xref: /openbmc/linux/drivers/usb/gadget/udc/mv_u3d.h (revision 60772e48)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
4  */
5 
6 #ifndef __MV_U3D_H
7 #define __MV_U3D_H
8 
9 #define MV_U3D_EP_CONTEXT_ALIGNMENT	32
10 #define MV_U3D_TRB_ALIGNMENT	16
11 #define MV_U3D_DMA_BOUNDARY	4096
12 #define MV_U3D_EP0_MAX_PKT_SIZE	512
13 
14 /* ep0 transfer state */
15 #define MV_U3D_WAIT_FOR_SETUP		0
16 #define MV_U3D_DATA_STATE_XMIT		1
17 #define MV_U3D_DATA_STATE_NEED_ZLP	2
18 #define MV_U3D_WAIT_FOR_OUT_STATUS	3
19 #define MV_U3D_DATA_STATE_RECV		4
20 #define MV_U3D_STATUS_STAGE		5
21 
22 #define MV_U3D_EP_MAX_LENGTH_TRANSFER	0x10000
23 
24 /* USB3 Interrupt Status */
25 #define MV_U3D_USBINT_SETUP		0x00000001
26 #define MV_U3D_USBINT_RX_COMPLETE	0x00000002
27 #define MV_U3D_USBINT_TX_COMPLETE	0x00000004
28 #define MV_U3D_USBINT_UNDER_RUN	0x00000008
29 #define MV_U3D_USBINT_RXDESC_ERR	0x00000010
30 #define MV_U3D_USBINT_TXDESC_ERR	0x00000020
31 #define MV_U3D_USBINT_RX_TRB_COMPLETE	0x00000040
32 #define MV_U3D_USBINT_TX_TRB_COMPLETE	0x00000080
33 #define MV_U3D_USBINT_VBUS_VALID	0x00010000
34 #define MV_U3D_USBINT_STORAGE_CMD_FULL	0x00020000
35 #define MV_U3D_USBINT_LINK_CHG		0x01000000
36 
37 /* USB3 Interrupt Enable */
38 #define MV_U3D_INTR_ENABLE_SETUP		0x00000001
39 #define MV_U3D_INTR_ENABLE_RX_COMPLETE		0x00000002
40 #define MV_U3D_INTR_ENABLE_TX_COMPLETE		0x00000004
41 #define MV_U3D_INTR_ENABLE_UNDER_RUN		0x00000008
42 #define MV_U3D_INTR_ENABLE_RXDESC_ERR		0x00000010
43 #define MV_U3D_INTR_ENABLE_TXDESC_ERR		0x00000020
44 #define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE	0x00000040
45 #define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE	0x00000080
46 #define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR	0x00000100
47 #define MV_U3D_INTR_ENABLE_VBUS_VALID		0x00010000
48 #define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL	0x00020000
49 #define MV_U3D_INTR_ENABLE_LINK_CHG		0x01000000
50 #define MV_U3D_INTR_ENABLE_PRIME_STATUS	0x02000000
51 
52 /* USB3 Link Change */
53 #define MV_U3D_LINK_CHANGE_LINK_UP		0x00000001
54 #define MV_U3D_LINK_CHANGE_SUSPEND		0x00000002
55 #define MV_U3D_LINK_CHANGE_RESUME		0x00000004
56 #define MV_U3D_LINK_CHANGE_WRESET		0x00000008
57 #define MV_U3D_LINK_CHANGE_HRESET		0x00000010
58 #define MV_U3D_LINK_CHANGE_VBUS_INVALID	0x00000020
59 #define MV_U3D_LINK_CHANGE_INACT		0x00000040
60 #define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0	0x00000080
61 #define MV_U3D_LINK_CHANGE_U1			0x00000100
62 #define MV_U3D_LINK_CHANGE_U2			0x00000200
63 #define MV_U3D_LINK_CHANGE_U3			0x00000400
64 
65 /* bridge setting */
66 #define MV_U3D_BRIDGE_SETTING_VBUS_VALID	(1 << 16)
67 
68 /* Command Register Bit Masks */
69 #define MV_U3D_CMD_RUN_STOP		0x00000001
70 #define MV_U3D_CMD_CTRL_RESET		0x00000002
71 
72 /* ep control register */
73 #define MV_U3D_EPXCR_EP_TYPE_CONTROL		0
74 #define MV_U3D_EPXCR_EP_TYPE_ISOC		1
75 #define MV_U3D_EPXCR_EP_TYPE_BULK		2
76 #define MV_U3D_EPXCR_EP_TYPE_INT		3
77 #define MV_U3D_EPXCR_EP_ENABLE_SHIFT		4
78 #define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT	12
79 #define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT	16
80 #define MV_U3D_USB_BULK_BURST_OUT		6
81 #define MV_U3D_USB_BULK_BURST_IN		14
82 
83 #define MV_U3D_EPXCR_EP_FLUSH		(1 << 7)
84 #define MV_U3D_EPXCR_EP_HALT		(1 << 1)
85 #define MV_U3D_EPXCR_EP_INIT		(1)
86 
87 /* TX/RX Status Register */
88 #define MV_U3D_XFERSTATUS_COMPLETE_SHIFT	24
89 #define MV_U3D_COMPLETE_INVALID	0
90 #define MV_U3D_COMPLETE_SUCCESS	1
91 #define MV_U3D_COMPLETE_BUFF_ERR	2
92 #define MV_U3D_COMPLETE_SHORT_PACKET	3
93 #define MV_U3D_COMPLETE_TRB_ERR	5
94 #define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK	(0xFFFFFF)
95 
96 #define MV_U3D_USB_LINK_BYPASS_VBUS	0x8
97 
98 #define MV_U3D_LTSSM_PHY_INIT_DONE		0x80000000
99 #define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE	0x40000000
100 
101 #define MV_U3D_USB3_OP_REGS_OFFSET	0x100
102 #define MV_U3D_USB3_PHY_OFFSET		0xB800
103 
104 #define DCS_ENABLE	0x1
105 
106 /* timeout */
107 #define MV_U3D_RESET_TIMEOUT		10000
