1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * linux/drivers/usb/gadget/pxa27x_udc.h 4 * Intel PXA27x on-chip full speed USB device controller 5 * 6 * Inspired by original driver by Frank Becker, David Brownell, and others. 7 * Copyright (C) 2008 Robert Jarzmik 8 */ 9 10 #ifndef __LINUX_USB_GADGET_PXA27X_H 11 #define __LINUX_USB_GADGET_PXA27X_H 12 13 #include <linux/types.h> 14 #include <linux/spinlock.h> 15 #include <linux/io.h> 16 #include <linux/usb/otg.h> 17 18 /* 19 * Register definitions 20 */ 21 /* Offsets */ 22 #define UDCCR 0x0000 /* UDC Control Register */ 23 #define UDCICR0 0x0004 /* UDC Interrupt Control Register0 */ 24 #define UDCICR1 0x0008 /* UDC Interrupt Control Register1 */ 25 #define UDCISR0 0x000C /* UDC Interrupt Status Register 0 */ 26 #define UDCISR1 0x0010 /* UDC Interrupt Status Register 1 */ 27 #define UDCFNR 0x0014 /* UDC Frame Number Register */ 28 #define UDCOTGICR 0x0018 /* UDC On-The-Go interrupt control */ 29 #define UP2OCR 0x0020 /* USB Port 2 Output Control register */ 30 #define UP3OCR 0x0024 /* USB Port 3 Output Control register */ 31 #define UDCCSRn(x) (0x0100 + ((x)<<2)) /* UDC Control/Status register */ 32 #define UDCBCRn(x) (0x0200 + ((x)<<2)) /* UDC Byte Count Register */ 33 #define UDCDRn(x) (0x0300 + ((x)<<2)) /* UDC Data Register */ 34 #define UDCCRn(x) (0x0400 + ((x)<<2)) /* UDC Control Register */ 35 36 #define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ 37 #define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation 38 Protocol Port Support */ 39 #define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol 40 Support */ 41 #define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol 42 Enable */ 43 #define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ 44 #define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ 45 #define UDCCR_ACN_S 11 46 #define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ 47 #define UDCCR_AIN_S 8 48 #define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface 49 Setting Number */ 50 #define UDCCR_AAISN_S 5 51 #define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active 52 Configuration */ 53 #define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration 54 Error */ 55 #define UDCCR_UDR (1 << 2) /* UDC Resume */ 56 #define UDCCR_UDA (1 << 1) /* UDC Active */ 57 #define UDCCR_UDE (1 << 0) /* UDC Enable */ 58 59 #define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) 60 #define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ 61 #define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ 62 #define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ 63 #define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ 64 #define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ 65 #define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ 66 #define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ 67 #define UDCICR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL) 68 69 #define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) 70 #define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */ 71 #define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */ 72 #define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */ 73 #define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */ 74 #define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */ 75 #define UDCISR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL) 76 77 #define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ 78 #define UDCOTGICR_IEXR (1 << 17) /* Extra Transceiver Interrupt 79 Rising Edge Interrupt Enable */ 80 #define UDCOTGICR_IEXF (1 << 16) /* Extra Transceiver Interrupt 81 Falling Edge Interrupt Enable */ 82 #define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge 83 Interrupt Enable */ 84 #define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge 85 Interrupt Enable */ 86 #define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge 87 Interrupt Enable */ 88 #define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge 89 Interrupt Enable */ 90 #define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge 91 Interrupt Enable */ 92 #define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge 93 Interrupt Enable */ 94 #define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising 95 Edge Interrupt Enable */ 96 #define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling 97 Edge Interrupt Enable */ 98 #define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge 99 Interrupt Enable */ 100 #define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge 101 Interrupt Enable */ 102 103 /* Host Port 2 field bits */ 104 #define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */ 105 #define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */ 106 /* Transceiver enablers */ 107 #define UP2OCR_DPPDE (1 << 2) /* D+ Pull Down Enable */ 108 #define UP2OCR_DMPDE (1 << 3) /* D- Pull Down Enable */ 109 #define UP2OCR_DPPUE (1 << 4) /* D+ Pull Up Enable */ 110 #define UP2OCR_DMPUE (1 << 5) /* D- Pull Up Enable */ 111 #define UP2OCR_DPPUBE (1 << 6) /* D+ Pull Up Bypass Enable */ 112 #define UP2OCR_DMPUBE (1 << 7) /* D- Pull Up Bypass Enable */ 113 #define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */ 114 #define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */ 115 #define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ 116 #define UP2OCR_HXS (1 << 16) /* Transceiver Output Select */ 117 #define UP2OCR_HXOE (1 << 17) /* Transceiver Output Enable */ 118 #define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */ 119 120 #define UDCCSR0_ACM (1 << 9) /* Ack Control Mode */ 121 #define UDCCSR0_AREN (1 << 8) /* Ack Response Enable */ 122 #define UDCCSR0_SA (1 << 7) /* Setup Active */ 123 #define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ 124 #define UDCCSR0_FST (1 << 5) /* Force Stall */ 125 #define UDCCSR0_SST (1 << 4) /* Sent Stall */ 126 #define UDCCSR0_DME (1 << 3) /* DMA Enable */ 127 #define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ 128 #define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ 129 #define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ 130 131 #define UDCCSR_DPE (1 << 9) /* Data Packet Error */ 132 #define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ 133 #define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ 134 #define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ 135 #define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ 136 #define UDCCSR_FST (1 << 5) /* Force STALL */ 137 #define UDCCSR_SST (1 << 4) /* Sent STALL */ 138 #define UDCCSR_DME (1 << 3) /* DMA Enable */ 139 #define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ 140 #define UDCCSR_PC (1 << 1) /* Packet Complete */ 141 #define UDCCSR_FS (1 << 0) /* FIFO needs service */ 142 143 #define UDCCONR_CN (0x03 << 25) /* Configuration Number */ 144 #define UDCCONR_CN_S 25 145 #define UDCCONR_IN (0x07 << 22) /* Interface Number */ 146 #define UDCCONR_IN_S 22 147 #define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ 148 #define UDCCONR_AISN_S 19 149 #define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ 150 #define UDCCONR_EN_S 15 151 #define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ 152 #define UDCCONR_ET_S 13 153 #define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ 154 #define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ 155 #define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ 156 #define UDCCONR_ET_NU (0x00 << 13) /* Not used */ 157 #define UDCCONR_ED (1 << 12) /* Endpoint Direction */ 158 #define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ 159 #define UDCCONR_MPS_S 2 160 #define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ 161 #define UDCCONR_EE (1 << 0) /* Endpoint Enable */ 162 163 #define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_SMAC | UDCCR_UDR | UDCCR_UDE) 164 #define UDCCSR_WR_MASK (UDCCSR_DME | UDCCSR_FST) 165 #define UDC_FNR_MASK (0x7ff) 166 #define UDC_BCR_MASK (0x3ff) 167 168 /* 169 * UDCCR = UDC Endpoint Configuration Registers 170 * UDCCSR = UDC Control/Status Register for this EP 171 * UDCBCR = UDC Byte Count Remaining (contents of OUT fifo) 172 * UDCDR = UDC Endpoint Data Register (the fifo) 173 */ 174 #define ofs_UDCCR(ep) (UDCCRn(ep->idx)) 175 #define ofs_UDCCSR(ep) (UDCCSRn(ep->idx)) 176 #define ofs_UDCBCR(ep) (UDCBCRn(ep->idx)) 177 #define ofs_UDCDR(ep) (UDCDRn(ep->idx)) 178 179 /* Register access macros */ 180 #define udc_ep_readl(ep, reg) \ 181 __raw_readl((ep)->dev->regs + ofs_##reg(ep)) 182 #define udc_ep_writel(ep, reg, value) \ 183 __raw_writel((value), ep->dev->regs + ofs_##reg(ep)) 184 #define udc_ep_readb(ep, reg) \ 185 __raw_readb((ep)->dev->regs + ofs_##reg(ep)) 186 #define udc_ep_writeb(ep, reg, value) \ 187 __raw_writeb((value), ep->dev->regs + ofs_##reg(ep)) 188 #define udc_readl(dev, reg) \ 189 __raw_readl((dev)->regs + (reg)) 190 #define udc_writel(udc, reg, value) \ 191 __raw_writel((value), (udc)->regs + (reg)) 192 193 #define UDCCSR_MASK (UDCCSR_FST | UDCCSR_DME) 194 #define UDCCISR0_EP_MASK ~0 195 #define UDCCISR1_EP_MASK 0xffff 196 #define UDCCSR0_CTRL_REQ_MASK (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE) 197 198 #define EPIDX(ep) (ep->idx) 199 #define EPADDR(ep) (ep->addr) 200 #define EPXFERTYPE(ep) (ep->type) 201 #define EPNAME(ep) (ep->name) 202 #define is_ep0(ep) (!ep->idx) 203 #define EPXFERTYPE_is_ISO(ep) (EPXFERTYPE(ep) == USB_ENDPOINT_XFER_ISOC) 204 205 /* 206 * Endpoint definitions 207 * 208 * Once enabled, pxa endpoint configuration is freezed, and cannot change 209 * unless a reset happens or the udc is disabled. 210 * Therefore, we must define all pxa potential endpoint definitions needed for 211 * all gadget and set them up before the udc is enabled. 212 * 213 * As the architecture chosen is fully static, meaning the pxa endpoint 214 * configurations are set up once and for all, we must provide a way to match 215 * one usb endpoint (usb_ep) to several pxa endpoints. The reason is that gadget 216 * layer autoconf doesn't choose the usb_ep endpoint on (config, interface, alt) 217 * criteria, while the pxa architecture requires that. 218 * 219 * The solution is to define several pxa endpoints matching one usb_ep. Ex: 220 * - "ep1-in" matches pxa endpoint EPA (which is an IN ep at addr 1, when 221 * the udc talks on (config=3, interface=0, alt=0) 222 * - "ep1-in" matches pxa endpoint EPB (which is an IN ep at addr 1, when 223 * the udc talks on (config=3, interface=0, alt=1) 224 * - "ep1-in" matches pxa endpoint EPC (which is an IN ep at addr 1, when 225 * the udc talks on (config=2, interface=0, alt=0) 226 * 227 * We'll define the pxa endpoint by its index (EPA => idx=1, EPB => idx=2, ...) 228 */ 229 230 /* 231 * Endpoint definition helpers 232 */ 233 #define USB_EP_DEF(addr, bname, dir, type, maxpkt, ctype, cdir) \ 234 { .usb_ep = { .name = bname, .ops = &pxa_ep_ops, .maxpacket = maxpkt, \ 235 .caps = USB_EP_CAPS(ctype, cdir), }, \ 236 .desc = { .bEndpointAddress = addr | (dir ? USB_DIR_IN : 0), \ 237 .bmAttributes = USB_ENDPOINT_XFER_ ## type, \ 238 .wMaxPacketSize = maxpkt, }, \ 239 .dev = &memory \ 240 } 241 #define USB_EP_BULK(addr, bname, dir, cdir) \ 242 USB_EP_DEF(addr, bname, dir, BULK, BULK_FIFO_SIZE, \ 243 USB_EP_CAPS_TYPE_BULK, cdir) 244 #define USB_EP_ISO(addr, bname, dir, cdir) \ 245 USB_EP_DEF(addr, bname, dir, ISOC, ISO_FIFO_SIZE, \ 246 USB_EP_CAPS_TYPE_ISO, cdir) 247 #define USB_EP_INT(addr, bname, dir, cdir) \ 248 USB_EP_DEF(addr, bname, dir, INT, INT_FIFO_SIZE, \ 249 USB_EP_CAPS_TYPE_INT, cdir) 250 #define USB_EP_IN_BULK(n) USB_EP_BULK(n, "ep" #n "in-bulk", 1, \ 251 USB_EP_CAPS_DIR_IN) 252 #define USB_EP_OUT_BULK(n) USB_EP_BULK(n, "ep" #n "out-bulk", 0, \ 253 USB_EP_CAPS_DIR_OUT) 254 #define USB_EP_IN_ISO(n) USB_EP_ISO(n, "ep" #n "in-iso", 1, \ 255 USB_EP_CAPS_DIR_IN) 256 #define USB_EP_OUT_ISO(n) USB_EP_ISO(n, "ep" #n "out-iso", 0, \ 257 USB_EP_CAPS_DIR_OUT) 258 #define USB_EP_IN_INT(n) USB_EP_INT(n, "ep" #n "in-int", 1, \ 259 USB_EP_CAPS_DIR_IN) 260 #define USB_EP_CTRL USB_EP_DEF(0, "ep0", 0, CONTROL, EP0_FIFO_SIZE, \ 261 USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL) 262 263 #define