1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Driver for PLX NET2272 USB device controller 4 * 5 * Copyright (C) 2005-2006 PLX Technology, Inc. 6 * Copyright (C) 2006-2011 Analog Devices, Inc. 7 */ 8 9 #include <linux/delay.h> 10 #include <linux/device.h> 11 #include <linux/errno.h> 12 #include <linux/init.h> 13 #include <linux/interrupt.h> 14 #include <linux/io.h> 15 #include <linux/ioport.h> 16 #include <linux/kernel.h> 17 #include <linux/list.h> 18 #include <linux/module.h> 19 #include <linux/moduleparam.h> 20 #include <linux/pci.h> 21 #include <linux/platform_device.h> 22 #include <linux/prefetch.h> 23 #include <linux/sched.h> 24 #include <linux/slab.h> 25 #include <linux/timer.h> 26 #include <linux/usb.h> 27 #include <linux/usb/ch9.h> 28 #include <linux/usb/gadget.h> 29 30 #include <asm/byteorder.h> 31 #include <asm/unaligned.h> 32 33 #include "net2272.h" 34 35 #define DRIVER_DESC "PLX NET2272 USB Peripheral Controller" 36 37 static const char driver_name[] = "net2272"; 38 static const char driver_vers[] = "2006 October 17/mainline"; 39 static const char driver_desc[] = DRIVER_DESC; 40 41 static const char ep0name[] = "ep0"; 42 static const char * const ep_name[] = { 43 ep0name, 44 "ep-a", "ep-b", "ep-c", 45 }; 46 47 #ifdef CONFIG_USB_NET2272_DMA 48 /* 49 * use_dma: the NET2272 can use an external DMA controller. 50 * Note that since there is no generic DMA api, some functions, 51 * notably request_dma, start_dma, and cancel_dma will need to be 52 * modified for your platform's particular dma controller. 53 * 54 * If use_dma is disabled, pio will be used instead. 55 */ 56 static bool use_dma = false; 57 module_param(use_dma, bool, 0644); 58 59 /* 60 * dma_ep: selects the endpoint for use with dma (1=ep-a, 2=ep-b) 61 * The NET2272 can only use dma for a single endpoint at a time. 62 * At some point this could be modified to allow either endpoint 63 * to take control of dma as it becomes available. 64 * 65 * Note that DMA should not be used on OUT endpoints unless it can 66 * be guaranteed that no short packets will arrive on an IN endpoint 67 * while the DMA operation is pending. Otherwise the OUT DMA will 68 * terminate prematurely (See NET2272 Errata 630-0213-0101) 69 */ 70 static ushort dma_ep = 1; 71 module_param(dma_ep, ushort, 0644); 72 73 /* 74 * dma_mode: net2272 dma mode setting (see LOCCTL1 definition): 75 * mode 0 == Slow DREQ mode 76 * mode 1 == Fast DREQ mode 77 * mode 2 == Burst mode 78 */ 79 static ushort dma_mode = 2; 80 module_param(dma_mode, ushort, 0644); 81 #else 82 #define use_dma 0 83 #define dma_ep 1 84 #define dma_mode 2 85 #endif 86 87 /* 88 * fifo_mode: net2272 buffer configuration: 89 * mode 0 == ep-{a,b,c} 512db each 90 * mode 1 == ep-a 1k, ep-{b,c} 512db 91 * mode 2 == ep-a 1k, ep-b 1k, ep-c 512db 92 * mode 3 == ep-a 1k, ep-b disabled, ep-c 512db 93 */ 94 static ushort fifo_mode; 95 module_param(fifo_mode, ushort, 0644); 96 97 /* 98 * enable_suspend: When enabled, the driver will respond to 99 * USB suspend requests by powering down the NET2272. Otherwise, 100 * USB suspend requests will be ignored. This is acceptable for 101 * self-powered devices. For bus powered devices set this to 1. 102 */ 103 static ushort enable_suspend; 104 module_param(enable_suspend, ushort, 0644); 105 106 static void assert_out_naking(struct net2272_ep *ep, const char *where) 107 { 108 u8 tmp; 109 110 #ifndef DEBUG 111 return; 112 #endif 113 114 tmp = net2272_ep_read(ep, EP_STAT0); 115 if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) { 116 dev_dbg(ep->dev->dev, "%s %s %02x !NAK\n", 117 ep->ep.name, where, tmp); 118 net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS); 119 } 120 } 121 #define ASSERT_OUT_NAKING(ep) assert_out_naking(ep, __func__) 122 123 static void stop_out_naking(struct net2272_ep *ep) 124 { 125 u8 tmp = net2272_ep_read(ep, EP_STAT0); 126 127 if ((tmp & (1 << NAK_OUT_PACKETS)) != 0) 128 net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS); 129 } 130 131 #define PIPEDIR(bAddress) (usb_pipein(bAddress) ? "in" : "out") 132 133 static char *type_string(u8 bmAttributes) 134 { 135 switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) { 136 case USB_ENDPOINT_XFER_BULK: return "bulk"; 137 case USB_ENDPOINT_XFER_ISOC: return "iso"; 138 case USB_ENDPOINT_XFER_INT: return "intr"; 139 default: return "control"; 140 } 141 } 142 143 static char *buf_state_string(unsigned state) 144 { 145 switch (state) { 146 case BUFF_FREE: return "free"; 147 case BUFF_VALID: return "valid"; 148 case BUFF_LCL: return "local"; 149 case BUFF_USB: return "usb"; 150 default: return "unknown"; 151 } 152 } 153 154 static char *dma_mode_string(void) 155 { 156 if (!use_dma) 157 return "PIO"; 158 switch (dma_mode) { 159 case 0: return "SLOW DREQ"; 160 case 1: return "FAST DREQ"; 161 case 2: return "BURST"; 162 default: return "invalid"; 163 } 164 } 165 166 static void net2272_dequeue_all(struct net2272_ep *); 167 static int net2272_kick_dma(struct net2272_ep *, struct net2272_request *); 168 static int net2272_fifo_status(struct usb_ep *); 169 170 static const struct usb_ep_ops net2272_ep_ops; 171 172 /*---------------------------------------------------------------------------*/ 173 174 static int 175 net2272_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) 176 { 177 struct net2272 *dev; 178 struct net2272_ep *ep; 179 u32 max; 180 u8 tmp; 181 unsigned long flags; 182 183 ep = container_of(_ep, struct net2272_ep, ep); 184 if (!_ep || !desc || ep->desc || _ep->name == ep0name 185 || desc->bDescriptorType != USB_DT_ENDPOINT) 186 return -EINVAL; 187 dev = ep->dev; 188 if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) 189 return -ESHUTDOWN; 190 191 max = usb_endpoint_maxp(desc); 192 193 spin_lock_irqsave(&dev->lock, flags); 194 _ep->maxpacket = max; 195 ep->desc = desc; 196 197 /* net2272_ep_reset() has already been called */ 198 ep->stopped = 0; 199 ep->wedged = 0; 200 201 /* set speed-dependent max packet */ 202 net2272_ep_write(ep, EP_MAXPKT0, max & 0xff); 203 net2272_ep_write(ep, EP_MAXPKT1, (max & 0xff00) >> 8); 204 205 /* set type, direction, address; reset fifo counters */ 206 net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH); 207 tmp = usb_endpoint_type(desc); 208 if (usb_endpoint_xfer_bulk(desc)) { 209 /* catch some particularly blatant driver bugs */ 210 if ((dev->gadget.speed == USB_SPEED_HIGH && max != 512) || 211 (dev->gadget.speed == USB_SPEED_FULL && max > 64)) { 212 spin_unlock_irqrestore(&dev->lock, flags); 213 return -ERANGE; 214 } 215 } 216 ep->is_iso = usb_endpoint_xfer_isoc(desc) ? 1 : 0; 217 tmp <<= ENDPOINT_TYPE; 218 tmp |= ((desc->bEndpointAddress & 0x0f) << ENDPOINT_NUMBER); 219 tmp |= usb_endpoint_dir_in(desc) << ENDPOINT_DIRECTION; 220 tmp |= (1 << ENDPOINT_ENABLE); 221 222 /* for OUT transfers, block the rx fifo until a read is posted */ 223 ep->is_in = usb_endpoint_dir_in(desc); 224 if (!ep->is_in) 225 net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS); 226 227 net2272_ep_write(ep, EP_CFG, tmp); 228 229 /* enable irqs */ 230 tmp = (1 << ep->num) | net2272_read(dev, IRQENB0); 231 net2272_write(dev, IRQENB0, tmp); 232 233 tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) 234 | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE) 235 | net2272_ep_read(ep, EP_IRQENB); 236 net2272_ep_write(ep, EP_IRQENB, tmp); 237 238 tmp = desc->bEndpointAddress; 239 dev_dbg(dev->dev, "enabled %s (ep%d%s-%s) max %04x cfg %02x\n", 240 _ep->name, tmp & 0x0f, PIPEDIR(tmp), 241 type_string(desc->bmAttributes), max, 242 net2272_ep_read(ep, EP_CFG)); 243 244 spin_unlock_irqrestore(&dev->lock, flags); 245 return 0; 246 } 247 248 static void net2272_ep_reset(struct net2272_ep *ep) 249 { 250 u8 tmp; 251 252 ep->desc = NULL; 253 INIT_LIST_HEAD(&ep->queue); 254 255 usb_ep_set_maxpacket_limit(&ep->ep, ~0); 256 ep->ep.ops = &net2272_ep_ops; 257 258 /* disable irqs, endpoint */ 259 net2272_ep_write(ep, EP_IRQENB, 0); 260 261 /* init to our chosen defaults, notably so that we NAK OUT 262 * packets until the driver queues a read. 263 */ 264 tmp = (1 << NAK_OUT_PACKETS_MODE) | (1 << ALT_NAK_OUT_PACKETS); 265 net2272_ep_write(ep, EP_RSPSET, tmp); 266 267 tmp = (1 << INTERRUPT_MODE) | (1 << HIDE_STATUS_PHASE); 268 if (ep->num != 0) 269 tmp |= (1 << ENDPOINT_TOGGLE) | (1 << ENDPOINT_HALT); 270 271 net2272_ep_write(ep, EP_RSPCLR, tmp); 272 273 /* scrub most status bits, and flush any fifo state */ 274 net2272_ep_write(ep, EP_STAT0, 275 (1 << DATA_IN_TOKEN_INTERRUPT) 276 | (1 << DATA_OUT_TOKEN_INTERRUPT) 277 | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) 278 | (1 << DATA_PACKET_RECEIVED_INTERRUPT) 279 | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)); 280 281 net2272_ep_write(ep, EP_STAT1, 282 (1 << TIMEOUT) 283 | (1 << USB_OUT_ACK_SENT) 284 | (1 << USB_OUT_NAK_SENT) 285 | (1 << USB_IN_ACK_RCVD) 286 | (1 << USB_IN_NAK_SENT) 287 | (1 << USB_STALL_SENT) 288 | (1 << LOCAL_OUT_ZLP) 289 | (1 << BUFFER_FLUSH)); 290 291 /* fifo size is handled separately */ 292 } 293 294 static int net2272_disable(struct usb_ep *_ep) 295 { 296 struct net2272_ep *ep; 297 unsigned long flags; 298 299 ep = container_of(_ep, struct net2272_ep, ep); 300 if (!_ep || !ep->desc || _ep->name == ep0name) 301 return -EINVAL; 302 303 spin_lock_irqsave(&ep->dev->lock, flags); 304 net2272_dequeue_all(ep); 305 net2272_ep_reset(ep); 306 307 dev_vdbg(ep->dev->dev, "disabled %s\n", _ep->name); 308 309 spin_unlock_irqrestore(&ep->dev->lock, flags); 310 return 0; 311 } 312 313 /*---------------------------------------------------------------------------*/ 314 315 static struct usb_request * 316 net2272_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) 317 { 318 struct net2272_request *req; 319 320 if (!