1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * NetChip 2280 high/full speed USB device controller. 4 * Unlike many such controllers, this one talks PCI. 5 */ 6 7 /* 8 * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) 9 * Copyright (C) 2003 David Brownell 10 * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS 11 */ 12 13 #include <linux/usb/net2280.h> 14 #include <linux/usb/usb338x.h> 15 16 /*-------------------------------------------------------------------------*/ 17 18 #ifdef __KERNEL__ 19 20 /* indexed registers [11.10] are accessed indirectly 21 * caller must own the device lock. 22 */ 23 24 static inline u32 get_idx_reg(struct net2280_regs __iomem *regs, u32 index) 25 { 26 writel(index, ®s->idxaddr); 27 /* NOTE: synchs device/cpu memory views */ 28 return readl(®s->idxdata); 29 } 30 31 static inline void 32 set_idx_reg(struct net2280_regs __iomem *regs, u32 index, u32 value) 33 { 34 writel(index, ®s->idxaddr); 35 writel(value, ®s->idxdata); 36 /* posted, may not be visible yet */ 37 } 38 39 #endif /* __KERNEL__ */ 40 41 #define PCI_VENDOR_ID_PLX_LEGACY 0x17cc 42 43 #define PLX_LEGACY BIT(0) 44 #define PLX_2280 BIT(1) 45 #define PLX_SUPERSPEED BIT(2) 46 #define PLX_PCIE BIT(3) 47 48 #define REG_DIAG 0x0 49 #define RETRY_COUNTER 16 50 #define FORCE_PCI_SERR 11 51 #define FORCE_PCI_INTERRUPT 10 52 #define FORCE_USB_INTERRUPT 9 53 #define FORCE_CPU_INTERRUPT 8 54 #define ILLEGAL_BYTE_ENABLES 5 55 #define FAST_TIMES 4 56 #define FORCE_RECEIVE_ERROR 2 57 #define FORCE_TRANSMIT_CRC_ERROR 0 58 #define REG_FRAME 0x02 /* from last sof */ 59 #define REG_CHIPREV 0x03 /* in bcd */ 60 #define REG_HS_NAK_RATE 0x0a /* NAK per N uframes */ 61 62 #define CHIPREV_1 0x0100 63 #define CHIPREV_1A 0x0110 64 65 /* DEFECT 7374 */ 66 #define DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS 200 67 #define DEFECT_7374_PROCESSOR_WAIT_TIME 10 68 69 /* ep0 max packet size */ 70 #define EP0_SS_MAX_PACKET_SIZE 0x200 71 #define EP0_HS_MAX_PACKET_SIZE 0x40 72 #ifdef __KERNEL__ 73 74 /*-------------------------------------------------------------------------*/ 75 76 /* [8.3] for scatter/gather i/o 77 * use struct net2280_dma_regs bitfields 78 */ 79 struct net2280_dma { 80 __le32 dmacount; 81 __le32 dmaaddr; /* the buffer */ 82 __le32 dmadesc; /* next dma descriptor */ 83 __le32 _reserved; 84 } __aligned(16); 85 86 /*-------------------------------------------------------------------------*/ 87 88 /* DRIVER DATA STRUCTURES and UTILITIES */ 89 90 struct net2280_ep { 91 struct usb_ep ep; 92 struct net2280_ep_regs __iomem *cfg; 93 struct net2280_ep_regs __iomem *regs; 94 struct net2280_dma_regs __iomem *dma; 95 struct net2280_dma *dummy; 96 dma_addr_t td_dma; /* of dummy */ 97 struct net2280 *dev; 98 unsigned long irqs; 99 100 /* analogous to a host-side qh */ 101 struct list_head queue; 102 const struct usb_endpoint_descriptor *desc; 103 unsigned num : 8, 104 fifo_size : 12, 105 in_fifo_validate : 1, 106 out_overflow : 1, 107 stopped : 1, 108 wedged : 1, 109 is_in : 1, 110 is_iso : 1, 111 responded : 1; 112 }; 113 114 static inline void allow_status(struct net2280_ep *ep) 115 { 116 /* ep0 only */ 117 writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) | 118 BIT(CLEAR_NAK_OUT_PACKETS) | 119 BIT(CLEAR_NAK_OUT_PACKETS_MODE), 120 &ep->regs->ep_rsp); 121 ep->stopped = 1; 122 } 123 124 static inline void allow_status_338x(struct net2280_ep *ep) 125 { 126 /* 127 * Control Status Phase Handshake was set by the chip when the setup 128 * packet arrived. While set, the chip automatically NAKs the host's 129 * Status Phase tokens. 