1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * bcm63xx_udc.c -- BCM63xx UDC high/full speed USB device controller
4  *
5  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
6  * Copyright (C) 2012 Broadcom Corporation
7  */
8 
9 #include <linux/bitops.h>
10 #include <linux/bug.h>
11 #include <linux/clk.h>
12 #include <linux/compiler.h>
13 #include <linux/debugfs.h>
14 #include <linux/delay.h>
15 #include <linux/device.h>
16 #include <linux/dma-mapping.h>
17 #include <linux/errno.h>
18 #include <linux/interrupt.h>
19 #include <linux/ioport.h>
20 #include <linux/kernel.h>
21 #include <linux/list.h>
22 #include <linux/module.h>
23 #include <linux/moduleparam.h>
24 #include <linux/platform_device.h>
25 #include <linux/sched.h>
26 #include <linux/seq_file.h>
27 #include <linux/slab.h>
28 #include <linux/timer.h>
29 #include <linux/usb.h>
30 #include <linux/usb/ch9.h>
31 #include <linux/usb/gadget.h>
32 #include <linux/workqueue.h>
33 
34 #include <bcm63xx_cpu.h>
35 #include <bcm63xx_iudma.h>
36 #include <bcm63xx_dev_usb_usbd.h>
37 #include <bcm63xx_io.h>
38 #include <bcm63xx_regs.h>
39 
40 #define DRV_MODULE_NAME		"bcm63xx_udc"
41 
42 static const char bcm63xx_ep0name[] = "ep0";
43 
44 static const struct {
45 	const char *name;
46 	const struct usb_ep_caps caps;
47 } bcm63xx_ep_info[] = {
48 #define EP_INFO(_name, _caps) \
49 	{ \
50 		.name = _name, \
51 		.caps = _caps, \
52 	}
53 
54 	EP_INFO(bcm63xx_ep0name,
55 		USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)),
56 	EP_INFO("ep1in-bulk",
57 		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
58 	EP_INFO("ep2out-bulk",
59 		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
60 	EP_INFO("ep3in-int",
61 		USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
62 	EP_INFO("ep4out-int",
63 		USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_OUT)),
64 
65 #undef EP_INFO
66 };
67 
68 static bool use_fullspeed;
69 module_param(use_fullspeed, bool, S_IRUGO);
70 MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only");
71 
72 /*
73  * RX IRQ coalescing options:
74  *
75  * false (default) - one IRQ per DATAx packet.  Slow but reliable.  The
76  * driver is able to pass the "testusb" suite and recover from conditions like:
77  *
78  *   1) Device queues up a 2048-byte RX IUDMA transaction on an OUT bulk ep
79  *   2) Host sends 512 bytes of data
80  *   3) Host decides to reconfigure the device and sends SET_INTERFACE
81  *   4) Device shuts down the endpoint and cancels the RX transaction
82  *
83  * true - one IRQ per transfer, for transfers <= 2048B.  Generates
84  * considerably fewer IRQs, but error recovery is less robust.  Does not
85  * reliably pass "testusb".
86  *
87  * TX always uses coalescing, because we can cancel partially complete TX
88  * transfers by repeatedly flushing the FIFO.  The hardware doesn't allow
89  * this on RX.
90  */
91 static bool irq_coalesce;
92 module_param(irq_coalesce, bool, S_IRUGO);
93 MODULE_PARM_DESC(irq_coalesce, "take one IRQ per RX transfer");
94 
95 #define BCM63XX_NUM_EP			5
96 #define BCM63XX_NUM_IUDMA		6
97 #define BCM63XX_NUM_FIFO_PAIRS		3
98 
99 #define IUDMA_RESET_TIMEOUT_US		10000
100 
101 #define IUDMA_EP0_RXCHAN		0
102 #define IUDMA_EP0_TXCHAN		1
103 
104 #define IUDMA_MAX_FRAGMENT		2048
105 #define BCM63XX_MAX_CTRL_PKT		64
106 
107 #define BCMEP_CTRL			0x00
108 #define BCMEP_ISOC			0x01
109 #define BCMEP_BULK			0x02
110 #define BCMEP_INTR			0x03
111 
112 #define BCMEP_OUT			0x00
113 #define BCMEP_IN			0x01
114 
115 #define BCM63XX_SPD_FULL		1
116 #define BCM63XX_SPD_HIGH		0
117 
118 #define IUDMA_DMAC_OFFSET		0x200
119 #define IUDMA_DMAS_OFFSET		0x400
120 
121 enum bcm63xx_ep0_state {
122 	EP0_REQUEUE,
123 	EP0_IDLE,
124 	EP0_IN_DATA_PHASE_SETUP,
125 	EP0_IN_DATA_PHASE_COMPLETE,
126 	EP0_OUT_DATA_PHASE_SETUP,
127 	EP0_OUT_DATA_PHASE_COMPLETE,
128 	EP0_OUT_STATUS_PHASE,
129 	EP0_IN_FAKE_STATUS_PHASE,
130 	EP0_SHUTDOWN,
131 };
132 
133 static const char __maybe_unused bcm63xx_ep0_state_names[][32] = {
134 	"REQUEUE",
135 	"IDLE",
136 	"IN_DATA_PHASE_SETUP",
137 	"IN_DATA_PHASE_COMPLETE",
138 	"OUT_DATA_PHASE_SETUP",
139 	"OUT_DATA_PHASE_COMPLETE",
140 	"OUT_STATUS_PHASE",
141 	"IN_FAKE_STATUS_PHASE",
142 	"SHUTDOWN",
143 };
144 
145 /**
146  * struct iudma_ch_cfg - Static configuration for an IUDMA channel.