_ep) 321 return NULL; 322 323 req = kzalloc(sizeof(*req), gfp_flags); 324 if (!req) 325 return NULL; 326 327 INIT_LIST_HEAD(&req->queue); 328 329 return &req->req; 330 } 331 332 static void 333 net2272_free_request(struct usb_ep *_ep, struct usb_request *_req) 334 { 335 struct net2272_request *req; 336 337 if (!_ep || !_req) 338 return; 339 340 req = container_of(_req, struct net2272_request, req); 341 WARN_ON(!list_empty(&req->queue)); 342 kfree(req); 343 } 344 345 static void 346 net2272_done(struct net2272_ep *ep, struct net2272_request *req, int status) 347 { 348 struct net2272 *dev; 349 unsigned stopped = ep->stopped; 350 351 if (ep->num == 0) { 352 if (ep->dev->protocol_stall) { 353 ep->stopped = 1; 354 set_halt(ep); 355 } 356 allow_status(ep); 357 } 358 359 list_del_init(&req->queue); 360 361 if (req->req.status == -EINPROGRESS) 362 req->req.status = status; 363 else 364 status = req->req.status; 365 366 dev = ep->dev; 367 if (use_dma && ep->dma) 368 usb_gadget_unmap_request(&dev->gadget, &req->req, 369 ep->is_in); 370 371 if (status && status != -ESHUTDOWN) 372 dev_vdbg(dev->dev, "complete %s req %p stat %d len %u/%u buf %p\n", 373 ep->ep.name, &req->req, status, 374 req->req.actual, req->req.length, req->req.buf); 375 376 /* don't modify queue heads during completion callback */ 377 ep->stopped = 1; 378 spin_unlock(&dev->lock); 379 usb_gadget_giveback_request(&ep->ep, &req->req); 380 spin_lock(&dev->lock); 381 ep->stopped = stopped; 382 } 383 384 static int 385 net2272_write_packet(struct net2272_ep *ep, u8 *buf, 386 struct net2272_request *req, unsigned max) 387 { 388 u16 __iomem *ep_data = net2272_reg_addr(ep->dev, EP_DATA); 389 u16 *bufp; 390 unsigned length, count; 391 u8 tmp; 392 393 length = min(req->req.length - req->req.actual, max); 394 req->req.actual += length; 395 396 dev_vdbg(ep->dev->dev, "write packet %s req %p max %u len %u avail %u\n", 397 ep->ep.name, req, max, length, 398 (net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0)); 399 400 count = length; 401 bufp = (u16 *)buf; 402 403 while (likely(count >= 2)) { 404 /* no byte-swap required; chip endian set during init */ 405 writew(*bufp++, ep_data); 406 count -= 2; 407 } 408 buf = (u8 *)bufp; 409 410 /* write final byte by placing the NET2272 into 8-bit mode */ 411 if (unlikely(count)) { 412 tmp = net2272_read(ep->dev, LOCCTL); 413 net2272_write(ep->dev, LOCCTL, tmp & ~(1 << DATA_WIDTH)); 414 writeb(*buf, ep_data); 415 net2272_write(ep->dev, LOCCTL, tmp); 416 } 417 return length; 418 } 419 420 /* returns: 0: still running, 1: completed, negative: errno */ 421 static int 422 net2272_write_fifo(struct net2272_ep *ep, struct net2272_request *req) 423 { 424 u8 *buf; 425 unsigned count, max; 426 int status; 427 428 dev_vdbg(ep->dev->dev, "write_fifo %s actual %d len %d\n", 429 ep->ep.name, req->req.actual, req->req.length); 430 431 /* 432 * Keep loading the endpoint until the final packet is loaded, 433 * or the endpoint buffer is full. 434 */ 435 top: 436 /* 437 * Clear interrupt status 438 * - Packet Transmitted interrupt will become set again when the 439 * host successfully takes another packet 440 */ 441 net2272_ep_write(ep, EP_STAT0, (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)); 442 while (!(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_FULL))) { 443 buf = req->req.buf + req->req.actual; 444 prefetch(buf); 445 446 /* force pagesel */ 447 net2272_ep_read(ep, EP_STAT0); 448 449 max = (net2272_ep_read(ep, EP_AVAIL1) << 8) | 450 (net2272_ep_read(ep, EP_AVAIL0)); 451 452 if (max < ep->ep.maxpacket) 453 max = (net2272_ep_read(ep, EP_AVAIL1) << 8) 454 | (net2272_ep_read(ep, EP_AVAIL0)); 455 456 count = net2272_write_packet(ep, buf, req, max); 457 /* see if we are done */ 458 if (req->req.length == req->req.actual) { 459 /* validate short or zlp packet */ 460 if (count < ep->ep.maxpacket) 461 set_fifo_bytecount(ep, 0); 462 net2272_done(ep, req, 0); 463 464 if (!list_empty(&ep->queue)) { 465 req = list_entry(ep->queue.next, 466 struct net2272_request, 467 queue); 468 status = net2272_kick_dma(ep, req); 469 470 if (status < 0) 471 if ((net2272_ep_read(ep, EP_STAT0) 472 & (1 << BUFFER_EMPTY))) 473 goto top; 474 } 475 return 1; 476 } 477 net2272_ep_write(ep, EP_STAT0, (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)); 478 } 479 return 0; 480 } 481 482 static void 483 net2272_out_flush(struct net2272_ep *ep) 484 { 485 ASSERT_OUT_NAKING(ep); 486 487 net2272_ep_write(ep, EP_STAT0, (1 << DATA_OUT_TOKEN_INTERRUPT) 488 | (1 << DATA_PACKET_RECEIVED_INTERRUPT)); 489 net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH); 490 } 491 492 static int 493 net2272_read_packet(struct net2272_ep *ep, u8 *buf, 494 struct net2272_request *req, unsigned avail) 495 { 496 u16 __iomem *ep_data = net2272_reg_addr(ep->dev, EP_DATA); 497 unsigned is_short; 498 u16 *bufp; 499 500 req->req.actual += avail; 501 502 dev_vdbg(ep->dev->dev, "read packet %s req %p len %u avail %u\n", 503 ep->ep.name, req, avail, 504 (net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0)); 505 506 is_short = (avail < ep->ep.maxpacket); 507 508 if (unlikely(avail == 0)) { 509 /* remove any zlp from the buffer */ 510 (void)readw(ep_data); 511 return is_short; 512 } 513 514 /* Ensure we get the final byte */ 515 if (unlikely(avail % 2)) 516 avail++; 517 bufp = (u16 *)buf; 518 519 do { 520 *bufp++ = readw(ep_data); 521 avail -= 2; 522 } while (avail); 523 524 /* 525 * To avoid false endpoint available race condition must read 526 * ep stat0 twice in the case of a short transfer 527 */ 528 if (net2272_ep_read(ep, EP_STAT0) & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) 529 net2272_ep_read(ep, EP_STAT0); 530 531 return is_short; 532 } 533 534 static int 535 net2272_read_fifo(struct net2272_ep *ep, struct net2272_request *req) 536 { 537 u8 *buf; 538 unsigned is_short; 539 int count; 540 int tmp; 541 int cleanup = 0; 542 543 dev_vdbg(ep->dev->dev, "read_fifo %s actual %d len %d\n", 544 ep->ep.name, req->req.actual, req->req.length); 545 546 top: 547 do { 548 buf = req->req.buf + req->req.actual; 549 prefetchw(buf); 550 551 count = (net2272_ep_read(ep, EP_AVAIL1) << 8) 552 | net2272_ep_read(ep, EP_AVAIL0); 553 554 net2272_ep_write(ep, EP_STAT0, 555 (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) | 556 (1 << DATA_PACKET_RECEIVED_INTERRUPT)); 557 558 tmp = req->req.length - req->req.actual; 559 560 if (count > tmp) { 561 if ((tmp % ep->ep.maxpacket) != 0) { 562 dev_err(ep->dev->dev, 563 "%s out fifo %d bytes, expected %d\n", 564 ep->ep.name, count, tmp); 565 cleanup = 1; 566 } 567 count = (tmp > 0) ? tmp : 0; 568 } 569 570 is_short = net2272_read_packet(ep, buf, req, count); 571 572 /* completion */ 573 if (unlikely(cleanup || is_short || 574 req->req.actual == req->req.length)) { 575 576 if (cleanup) { 577 net2272_out_flush(ep); 578 net2272_done(ep, req, -EOVERFLOW); 579 } else 580 net2272_done(ep, req, 0); 581 582 /* re-initialize endpoint transfer registers 583 * otherwise they may result in erroneous pre-validation 584 * for subsequent control reads 585 */ 586 if (unlikely(ep->num == 0)) { 587 net2272_ep_write(ep, EP_TRANSFER2, 0); 588 net2272_ep_write(ep, EP_TRANSFER1, 0); 589 net2272_ep_write(ep, EP_TRANSFER0, 0); 590 } 591 592 if (!list_empty(&ep->queue)) { 593 int status; 594 595 req = list_entry(ep->queue.next, 596 struct net2272_request, queue); 597 status = net2272_kick_dma(ep, req); 598 if ((status < 0) && 599 !(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_EMPTY))) 600 goto top; 601 } 602 return 1; 603 } 604 } while (!(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_EMPTY))); 605 606 return 0; 607 } 608 609 static void 610 net2272_pio_advance(struct net2272_ep *ep) 611 { 612 struct net2272_request *req; 613 614 if (unlikely(list_empty(&ep->queue))) 615 return; 616 617 req = list_entry(ep->queue.next, struct net2272_request, queue); 618 (ep->is_in ? net2272_write_fifo : net2272_read_fifo)(ep, req); 619 } 620 621 /* returns 0 on success, else negative errno */ 622 static int 623 net2272_request_dma(struct net2272 *dev, unsigned ep, u32 buf, 624 unsigned len, unsigned dir) 625 { 626 dev_vdbg(dev->dev, "request_dma ep %d buf %08x len %d dir %d\n", 627 ep, buf, len, dir); 628 629 /* The NET2272 only supports a single dma channel */ 630 if (dev->dma_busy) 631 return -EBUSY; 632 /* 633 * EP_TRANSFER (used to determine the number of bytes received 634 * in an OUT transfer) is 24 bits wide; don't ask for more than that. 635 */ 636 if ((dir == 1) && (len > 0x1000000)) 637 return -EINVAL; 638 639 dev->dma_busy = 1; 640 641 /* initialize platform's dma */ 642 #ifdef CONFIG_USB_PCI 643 /* NET2272 addr, buffer addr, length, etc. */ 644 switch (dev->dev_id) { 645 case PCI_DEVICE_ID_RDK1: 646 /* Setup PLX 9054 DMA mode */ 647 writel((1 << LOCAL_BUS_WIDTH) | 648 (1 << TA_READY_INPUT_ENABLE) | 649 (0 << LOCAL_BURST_ENABLE) | 650 (1 << DONE_INTERRUPT_ENABLE) | 651 (1 << LOCAL_ADDRESSING_MODE) | 652 (1 << DEMAND_MODE) | 653 (1 << DMA_EOT_ENABLE) | 654 (1 << FAST_SLOW_TERMINATE_MODE_SELECT) | 655 (1 << DMA_CHANNEL_INTERRUPT_SELECT), 656 dev->rdk1.plx9054_base_addr + DMAMODE0); 657 658 writel(0x100000, dev->rdk1.plx9054_base_addr + DMALADR0); 659 writel(buf, dev->rdk1.plx9054_base_addr + DMAPADR0); 660 writel(len, dev->rdk1.plx9054_base_addr + DMASIZ0); 661 writel((dir << DIRECTION_OF_TRANSFER) | 662 (1 << INTERRUPT_AFTER_TERMINAL_COUNT), 663 dev->rdk1.plx9054_base_addr + DMADPR0); 664 writel((1 << LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE) | 665 readl(dev->rdk1.plx9054_base_addr + INTCSR), 666 dev->rdk1.plx9054_base_addr + INTCSR); 667 668 break; 669 } 670 #endif 671 672 net2272_write(dev, DMAREQ, 673 (0 << DMA_BUFFER_VALID) | 674 (1 << DMA_REQUEST_ENABLE) | 675 (1 << DMA_CONTROL_DACK) | 676 (dev->dma_eot_polarity << EOT_POLARITY) | 677 (dev->dma_dack_polarity << DACK_POLARITY) | 678 (dev->dma_dreq_polarity << DREQ_POLARITY) | 679 ((ep >> 1) << DMA_ENDPOINT_SELECT)); 680 681 (void) net2272_read(dev, SCRATCH); 682 683 return 0; 684 } 685 686 static void 687 net2272_start_dma(struct net2272 *dev) 688 { 689 /* start platform's dma controller */ 690 #ifdef CONFIG_USB_PCI 691 switch (dev->dev_id) { 692 case PCI_DEVICE_ID_RDK1: 693 writeb((1 << CHANNEL_ENABLE) | (1 << CHANNEL_START), 694 dev->rdk1.plx9054_base_addr + DMACSR0); 695 break; 696 } 697 #endif 698 } 699 700 /* returns 0 on success, else negative errno */ 701 static int 702 net2272_kick_dma(struct net2272_ep *ep, struct net2272_request *req) 703 { 704 unsigned size; 705 u8 tmp; 706 707 if (!use_dma || (ep->num < 1) || (ep->num > 2) || !ep->dma) 708 return -EINVAL; 709 710 /* don't use dma for odd-length transfers 711 * otherwise, we'd need to deal with the last byte with pio 712 */ 713 if (req->req.length & 1) 714 return -EINVAL; 715 716 dev_vdbg(ep->dev->dev, "kick_dma %s req %p dma %08llx\n", 717 ep->ep.name, req, (unsigned long long) req->req.dma); 718 719 net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS); 720 721 /* The NET2272 can only use DMA on one endpoint at a time */ 722 if (ep->dev->dma_busy) 723 return -EBUSY; 724 725 /* Make sure we only DMA an even number of bytes (we'll use 726 * pio to complete the transfer) 727 */ 728 size = req->req.length; 729 size &= ~1; 730 731 /* device-to-host transfer */ 732 if (ep->is_in) { 733 /* initialize platform's dma controller */ 734 if (net2272_request_dma(ep->dev, ep->num, req->req.dma, size, 0)) 735 /* unable to obtain DMA channel; return error and use pio mode */ 736 return -EBUSY; 737 req->req.actual += size; 738 739 /* host-to-device transfer */ 740 } else { 741 tmp = net2272_ep_read(ep, EP_STAT0); 742 743 /* initialize platform's dma controller */ 744 if (net2272_request_dma(ep->dev, ep->num, req->req.dma, size, 1)) 745 /* unable to obtain DMA channel; return error and use pio mode */ 746 return -EBUSY; 747 748 if (!(tmp & (1 << BUFFER_EMPTY))) 749 ep->not_empty = 1; 750 else 751 ep->not_empty = 0; 752 753 754 /* allow the endpoint's buffer to fill */ 755 net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS); 756 757 /* this transfer completed and data's already in the fifo 758 * return error so pio gets used. 759 */ 760 if (tmp & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) { 761 762 /* deassert dreq */ 763 net2272_write(ep->dev, DMAREQ, 764 (0 << DMA_BUFFER_VALID) | 765 (0 << DMA_REQUEST_ENABLE) | 766 (1 << DMA_CONTROL_DACK) | 767 (ep->dev->dma_eot_polarity << EOT_POLARITY) | 768 (ep->dev->dma_dack_polarity << DACK_POLARITY) | 769 (ep->dev->dma_dreq_polarity << DREQ_POLARITY) | 770 ((ep->num >> 1) << DMA_ENDPOINT_SELECT)); 771 772 return -EBUSY; 773 } 774 } 775 776 /* Don't use per-packet interrupts: use dma interrupts only */ 777 net2272_ep_write(ep, EP_IRQENB, 0); 778 779 net2272_start_dma(ep->dev); 780 781 return 0; 782 } 783 784 static void net2272_cancel_dma(struct net2272 *dev) 785 { 786 #ifdef CONFIG_USB_PCI 787 switch (dev->dev_id) { 788 case PCI_DEVICE_ID_RDK1: 789 writeb(0, dev->rdk1.plx9054_base_addr + DMACSR0); 790 writeb(1 << CHANNEL_ABORT, dev->rdk1.plx9054_base_addr + DMACSR0); 791 while (!(readb(dev->rdk1.plx9054_base_addr + DMACSR0) & 792 (1 << CHANNEL_DONE))) 793 continue; /* wait for dma to stabalize */ 794 795 /* dma abort generates an interrupt */ 796 writeb(1 << CHANNEL_CLEAR_INTERRUPT, 797 dev->rdk1.plx9054_base_addr + DMACSR0); 798 break; 799 } 800 #endif 801 802 dev->dma_busy = 0; 803 } 804 805 /*---------------------------------------------------------------------------*/ 806 807 static int 808 net2272_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) 809 { 810 struct net2272_request *req; 811 struct net2272_ep *ep; 812 struct net2272 *dev; 813 unsigned long flags; 814 int status = -1; 815 u8 s; 816 817 req = container_of(_req, struct net2272_request, req); 818 if (!_req || !_req->complete || !_req->buf 819 || !list_empty(&req->queue)) 820 return -EINVAL; 821 ep = container_of(_ep, struct net2272_ep, ep); 822 if (!_ep || (!ep->desc && ep->num != 0)) 823 return -EINVAL; 824 dev = ep->dev; 825 if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) 826 return -ESHUTDOWN; 827 828 /* set up dma mapping in case the caller didn't */ 829 if (use_dma && ep->dma) { 830 status = usb_gadget_map_request(&dev->gadget, _req, 831 ep->is_in); 832 if (status) 833 return status; 834 } 835 836 dev_vdbg(dev->dev, "%s queue req %p, len %d buf %p dma %08llx %s\n", 837 _ep->name, _req, _req->length, _req->buf, 838 (unsigned long long) _req->dma, _req->zero ? "zero" : "!zero"); 839 840 spin_lock_irqsave(&dev->lock, flags); 841 842 _req->status = -EINPROGRESS; 843 _req->actual = 0; 844 845 /* kickstart this i/o queue? */ 846 if (list_empty(&ep->queue) && !ep->stopped) { 847 /* maybe there's no control data, just status ack */ 848 if (ep->num == 0 && _req->length == 0) { 849 net2272_done(ep, req, 0); 850 dev_vdbg(dev->dev, "%s status ack\n", ep->ep.name); 851 goto done; 852 } 853 854 /* Return zlp, don't let it block subsequent packets */ 855 s = net2272_ep_read(ep, EP_STAT0); 856 if (s & (1 << BUFFER_EMPTY)) { 857 /* Buffer is empty check for a blocking zlp, handle it */ 858 if ((s & (1 << NAK_OUT_PACKETS)) && 859 net2272_ep_read(ep, EP_STAT1) & (1 << LOCAL_OUT_ZLP)) { 860 dev_dbg(dev->dev, "WARNING: returning ZLP short packet termination!\n"); 861 /* 862 * Request is going to terminate with a short packet ... 863 * hope the client is ready for it! 864 */ 865 status = net2272_read_fifo(ep, req); 866 /* clear short packet naking */ 867 net2272_ep_write(ep, EP_STAT0, (1 << NAK_OUT_PACKETS)); 868 goto done; 869 } 870 } 871 872 /* try dma first */ 873 status = net2272_kick_dma(ep, req); 874 875 if (status < 0) { 876 /* dma failed (most likely in use by another endpoint) 877 * fallback to pio 878 */ 879 status = 0; 880 881 if (ep->is_in) 882 status = net2272_write_fifo(ep, req); 883 else { 884 s = net2272_ep_read(ep, EP_STAT0); 885 if ((s & (1 << BUFFER_EMPTY)) == 0) 886 status = net2272_read_fifo(ep, req); 887 } 888 889 if (unlikely(status != 0)) { 890 if (status > 0) 891 status = 0; 892 req = NULL; 893 } 894 } 895 } 896 if (likely(req)) 897 list_add_tail(&req->queue, &ep->queue); 898 899 if (likely(!list_empty(&ep->queue))) 900 net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS); 901 done: 902 spin_unlock_irqrestore(&dev->lock, flags); 903 904 return 0; 905 } 906 907 /* dequeue ALL requests */ 908 static void 909 net2272_dequeue_all(struct net2272_ep *ep) 910 { 911 struct net2272_request *req; 912 913 /* called with spinlock held */ 914 ep->stopped = 1; 915 916 while (!list_empty(&ep->queue)) { 917 req = list_entry(ep->queue.next, 918 struct net2272_request, 919 queue); 920 net2272_done(ep, req, -ESHUTDOWN); 921 } 922 } 923 924 /* dequeue JUST ONE request */ 925 static int 926 net2272_dequeue(struct usb_ep *_ep, struct usb_request *_req) 927 { 928 struct net2272_ep *ep; 929 struct net2272_request *req = NULL, *iter; 930 unsigned long flags; 931 int stopped; 932 933 ep = container_of(_ep, struct net2272_ep, ep); 934 if (!_ep || (!ep->desc && ep->num != 0) || !_req) 935 return -EINVAL; 936 937 spin_lock_irqsave(&ep->dev->lock, flags); 938 stopped = ep->stopped; 939 ep->stopped = 1; 940 941 /* make sure it's still queued on this endpoint */ 942 list_for_each_entry(iter, &ep->queue, queue) { 943 if (&iter->req != _req) 944 continue; 945 req = iter; 946 break; 947 } 948 if (!req) { 949 ep->stopped = stopped; 950 spin_unlock_irqrestore(&ep->dev->lock, flags); 951 return -EINVAL; 952 } 953 954 /* queue head may be partially complete */ 955 if (ep->queue.next == &req->queue) { 956 dev_dbg(ep->dev->dev, "unlink (%s) pio\n", _ep->name); 957 net2272_done(ep, req, -ECONNRESET); 958 } 959 ep->stopped = stopped; 960 961 spin_unlock_irqrestore(&ep->dev->lock, flags); 962 return 0; 963 } 964 965 /*---------------------------------------------------------------------------*/ 966 967 static int 968 net2272_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) 969 { 970 struct net2272_ep *ep; 971 unsigned long flags; 972 int ret = 0; 973 974 ep = container_of(_ep, struct net2272_ep, ep); 975 if (!_ep || (!ep->desc && ep->num != 0)) 976 return -EINVAL; 977 if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) 978 return -ESHUTDOWN; 979 if (ep->desc /* not ep0 */ && usb_endpoint_xfer_isoc(ep->desc)) 980 return -EINVAL; 981 982 spin_lock_irqsave(&ep->dev->lock, flags); 983 if (!list_empty(&ep->queue)) 984 ret = -EAGAIN; 985 else if (ep->is_in && value && net2272_fifo_status(_ep) != 0) 986 ret = -EAGAIN; 987 else { 988 dev_vdbg(ep->dev->dev, "%s %s %s\n", _ep->name, 989 value ? "set" : "clear", 990 wedged ? "wedge" : "halt"); 991 /* set/clear */ 992 if (value) { 993 if (ep->num == 0) 994 ep->dev->protocol_stall = 1; 995 else 996 set_halt(ep); 997 if (wedged) 998 ep->wedged = 1; 999 } else { 1000 clear_halt(ep); 1001 ep->wedged = 0; 1002 } 1003 } 1004 spin_unlock_irqrestore(&ep->dev->lock, flags); 1005 1006 return ret; 1007 } 1008 1009 static int 1010 net2272_set_halt(struct usb_ep *_ep, int value) 1011 { 1012 return net2272_set_halt_and_wedge(_ep, value, 0); 1013 } 1014 1015 static int 1016 net2272_set_wedge(struct usb_ep *_ep) 1017 { 1018 if (!_ep || _ep->name == ep0name) 1019 return -EINVAL; 1020 return net2272_set_halt_and_wedge(_ep, 1, 1); 1021 } 1022 1023 static int 1024 net2272_fifo_status(struct usb_ep *_ep) 1025 { 1026 struct net2272_ep *ep; 1027 u16 avail; 1028 1029 ep = container_of(_ep, struct net2272_ep, ep); 1030 if (!_ep || (!ep->desc && ep->num != 0)) 1031 return -ENODEV; 1032 if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) 1033 return -ESHUTDOWN; 1034 1035 avail = net2272_ep_read(ep, EP_AVAIL1) << 8; 1036 avail |= net2272_ep_read(ep, EP_AVAIL0); 1037 if (avail > ep->fifo_size) 1038 return -EOVERFLOW; 1039 if (ep->is_in) 1040 avail = ep->fifo_size - avail; 1041 return avail; 1042 } 1043 1044 static void 1045 net2272_fifo_flush(struct usb_ep *_ep) 1046 { 1047 struct net2272_ep *ep; 1048 1049 ep = container_of(_ep, struct net2272_ep, ep); 1050 if (!