108 #define MV_U3D_FLUSH_TIMEOUT		100000
109 #define MV_U3D_OWN_TIMEOUT		10000
110 #define LOOPS_USEC_SHIFT	4
111 #define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
112 #define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
113 
114 /* ep direction */
115 #define MV_U3D_EP_DIR_IN		1
116 #define MV_U3D_EP_DIR_OUT		0
117 #define mv_u3d_ep_dir(ep)	(((ep)->ep_num == 0) ? \
118 				((ep)->u3d->ep0_dir) : ((ep)->direction))
119 
120 /* usb capability registers */
121 struct mv_u3d_cap_regs {
122 	u32	rsvd[5];
123 	u32	dboff;	/* doorbell register offset */
124 	u32	rtsoff;	/* runtime register offset */
125 	u32	vuoff;	/* vendor unique register offset */
126 };
127 
128 /* operation registers */
129 struct mv_u3d_op_regs {
130 	u32	usbcmd;		/* Command register */
131 	u32	rsvd1[11];
132 	u32	dcbaapl;	/* Device Context Base Address low register */
133 	u32	dcbaaph;	/* Device Context Base Address high register */
134 	u32	rsvd2[243];
135 	u32	portsc;		/* port status and control register*/
136 	u32	portlinkinfo;	/* port link info register*/
137 	u32	rsvd3[9917];
138 	u32	doorbell;	/* doorbell register */
139 };
140 
141 /* control enpoint enable registers */
142 struct epxcr {
143 	u32	epxoutcr0;	/* ep out control 0 register */
144 	u32	epxoutcr1;	/* ep out control 1 register */
145 	u32	epxincr0;	/* ep in control 0 register */
146 	u32	epxincr1;	/* ep in control 1 register */
147 };
148 
149 /* transfer status registers */
150 struct xferstatus {
151 	u32	curdeqlo;	/* current TRB pointer low */
152 	u32	curdeqhi;	/* current TRB pointer high */
153 	u32	statuslo;	/* transfer status low */
154 	u32	statushi;	/* transfer status high */
155 };
156 
157 /* vendor unique control registers */
158 struct mv_u3d_vuc_regs {
159 	u32	ctrlepenable;	/* control endpoint enable register */
160 	u32	setuplock;	/* setup lock register */
161 	u32	endcomplete;	/* endpoint transfer complete register */
162 	u32	intrcause;	/* interrupt cause register */
163 	u32	intrenable;	/* interrupt enable register */
164 	u32	trbcomplete;	/* TRB complete register */
165 	u32	linkchange;	/* link change register */
166 	u32	rsvd1[5];
167 	u32	trbunderrun;	/* TRB underrun register */
168 	u32	rsvd2[43];
169 	u32	bridgesetting;	/* bridge setting register */
170 	u32	rsvd3[7];
171 	struct xferstatus	txst[16];	/* TX status register */
172 	struct xferstatus	rxst[16];	/* RX status register */
173 	u32	ltssm;		/* LTSSM control register */
174 	u32	pipe;		/* PIPE control register */
175 	u32	linkcr0;	/* link control 0 register */
176 	u32	linkcr1;	/* link control 1 register */
177 	u32	rsvd6[60];
178 	u32	mib0;		/* MIB0 counter register */
179 	u32	usblink;	/* usb link control register */
180 	u32	ltssmstate;	/* LTSSM state register */
181 	u32	linkerrorcause;	/* link error cause register */
182 	u32	rsvd7[60];
183 	u32	devaddrtiebrkr;	/* device address and tie breaker */
184 	u32	itpinfo0;	/* ITP info 0 register */
185 	u32	itpinfo1;	/* ITP info 1 register */
186 	u32	rsvd8[61];
187 	struct epxcr	epcr[16];	/* ep control register */
188 	u32	rsvd9[64];
189 	u32	phyaddr;	/* PHY address register */
190 	u32	phydata;	/* PHY data register */
191 };
192 
193 /* Endpoint context structure */
194 struct mv_u3d_ep_context {
195 	u32	rsvd0;
196 	u32	rsvd1;
197 	u32	trb_addr_lo;		/* TRB address low 32 bit */
198 	u32	trb_addr_hi;		/* TRB address high 32 bit */
199 	u32	rsvd2;
200 	u32	rsvd3;
201 	struct usb_ctrlrequest setup_buffer;	/* setup data buffer */
202 };
203 
204 /* TRB control data structure */
205 struct mv_u3d_trb_ctrl {
206 	u32	own:1;		/* owner of TRB */
207 	u32	rsvd1:3;
208 	u32	chain:1;	/* associate this TRB with the
209 				next TRB on the Ring */
210 	u32	ioc:1;		/* interrupt on complete */
211 	u32	rsvd2:4;
212 	u32	type:6;		/* TRB type */
213 #define TYPE_NORMAL	1
214 #define TYPE_DATA	3
215 #define TYPE_LINK	6
216 	u32	dir:1;		/* Working at data stage of control endpoint
217 				operation. 0 is OUT and 1 is IN. */
218 	u32	rsvd3:15;
219 };
220 
221 /* TRB data structure
222  * For multiple TRB, all the TRBs' physical address should be continuous.