147  * @ep_num: USB endpoint number.
148  * @n_bds: Number of buffer descriptors in the ring.
149  * @ep_type: Endpoint type (control, bulk, interrupt).
150  * @dir: Direction (in, out).
151  * @n_fifo_slots: Number of FIFO entries to allocate for this channel.
152  * @max_pkt_hs: Maximum packet size in high speed mode.
153  * @max_pkt_fs: Maximum packet size in full speed mode.
154  */
155 struct iudma_ch_cfg {
156 	int				ep_num;
157 	int				n_bds;
158 	int				ep_type;
159 	int				dir;
160 	int				n_fifo_slots;
161 	int				max_pkt_hs;
162 	int				max_pkt_fs;
163 };
164 
165 static const struct iudma_ch_cfg iudma_defaults[] = {
166 
167 	/* This controller was designed to support a CDC/RNDIS application.
168 	   It may be possible to reconfigure some of the endpoints, but
169 	   the hardware limitations (FIFO sizing and number of DMA channels)
170 	   may significantly impact flexibility and/or stability.  Change
171 	   these values at your own risk.
172 
173 	      ep_num       ep_type           n_fifo_slots    max_pkt_fs
174 	idx      |  n_bds     |         dir       |  max_pkt_hs  |
175 	 |       |    |       |          |        |      |       |       */
176 	[0] = { -1,   4, BCMEP_CTRL, BCMEP_OUT,  32,    64,     64 },
177 	[1] = {  0,   4, BCMEP_CTRL, BCMEP_OUT,  32,    64,     64 },
178 	[2] = {  2,  16, BCMEP_BULK, BCMEP_OUT, 128,   512,     64 },
179 	[3] = {  1,  16, BCMEP_BULK, BCMEP_IN,  128,   512,     64 },
180 	[4] = {  4,   4, BCMEP_INTR, BCMEP_OUT,  32,    64,     64 },
181 	[5] = {  3,   4, BCMEP_INTR, BCMEP_IN,   32,    64,     64 },
182 };
183 
184 struct bcm63xx_udc;
185 
186 /**
187  * struct iudma_ch - Represents the current state of a single IUDMA channel.
188  * @ch_idx: IUDMA channel index (0 to BCM63XX_NUM_IUDMA-1).
189  * @ep_num: USB endpoint number.  -1 for ep0 RX.
190  * @enabled: Whether bcm63xx_ep_enable() has been called.
191  * @max_pkt: "Chunk size" on the USB interface.  Based on interface speed.
192  * @is_tx: true for TX, false for RX.
193  * @bep: Pointer to the associated endpoint.  NULL for ep0 RX.
194  * @udc: Reference to the device controller.
195  * @read_bd: Next buffer descriptor to reap from the hardware.
196  * @write_bd: Next BD available for a new packet.
197  * @end_bd: Points to the final BD in the ring.
198  * @n_bds_used: Number of BD entries currently occupied.
199  * @bd_ring: Base pointer to the BD ring.
200  * @bd_ring_dma: Physical (DMA) address of bd_ring.
201  * @n_bds: Total number of BDs in the ring.
202  *
203  * ep0 has two IUDMA channels (IUDMA_EP0_RXCHAN and IUDMA_EP0_TXCHAN), as it is
204  * bidirectional.  The "struct usb_ep" associated with ep0 is for TX (IN)
205  * only.