_ep || (!ep->desc && ep->num != 0)) 1051 return; 1052 if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) 1053 return; 1054 1055 net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH); 1056 } 1057 1058 static const struct usb_ep_ops net2272_ep_ops = { 1059 .enable = net2272_enable, 1060 .disable = net2272_disable, 1061 1062 .alloc_request = net2272_alloc_request, 1063 .free_request = net2272_free_request, 1064 1065 .queue = net2272_queue, 1066 .dequeue = net2272_dequeue, 1067 1068 .set_halt = net2272_set_halt, 1069 .set_wedge = net2272_set_wedge, 1070 .fifo_status = net2272_fifo_status, 1071 .fifo_flush = net2272_fifo_flush, 1072 }; 1073 1074 /*---------------------------------------------------------------------------*/ 1075 1076 static int 1077 net2272_get_frame(struct usb_gadget *_gadget) 1078 { 1079 struct net2272 *dev; 1080 unsigned long flags; 1081 u16 ret; 1082 1083 if (!_gadget) 1084 return -ENODEV; 1085 dev = container_of(_gadget, struct net2272, gadget); 1086 spin_lock_irqsave(&dev->lock, flags); 1087 1088 ret = net2272_read(dev, FRAME1) << 8; 1089 ret |= net2272_read(dev, FRAME0); 1090 1091 spin_unlock_irqrestore(&dev->lock, flags); 1092 return ret; 1093 } 1094 1095 static int 1096 net2272_wakeup(struct usb_gadget *_gadget) 1097 { 1098 struct net2272 *dev; 1099 u8 tmp; 1100 unsigned long flags; 1101 1102 if (!_gadget) 1103 return 0; 1104 dev = container_of(_gadget, struct net2272, gadget); 1105 1106 spin_lock_irqsave(&dev->lock, flags); 1107 tmp = net2272_read(dev, USBCTL0); 1108 if (tmp & (1 << IO_WAKEUP_ENABLE)) 1109 net2272_write(dev, USBCTL1, (1 << GENERATE_RESUME)); 1110 1111 spin_unlock_irqrestore(&dev->lock, flags); 1112 1113 return 0; 1114 } 1115 1116 static int 1117 net2272_set_selfpowered(struct usb_gadget *_gadget, int value) 1118 { 1119 if (!_gadget) 1120 return -ENODEV; 1121 1122 _gadget->is_selfpowered = (value != 0); 1123 1124 return 0; 1125 } 1126 1127 static int 1128 net2272_pullup(struct usb_gadget *_gadget, int is_on) 1129 { 1130 struct net2272 *dev; 1131 u8 tmp; 1132 unsigned long flags; 1133 1134 if (!_gadget) 1135 return -ENODEV; 1136 dev = container_of(_gadget, struct net2272, gadget); 1137 1138 spin_lock_irqsave(&dev->lock, flags); 1139 tmp = net2272_read(dev, USBCTL0); 1140 dev->softconnect = (is_on != 0); 1141 if (is_on) 1142 tmp |= (1 << USB_DETECT_ENABLE); 1143 else 1144 tmp &= ~(1 << USB_DETECT_ENABLE); 1145 net2272_write(dev, USBCTL0, tmp); 1146 spin_unlock_irqrestore(&dev->lock, flags); 1147 1148 return 0; 1149 } 1150 1151 static int net2272_start(struct usb_gadget *_gadget, 1152 struct usb_gadget_driver *driver); 1153 static int net2272_stop(struct usb_gadget *_gadget); 1154 static void net2272_async_callbacks(struct usb_gadget *_gadget, bool enable); 1155 1156 static const struct usb_gadget_ops net2272_ops = { 1157 .get_frame = net2272_get_frame, 1158 .wakeup = net2272_wakeup, 1159 .set_selfpowered = net2272_set_selfpowered, 1160 .pullup = net2272_pullup, 1161 .udc_start = net2272_start, 1162 .udc_stop = net2272_stop, 1163 .udc_async_callbacks = net2272_async_callbacks, 1164 }; 1165 1166 /*---------------------------------------------------------------------------*/ 1167 1168 static ssize_t 1169 registers_show(struct device *_dev, struct device_attribute *attr, char *buf) 1170 { 1171 struct net2272 *dev; 1172 char *next; 1173 unsigned size, t; 1174 unsigned long flags; 1175 u8 t1, t2; 1176 int i; 1177 const char *s; 1178 1179 dev = dev_get_drvdata(_dev); 1180 next = buf; 1181 size = PAGE_SIZE; 1182 spin_lock_irqsave(&dev->lock, flags); 1183 1184 /* Main Control Registers */ 1185 t = scnprintf(next, size, "%s version %s," 1186 "chiprev %02x, locctl %02x\n" 1187 "irqenb0 %02x irqenb1 %02x " 1188 "irqstat0 %02x irqstat1 %02x\n", 1189 driver_name, driver_vers, dev->chiprev, 1190 net2272_read(dev, LOCCTL), 1191 net2272_read(dev, IRQENB0), 1192 net2272_read(dev, IRQENB1), 1193 net2272_read(dev, IRQSTAT0), 1194 net2272_read(dev, IRQSTAT1)); 1195 size -= t; 1196 next += t; 1197 1198 /* DMA */ 1199 t1 = net2272_read(dev, DMAREQ); 1200 t = scnprintf(next, size, "\ndmareq %02x: %s %s%s%s%s\n", 1201 t1, ep_name[(t1 & 0x01) + 1], 1202 t1 & (1 << DMA_CONTROL_DACK) ? "dack " : "", 1203 t1 & (1 << DMA_REQUEST_ENABLE) ? "reqenb " : "", 1204 t1 & (1 << DMA_REQUEST) ? "req " : "", 1205 t1 & (1 << DMA_BUFFER_VALID) ? "valid " : ""); 1206 size -= t; 1207 next += t; 1208 1209 /* USB Control Registers */ 1210 t1 = net2272_read(dev, USBCTL1); 1211 if (t1 & (1 << VBUS_PIN)) { 1212 if (t1 & (1 << USB_HIGH_SPEED)) 1213 s = "high speed"; 1214 else if (dev->gadget.speed == USB_SPEED_UNKNOWN) 1215 s = "powered"; 1216 else 1217 s = "full speed"; 1218 } else 1219 s = "not attached"; 1220 t = scnprintf(next, size, 1221 "usbctl0 %02x usbctl1 %02x addr 0x%02x (%s)\n", 1222 net2272_read(dev, USBCTL0), t1, 1223 net2272_read(dev, OURADDR), s); 1224 size -= t; 1225 next += t; 1226 1227 /* Endpoint Registers */ 1228 for (i = 0; i < 4; ++i) { 1229 struct net2272_ep *ep; 1230 1231 ep = &dev->ep[i]; 1232 if (i && !ep->desc) 1233 continue; 1234 1235 t1 = net2272_ep_read(ep, EP_CFG); 1236 t2 = net2272_ep_read(ep, EP_RSPSET); 1237 t = scnprintf(next, size, 1238 "\n%s\tcfg %02x rsp (%02x) %s%s%s%s%s%s%s%s" 1239 "irqenb %02x\n", 1240 ep->ep.name, t1, t2, 1241 (t2 & (1 << ALT_NAK_OUT_PACKETS)) ? "NAK " : "", 1242 (t2 & (1 << HIDE_STATUS_PHASE)) ? "hide " : "", 1243 (t2 & (1 << AUTOVALIDATE)) ? "auto " : "", 1244 (t2 & (1 << INTERRUPT_MODE)) ? "interrupt " : "", 1245 (t2 & (1 << CONTROL_STATUS_PHASE_HANDSHAKE)) ? "status " : "", 1246 (t2 & (1 << NAK_OUT_PACKETS_MODE)) ? "NAKmode " : "", 1247 (t2 & (1 << ENDPOINT_TOGGLE)) ? "DATA1 " : "DATA0 ", 1248 (t2 & (1 << ENDPOINT_HALT)) ? "HALT " : "", 1249 net2272_ep_read(ep, EP_IRQENB)); 1250 size -= t; 1251 next += t; 1252 1253 t = scnprintf(next, size, 1254 "\tstat0 %02x stat1 %02x avail %04x " 1255 "(ep%d%s-%s)%s\n", 1256 net2272_ep_read(ep, EP_STAT0), 1257 net2272_ep_read(ep, EP_STAT1), 1258 (net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0), 1259 t1 & 0x0f, 1260 ep->is_in ? "in" : "out", 1261 type_string(t1 >> 5), 1262 ep->stopped ? "*" : ""); 1263 size -= t; 1264 next += t; 1265 1266 t = scnprintf(next, size, 1267 "\tep_transfer %06x\n", 1268 ((net2272_ep_read(ep, EP_TRANSFER2) & 0xff) << 16) | 1269 ((net2272_ep_read(ep, EP_TRANSFER1) & 0xff) << 8) | 1270 ((net2272_ep_read(ep, EP_TRANSFER0) & 0xff))); 1271 size -= t; 1272 next += t; 1273 1274 t1 = net2272_ep_read(ep, EP_BUFF_STATES) & 0x03; 1275 t2 = (net2272_ep_read(ep, EP_BUFF_STATES) >> 2) & 0x03; 1276 t = scnprintf(next, size, 1277 "\tbuf-a %s buf-b %s\n", 1278 buf_state_string(t1), 1279 buf_state_string(t2)); 1280 size -= t; 1281 next += t; 1282 } 1283 1284 spin_unlock_irqrestore(&dev->lock, flags); 1285 1286 return PAGE_SIZE - size; 1287 } 1288 static DEVICE_ATTR_RO(registers); 1289 1290 /*---------------------------------------------------------------------------*/ 1291 1292 static void 1293 net2272_set_fifo_mode(struct net2272 *dev, int mode) 1294 { 1295 u8 tmp; 1296 1297 tmp = net2272_read(dev, LOCCTL) & 0x3f; 1298 tmp |= (mode << 6); 1299 net2272_write(dev, LOCCTL, tmp); 1300 1301 INIT_LIST_HEAD(&dev->gadget.ep_list); 1302 1303 /* always ep-a, ep-c ... maybe not ep-b */ 1304 list_add_tail(&dev->ep[1].ep.ep_list, &dev->gadget.ep_list); 1305 1306 switch (mode) { 1307 case 0: 1308 list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list); 1309 dev->ep[1].fifo_size = dev->ep[2].fifo_size = 512; 1310 break; 1311 case 1: 1312 list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list); 1313 dev->ep[1].fifo_size = 1024; 1314 dev->ep[2].fifo_size = 512; 1315 break; 1316 case 2: 1317 list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list); 1318 dev->ep[1].fifo_size = dev->ep[2].fifo_size = 1024; 1319 break; 1320 case 3: 1321 dev->ep[1].fifo_size = 1024; 1322 break; 1323 } 1324 1325 /* ep-c is always 2 512 byte buffers */ 1326 list_add_tail(&dev->ep[3].ep.ep_list, &dev->gadget.ep_list); 1327 dev->ep[3].fifo_size = 512; 1328 } 1329 1330 /*---------------------------------------------------------------------------*/ 1331 1332 static void 1333 net2272_usb_reset(struct net2272 *dev) 1334 { 1335 dev->gadget.speed = USB_SPEED_UNKNOWN; 1336 1337 net2272_cancel_dma(dev); 1338 1339 net2272_write(dev, IRQENB0, 0); 1340 net2272_write(dev, IRQENB1, 0); 1341 1342 /* clear irq state */ 1343 net2272_write(dev, IRQSTAT0, 0xff); 1344 net2272_write(dev, IRQSTAT1, ~(1 << SUSPEND_REQUEST_INTERRUPT)); 1345 1346 net2272_write(dev, DMAREQ, 1347 (0 << DMA_BUFFER_VALID) | 1348 (0 << DMA_REQUEST_ENABLE) | 1349 (1 << DMA_CONTROL_DACK) | 1350 (dev->dma_eot_polarity << EOT_POLARITY) | 1351 (dev->dma_dack_polarity << DACK_POLARITY) | 1352 (dev->dma_dreq_polarity << DREQ_POLARITY) | 1353 ((dma_ep >> 1) << DMA_ENDPOINT_SELECT)); 1354 1355 net2272_cancel_dma(dev); 1356 net2272_set_fifo_mode(dev, (fifo_mode <= 3) ? fifo_mode : 0); 1357 1358 /* Set the NET2272 ep fifo data width to 16-bit mode and for correct byte swapping 1359 * note that the higher level gadget drivers are expected to convert data to little endian. 