130 */ 131 writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE), &ep->regs->ep_rsp); 132 133 ep->stopped = 1; 134 135 /* TD 9.9 Halt Endpoint test. TD 9.22 set feature test. */ 136 ep->responded = 0; 137 } 138 139 struct net2280_request { 140 struct usb_request req; 141 struct net2280_dma *td; 142 dma_addr_t td_dma; 143 struct list_head queue; 144 unsigned mapped : 1, 145 valid : 1; 146 }; 147 148 struct net2280 { 149 /* each pci device provides one gadget, several endpoints */ 150 struct usb_gadget gadget; 151 spinlock_t lock; 152 struct net2280_ep ep[9]; 153 struct usb_gadget_driver *driver; 154 unsigned enabled : 1, 155 protocol_stall : 1, 156 softconnect : 1, 157 got_irq : 1, 158 region:1, 159 u1_enable:1, 160 u2_enable:1, 161 ltm_enable:1, 162 wakeup_enable:1, 163 addressed_state:1, 164 bug7734_patched:1; 165 u16 chiprev; 166 int enhanced_mode; 167 int n_ep; 168 kernel_ulong_t quirks; 169 170 171 /* pci state used to access those endpoints */ 172 struct pci_dev *pdev; 173 struct net2280_regs __iomem *regs; 174 struct net2280_usb_regs __iomem *usb; 175 struct usb338x_usb_ext_regs __iomem *usb_ext; 176 struct net2280_pci_regs __iomem *pci; 177 struct net2280_dma_regs __iomem *dma; 178 struct net2280_dep_regs __iomem *dep; 179 struct net2280_ep_regs __iomem *epregs; 180 struct usb338x_ll_regs __iomem *llregs; 181 struct usb338x_ll_lfps_regs __iomem *ll_lfps_regs; 182 struct usb338x_ll_tsn_regs __iomem *ll_tsn_regs; 183 struct usb338x_ll_chi_regs __iomem *ll_chicken_reg; 184 struct usb338x_pl_regs __iomem *plregs; 185 186 struct dma_pool *requests; 187 /* statistics...*/ 188 }; 189 190 static inline void set_halt(struct net2280_ep *ep) 191 { 192 /* ep0 and bulk/intr endpoints */ 193 writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) | 194 /* set NAK_OUT for erratum 0114 */ 195 ((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS) | 196 BIT(SET_ENDPOINT_HALT), 197 &ep->regs->ep_rsp); 198 } 199 200 static inline void clear_halt(struct net2280_ep *ep) 201 { 202 /* ep0 and bulk/intr endpoints */ 203 writel(BIT(CLEAR_ENDPOINT_HALT) | 204 BIT(CLEAR_ENDPOINT_TOGGLE) | 205 /* 206 * unless the gadget driver left a short packet in the 207 * fifo, this reverses the erratum 0114 workaround. 208 */ 209 ((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS), 210 &ep->regs->ep_rsp); 211 } 212 213 /* 214 * FSM value for Defect 7374 (U1U2 Test) is managed in 215 * chip's SCRATCH register: 216 */ 217 #define DEFECT7374_FSM_FIELD 28 218 219 /* Waiting for Control Read: 220 * - A transition to this state indicates a fresh USB connection, 221 * before the first Setup Packet. The connection speed is not 222 * known. Firmware is waiting for the first Control Read. 223 * - Starting state: This state can be thought of as the FSM's typical 224 * starting state. 225 * - Tip: Upon the first SS Control Read the FSM never 226 * returns to this state. 227 */ 228 #define DEFECT7374_FSM_WAITING_FOR_CONTROL_READ BIT(DEFECT7374_FSM_FIELD) 229 230 /* Non-SS Control Read: 231 * - A transition to this state indicates detection of the first HS 232 * or FS Control Read. 233 * - Tip: Upon the first SS Control Read the FSM never 234 * returns to this state. 235 */ 236 #define DEFECT7374_FSM_NON_SS_CONTROL_READ (2 << DEFECT7374_FSM_FIELD) 237 238 /* SS Control Read: 239 * - A transition to this state indicates detection of the 240 * first SS Control Read. 241 * - This state indicates workaround completion. Workarounds no longer 242 * need to be applied (as long as the chip remains powered up). 243 * - Tip: Once in this state the FSM state does not change (until 244 * the chip's power is lost and restored). 245 * - This can be thought of as the final state of the FSM; 246 * the FSM 'locks-up' in this state until the chip loses power. 