206  *
207  * Each bulk/intr endpoint has a single IUDMA channel and a single
208  * struct usb_ep.
209  */
210 struct iudma_ch {
211 	unsigned int			ch_idx;
212 	int				ep_num;
213 	bool				enabled;
214 	int				max_pkt;
215 	bool				is_tx;
216 	struct bcm63xx_ep		*bep;
217 	struct bcm63xx_udc		*udc;
218 
219 	struct bcm_enet_desc		*read_bd;
220 	struct bcm_enet_desc		*write_bd;
221 	struct bcm_enet_desc		*end_bd;
222 	int				n_bds_used;
223 
224 	struct bcm_enet_desc		*bd_ring;
225 	dma_addr_t			bd_ring_dma;
226 	unsigned int			n_bds;
227 };
228 
229 /**
230  * struct bcm63xx_ep - Internal (driver) state of a single endpoint.
231  * @ep_num: USB endpoint number.
232  * @iudma: Pointer to IUDMA channel state.
233  * @ep: USB gadget layer representation of the EP.
234  * @udc: Reference to the device controller.
235  * @queue: Linked list of outstanding requests for this EP.
236  * @halted: 1 if the EP is stalled; 0 otherwise.
237  */
238 struct bcm63xx_ep {
239 	unsigned int			ep_num;
240 	struct iudma_ch			*iudma;
241 	struct usb_ep			ep;
242 	struct bcm63xx_udc		*udc;
243 	struct list_head		queue;
244 	unsigned			halted:1;
245 };
246 
247 /**
248  * struct bcm63xx_req - Internal (driver) state of a single request.
249  * @queue: Links back to the EP's request list.
250  * @req: USB gadget layer representation of the request.
251  * @offset: Current byte offset into the data buffer (next byte to queue).
252  * @bd_bytes: Number of data bytes in outstanding BD entries.
253  * @iudma: IUDMA channel used for the request.
254  */
255 struct bcm63xx_req {
256 	struct list_head		queue;		/* ep's requests */
257 	struct usb_request		req;
258 	unsigned int			offset;
259 	unsigned int			bd_bytes;
260 	struct iudma_ch			*iudma;
261 };
262 
263 /**
264  * struct bcm63xx_udc - Driver/hardware private context.
265  * @lock: Spinlock to mediate access to this struct, and (most) HW regs.
266  * @dev: Generic Linux device structure.
267  * @pd: Platform data (board/port info).
268  * @usbd_clk: Clock descriptor for the USB device block.
269  * @usbh_clk: Clock descriptor for the USB host block.
270  * @gadget: USB device.
271  * @driver: Driver for USB device.
272  * @usbd_regs: Base address of the USBD/USB20D block.
273  * @iudma_regs: Base address of the USBD's associated IUDMA block.
274  * @bep: Array of endpoints, including ep0.
275  * @iudma: Array of all IUDMA channels used by this controller.
276  * @cfg: USB configuration number, from SET_CONFIGURATION wValue.
277  * @iface: USB interface number, from SET_INTERFACE wIndex.
278  * @alt_iface: USB alt interface number, from SET_INTERFACE wValue.
279  * @ep0_ctrl_req: Request object for bcm63xx_udc-initiated ep0 transactions.
280  * @ep0_ctrl_buf: Data buffer for ep0_ctrl_req.
281  * @ep0state: Current state of the ep0 state machine.
282  * @ep0_wq: Workqueue struct used to wake up the ep0 state machine.
283  * @wedgemap: Bitmap of wedged endpoints.
284  * @ep0_req_reset: USB reset is pending.
285  * @ep0_req_set_cfg: Need to spoof a SET_CONFIGURATION packet.
286  * @ep0_req_set_iface: Need to spoof a SET_INTERFACE packet.
287  * @ep0_req_shutdown: Driver is shutting down; requesting ep0 to halt activity.
288  * @ep0_req_completed: ep0 request has completed; worker has not seen it yet.
289  * @ep0_reply: Pending reply from gadget driver.
290  * @ep0_request: Outstanding ep0 request.