1360 * Enable byte swap for your local bus/cpu if needed by setting BYTE_SWAP in LOCCTL here 1361 */ 1362 net2272_write(dev, LOCCTL, net2272_read(dev, LOCCTL) | (1 << DATA_WIDTH)); 1363 net2272_write(dev, LOCCTL1, (dma_mode << DMA_MODE)); 1364 } 1365 1366 static void 1367 net2272_usb_reinit(struct net2272 *dev) 1368 { 1369 int i; 1370 1371 /* basic endpoint init */ 1372 for (i = 0; i < 4; ++i) { 1373 struct net2272_ep *ep = &dev->ep[i]; 1374 1375 ep->ep.name = ep_name[i]; 1376 ep->dev = dev; 1377 ep->num = i; 1378 ep->not_empty = 0; 1379 1380 if (use_dma && ep->num == dma_ep) 1381 ep->dma = 1; 1382 1383 if (i > 0 && i <= 3) 1384 ep->fifo_size = 512; 1385 else 1386 ep->fifo_size = 64; 1387 net2272_ep_reset(ep); 1388 1389 if (i == 0) { 1390 ep->ep.caps.type_control = true; 1391 } else { 1392 ep->ep.caps.type_iso = true; 1393 ep->ep.caps.type_bulk = true; 1394 ep->ep.caps.type_int = true; 1395 } 1396 1397 ep->ep.caps.dir_in = true; 1398 ep->ep.caps.dir_out = true; 1399 } 1400 usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 64); 1401 1402 dev->gadget.ep0 = &dev->ep[0].ep; 1403 dev->ep[0].stopped = 0; 1404 INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); 1405 } 1406 1407 static void 1408 net2272_ep0_start(struct net2272 *dev) 1409 { 1410 struct net2272_ep *ep0 = &dev->ep[0]; 1411 1412 net2272_ep_write(ep0, EP_RSPSET, 1413 (1 << NAK_OUT_PACKETS_MODE) | 1414 (1 << ALT_NAK_OUT_PACKETS)); 1415 net2272_ep_write(ep0, EP_RSPCLR, 1416 (1 << HIDE_STATUS_PHASE) | 1417 (1 << CONTROL_STATUS_PHASE_HANDSHAKE)); 1418 net2272_write(dev, USBCTL0, 1419 (dev->softconnect << USB_DETECT_ENABLE) | 1420 (1 << USB_ROOT_PORT_WAKEUP_ENABLE) | 1421 (1 << IO_WAKEUP_ENABLE)); 1422 net2272_write(dev, IRQENB0, 1423 (1 << SETUP_PACKET_INTERRUPT_ENABLE) | 1424 (1 << ENDPOINT_0_INTERRUPT_ENABLE) | 1425 (1 << DMA_DONE_INTERRUPT_ENABLE)); 1426 net2272_write(dev, IRQENB1, 1427 (1 << VBUS_INTERRUPT_ENABLE) | 1428 (1 << ROOT_PORT_RESET_INTERRUPT_ENABLE) | 1429 (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE)); 1430 } 1431 1432 /* when a driver is successfully registered, it will receive 1433 * control requests including set_configuration(), which enables 1434 * non-control requests. then usb traffic follows until a 1435 * disconnect is reported. then a host may connect again, or 1436 * the driver might get unbound. 1437 */ 1438 static int net2272_start(struct usb_gadget *_gadget, 1439 struct usb_gadget_driver *driver) 1440 { 1441 struct net2272 *dev; 1442 unsigned i; 1443 1444 if (!driver || !driver->setup || 1445 driver->max_speed != USB_SPEED_HIGH) 1446 return -EINVAL; 1447 1448 dev = container_of(_gadget, struct net2272, gadget); 1449 1450 for (i = 0; i < 4; ++i) 1451 dev->ep[i].irqs = 0; 1452 /* hook up the driver ... */ 1453 dev->softconnect = 1; 1454 dev->driver = driver; 1455 1456 /* ... then enable host detection and ep0; and we're ready 1457 * for set_configuration as well as eventual disconnect. 1458 */ 1459 net2272_ep0_start(dev); 1460 1461 return 0; 1462 } 1463 1464 static void 1465 stop_activity(struct net2272 *dev, struct usb_gadget_driver *driver) 1466 { 1467 int i; 1468 1469 /* don't disconnect if it's not connected */ 1470 if (dev->gadget.speed == USB_SPEED_UNKNOWN) 1471 driver = NULL; 1472 1473 /* stop hardware; prevent new request submissions; 1474 * and kill any outstanding requests. 1475 */ 1476 net2272_usb_reset(dev); 1477 for (i = 0; i < 4; ++i) 1478 net2272_dequeue_all(&dev->ep[i]); 1479 1480 /* report disconnect; the driver is already quiesced */ 1481 if (dev->async_callbacks && driver) { 1482 spin_unlock(&dev->lock); 1483 driver->disconnect(&dev->gadget); 1484 spin_lock(&dev->lock); 1485 } 1486 1487 net2272_usb_reinit(dev); 1488 } 1489 1490 static int net2272_stop(struct usb_gadget *_gadget) 1491 { 1492 struct net2272 *dev; 1493 unsigned long flags; 1494 1495 dev = container_of(_gadget, struct net2272, gadget); 1496 1497 spin_lock_irqsave(&dev->lock, flags); 1498 stop_activity(dev, NULL); 1499 spin_unlock_irqrestore(&dev->lock, flags); 1500 1501 dev->driver = NULL; 1502 1503 return 0; 1504 } 1505 1506 static void net2272_async_callbacks(struct usb_gadget *_gadget, bool enable) 1507 { 1508 struct net2272 *dev = container_of(_gadget, struct net2272, gadget); 1509 1510 spin_lock_irq(&dev->lock); 1511 dev->async_callbacks = enable; 1512 spin_unlock_irq(&dev->lock); 1513 } 1514 1515 /*---------------------------------------------------------------------------*/ 1516 /* handle ep-a/ep-b dma completions */ 1517 static void 1518 net2272_handle_dma(struct net2272_ep *ep) 1519 { 1520 struct net2272_request *req; 1521 unsigned len; 1522 int status; 1523 1524 if (!list_empty(&ep->queue)) 1525 req = list_entry(ep->queue.next, 1526 struct net2272_request, queue); 1527 else 1528 req = NULL; 1529 1530 dev_vdbg(ep->dev->dev, "handle_dma %s req %p\n", ep->ep.name, req); 1531 1532 /* Ensure DREQ is de-asserted */ 1533 net2272_write(ep->dev, DMAREQ, 1534 (0 << DMA_BUFFER_VALID) 1535 | (0 << DMA_REQUEST_ENABLE) 1536 | (1 << DMA_CONTROL_DACK) 1537 | (ep->dev->dma_eot_polarity << EOT_POLARITY) 1538 | (ep->dev->dma_dack_polarity << DACK_POLARITY) 1539 | (ep->dev->dma_dreq_polarity << DREQ_POLARITY) 1540 | (ep->dma << DMA_ENDPOINT_SELECT)); 1541 1542 ep->dev->dma_busy = 0; 1543 1544 net2272_ep_write(ep, EP_IRQENB, 1545 (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) 1546 | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE) 1547 | net2272_ep_read(ep, EP_IRQENB)); 1548 1549 /* device-to-host transfer completed */ 1550 if (ep->is_in) { 1551 /* validate a short packet or zlp if necessary */ 1552 if ((req->req.length % ep->ep.maxpacket != 0) || 1553 req->req.zero) 1554 set_fifo_bytecount(ep, 0); 1555 1556 net2272_done(ep, req, 0); 1557 if (!list_empty(&ep->queue)) { 1558 req = list_entry(ep->queue.next, 1559 struct net2272_request, queue); 1560 status = net2272_kick_dma(ep, req); 1561 if (status < 0) 1562 net2272_pio_advance(ep); 1563 } 1564 1565 /* host-to-device transfer completed */ 1566 } else { 1567 /* terminated with a short packet? */ 1568 if (net2272_read(ep->dev, IRQSTAT0) & 1569 (1 << DMA_DONE_INTERRUPT)) { 1570 /* abort system dma */ 1571 net2272_cancel_dma(ep->dev); 1572 } 1573 1574 /* EP_TRANSFER will contain the number of bytes 1575 * actually received. 1576 * NOTE: There is no overflow detection on EP_TRANSFER: 1577 * We can't deal with transfers larger than 2^24 bytes! 1578 */ 1579 len = (net2272_ep_read(ep, EP_TRANSFER2) << 16) 1580 | (net2272_ep_read(ep, EP_TRANSFER1) << 8) 1581 | (net2272_ep_read(ep, EP_TRANSFER0)); 1582 1583 if (ep->not_empty) 1584 len += 4; 1585 1586 req->req.actual += len; 1587 1588 /* get any remaining data */ 1589 net2272_pio_advance(ep); 1590 } 1591 } 1592 1593 /*---------------------------------------------------------------------------*/ 1594 1595 static void 1596 net2272_handle_ep(struct net2272_ep *ep) 1597 { 1598 struct net2272_request *req; 1599 u8 stat0, stat1; 1600 1601 if (!list_empty(&ep->queue)) 1602 req = list_entry(ep->queue.next, 1603 struct net2272_request, queue); 1604 else 1605 req = NULL; 1606 1607 /* ack all, and handle what we care about */ 1608 stat0 = net2272_ep_read(ep, EP_STAT0); 1609 stat1 = net2272_ep_read(ep, EP_STAT1); 1610 ep->irqs++; 1611 1612 dev_vdbg(ep->dev->dev, "%s ack ep_stat0 %02x, ep_stat1 %02x, req %p\n", 1613 ep->ep.name, stat0, stat1, req ? &req->req : NULL); 1614 1615 net2272_ep_write(ep, EP_STAT0, stat0 & 1616 ~((1 << NAK_OUT_PACKETS) 1617 | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT))); 1618 net2272_ep_write(ep, EP_STAT1, stat1); 1619 1620 /* data packet(s) received (in the fifo, OUT) 1621 * direction must be validated, otherwise control read status phase 1622 * could be interpreted as a valid packet 1623 */ 1624 if (!ep->is_in && (stat0 & (1 << DATA_PACKET_RECEIVED_INTERRUPT))) 1625 net2272_pio_advance(ep); 1626 /* data packet(s) transmitted (IN) */ 1627 else if (stat0 & (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)) 1628 net2272_pio_advance(ep); 1629 } 1630 1631 static struct net2272_ep * 1632 net2272_get_ep_by_addr(struct net2272 *dev, u16 wIndex) 1633 { 1634 struct net2272_ep *ep; 1635 1636 if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) 1637 return &dev->ep[0]; 1638 1639 list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) { 1640 u8 bEndpointAddress; 1641 1642 if (!ep->desc) 1643 continue; 1644 bEndpointAddress = ep->desc->bEndpointAddress; 1645 if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) 1646 continue; 1647 if ((wIndex & 0x0f) == (bEndpointAddress & 0x0f)) 1648 return ep; 1649 } 1650 return NULL; 1651 } 1652 1653 /* 1654 * USB Test Packet: 1655 * JKJKJKJK * 9 1656 * JJKKJJKK * 8 1657 * JJJJKKKK * 8 1658 * JJJJJJJKKKKKKK * 8 1659 * JJJJJJJK * 8 1660 * {JKKKKKKK * 10}, JK 1661 */ 1662 static const u8 net2272_test_packet[] = { 1663 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 1664 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 1665 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 1666 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 1667 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 1668 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFD, 0x7E 1669 }; 1670 1671 static void 1672 net2272_set_test_mode(struct net2272 *dev, int mode) 1673 { 1674 int i; 1675 1676 /* Disable all net2272 interrupts: 1677 * Nothing but a power cycle should stop the test. 1678 */ 1679 net2272_write(dev, IRQENB0, 0x00); 1680 net2272_write(dev, IRQENB1, 0x00); 1681 1682 /* Force tranceiver to high-speed */ 1683 net2272_write(dev, XCVRDIAG, 1 << FORCE_HIGH_SPEED); 1684 1685 net2272_write(dev, PAGESEL, 0); 1686 net2272_write(dev, EP_STAT0, 1 << DATA_PACKET_TRANSMITTED_INTERRUPT); 1687 net2272_write(dev, EP_RSPCLR, 1688 (1 << CONTROL_STATUS_PHASE_HANDSHAKE) 1689 | (1 << HIDE_STATUS_PHASE)); 1690 net2272_write(dev, EP_CFG, 1 << ENDPOINT_DIRECTION); 1691 net2272_write(dev, EP_STAT1, 1 << BUFFER_FLUSH); 1692 1693 /* wait for status phase to complete */ 1694 while (!