PXA_EP_DEF(_idx, _addr, dir, _type, maxpkt, _config, iface, altset) \ 264 { \ 265 .dev = &memory, \ 266 .name = "ep" #_idx, \ 267 .idx = _idx, .enabled = 0, \ 268 .dir_in = dir, .addr = _addr, \ 269 .config = _config, .interface = iface, .alternate = altset, \ 270 .type = _type, .fifo_size = maxpkt, \ 271 } 272 #define PXA_EP_BULK(_idx, addr, dir, config, iface, alt) \ 273 PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE, \ 274 config, iface, alt) 275 #define PXA_EP_ISO(_idx, addr, dir, config, iface, alt) \ 276 PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE, \ 277 config, iface, alt) 278 #define PXA_EP_INT(_idx, addr, dir, config, iface, alt) \ 279 PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE, \ 280 config, iface, alt) 281 #define PXA_EP_IN_BULK(i, adr, c, f, a) PXA_EP_BULK(i, adr, 1, c, f, a) 282 #define PXA_EP_OUT_BULK(i, adr, c, f, a) PXA_EP_BULK(i, adr, 0, c, f, a) 283 #define PXA_EP_IN_ISO(i, adr, c, f, a) PXA_EP_ISO(i, adr, 1, c, f, a) 284 #define PXA_EP_OUT_ISO(i, adr, c, f, a) PXA_EP_ISO(i, adr, 0, c, f, a) 285 #define PXA_EP_IN_INT(i, adr, c, f, a) PXA_EP_INT(i, adr, 1, c, f, a) 286 #define PXA_EP_CTRL PXA_EP_DEF(0, 0, 0, 0, EP0_FIFO_SIZE, 0, 0, 0) 287 288 struct pxa27x_udc; 289 290 struct stats { 291 unsigned long in_ops; 292 unsigned long out_ops; 293 unsigned long in_bytes; 294 unsigned long out_bytes; 295 unsigned long irqs; 296 }; 297 298 /** 299 * struct udc_usb_ep - container of each usb_ep structure 300 * @usb_ep: usb endpoint 301 * @desc: usb descriptor, especially type and address 302 * @dev: udc managing this endpoint 303 * @pxa_ep: matching pxa_ep (cache of find_pxa_ep() call) 304 */ 305 struct udc_usb_ep { 306 struct usb_ep usb_ep; 307 struct usb_endpoint_descriptor desc; 308 struct pxa_udc *dev; 309 struct pxa_ep *pxa_ep; 310 }; 311 312 /** 313 * struct pxa_ep - pxa endpoint 314 * @dev: udc device 315 * @queue: requests queue 316 * @lock: lock to pxa_ep data (queues and stats) 317 * @enabled: true when endpoint enabled (not stopped by gadget layer) 318 * @in_handle_ep: number of recursions of handle_ep() function 319 * Prevents deadlocks or infinite recursions of types : 320 * irq->handle_ep()->req_done()->req.complete()->pxa_ep_queue()->handle_ep() 321 * or 322 * pxa_ep_queue()->handle_ep()->req_done()->req.complete()->pxa_ep_queue() 323 * @idx: endpoint index (1 => epA, 2 => epB, ..., 24 => epX) 324 * @name: endpoint name (for trace/debug purpose) 325 * @dir_in: 1 if IN endpoint, 0 if OUT endpoint 326 * @addr: usb endpoint number 327 * @config: configuration in which this endpoint is active 328 * @interface: interface in which this endpoint is active 329 * @alternate: altsetting in which this endpoitn is active 330 * @fifo_size: max packet size in the endpoint fifo 331 * @type: endpoint type (bulk, iso, int, ...) 332 * @udccsr_value: save register of UDCCSR0 for suspend/resume 333 * @udccr_value: save register of UDCCR for suspend/resume 334 * @stats: endpoint statistics 335 * 336 * The *PROBLEM* is that pxa's endpoint configuration scheme is both misdesigned 337 * (cares about config/interface/altsetting, thus placing needless limits on 338 * device capability) and full of implementation bugs forcing it to be set up 339 * for use more or less like a pxa255. 340 * 341 * As we define the pxa_ep statically, we must guess all needed pxa_ep for all 342 * gadget which may work with this udc driver. 343 */ 344 struct pxa_ep { 345 struct pxa_udc *dev; 346 347 struct list_head queue; 348 spinlock_t lock; /* Protects this structure */ 349 /* (queues, stats) */ 350 unsigned enabled:1; 351 unsigned in_handle_ep:1; 352 353 unsigned idx:5; 354 char *name; 355 356 /* 357 * Specific pxa endpoint data, needed for hardware initialization 358 */ 359 unsigned dir_in:1; 360 unsigned addr:4; 361 unsigned config:2; 362 unsigned interface:3; 363 unsigned alternate:3; 364 unsigned fifo_size; 365 unsigned type; 366 367 #ifdef CONFIG_PM 368 u32 udccsr_value; 369 u32 udccr_value; 370 #endif 371 struct stats stats; 372 }; 373 374 /** 375 * struct pxa27x_request - container of each