291  */
292 struct bcm63xx_udc {
293 	spinlock_t			lock;
294 
295 	struct device			*dev;
296 	struct bcm63xx_usbd_platform_data *pd;
297 	struct clk			*usbd_clk;
298 	struct clk			*usbh_clk;
299 
300 	struct usb_gadget		gadget;
301 	struct usb_gadget_driver	*driver;
302 
303 	void __iomem			*usbd_regs;
304 	void __iomem			*iudma_regs;
305 
306 	struct bcm63xx_ep		bep[BCM63XX_NUM_EP];
307 	struct iudma_ch			iudma[BCM63XX_NUM_IUDMA];
308 
309 	int				cfg;
310 	int				iface;
311 	int				alt_iface;
312 
313 	struct bcm63xx_req		ep0_ctrl_req;
314 	u8				*ep0_ctrl_buf;
315 
316 	int				ep0state;
317 	struct work_struct		ep0_wq;
318 
319 	unsigned long			wedgemap;
320 
321 	unsigned			ep0_req_reset:1;
322 	unsigned			ep0_req_set_cfg:1;
323 	unsigned			ep0_req_set_iface:1;
324 	unsigned			ep0_req_shutdown:1;
325 
326 	unsigned			ep0_req_completed:1;
327 	struct usb_request		*ep0_reply;
328 	struct usb_request		*ep0_request;
329 };
330 
331 static const struct usb_ep_ops bcm63xx_udc_ep_ops;
332 
333 /***********************************************************************
334  * Convenience functions
335  ***********************************************************************/
336 
337 static inline struct bcm63xx_udc *gadget_to_udc(struct usb_gadget *g)
338 {
339 	return container_of(g, struct bcm63xx_udc, gadget);
340 }
341 
342 static inline struct bcm63xx_ep *our_ep(struct usb_ep *ep)
343 {
344 	return container_of(ep, struct bcm63xx_ep, ep);
345 }
346 
347 static inline struct bcm63xx_req *our_req(struct usb_request *req)
348 {
349 	return container_of(req, struct bcm63xx_req, req);
350 }
351 
352 static inline u32 usbd_readl(struct bcm63xx_udc *udc, u32 off)
353 {
354 	return bcm_readl(udc->usbd_regs + off);
355 }
356 
357 static inline void usbd_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
358 {
359 	bcm_writel(val, udc->usbd_regs + off);
360 }
361 
362 static inline u32 usb_dma_readl(struct bcm63xx_udc *udc, u32 off)
363 {
364 	return bcm_readl(udc->iudma_regs + off);
365 }
366 
367 static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
368 {
369 	bcm_writel(val, udc->iudma_regs + off);
370 }
371 
372 static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan)
373 {
374 	return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
375 			(ENETDMA_CHAN_WIDTH * chan));
376 }
377 
378 static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
379 					int chan)
380 {
381 	bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
382 			(ENETDMA_CHAN_WIDTH * chan));
383 }
384 
385 static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan)
386 {
387 	return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
388 			(ENETDMA_CHAN_WIDTH * chan));
389 }
390 
391 static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
392 					int chan)
393 {
394 	bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
395 			(ENETDMA_CHAN_WIDTH * chan));
396 }
397 
398 static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled)
399 {
400 	if (is_enabled) {
401 		clk_enable(udc->usbh_clk);
402 		clk_enable(udc->usbd_clk);
403 		udelay(10);
404 	} else {
405 		clk_disable(udc->usbd_clk);
406 		clk_disable(udc->usbh_clk);
407 	}
408 }
409 
410 /***********************************************************************
411  * Low-level IUDMA / FIFO operations
412  ***********************************************************************/
413 
414 /**
415  * bcm63xx_ep_dma_select - Helper function to set up the init_sel signal.
416  * @udc: Reference to the device controller.
417  * @idx: Desired init_sel value.
418  *
419  * The "init_sel" signal is used as a selection index for both endpoints
420  * and IUDMA channels.  Since these do not map 1:1, the use of this signal
421  * depends on the context.
422  */
423 static void bcm63xx_ep_dma_select(struct bcm63xx_udc *udc, int idx)
424 {
425 	u32 val = usbd_readl(udc, USBD_CONTROL_REG);
426 
427 	val &= ~USBD_CONTROL_INIT_SEL_MASK;
428 	val |= idx << USBD_CONTROL_INIT_SEL_SHIFT;
429 	usbd_writel(udc, val, USBD_CONTROL_REG);
430 }
431 
432 /**
433  * bcm63xx_set_stall - Enable/disable stall on one endpoint.
434  * @udc: Reference to the device controller.
435  * @bep: Endpoint on which to operate.
436  * @is_stalled: true to enable stall, false to disable.
437  *
438  * See notes in bcm63xx_update_wedge() regarding automatic clearing of
439  * halt/stall conditions.
