl = ehci_readl(ehci, 463 hcd->regs + FSL_SOC_USB_USBGENCTRL); 464 465 /* clear the W1C bits */ 466 pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS); 467 468 pdata->suspended = 1; 469 470 /* clear PP to cut power to the port */ 471 tmp = ehci_readl(ehci, &ehci->regs->port_status[0]); 472 tmp &= ~PORT_POWER; 473 ehci_writel(ehci, tmp, &ehci->regs->port_status[0]); 474 475 return 0; 476 } 477 478 static int ehci_fsl_mpc512x_drv_resume(struct device *dev) 479 { 480 struct usb_hcd *hcd = dev_get_drvdata(dev); 481 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 482 struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev); 483 u32 tmp; 484 485 dev_dbg(dev, "suspend=%d already_suspended=%d\n", 486 pdata->suspended, pdata->already_suspended); 487 488 /* 489 * If the controller was already suspended at suspend time, 490 * then don't resume it now. 491 */ 492 if (pdata->already_suspended) { 493 dev_dbg(dev, "already suspended, leaving early\n"); 494 pdata->already_suspended = 0; 495 return 0; 496 } 497 498 if (!pdata->suspended) { 499 dev_dbg(dev, "not suspended, leaving early\n"); 500 return 0; 501 } 502 503 pdata->suspended = 0; 504 505 dev_dbg(dev, "resuming...\n"); 506 507 /* set host mode */ 508 tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0); 509 ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE); 510 511 ehci_writel(ehci, pdata->pm_usbgenctrl, 512 hcd->regs + FSL_SOC_USB_USBGENCTRL); 513 ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE, 514 hcd->regs + FSL_SOC_USB_ISIPHYCTRL); 515 516 ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG); 517 518 /* restore EHCI registers */ 519 ehci_writel(ehci, pdata->pm_command, &ehci->regs->command); 520 ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable); 521 ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index); 522 ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment); 523 ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list); 524 ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next); 525 ehci_writel(ehci, pdata->pm_configured_flag, 526 &ehci->regs->configured_flag); 527 ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]); 528 529 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 530 ehci->rh_state = EHCI_RH_RUNNING; 531 dev->power.power_state = PMSG_ON; 532 533 tmp = ehci_readl(ehci, &ehci->regs->command); 534 tmp |= CMD_RUN; 535 ehci_writel(ehci, tmp, &ehci->regs->command); 536 537 usb_hcd_resume_root_hub(hcd); 538 539 return 0; 540 } 541 #else 542 static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev) 543 { 544 return 0; 545 } 546 547 static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev) 548 { 549 return 0; 550 } 551 #endif /* CONFIG_PPC_MPC512x */ 552 553 static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd) 554 { 555 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 556 557 return container_of(ehci, struct ehci_fsl, ehci); 558 } 559 560 static int ehci_fsl_drv_suspend(struct device *dev) 561 { 562 struct usb_hcd *hcd = dev_get_drvdata(dev); 563 struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); 564 void __iomem *non_ehci = hcd->regs; 565 566 if (of_device_is_compatible(dev->parent->of_node, 567 "fsl,mpc5121-usb2-dr")) { 568 return ehci_fsl_mpc512x_drv_suspend(dev); 569 } 570 571 ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), 572 device_may_wakeup(dev)); 573 if (!fsl_deep_sleep()) 574 return 0; 575 576 ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL); 577 return 0; 578 } 579 580 static int ehci_fsl_drv_resume(struct device *dev) 581 { 582 struct usb_hcd *hcd = dev_get_drvdata(dev); 583 struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); 584 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 585 void __iomem *non_ehci = hcd->regs; 586 587 