247 */ 248 #define DEFECT7374_FSM_SS_CONTROL_READ (3 << DEFECT7374_FSM_FIELD) 249 250 #ifdef USE_RDK_LEDS 251 252 static inline void net2280_led_init(struct net2280 *dev) 253 { 254 /* LED3 (green) is on during USB activity. note erratum 0113. */ 255 writel(BIT(GPIO3_LED_SELECT) | 256 BIT(GPIO3_OUTPUT_ENABLE) | 257 BIT(GPIO2_OUTPUT_ENABLE) | 258 BIT(GPIO1_OUTPUT_ENABLE) | 259 BIT(GPIO0_OUTPUT_ENABLE), 260 &dev->regs->gpioctl); 261 } 262 263 /* indicate speed with bi-color LED 0/1 */ 264 static inline 265 void net2280_led_speed(struct net2280 *dev, enum usb_device_speed speed) 266 { 267 u32 val = readl(&dev->regs->gpioctl); 268 switch (speed) { 269 case USB_SPEED_SUPER: /* green + red */ 270 val |= BIT(GPIO0_DATA) | BIT(GPIO1_DATA); 271 break; 272 case USB_SPEED_HIGH: /* green */ 273 val &= ~BIT(GPIO0_DATA); 274 val |= BIT(GPIO1_DATA); 275 break; 276 case USB_SPEED_FULL: /* red */ 277 val &= ~BIT(GPIO1_DATA); 278 val |= BIT(GPIO0_DATA); 279 break; 280 default: /* (off/black) */ 281 val &= ~(BIT(GPIO1_DATA) | BIT(GPIO0_DATA)); 282 break; 283 } 284 writel(val, &dev->regs->gpioctl); 285 } 286 287 /* indicate power with LED 2 */ 288 static inline void net2280_led_active(struct net2280 *dev, int is_active) 289 { 290 u32 val = readl(&dev->regs->gpioctl); 291 292 /* FIXME this LED never seems to turn on.*/ 293 if (is_active) 294 val |= GPIO2_DATA; 295 else 296 val &= ~GPIO2_DATA; 297 writel(val, &dev->regs->gpioctl); 298 } 299 300 static inline void net2280_led_shutdown(struct net2280 *dev) 301 { 302 /* turn off all four GPIO*_DATA bits */ 303 writel(readl(&dev->regs->gpioctl) & ~0x0f, 304 &dev->regs->gpioctl); 305 } 306 307 #else 308 309 #define net2280_led_init(dev) do { } while (0) 310 #define net2280_led_speed(dev, speed) do { } while (0) 311 #define net2280_led_shutdown(dev) do { } while (0) 312 313 #endif 314 315 /*-------------------------------------------------------------------------*/ 316 317 #define ep_dbg(ndev, fmt, args...) \ 318 dev_dbg((&((ndev)->pdev->dev)), fmt, ##args) 319 320 #define ep_vdbg(ndev, fmt, args...) \ 321 dev_vdbg((&((ndev)->pdev->dev)), fmt, ##args) 322 323 #define ep_info(ndev, fmt, args...) \ 324 dev_info((&((ndev)->pdev->dev)), fmt, ##args) 325 326 #define ep_warn(ndev, fmt, args...) \ 327 dev_warn((&((ndev)->pdev->dev)), fmt, ##args) 328 329 #define ep_err(ndev, fmt, args...) \ 330 dev_err((&((ndev)->pdev->dev)), fmt, ##args) 331 332 /*-------------------------------------------------------------------------*/ 333 334 static inline void set_fifo_bytecount(struct net2280_ep *ep, unsigned count) 335 { 336 if (ep->dev->pdev->vendor == 0x17cc) 337 writeb(count, 2 + (u8 __iomem *) &ep->regs->ep_cfg); 338 else{ 339 u32 tmp = readl(&ep->cfg->ep_cfg) & 340 (~(0x07 << EP_FIFO_BYTE_COUNT)); 341 writel(tmp | (count << EP_FIFO_BYTE_COUNT), &ep->cfg->ep_cfg); 342 } 343 } 344 345 static inline void start_out_naking(struct net2280_ep *ep) 346 { 347 /* NOTE: hardware races lurk here, and PING protocol issues */ 348 writel(BIT(SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); 349 /* synch with device */ 350 readl(&ep->regs->ep_rsp); 351 } 352 353 static inline void stop_out_naking(struct net2280_ep *ep) 354 { 355 u32 tmp; 356 357 tmp = readl(&ep->regs->ep_stat); 358 if ((tmp & BIT(NAK_OUT_PACKETS)) != 0) 359 writel(BIT(CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp); 360 } 361 362 363 static inline void set_max_speed(struct net2280_ep *ep, u32 max) 364 { 365 u32 reg; 366 static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80, 367 0x50, 0x20, 0x70, 0x40, 0x90 }; 368 369 if (ep->dev->enhanced_mode) { 370 reg = ep_enhanced[ep->num]; 371 switch (ep->dev->gadget.speed) { 372 case USB_SPEED_SUPER: 373 reg += 2; 374 break; 375 case USB_SPEED_FULL: 376 reg += 1; 377 break; 378 case USB_SPEED_HIGH: 379 default: 380 break; 381 } 382 } else { 383 reg = (ep->num + 1) * 0x10; 384 if (ep->dev->gadget.speed != USB_SPEED_HIGH) 385 reg += 1; 386 } 387 388 set_idx_reg(ep->dev->regs, reg, max); 389 } 390 391 #endif /* __KERNEL__ */ 392