440  */
441 static void bcm63xx_set_stall(struct bcm63xx_udc *udc, struct bcm63xx_ep *bep,
442 	bool is_stalled)
443 {
444 	u32 val;
445 
446 	val = USBD_STALL_UPDATE_MASK |
447 		(is_stalled ? USBD_STALL_ENABLE_MASK : 0) |
448 		(bep->ep_num << USBD_STALL_EPNUM_SHIFT);
449 	usbd_writel(udc, val, USBD_STALL_REG);
450 }
451 
452 /**
453  * bcm63xx_fifo_setup - (Re)initialize FIFO boundaries and settings.
454  * @udc: Reference to the device controller.
455  *
456  * These parameters depend on the USB link speed.  Settings are
457  * per-IUDMA-channel-pair.
458  */
459 static void bcm63xx_fifo_setup(struct bcm63xx_udc *udc)
460 {
461 	int is_hs = udc->gadget.speed == USB_SPEED_HIGH;
462 	u32 i, val, rx_fifo_slot, tx_fifo_slot;
463 
464 	/* set up FIFO boundaries and packet sizes; this is done in pairs */
465 	rx_fifo_slot = tx_fifo_slot = 0;
466 	for (i = 0; i < BCM63XX_NUM_IUDMA; i += 2) {
467 		const struct iudma_ch_cfg *rx_cfg = &iudma_defaults[i];
468 		const struct iudma_ch_cfg *tx_cfg = &iudma_defaults[i + 1];
469 
470 		bcm63xx_ep_dma_select(udc, i >> 1);
471 
472 		val = (rx_fifo_slot << USBD_RXFIFO_CONFIG_START_SHIFT) |
473 			((rx_fifo_slot + rx_cfg->n_fifo_slots - 1) <<
474 			 USBD_RXFIFO_CONFIG_END_SHIFT);
475 		rx_fifo_slot += rx_cfg->n_fifo_slots;
476 		usbd_writel(udc, val, USBD_RXFIFO_CONFIG_REG);
477 		usbd_writel(udc,
478 			    is_hs ? rx_cfg->max_pkt_hs : rx_cfg->max_pkt_fs,
479 			    USBD_RXFIFO_EPSIZE_REG);
480 
481 		val = (tx_fifo_slot << USBD_TXFIFO_CONFIG_START_SHIFT) |
482 			((tx_fifo_slot + tx_cfg->n_fifo_slots - 1) <<
483 			 USBD_TXFIFO_CONFIG_END_SHIFT);
484 		tx_fifo_slot += tx_cfg->n_fifo_slots;
485 		usbd_writel(udc, val, USBD_TXFIFO_CONFIG_REG);
486 		usbd_writel(udc,
487 			    is_hs ? tx_cfg->max_pkt_hs : tx_cfg->max_pkt_fs,
488 			    USBD_TXFIFO_EPSIZE_REG);
489 
490 		usbd_readl(udc, USBD_TXFIFO_EPSIZE_REG);
491 	}
492 }
493 
494 /**
495  * bcm63xx_fifo_reset_ep - Flush a single endpoint's FIFO.
496  * @udc: Reference to the device controller.
497  * @ep_num: Endpoint number.
498  */
499 static void bcm63xx_fifo_reset_ep(struct bcm63xx_udc *udc, int ep_num)
500 {
501 	u32 val;
502 
503 	bcm63xx_ep_dma_select(udc, ep_num);
504 
505 	val = usbd_readl(udc, USBD_CONTROL_REG);
506 	val |= USBD_CONTROL_FIFO_RESET_MASK;
507 	usbd_writel(udc, val, USBD_CONTROL_REG);
508 	usbd_readl(udc, USBD_CONTROL_REG);
509 }
510 
511 /**
512  * bcm63xx_fifo_reset - Flush all hardware FIFOs.
513  * @udc: Reference to the device controller.
514  */
515 static void bcm63xx_fifo_reset(struct bcm63xx_udc *udc)
516 {
517 	int i;
518 
519 	for (i = 0; i < BCM63XX_NUM_FIFO_PAIRS; i++)
520 		bcm63xx_fifo_reset_ep(udc, i);
521 }
522 
523 /**
524  * bcm63xx_ep_init - Initial (one-time) endpoint initialization.
525  * @udc: Reference to the device controller.