if (of_device_is_compatible(dev->parent->of_node, 588 "fsl,mpc5121-usb2-dr")) { 589 return ehci_fsl_mpc512x_drv_resume(dev); 590 } 591 592 ehci_prepare_ports_for_controller_resume(ehci); 593 if (!fsl_deep_sleep()) 594 return 0; 595 596 usb_root_hub_lost_power(hcd->self.root_hub); 597 598 /* Restore USB PHY settings and enable the controller. */ 599 out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl); 600 601 ehci_reset(ehci); 602 ehci_fsl_reinit(ehci); 603 604 return 0; 605 } 606 607 static int ehci_fsl_drv_restore(struct device *dev) 608 { 609 struct usb_hcd *hcd = dev_get_drvdata(dev); 610 611 usb_root_hub_lost_power(hcd->self.root_hub); 612 return 0; 613 } 614 615 static struct dev_pm_ops ehci_fsl_pm_ops = { 616 .suspend = ehci_fsl_drv_suspend, 617 .resume = ehci_fsl_drv_resume, 618 .restore = ehci_fsl_drv_restore, 619 }; 620 621 #define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops) 622 #else 623 #define EHCI_FSL_PM_OPS NULL 624 #endif /* CONFIG_PM */ 625 626 #ifdef CONFIG_USB_OTG 627 static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port) 628 { 629 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 630 u32 status; 631 632 if (!port) 633 return -EINVAL; 634 635 port--; 636 637 /* start port reset before HNP protocol time out */ 638 status = readl(&ehci->regs->port_status[port]); 639 if (!(status & PORT_CONNECT)) 640 return -ENODEV; 641 642 /* khubd will finish the reset later */ 643 if (ehci_is_TDI(ehci)) { 644 writel(PORT_RESET | 645 (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)), 646 &ehci->regs->port_status[port]); 647 } else { 648 writel(PORT_RESET, &ehci->regs->port_status[port]); 649 } 650 651 return 0; 652 } 653 #else 654 #define ehci_start_port_reset NULL 655 #endif /* CONFIG_USB_OTG */ 656 657 658 static const struct hc_driver ehci_fsl_hc_driver = { 659 .description = hcd_name, 660 .product_desc = "Freescale On-Chip EHCI Host Controller", 661 .hcd_priv_size = sizeof(struct ehci_fsl), 662 663 /* 664 * generic hardware linkage 665 */ 666 .irq = ehci_irq, 667 .flags = HCD_USB2 | HCD_MEMORY | HCD_BH, 668 669 /* 670 * basic lifecycle operations 671 */ 672 .reset = ehci_fsl_setup, 673 .start = ehci_run, 674 .stop = ehci_stop, 675 .shutdown = ehci_shutdown, 676 677 /* 678 * managing i/o requests and associated device resources 679 */ 680 .urb_enqueue = ehci_urb_enqueue, 681 .urb_dequeue = ehci_urb_dequeue, 682 .endpoint_disable = ehci_endpoint_disable, 683 .endpoint_reset = ehci_endpoint_reset, 684 685 /* 686 * scheduling support 687 */ 688 .get_frame_number = ehci_get_frame, 689 690 /* 691 * root hub support 692 */ 693 .hub_status_data = ehci_hub_status_data, 694 .hub_control = ehci_hub_control, 695 .bus_suspend = ehci_bus_suspend, 696 .bus_resume = ehci_bus_resume, 697 .start_port_reset = ehci_start_port_reset, 698 .relinquish_port = ehci_relinquish_port, 699 .port_handed_over = ehci_port_handed_over, 700 701 .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, 702 }; 703 704 static int ehci_fsl_drv_probe(struct platform_device *pdev) 705 { 706 if (usb_disabled()) 707 return -ENODEV; 708 709 /* FIXME we only want one one probe() not two */ 710 return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev); 711 } 712 713 static int ehci_fsl_drv_remove(struct platform_device *pdev) 714 { 715 struct usb_hcd *hcd = platform_get_drvdata(pdev); 716 717 /* FIXME we only want one one remove() not two */ 718 usb_hcd_fsl_remove(hcd, pdev); 719 return 0; 720 } 721 722 MODULE_ALIAS("platform:fsl-ehci"); 723 724 static struct platform_driver ehci_fsl_driver = { 725 .probe = ehci_fsl_drv_probe, 726 .remove = ehci_fsl_drv_remove, 727 .shutdown = usb_hcd_platform_shutdown, 728 .driver = { 729 .name = "fsl-ehci", 730 .owner = THIS_MODULE, 731 .pm = EHCI_FSL_PM_OPS, 732 }, 733 }; 734