(net2272_read(dev, EP_STAT0) & 1695 (1 << DATA_PACKET_TRANSMITTED_INTERRUPT))) 1696 ; 1697 1698 /* Enable test mode */ 1699 net2272_write(dev, USBTEST, mode); 1700 1701 /* load test packet */ 1702 if (mode == USB_TEST_PACKET) { 1703 /* switch to 8 bit mode */ 1704 net2272_write(dev, LOCCTL, net2272_read(dev, LOCCTL) & 1705 ~(1 << DATA_WIDTH)); 1706 1707 for (i = 0; i < sizeof(net2272_test_packet); ++i) 1708 net2272_write(dev, EP_DATA, net2272_test_packet[i]); 1709 1710 /* Validate test packet */ 1711 net2272_write(dev, EP_TRANSFER0, 0); 1712 } 1713 } 1714 1715 static void 1716 net2272_handle_stat0_irqs(struct net2272 *dev, u8 stat) 1717 { 1718 struct net2272_ep *ep; 1719 u8 num, scratch; 1720 1721 /* starting a control request? */ 1722 if (unlikely(stat & (1 << SETUP_PACKET_INTERRUPT))) { 1723 union { 1724 u8 raw[8]; 1725 struct usb_ctrlrequest r; 1726 } u; 1727 int tmp = 0; 1728 struct net2272_request *req; 1729 1730 if (dev->gadget.speed == USB_SPEED_UNKNOWN) { 1731 if (net2272_read(dev, USBCTL1) & (1 << USB_HIGH_SPEED)) 1732 dev->gadget.speed = USB_SPEED_HIGH; 1733 else 1734 dev->gadget.speed = USB_SPEED_FULL; 1735 dev_dbg(dev->dev, "%s\n", 1736 usb_speed_string(dev->gadget.speed)); 1737 } 1738 1739 ep = &dev->ep[0]; 1740 ep->irqs++; 1741 1742 /* make sure any leftover interrupt state is cleared */ 1743 stat &= ~(1 << ENDPOINT_0_INTERRUPT); 1744 while (!list_empty(&ep->queue)) { 1745 req = list_entry(ep->queue.next, 1746 struct net2272_request, queue); 1747 net2272_done(ep, req, 1748 (req->req.actual == req->req.length) ? 0 : -EPROTO); 1749 } 1750 ep->stopped = 0; 1751 dev->protocol_stall = 0; 1752 net2272_ep_write(ep, EP_STAT0, 1753 (1 << DATA_IN_TOKEN_INTERRUPT) 1754 | (1 << DATA_OUT_TOKEN_INTERRUPT) 1755 | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) 1756 | (1 << DATA_PACKET_RECEIVED_INTERRUPT) 1757 | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)); 1758 net2272_ep_write(ep, EP_STAT1, 1759 (1 << TIMEOUT) 1760 | (1 << USB_OUT_ACK_SENT) 1761 | (1 << USB_OUT_NAK_SENT) 1762 | (1 << USB_IN_ACK_RCVD) 1763 | (1 << USB_IN_NAK_SENT) 1764 | (1 << USB_STALL_SENT) 1765 | (1 << LOCAL_OUT_ZLP)); 1766 1767 /* 1768 * Ensure Control Read pre-validation setting is beyond maximum size 1769 * - Control Writes can leave non-zero values in EP_TRANSFER. If 1770 * an EP0 transfer following the Control Write is a Control Read, 1771 * the NET2272 sees the non-zero EP_TRANSFER as an unexpected 1772 * pre-validation count. 1773 * - Setting EP_TRANSFER beyond the maximum EP0 transfer size ensures 1774 * the pre-validation count cannot cause an unexpected validatation 1775 */ 1776 net2272_write(dev, PAGESEL, 0); 1777 net2272_write(dev, EP_TRANSFER2, 0xff); 1778 net2272_write(dev, EP_TRANSFER1, 0xff); 1779 net2272_write(dev, EP_TRANSFER0, 0xff); 1780 1781 u.raw[0] = net2272_read(dev, SETUP0); 1782 u.raw[1] = net2272_read(dev, SETUP1); 1783 u.raw[2] = net2272_read(dev, SETUP2); 1784 u.raw[3] = net2272_read(dev, SETUP3); 1785 u.raw[4] = net2272_read(dev, SETUP4); 1786 u.raw[5] = net2272_read(dev, SETUP5); 1787 u.raw[6] = net2272_read(dev, SETUP6); 1788 u.raw[7] = net2272_read(dev, SETUP7); 1789 /* 1790 * If you have a big endian cpu make sure le16_to_cpus 1791 * performs the proper byte swapping here... 1792 */ 1793 le16_to_cpus(&u.r.wValue); 1794 le16_to_cpus(&u.r.wIndex); 1795 le16_to_cpus(&u.r.wLength); 1796 1797 /* ack the irq */ 1798 net2272_write(dev, IRQSTAT0, 1 << SETUP_PACKET_INTERRUPT); 1799 stat ^= (1 << SETUP_PACKET_INTERRUPT); 1800 1801 /* watch control traffic at the token level, and force 1802 * synchronization before letting the status phase happen. 1803 */ 1804 ep->is_in = (u.r.bRequestType & USB_DIR_IN) != 0; 1805 if (ep->is_in) { 1806 scratch = (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE) 1807 | (1 << DATA_OUT_TOKEN_INTERRUPT_ENABLE) 1808 | (1 << DATA_IN_TOKEN_INTERRUPT_ENABLE); 1809 stop_out_naking(ep); 1810 } else 1811 scratch = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) 1812 | (1 << DATA_OUT_TOKEN_INTERRUPT_ENABLE) 1813 | (1 << DATA_IN_TOKEN_INTERRUPT_ENABLE); 1814 net2272_ep_write(ep, EP_IRQENB, scratch); 1815 1816 if ((u.r.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) 1817 goto delegate; 1818 switch (u.r.bRequest) { 1819 case USB_REQ_GET_STATUS: { 1820 struct net2272_ep *e; 1821 u16 status = 0; 1822 1823 switch (u.r.bRequestType & USB_RECIP_MASK) { 1824 case USB_RECIP_ENDPOINT: 1825 e = net2272_get_ep_by_addr(dev, u.r.wIndex); 1826 if (!e || u.r.wLength > 2) 1827 goto do_stall; 1828 if (net2272_ep_read(e, EP_RSPSET) & (1 << ENDPOINT_HALT)) 1829 status = cpu_to_le16(1); 1830 else 1831 status = cpu_to_le16(0); 1832 1833 /* don't bother with a request object! */ 1834 net2272_ep_write(&dev->ep[0], EP_IRQENB, 0); 1835 writew(status, net2272_reg_addr(dev, EP_DATA)); 1836 set_fifo_bytecount(&dev->ep[0], 0); 1837 allow_status(ep); 1838 dev_vdbg(dev->dev, "%s stat %02x\n", 1839 ep->ep.name, status); 1840 goto next_endpoints; 1841 case USB_RECIP_DEVICE: 1842 if (u.r.wLength > 2) 1843 goto do_stall; 1844 if (dev->gadget.is_selfpowered) 1845 status = (1 << USB_DEVICE_SELF_POWERED); 1846 1847 /* don't bother with a request object! */ 1848 net2272_ep_write(&dev->ep[0], EP_IRQENB, 0); 1849 writew(status, net2272_reg_addr(dev, EP_DATA)); 1850 set_fifo_bytecount(&dev->ep[0], 0); 1851 allow_status(ep); 1852 dev_vdbg(dev->dev, "device stat %02x\n", status); 1853 goto next_endpoints; 1854 case USB_RECIP_INTERFACE: 1855 if (u.r.wLength > 2) 1856 goto do_stall; 1857 1858 /* don't bother with a request object! */ 1859 net2272_ep_write(&dev->ep[0], EP_IRQENB, 0); 1860 writew(status, net2272_reg_addr(dev, EP_DATA)); 1861 set_fifo_bytecount(&dev->ep[0], 0); 1862 allow_status(ep); 1863 dev_vdbg(dev->dev, "interface status %02x\n", status); 1864 goto next_endpoints; 1865 } 1866 1867 break; 1868 } 1869 case USB_REQ_CLEAR_FEATURE: { 1870 struct net2272_ep *e; 1871 1872 if (u.r.bRequestType != USB_RECIP_ENDPOINT) 1873 goto delegate; 1874 if (u.r.wValue != USB_ENDPOINT_HALT || 1875 u.r.wLength != 0) 1876 goto do_stall; 1877 e = net2272_get_ep_by_addr(dev, u.r.wIndex); 1878 if (!e) 1879 goto do_stall; 1880 if (e->wedged) { 1881 dev_vdbg(dev->dev, "%s wedged, halt not cleared\n", 1882 ep->ep.name); 1883 } else { 1884 dev_vdbg(dev->dev, "%s clear halt\n", ep->ep.name); 1885 clear_halt(e); 1886 } 1887 allow_status(ep); 1888 goto next_endpoints; 1889 } 1890 case USB_REQ_SET_FEATURE: { 1891 struct net2272_ep *e; 1892 1893 if (u.r.bRequestType == USB_RECIP_DEVICE) { 1894 if (u.r.wIndex != NORMAL_OPERATION) 1895 net2272_set_test_mode(dev, (u.r.wIndex >> 8)); 1896 allow_status(ep); 1897 dev_vdbg(dev->dev, "test mode: %d\n", u.r.wIndex); 1898 goto next_endpoints; 1899 } else if (u.r.bRequestType != USB_RECIP_ENDPOINT) 1900 goto delegate; 1901 if (u.r.wValue != USB_ENDPOINT_HALT || 1902 u.r.wLength != 0) 1903 goto do_stall; 1904 e = net2272_get_ep_by_addr(dev, u.r.wIndex); 1905 if (!e) 1906 goto do_stall; 1907 set_halt(e); 1908 allow_status(ep); 1909 dev_vdbg(dev->dev, "%s set halt\n", ep->ep.name); 1910 goto next_endpoints; 1911 } 1912 case USB_REQ_SET_ADDRESS: { 1913 net2272_write(dev, OURADDR, u.r.wValue & 0xff); 1914 allow_status(ep); 1915 break; 1916 } 1917 default: 1918 delegate: 1919 dev_vdbg(dev->dev, "setup %02x.%02x v%04x i%04x " 1920 "ep_cfg %08x\n", 1921 u.r.bRequestType, u.r.bRequest, 1922 u.r.wValue, u.r.wIndex, 1923 net2272_ep_read(ep, EP_CFG)); 1924 if (dev->async_callbacks) { 1925 spin_unlock(&dev->lock); 1926 tmp = dev->driver->setup(&dev->gadget, &u.r); 1927 spin_lock(&dev->lock); 1928 } 1929 } 1930 1931 /* stall ep0 on error */ 1932 if (tmp < 0) { 1933 do_stall: 1934 dev_vdbg(dev->dev, "req %02x.%02x protocol STALL; stat %d\n", 1935 u.r.bRequestType, u.r.bRequest, tmp); 1936 dev->protocol_stall = 1; 1937 } 1938 /* endpoint dma irq? */ 1939 } else if (stat & (1 << DMA_DONE_INTERRUPT)) { 1940 net2272_cancel_dma(dev); 1941 net2272_write(dev, IRQSTAT0, 1 << DMA_DONE_INTERRUPT); 1942 stat &= ~(1 << DMA_DONE_INTERRUPT); 1943 num = (net2272_read(dev, DMAREQ) & (1 << DMA_ENDPOINT_SELECT)) 1944 ? 2 : 1; 1945 1946 ep = &dev->ep[num]; 1947 net2272_handle_dma(ep); 1948 } 1949 1950 next_endpoints: 1951 /* endpoint data irq? */ 1952 scratch = stat & 0x0f; 1953 stat &= ~0x0f; 1954 for (num = 0; scratch; num++) { 1955 u8 t; 1956 1957 /* does this endpoint's FIFO and queue need tending? */ 1958 t = 1 << num; 1959 if ((scratch & t) == 0) 1960 continue; 1961 scratch ^= t; 1962 1963 ep = &dev->ep[num]; 1964 net2272_handle_ep(ep); 1965 } 1966 1967 /* some interrupts we can just ignore */ 1968 stat &= ~(1 << SOF_INTERRUPT); 1969 1970 if (stat) 1971 dev_dbg(dev->dev, "unhandled irqstat0 %02x\n", stat); 1972 } 1973 1974 static void 1975 net2272_handle_stat1_irqs(struct net2272 *dev, u8 stat) 1976 { 1977 u8 tmp, mask; 1978 1979 /* after disconnect there's nothing else to do! */ 1980 tmp = (1 << VBUS_INTERRUPT) | (1 << ROOT_PORT_RESET_INTERRUPT); 1981 mask = (1 << USB_HIGH_SPEED) | (1 << USB_FULL_SPEED); 1982 1983 if (stat & tmp) { 1984 bool reset = false; 1985 bool disconnect = false; 1986 1987 /* 1988 * Ignore disconnects and resets if the speed hasn't been set. 1989 * VBUS can bounce and there's always an initial reset. 