526  */
527 static void bcm63xx_ep_init(struct bcm63xx_udc *udc)
528 {
529 	u32 i, val;
530 
531 	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
532 		const struct iudma_ch_cfg *cfg = &iudma_defaults[i];
533 
534 		if (cfg->ep_num < 0)
535 			continue;
536 
537 		bcm63xx_ep_dma_select(udc, cfg->ep_num);
538 		val = (cfg->ep_type << USBD_EPNUM_TYPEMAP_TYPE_SHIFT) |
539 			((i >> 1) << USBD_EPNUM_TYPEMAP_DMA_CH_SHIFT);
540 		usbd_writel(udc, val, USBD_EPNUM_TYPEMAP_REG);
541 	}
542 }
543 
544 /**
545  * bcm63xx_ep_setup - Configure per-endpoint settings.
546  * @udc: Reference to the device controller.
547  *
548  * This needs to be rerun if the speed/cfg/intf/altintf changes.
549  */
550 static void bcm63xx_ep_setup(struct bcm63xx_udc *udc)
551 {
552 	u32 val, i;
553 
554 	usbd_writel(udc, USBD_CSR_SETUPADDR_DEF, USBD_CSR_SETUPADDR_REG);
555 
556 	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
557 		const struct iudma_ch_cfg *cfg = &iudma_defaults[i];
558 		int max_pkt = udc->gadget.speed == USB_SPEED_HIGH ?
559 			      cfg->max_pkt_hs : cfg->max_pkt_fs;
560 		int idx = cfg->ep_num;
561 
562 		udc->iudma[i].max_pkt = max_pkt;
563 
564 		if (idx < 0)
565 			continue;
566 		usb_ep_set_maxpacket_limit(&udc->bep[idx].ep, max_pkt);
567 
568 		val = (idx << USBD_CSR_EP_LOG_SHIFT) |
569 		      (cfg->dir << USBD_CSR_EP_DIR_SHIFT) |
570 		      (cfg->ep_type << USBD_CSR_EP_TYPE_SHIFT) |
571 		      (udc->cfg << USBD_CSR_EP_CFG_SHIFT) |
572 		      (udc->iface << USBD_CSR_EP_IFACE_SHIFT) |
573 		      (udc->alt_iface << USBD_CSR_EP_ALTIFACE_SHIFT) |
574 		      (max_pkt << USBD_CSR_EP_MAXPKT_SHIFT);
575 		usbd_writel(udc, val, USBD_CSR_EP_REG(idx));
576 	}
577 }
578 
579 /**
580  * iudma_write - Queue a single IUDMA transaction.
581  * @udc: Reference to the device controller.
582  * @iudma: IUDMA channel to use.
583  * @breq: Request containing the transaction data.
584  *
585  * For RX IUDMA, this will queue a single buffer descriptor, as RX IUDMA
586  * does not honor SOP/EOP so the handling of multiple buffers is ambiguous.
587  * So iudma_write() may be called several times to fulfill a single
588  * usb_request.
589  *
590  * For TX IUDMA, this can queue multiple buffer descriptors if needed.
591  */
592 static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma,
593 	struct bcm63xx_req *breq)
594 {
595 	int first_bd = 1, last_bd = 0, extra_zero_pkt = 0;
596 	unsigned int bytes_left = breq->req.length - breq->offset;
597 	const int max_bd_bytes = !irq_coalesce && !iudma->is_tx ?
598 		iudma->max_pkt : IUDMA_MAX_FRAGMENT;
599 
600 	iudma->n_bds_used = 0;
601 	breq->bd_bytes = 0;
602 	breq->iudma = iudma;
603 
604 	if ((bytes_left % iudma->max_pkt == 0) && bytes_left && breq->req.zero)
605 		extra_zero_pkt = 1;
606 
607 	do {
608 		struct bcm_enet_desc *d = iudma->write_bd;
609 		u32 dmaflags = 0;
610 		unsigned int n_bytes;
611 
612 		if (d == iudma->end_bd) {
613 			dmaflags |= DMADESC_WRAP_MASK;
614 			iudma->write_bd = iudma->bd_ring;
615 		} else {
616 			iudma->write_bd++;
617 		}
618 		iudma->n_bds_used++;
619 
620 		n_bytes = min_t(int, bytes_left, max_bd_bytes);
621 		if (n_bytes)
622 			dmaflags |= n_bytes << DMADESC_LENGTH_SHIFT;
623 		else
624 			dmaflags |= (1 << DMADESC_LENGTH_SHIFT) |
625 				    DMADESC_USB_ZERO_MASK;
626 
627 		dmaflags |= DMADESC_OWNER_MASK;
628 		if (first_bd) {
629 			dmaflags |= DMADESC_SOP_MASK;
630 			first_bd = 0;
631 		}
632 
633 		/*
634 		 * extra_zero_pkt forces one more iteration through the loop
635 		 * after all data is queued up, to send the zero packet
636 		 */
637 		if (extra_zero_pkt && !bytes_left)
638 			extra_zero_pkt = 0;
639 
640 		if (!iudma->is_tx || iudma->n_bds_used == iudma->n_bds ||
641 		    (n_bytes == bytes_left && !extra_zero_pkt)) {
642 			last_bd = 1;
643 			dmaflags |= DMADESC_EOP_MASK;
644 		}
645 
646 		d->address = breq->req.dma + breq->offset;
647 		mb();
648 		d->len_stat = dmaflags;
649 
650 		breq->offset += n_bytes;
651 		breq->bd_bytes += n_bytes;
652 		bytes_left -= n_bytes;
653 	} while (!last_bd);
654 
655 	usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK,
656 			ENETDMAC_CHANCFG_REG, iudma->ch_idx);
657 }
658 
659 /**
660  * iudma_read - Check for IUDMA buffer completion.