223  */
224 struct mv_u3d_trb_hw {
225 	u32	buf_addr_lo;	/* data buffer address low 32 bit */
226 	u32	buf_addr_hi;	/* data buffer address high 32 bit */
227 	u32	trb_len;	/* transfer length */
228 	struct mv_u3d_trb_ctrl	ctrl;	/* TRB control data */
229 };
230 
231 /* TRB structure */
232 struct mv_u3d_trb {
233 	struct mv_u3d_trb_hw *trb_hw;	/* point to the trb_hw structure */
234 	dma_addr_t trb_dma;		/* dma address for this trb_hw */
235 	struct list_head trb_list;	/* trb list */
236 };
237 
238 /* device data structure */
239 struct mv_u3d {
240 	struct usb_gadget		gadget;
241 	struct usb_gadget_driver	*driver;
242 	spinlock_t			lock;	/* device lock */
243 	struct completion		*done;
244 	struct device			*dev;
245 	int				irq;
246 
247 	/* usb controller registers */
248 	struct mv_u3d_cap_regs __iomem	*cap_regs;
249 	struct mv_u3d_op_regs __iomem	*op_regs;
250 	struct mv_u3d_vuc_regs __iomem	*vuc_regs;
251 	void __iomem			*phy_regs;
252 
253 	unsigned int			max_eps;
254 	struct mv_u3d_ep_context	*ep_context;
255 	size_t				ep_context_size;
256 	dma_addr_t			ep_context_dma;
257 
258 	struct dma_pool			*trb_pool; /* for TRB data structure */
259 	struct mv_u3d_ep		*eps;
260 
261 	struct mv_u3d_req		*status_req; /* ep0 status request */
262 	struct usb_ctrlrequest		local_setup_buff; /* store setup data*/
263 
264 	unsigned int		resume_state;	/* USB state to resume */
265 	unsigned int		usb_state;	/* USB current state */
266 	unsigned int		ep0_state;	/* Endpoint zero state */
267 	unsigned int		ep0_dir;
268 
269 	unsigned int		dev_addr;	/* device address */
270 
271 	unsigned int		errors;
272 
273 	unsigned		softconnect:1;
274 	unsigned		vbus_active:1;	/* vbus is active or not */
275 	unsigned		remote_wakeup:1; /* support remote wakeup */
276 	unsigned		clock_gating:1;	/* clock gating or not */
277 	unsigned		active:1;	/* udc is active or not */
278 	unsigned		vbus_valid_detect:1; /* udc vbus detection */
279 
280 	struct mv_usb_addon_irq *vbus;
281 	unsigned int		power;
282 
283 	struct clk		*clk;
284 };
285 
286 /* endpoint data structure */
287 struct mv_u3d_ep {
288 	struct usb_ep		ep;
289 	struct mv_u3d		*u3d;
290 	struct list_head	queue;	/* ep request queued hardware */
291 	struct list_head	req_list; /* list of ep request */
292 	struct mv_u3d_ep_context	*ep_context; /* ep context */
293 	u32			direction;
294 	char			name[14];
295 	u32			processing; /* there is ep request
296 						queued on haredware */
297 	spinlock_t		req_lock; /* ep lock */
298 	unsigned		wedge:1;
299 	unsigned		enabled:1;
300 	unsigned		ep_type:2;
301 	unsigned		ep_num:8;
302 };
303 
304 /* request data structure */
305 struct mv_u3d_req {
306 	struct usb_request	req;
307 	struct mv_u3d_ep	*ep;
308 	struct list_head	queue;	/* ep requst queued on hardware */
309 	struct list_head	list;	/* ep request list */
310 	struct list_head	trb_list; /* trb list of a request */
311 
312 	struct mv_u3d_trb	*trb_head; /* point to first trb of a request */
313 	unsigned		trb_count; /* TRB number in the chain */
314 	unsigned		chain;	   /* TRB chain or not */
315 };
316 
317 #endif
318