1990 */ 1991 net2272_write(dev, IRQSTAT1, tmp); 1992 if (dev->gadget.speed != USB_SPEED_UNKNOWN) { 1993 if ((stat & (1 << VBUS_INTERRUPT)) && 1994 (net2272_read(dev, USBCTL1) & 1995 (1 << VBUS_PIN)) == 0) { 1996 disconnect = true; 1997 dev_dbg(dev->dev, "disconnect %s\n", 1998 dev->driver->driver.name); 1999 } else if ((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) && 2000 (net2272_read(dev, USBCTL1) & mask) 2001 == 0) { 2002 reset = true; 2003 dev_dbg(dev->dev, "reset %s\n", 2004 dev->driver->driver.name); 2005 } 2006 2007 if (disconnect || reset) { 2008 stop_activity(dev, dev->driver); 2009 net2272_ep0_start(dev); 2010 if (dev->async_callbacks) { 2011 spin_unlock(&dev->lock); 2012 if (reset) 2013 usb_gadget_udc_reset(&dev->gadget, dev->driver); 2014 else 2015 (dev->driver->disconnect)(&dev->gadget); 2016 spin_lock(&dev->lock); 2017 } 2018 return; 2019 } 2020 } 2021 stat &= ~tmp; 2022 2023 if (!stat) 2024 return; 2025 } 2026 2027 tmp = (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT); 2028 if (stat & tmp) { 2029 net2272_write(dev, IRQSTAT1, tmp); 2030 if (stat & (1 << SUSPEND_REQUEST_INTERRUPT)) { 2031 if (dev->async_callbacks && dev->driver->suspend) 2032 dev->driver->suspend(&dev->gadget); 2033 if (!enable_suspend) { 2034 stat &= ~(1 << SUSPEND_REQUEST_INTERRUPT); 2035 dev_dbg(dev->dev, "Suspend disabled, ignoring\n"); 2036 } 2037 } else { 2038 if (dev->async_callbacks && dev->driver->resume) 2039 dev->driver->resume(&dev->gadget); 2040 } 2041 stat &= ~tmp; 2042 } 2043 2044 /* clear any other status/irqs */ 2045 if (stat) 2046 net2272_write(dev, IRQSTAT1, stat); 2047 2048 /* some status we can just ignore */ 2049 stat &= ~((1 << CONTROL_STATUS_INTERRUPT) 2050 | (1 << SUSPEND_REQUEST_INTERRUPT) 2051 | (1 << RESUME_INTERRUPT)); 2052 if (!stat) 2053 return; 2054 else 2055 dev_dbg(dev->dev, "unhandled irqstat1 %02x\n", stat); 2056 } 2057 2058 static irqreturn_t net2272_irq(int irq, void *_dev) 2059 { 2060 struct net2272 *dev = _dev; 2061 #if defined(PLX_PCI_RDK) || defined(PLX_PCI_RDK2) 2062 u32 intcsr; 2063 #endif 2064 #if defined(PLX_PCI_RDK) 2065 u8 dmareq; 2066 #endif 2067 spin_lock(&dev->lock); 2068 #if defined(PLX_PCI_RDK) 2069 intcsr = readl(dev->rdk1.plx9054_base_addr + INTCSR); 2070 2071 if ((intcsr & LOCAL_INTERRUPT_TEST) == LOCAL_INTERRUPT_TEST) { 2072 writel(intcsr & ~(1 << PCI_INTERRUPT_ENABLE), 2073 dev->rdk1.plx9054_base_addr + INTCSR); 2074 net2272_handle_stat1_irqs(dev, net2272_read(dev, IRQSTAT1)); 2075 net2272_handle_stat0_irqs(dev, net2272_read(dev, IRQSTAT0)); 2076 intcsr = readl(dev->rdk1.plx9054_base_addr + INTCSR); 2077 writel(intcsr | (1 << PCI_INTERRUPT_ENABLE), 2078 dev->rdk1.plx9054_base_addr + INTCSR); 2079 } 2080 if ((intcsr & DMA_CHANNEL_0_TEST) == DMA_CHANNEL_0_TEST) { 2081 writeb((1 << CHANNEL_CLEAR_INTERRUPT | (0 << CHANNEL_ENABLE)), 2082 dev->rdk1.plx9054_base_addr + DMACSR0); 2083 2084 dmareq = net2272_read(dev, DMAREQ); 2085 if (dmareq & 0x01) 2086 net2272_handle_dma(&dev->ep[2]); 2087 else 2088 net2272_handle_dma(&dev->ep[1]); 2089 } 2090 #endif 2091 #if defined(PLX_PCI_RDK2) 2092 /* see if PCI int for us by checking irqstat */ 2093 intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT); 2094 if (!(intcsr & (1 << NET2272_PCI_IRQ))) { 2095 spin_unlock(&dev->lock); 2096 return IRQ_NONE; 2097 } 2098 /* check dma interrupts */ 2099 #endif 2100 /* Platform/devcice interrupt handler */ 2101 #if !defined(PLX_PCI_RDK) 2102 net2272_handle_stat1_irqs(dev, net2272_read(dev, IRQSTAT1)); 2103 net2272_handle_stat0_irqs(dev, net2272_read(dev, IRQSTAT0)); 2104 #endif 2105 spin_unlock(&dev->lock); 2106 2107 return IRQ_HANDLED; 2108 } 2109 2110 static int net2272_present(struct net2272 *dev) 2111 { 2112 /* 2113 * Quick test to see if CPU can communicate properly with the NET2272. 2114 * Verifies connection using writes and reads to write/read and 2115 * read-only registers. 2116 * 2117 * This routine is strongly recommended especially during early bring-up 2118 * of new hardware, however for designs that do not apply Power On System 2119 * Tests (POST) it may discarded (or perhaps minimized). 2120 */ 2121 unsigned int ii; 2122 u8 val, refval; 2123 2124 /* Verify NET2272 write/read SCRATCH register can write and read */ 2125 refval = net2272_read(dev, SCRATCH); 2126 for (ii = 0; ii < 0x100; ii += 7) { 2127 net2272_write(dev, SCRATCH, ii); 2128 val = net2272_read(dev, SCRATCH); 2129 if (val != ii) { 2130 dev_dbg(dev->dev, 2131 "%s: write/read SCRATCH register test failed: " 2132 "wrote:0x%2.2x, read:0x%2.2x\n", 2133 __func__, ii, val); 2134 return -EINVAL; 2135 } 2136 } 2137 /* To be nice, we write the original SCRATCH value back: */ 2138 net2272_write(dev, SCRATCH, refval); 2139 2140 /* Verify NET2272 CHIPREV register is read-only: */ 2141 refval = net2272_read(dev, CHIPREV_2272); 2142 for (ii = 0; ii < 0x100; ii += 7) { 2143 net2272_write(dev, CHIPREV_2272, ii); 2144 val = net2272_read(dev, CHIPREV_2272); 2145 if (val != refval) { 2146 dev_dbg(dev->dev, 2147 "%s: write/read CHIPREV register test failed: " 2148 "wrote 0x%2.2x, read:0x%2.2x expected:0x%2.2x\n", 2149 __func__, ii, val, refval); 2150 return -EINVAL; 2151 } 2152 } 2153 2154 /* 2155 * Verify NET2272's "NET2270 legacy revision" register 2156 * - NET2272 has two revision registers. The NET2270 legacy revision 2157 * register should read the same value, regardless of the NET2272 2158 * silicon revision. The legacy register applies to NET2270 2159 * firmware being applied to the NET2272. 2160 */ 2161 val = net2272_read(dev, CHIPREV_LEGACY); 2162 if (val != NET2270_LEGACY_REV) { 2163 /* 2164 * Unexpected legacy revision value 2165 * - Perhaps the chip is a NET2270? 2166 */ 2167 dev_dbg(dev->dev, 2168 "%s: WARNING: UNEXPECTED NET2272 LEGACY REGISTER VALUE:\n" 2169 " - CHIPREV_LEGACY: expected 0x%2.2x, got:0x%2.2x. (Not NET2272?)\n", 2170 __func__, NET2270_LEGACY_REV, val); 2171 return -EINVAL; 2172 } 2173 2174 /* 2175 * Verify NET2272 silicon revision 2176 * - This revision register is appropriate for the silicon version 2177 * of the NET2272 2178 */ 2179 val = net2272_read(dev, CHIPREV_2272); 2180 switch (val) { 2181 case CHIPREV_NET2272_R1: 2182 /* 2183 * NET2272 Rev 1 has DMA related errata: 2184 * - Newer silicon (Rev 1A or better) required 2185 */ 2186 dev_dbg(dev->dev, 2187 "%s: Rev 1 detected: newer silicon recommended for DMA support\n", 2188 __func__); 2189 break; 2190 case CHIPREV_NET2272_R1A: 2191 break; 2192 default: 2193 /* NET2272 silicon version *may* not work with this firmware */ 2194 dev_dbg(dev->dev, 2195 "%s: unexpected silicon revision register value: " 2196 " CHIPREV_2272: 0x%2.2x\n", 2197 __func__, val); 2198 /* 2199 * Return Success, even though the chip rev is not an expected value 2200 * - Older, pre-built firmware can attempt to operate on newer silicon 2201 * - Often, new silicon is perfectly compatible 2202 */ 2203 } 2204 2205 /* Success: NET2272 checks out OK */ 2206 return 0; 2207 } 2208 2209 static void 2210 net2272_gadget_release(struct device *_dev) 2211 { 2212 struct net2272 *dev = container_of(_dev, struct net2272, gadget.dev); 2213 2214 kfree(dev); 2215 } 2216 2217 /*---------------------------------------------------------------------------*/ 2218 2219 static void 2220 net2272_remove(struct net2272 *dev) 2221 { 2222 if (dev->added) 2223 usb_del_gadget(&dev->gadget); 2224 free_irq(dev->irq, dev); 2225 iounmap(dev->base_addr); 2226 device_remove_file(dev->dev, &dev_attr_registers); 2227 2228 dev_info(dev->dev, "unbind\n"); 2229 } 2230 2231 static struct net2272 *net2272_probe_init(struct device *dev, unsigned int irq) 2232 { 2233 struct net2272 *ret; 2234 2235 if (!irq) { 2236 dev_dbg(dev, "No IRQ!\n"); 2237 return ERR_PTR(-ENODEV); 2238 } 2239 2240 /* alloc, and start init */ 2241 ret = kzalloc(sizeof(*ret), GFP_KERNEL); 2242 if (!ret) 2243 return ERR_PTR(-ENOMEM); 2244 2245 spin_lock_init(&ret->lock); 2246 ret->irq = irq; 2247 ret->dev = dev; 2248 ret->gadget.ops = &net2272_ops; 2249 ret->gadget.max_speed = USB_SPEED_HIGH; 2250 2251 /* the "gadget" abstracts/virtualizes the controller */ 2252 ret->gadget.name = driver_name; 2253 usb_initialize_gadget(dev, &ret->gadget, net2272_gadget_release); 2254 2255 return ret; 2256 } 2257 2258 static int 2259 net2272_probe_fin(struct net2272 *dev, unsigned int irqflags) 2260 { 2261 int ret; 2262 2263 /* See if there... */ 2264 if (net2272_present(dev)) { 2265 dev_warn(dev->dev, "2272 not found!\n"); 2266 ret = -ENODEV; 2267 goto err; 2268 } 2269 2270 net2272_usb_reset(dev); 2271 net2272_usb_reinit(dev); 2272 2273 ret = request_irq(dev->irq, net2272_irq, irqflags, driver_name, dev); 2274 if (ret) { 2275 dev_err(dev->dev, "request interrupt %i failed\n", dev->irq); 2276 goto err; 2277 } 2278 2279 dev->chiprev = net2272_read(dev, CHIPREV_2272); 2280 2281 /* done */ 2282 dev_info(dev->dev, "%s\n", driver_desc); 2283 dev_info(dev->dev, "irq %i, mem %p, chip rev %04x, dma %s\n", 2284 dev->irq, dev->base_addr, dev->chiprev, 2285 dma_mode_string()); 2286 dev_info(dev->dev, "version: %s\n", driver_vers); 2287 2288 ret = device_create_file(dev->dev, &dev_attr_registers); 2289 if (ret) 2290 goto err_irq; 2291 2292 ret = usb_add_gadget(&dev->gadget); 2293 if (ret) 2294 goto err_add_udc; 2295 dev->added = 1; 2296 2297 return 0; 2298 2299 err_add_udc: 2300 device_remove_file(dev->dev, &dev_attr_registers); 2301 err_irq: 2302 free_irq(dev->irq, dev); 2303 err: 2304 return ret; 2305 } 2306 2307 #ifdef CONFIG_USB_PCI 2308 2309 /* 2310 * wrap this driver around the specified device, but 2311 * don't respond over USB until a gadget driver binds to us 2312 */ 2313 2314 static int 2315 net2272_rdk1_probe(struct pci_dev *pdev, struct net2272 *dev) 2316 { 2317 unsigned long resource, len, tmp; 2318 void __iomem *mem_mapped_addr[4]; 2319 int ret, i; 2320 2321 /* 2322 * BAR 0 holds PLX 9054 config registers 2323 * BAR 1 is i/o memory; unused here 2324 * BAR 2 holds EPLD config registers 2325 * BAR 3 holds NET2272 registers 2326 */ 2327 2328 /* Find and map all address spaces */ 2329 for (i = 0; i < 4; ++i) { 2330 if (i == 1) 2331 continue; /* BAR1 unused */ 2332 2333 resource = pci_resource_start(pdev, i); 2334 len = pci_resource_len(pdev, i); 2335 2336 if (!request_mem_region(resource, len, driver_name)) { 2337 dev_dbg(dev->dev, "controller already in use\n"); 2338 ret = -EBUSY; 2339 goto err; 2340 } 2341 2342 mem_mapped_addr[i] = ioremap(resource, len); 2343 if (mem_mapped_addr[i] == NULL) { 2344 release_mem_region(resource, len); 2345 dev_dbg(dev->dev, "can't map memory\n"); 2346 ret = -EFAULT; 2347 goto err; 2348 } 2349 } 2350 2351 dev->rdk1.plx9054_base_addr = mem_mapped_addr[0]; 2352 dev->rdk1.epld_base_addr = mem_mapped_addr[2]; 2353 dev->base_addr = mem_mapped_addr[3]; 2354 2355 /* Set PLX 9054 bus width (16 bits) */ 2356 tmp = readl(dev->rdk1.plx9054_base_addr + LBRD1); 2357 writel((tmp & ~(3 << MEMORY_SPACE_LOCAL_BUS_WIDTH)) | W16_BIT, 2358 dev->rdk1.plx9054_base_addr + LBRD1); 2359 2360 /* Enable PLX 9054 Interrupts */ 2361 writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) | 2362 (1 << PCI_INTERRUPT_ENABLE) | 2363 (1 << LOCAL_INTERRUPT_INPUT_ENABLE), 2364 dev->rdk1.plx9054_base_addr + INTCSR); 2365 2366 writeb((1 << CHANNEL_CLEAR_INTERRUPT | (0 << CHANNEL_ENABLE)), 2367 dev->rdk1.plx9054_base_addr + DMACSR0); 2368 2369 /* reset */ 2370 writeb((1 << EPLD_DMA_ENABLE) | 2371 (1 << DMA_CTL_DACK) | 2372 (1 << DMA_TIMEOUT_ENABLE) | 2373 (1 << USER) | 2374 (0 << MPX_MODE) | 2375 (1 << BUSWIDTH) | 2376 (1 << NET2272_RESET), 2377 dev->base_addr + EPLD_IO_CONTROL_REGISTER); 2378 2379 mb(); 2380 writeb(readb(dev->base_addr + EPLD_IO_CONTROL_REGISTER) & 2381 ~(1 << NET2272_RESET), 2382 dev->base_addr + EPLD_IO_CONTROL_REGISTER); 2383 udelay(200); 2384 2385 return 0; 2386 2387 err: 2388 while (--i >= 0) { 2389 if (i == 1) 2390 continue; /* BAR1 unused */ 2391 iounmap(mem_mapped_addr[i]); 2392 release_mem_region(pci_resource_start(pdev, i), 2393 pci_resource_len(pdev, i)); 2394 } 2395 2396 return ret; 2397 } 2398 2399 static int 2400 net2272_rdk2_probe(struct pci_dev *pdev, struct net2272 *dev) 2401 { 2402 unsigned long resource, len; 2403 void __iomem *mem_mapped_addr[2]; 2404 int ret, i; 2405 2406 /* 2407 * BAR 0 holds FGPA config registers 2408 * BAR 1 holds NET2272 registers 2409 */ 2410 2411 /* Find and map all address spaces, bar2-3 unused in rdk 2 */ 2412 for (i = 0; i < 2; ++i) { 2413 resource = pci_resource_start(pdev, i); 2414 len = pci_resource_len(pdev, i); 2415 2416 if (!request_mem_region(resource, len, driver_name)) { 2417 dev_dbg(dev->dev, "controller already in use\n"); 2418 ret = -EBUSY; 2419 goto err; 2420 } 2421 2422 mem_mapped_addr[i] = ioremap(resource, len); 2423 if (mem_mapped_addr[i] == NULL) { 2424 release_mem_region(resource, len); 2425 dev_dbg(dev->dev, "can't map memory\n"); 2426 ret = -EFAULT; 2427 goto err; 2428 } 2429 } 2430 2431 dev->rdk2.fpga_base_addr = mem_mapped_addr[0]; 2432 dev->base_addr = mem_mapped_addr[1]; 2433 2434 mb(); 2435 /* Set 2272 bus width (16 bits) and reset */ 2436 writel((1 << CHIP_RESET), dev->rdk2.fpga_base_addr + RDK2_LOCCTLRDK); 2437 udelay(200); 2438 writel((1 << BUS_WIDTH), dev->rdk2.fpga_base_addr + RDK2_LOCCTLRDK); 2439 /* Print fpga version number */ 2440 dev_info(dev->dev, "RDK2 FPGA version %08x\n", 2441 readl(dev->rdk2.fpga_base_addr + RDK2_FPGAREV)); 2442 /* Enable FPGA Interrupts */ 2443 writel((1 << NET2272_PCI_IRQ), dev->rdk2.fpga_base_addr + RDK2_IRQENB); 2444 2445 return 0; 2446 2447 err: 2448 while (--i >= 0) { 2449 iounmap(mem_mapped_addr[i]); 2450 release_mem_region(pci_resource_start(pdev, i), 2451 pci_resource_len(pdev, i)); 2452 } 2453 2454 return ret; 2455 } 2456 2457 static int 2458 net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) 2459 { 2460 struct net2272 *dev; 2461 int ret; 2462 2463 dev = net2272_probe_init(&pdev->dev, pdev->irq); 2464 if (IS_ERR(dev)) 2465 return PTR_ERR(dev); 2466 dev->dev_id = pdev->device; 2467 2468 if (pci_enable_device(pdev) < 0) { 2469 ret = -ENODEV; 2470 goto err_put; 2471 } 2472 2473 pci_set_master(pdev); 2474 2475 switch (pdev->device) { 2476 case PCI_DEVICE_ID_RDK1: ret = net2272_rdk1_probe(pdev, dev); break; 2477 case PCI_DEVICE_ID_RDK2: ret = net2272_rdk2_probe(pdev, dev); break; 2478 default: BUG(); 2479 } 2480 if (ret) 2481 goto err_pci; 2482 2483 ret = net2272_probe_fin(dev, 0); 2484 if (ret) 2485 goto err_pci; 2486 2487 pci_set_drvdata(pdev, dev); 2488 2489 return 0; 2490 2491 err_pci: 2492 pci_disable_device(pdev); 2493 err_put: 2494 usb_put_gadget(&dev->gadget); 2495 2496 return ret; 2497 } 2498 2499 static void 2500 net2272_rdk1_remove(struct pci_dev *pdev, struct net2272 *dev) 2501 { 2502 int i; 2503 2504 /* disable PLX 9054 interrupts */ 2505 writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) & 2506 ~(1 << PCI_INTERRUPT_ENABLE), 2507 dev->rdk1.plx9054_base_addr + INTCSR); 2508 2509 /* clean up resources allocated during probe() */ 2510 iounmap(dev->rdk1.plx9054_base_addr); 2511 iounmap(dev->rdk1.epld_base_addr); 2512 2513 for (i = 0; i < 4; ++i) { 2514 if (i == 1) 2515 continue; /* BAR1 unused */ 2516 release_mem_region(pci_resource_start(pdev, i), 2517 pci_resource_len(pdev, i)); 2518 } 2519 } 2520 2521 static void 2522 net2272_rdk2_remove(struct pci_dev *pdev, struct net2272 *dev) 2523 { 2524 int i; 2525 2526 /* disable fpga interrupts 2527 writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) & 2528 ~(1 << PCI_INTERRUPT_ENABLE), 2529 dev->rdk1.plx9054_base_addr + INTCSR); 2530 */ 2531 2532 /* clean up resources allocated during probe() */ 2533 iounmap(dev->rdk2.fpga_base_addr); 2534 2535 for (i = 0; i < 2; ++i) 2536 release_mem_region(pci_resource_start(pdev, i), 2537 pci_resource_len(pdev, i)); 2538 } 2539 2540 static void 2541 net2272_pci_remove(struct pci_dev *pdev) 2542 { 2543 struct net2272 *dev = pci_get_drvdata(pdev); 2544 2545 net2272_remove(dev); 2546 2547 switch (pdev->device) { 2548 case PCI_DEVICE_ID_RDK1: net2272_rdk1_remove(pdev, dev); break; 2549 case PCI_DEVICE_ID_RDK2: net2272_rdk2_remove(pdev, dev); break; 2550 default: BUG(); 2551 } 2552 2553 pci_disable_device(pdev); 2554 2555 usb_put_gadget(&dev->gadget); 2556 } 2557 2558 /* Table of matching PCI IDs */ 2559 static struct pci_device_id pci_ids[] = { 2560 { /* RDK 1 card */ 2561 .class = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe), 2562 .class_mask = 0, 2563 .vendor = PCI_VENDOR_ID_PLX, 2564 .device = PCI_DEVICE_ID_RDK1, 2565 .subvendor = PCI_ANY_ID, 2566 .subdevice = PCI_ANY_ID, 2567 }, 2568 { /* RDK 2 card */ 2569 .class = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe), 2570 .class_mask = 0, 2571 .vendor = PCI_VENDOR_ID_PLX, 2572 .device = PCI_DEVICE_ID_RDK2, 2573 .subvendor = PCI_ANY_ID, 2574 .subdevice = PCI_ANY_ID, 2575 }, 2576 { } 2577 }; 2578 MODULE_DEVICE_TABLE(pci, pci_ids); 2579 2580 static struct pci_driver net2272_pci_driver = { 2581 .name = driver_name, 2582 .id_table = pci_ids, 2583 2584 .probe = net2272_pci_probe, 2585 .remove = net2272_pci_remove, 2586 }; 2587 2588 static int net2272_pci_register(void) 2589 { 2590 return pci_register_driver(&net2272_pci_driver); 2591 } 2592 2593 static void net2272_pci_unregister(void) 2594 { 2595 pci_unregister_driver(&net2272_pci_driver); 2596 } 2597 2598 #else 2599 static inline int net2272_pci_register(void) { return 0; } 2600 static inline void net2272_pci_unregister(void) { } 2601 #endif 2602 2603 /*---------------------------------------------------------------------------*/ 2604 2605 static int 2606 net2272_plat_probe(struct platform_device *pdev) 2607 { 2608 struct net2272 *dev; 2609 int ret; 2610 unsigned int irqflags; 2611 resource_size_t base, len; 2612 struct resource *iomem, *iomem_bus, *irq_res; 2613 2614 irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 2615 iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 2616 iomem_bus = platform_get_resource(pdev, IORESOURCE_BUS, 0); 2617 if (!irq_res || !iomem) { 2618 dev_err(&pdev->dev, "must provide irq/base addr"); 2619 return -EINVAL; 2620 } 2621 2622 dev = net2272_probe_init(&pdev->dev, irq_res->start); 2623 if (IS_ERR(dev)) 2624 return PTR_ERR(dev); 2625 2626 irqflags = 0; 2627 if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE) 2628 irqflags |= IRQF_TRIGGER_RISING; 2629 if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE) 2630 irqflags |= IRQF_TRIGGER_FALLING; 2631 if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL) 2632 irqflags |= IRQF_TRIGGER_HIGH; 2633 if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL) 2634 irqflags |= IRQF_TRIGGER_LOW; 2635 2636 base = iomem->start; 2637 len = resource_size(iomem); 2638 if (iomem_bus) 2639 dev->base_shift = iomem_bus->start; 2640 2641 if (!request_mem_region(base, len, driver_name)) { 2642 dev_dbg(dev->dev, "get request memory region!\n"); 2643 ret = -EBUSY; 2644 goto err; 2645 } 2646 dev->base_addr = ioremap(base, len); 2647 if (!dev->base_addr) { 2648 dev_dbg(dev->dev, "can't map memory\n"); 2649 ret = -EFAULT; 2650 goto err_req; 2651 } 2652 2653 ret = net2272_probe_fin(dev, IRQF_TRIGGER_LOW); 2654 if (ret) 2655 goto err_io; 2656 2657 platform_set_drvdata(pdev, dev); 2658 dev_info(&pdev->dev, "running in 16-bit, %sbyte swap local bus mode\n", 2659 (net2272_read(dev, LOCCTL) & (1 << BYTE_SWAP)) ? "" : "no "); 2660 2661 return 0; 2662 2663 err_io: 2664 iounmap(dev->base_addr); 2665 err_req: 2666 release_mem_region(base, len); 2667 err: 2668 usb_put_gadget(&dev->gadget); 2669 2670 return ret; 2671 } 2672 2673 static int 2674 net2272_plat_remove(struct platform_device *pdev) 2675 { 2676 struct net2272 *dev = platform_get_drvdata(pdev); 2677 2678 net2272_remove(dev); 2679 2680 release_mem_region(pdev->resource[0].start, 2681 resource_size(&pdev->resource[0])); 2682 2683 usb_put_gadget(&dev->gadget); 2684 2685 return 0; 2686 } 2687 2688 static struct platform_driver net2272_plat_driver = { 2689 .probe = net2272_plat_probe, 2690 .remove = net2272_plat_remove, 2691 .driver = { 2692 .name = driver_name, 2693 }, 2694 /* FIXME .suspend, .resume */ 2695 }; 2696 MODULE_ALIAS("platform:net2272"); 2697 2698 static int __init net2272_init(void) 2699 { 2700 int ret; 2701 2702 ret = net2272_pci_register(); 2703 if (ret) 2704 return ret; 2705 ret = platform_driver_register(&net2272_plat_driver); 2706 if (ret) 2707 goto err_pci; 2708 return ret; 2709 2710 err_pci: 2711 net2272_pci_unregister(); 2712 return ret; 2713 } 2714 module_init(net2272_init); 2715 2716 static void __exit net2272_cleanup(void) 2717 { 2718 net2272_pci_unregister(); 2719 platform_driver_unregister(&net2272_plat_driver); 2720 } 2721 module_exit(net2272_cleanup); 2722 2723 MODULE_DESCRIPTION(DRIVER_DESC); 2724 MODULE_AUTHOR("PLX Technology, Inc."); 2725 MODULE_LICENSE("GPL"); 2726