661  * @udc: Reference to the device controller.
662  * @iudma: IUDMA channel to use.
663  *
664  * This checks to see if ALL of the outstanding BDs on the DMA channel
665  * have been filled.  If so, it returns the actual transfer length;
666  * otherwise it returns -EBUSY.
667  */
668 static int iudma_read(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
669 {
670 	int i, actual_len = 0;
671 	struct bcm_enet_desc *d = iudma->read_bd;
672 
673 	if (!iudma->n_bds_used)
674 		return -EINVAL;
675 
676 	for (i = 0; i < iudma->n_bds_used; i++) {
677 		u32 dmaflags;
678 
679 		dmaflags = d->len_stat;
680 
681 		if (dmaflags & DMADESC_OWNER_MASK)
682 			return -EBUSY;
683 
684 		actual_len += (dmaflags & DMADESC_LENGTH_MASK) >>
685 			      DMADESC_LENGTH_SHIFT;
686 		if (d == iudma->end_bd)
687 			d = iudma->bd_ring;
688 		else
689 			d++;
690 	}
691 
692 	iudma->read_bd = d;
693 	iudma->n_bds_used = 0;
694 	return actual_len;
695 }
696 
697 /**
698  * iudma_reset_channel - Stop DMA on a single channel.
699  * @udc: Reference to the device controller.
700  * @iudma: IUDMA channel to reset.
701  */
702 static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
703 {
704 	int timeout = IUDMA_RESET_TIMEOUT_US;
705 	struct bcm_enet_desc *d;
706 	int ch_idx = iudma->ch_idx;
707 
708 	if (!iudma->is_tx)
709 		bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num));
710 
711 	/* stop DMA, then wait for the hardware to wrap up */
712 	usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx);
713 
714 	while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) &
715 				   ENETDMAC_CHANCFG_EN_MASK) {
716 		udelay(1);
717 
718 		/* repeatedly flush the FIFO data until the BD completes */
719 		if (iudma->is_tx && iudma->ep_num >= 0)
720 			bcm63xx_fifo_reset_ep(udc, iudma->ep_num);
721 
722 		if (!timeout--) {
723 			dev_err(udc->dev, "can't reset IUDMA channel %d\n",
724 				ch_idx);
725 			break;
726 		}
727 		if (timeout == IUDMA_RESET_TIMEOUT_US / 2) {
728 			dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n",
729 				 ch_idx);
730 			usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK,
731 					ENETDMAC_CHANCFG_REG, ch_idx);
732 		}
733 	}
734 	usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx);
735 
736 	/* don't leave "live" HW-owned entries for the next guy to step on */
737 	for (d = iudma->bd_ring; d <= iudma->end_bd; d++)
738 		d->len_stat = 0;
739 	mb();
740 
741 	iudma->read_bd = iudma->write_bd = iudma->bd_ring;
742 	iudma->n_bds_used = 0;
743 
744 	/* set up IRQs, UBUS burst size, and BD base for this channel */
745 	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
746 			ENETDMAC_IRMASK_REG, ch_idx);
747 	usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx);
748 
749 	usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx);
750 	usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx);
751 }
752 
753 /**
754  * iudma_init_channel - One-time IUDMA channel initialization.
755  * @udc: Reference to the device controller.
756  * @ch_idx: Channel to initialize.