usb_request structure 376 * @req: usb request 377 * @udc_usb_ep: usb endpoint the request was submitted on 378 * @in_use: sanity check if request already queued on an pxa_ep 379 * @queue: linked list of requests, linked on pxa_ep->queue 380 */ 381 struct pxa27x_request { 382 struct usb_request req; 383 struct udc_usb_ep *udc_usb_ep; 384 unsigned in_use:1; 385 struct list_head queue; 386 }; 387 388 enum ep0_state { 389 WAIT_FOR_SETUP, 390 SETUP_STAGE, 391 IN_DATA_STAGE, 392 OUT_DATA_STAGE, 393 IN_STATUS_STAGE, 394 OUT_STATUS_STAGE, 395 STALL, 396 WAIT_ACK_SET_CONF_INTERF 397 }; 398 399 static char *ep0_state_name[] = { 400 "WAIT_FOR_SETUP", "SETUP_STAGE", "IN_DATA_STAGE", "OUT_DATA_STAGE", 401 "IN_STATUS_STAGE", "OUT_STATUS_STAGE", "STALL", 402 "WAIT_ACK_SET_CONF_INTERF" 403 }; 404 #define EP0_STNAME(udc) ep0_state_name[(udc)->ep0state] 405 406 #define EP0_FIFO_SIZE 16U 407 #define BULK_FIFO_SIZE 64U 408 #define ISO_FIFO_SIZE 256U 409 #define INT_FIFO_SIZE 16U 410 411 struct udc_stats { 412 unsigned long irqs_reset; 413 unsigned long irqs_suspend; 414 unsigned long irqs_resume; 415 unsigned long irqs_reconfig; 416 }; 417 418 #define NR_USB_ENDPOINTS (1 + 5) /* ep0 + ep1in-bulk + .. + ep3in-iso */ 419 #define NR_PXA_ENDPOINTS (1 + 14) /* ep0 + epA + epB + .. + epX */ 420 421 /** 422 * struct pxa_udc - udc structure 423 * @regs: mapped IO space 424 * @irq: udc irq 425 * @clk: udc clock 426 * @usb_gadget: udc gadget structure 427 * @driver: bound gadget (zero, g_ether, g_mass_storage, ...) 428 * @dev: device 429 * @udc_command: machine specific function to activate D+ pullup 430 * @gpiod: gpio descriptor of gpio for D+ pullup (or NULL if none) 431 * @transceiver: external transceiver to handle vbus sense and D+ pullup 432 * @ep0state: control endpoint state machine state 433 * @stats: statistics on udc usage 434 * @udc_usb_ep: array of usb endpoints offered by the gadget 435 * @pxa_ep: array of pxa available endpoints 436 * @enabled: UDC was enabled by a previous udc_enable() 437 * @pullup_on: if pullup resistor connected to D+ pin 438 * @pullup_resume: if pullup resistor should be connected to D+ pin on resume 439 * @config: UDC active configuration 440 * @last_interface: UDC interface of the last SET_INTERFACE host request 441 * @last_alternate: UDC altsetting of the last SET_INTERFACE host request 442 * @udccsr0: save of udccsr0 in case of suspend 443 * @debugfs_state: debugfs entry for "udcstate" 444 * @debugfs_queues: debugfs entry for "queues" 445 * @debugfs_eps: debugfs entry for "epstate" 446 */ 447 struct pxa_udc { 448 void __iomem *regs; 449 int irq; 450 struct clk *clk; 451 452 struct usb_gadget gadget; 453 struct usb_gadget_driver *driver; 454 struct device *dev; 455 void (*udc_command)(int); 456 struct gpio_desc *gpiod; 457 struct usb_phy *transceiver; 458 459 enum ep0_state ep0state; 460 struct udc_stats stats; 461 462 struct udc_usb_ep udc_usb_ep[NR_USB_ENDPOINTS]; 463 struct pxa_ep pxa_ep[NR_PXA_ENDPOINTS]; 464 465 unsigned enabled:1; 466 unsigned pullup_on:1; 467 unsigned pullup_resume:1; 468 unsigned vbus_sensed:1; 469 unsigned config:2; 470 unsigned last_interface:3; 471 unsigned last_alternate:3; 472 473 #ifdef CONFIG_PM 474 unsigned udccsr0; 475 #endif 476 }; 477 #define to_pxa(g) (container_of((g), struct pxa_udc, gadget)) 478 479 static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget) 480 { 481 return container_of(gadget, struct pxa_udc, gadget); 482 } 483 484 /* 485 * Debugging/message support 486 */ 487 #define ep_dbg(ep, fmt, arg...) \ 488 dev_dbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg) 489 #define ep_vdbg(ep, fmt, arg...) \ 490 dev_vdbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg) 491 #define ep_err(ep, fmt, arg...) \ 492 dev_err(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg) 493 #define ep_info(ep, fmt, arg...) \ 494 dev_info(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg) 495 #define ep_warn(ep, fmt, arg...) \ 496 dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg) 497 498 #endif /* __LINUX_USB_GADGET_PXA27X_H */ 499