757  */
758 static int iudma_init_channel(struct bcm63xx_udc *udc, unsigned int ch_idx)
759 {
760 	struct iudma_ch *iudma = &udc->iudma[ch_idx];
761 	const struct iudma_ch_cfg *cfg = &iudma_defaults[ch_idx];
762 	unsigned int n_bds = cfg->n_bds;
763 	struct bcm63xx_ep *bep = NULL;
764 
765 	iudma->ep_num = cfg->ep_num;
766 	iudma->ch_idx = ch_idx;
767 	iudma->is_tx = !!(ch_idx & 0x01);
768 	if (iudma->ep_num >= 0) {
769 		bep = &udc->bep[iudma->ep_num];
770 		bep->iudma = iudma;
771 		INIT_LIST_HEAD(&bep->queue);
772 	}
773 
774 	iudma->bep = bep;
775 	iudma->udc = udc;
776 
777 	/* ep0 is always active; others are controlled by the gadget driver */
778 	if (iudma->ep_num <= 0)
779 		iudma->enabled = true;
780 
781 	iudma->n_bds = n_bds;
782 	iudma->bd_ring = dmam_alloc_coherent(udc->dev,
783 		n_bds * sizeof(struct bcm_enet_desc),
784 		&iudma->bd_ring_dma, GFP_KERNEL);
785 	if (!iudma->bd_ring)
786 		return -ENOMEM;
787 	iudma->end_bd = &iudma->bd_ring[n_bds - 1];
788 
789 	return 0;
790 }
791 
792 /**
793  * iudma_init - One-time initialization of all IUDMA channels.
794  * @udc: Reference to the device controller.
795  *
796  * Enable DMA, flush channels, and enable global IUDMA IRQs.
797  */
798 static int iudma_init(struct bcm63xx_udc *udc)
799 {
800 	int i, rc;
801 
802 	usb_dma_writel(udc, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
803 
804 	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
805 		rc = iudma_init_channel(udc, i);
806 		if (rc)
807 			return rc;
808 		iudma_reset_channel(udc, &udc->iudma[i]);
809 	}
810 
811 	usb_dma_writel(udc, BIT(BCM63XX_NUM_IUDMA)-1, ENETDMA_GLB_IRQMASK_REG);
812 	return 0;
813 }
814 
815 /**
816  * iudma_uninit - Uninitialize IUDMA channels.
817  * @udc: Reference to the device controller.
818  *
819  * Kill global IUDMA IRQs, flush channels, and kill DMA.
820  */
821 static void iudma_uninit(struct bcm63xx_udc *udc)
822 {
823 	int i;
824 
825 	usb_dma_writel(udc, 0, ENETDMA_GLB_IRQMASK_REG);
826 
827 	for (i = 0; i < BCM63XX_NUM_IUDMA; i++)
828 		iudma_reset_channel(udc, &udc->iudma[i]);
829 
830 	usb_dma_writel(udc, 0, ENETDMA_CFG_REG);
831 }
832 
833 /***********************************************************************
834  * Other low-level USBD operations
835  ***********************************************************************/
836 
837 /**
838  * bcm63xx_set_ctrl_irqs - Mask/unmask control path interrupts.
839  * @udc: Reference to the device controller.
840  * @enable_irqs: true to enable, false to disable.
841  */
842 static void bcm63xx_set_ctrl_irqs(struct bcm63xx_udc *udc, bool enable_irqs)
843 {
844 	u32 val;
845 
846 	usbd_writel(udc, 0, USBD_STATUS_REG);
847 
848 	val = BIT(USBD_EVENT_IRQ_USB_RESET) |
849 	      BIT(USBD_EVENT_IRQ_SETUP) |
850 	      BIT(USBD_EVENT_IRQ_SETCFG) |
851 	      BIT(USBD_EVENT_IRQ_SETINTF) |
852 	      BIT(USBD_EVENT_IRQ_USB_LINK);
853 	usbd_writel(udc, enable_irqs ? val : 0, USBD_EVENT_IRQ_MASK_REG);
854 	usbd_writel(udc, val, USBD_EVENT_IRQ_STATUS_REG);
855 }
856 
857 /**
858  * bcm63xx_select_phy_mode - Select between USB device and host mode.
859  * @udc: Reference to the device controller.
860  * @is_device: true for device, false for host.
861  *
862  * This should probably be reworked to use the drivers/usb/otg
863  * infrastructure.
864  *
865  * By default, the AFE/pullups are disabled in device mode, until
866  * bcm63xx_select_pullup() is called.
867  */
868 static void bcm63xx_select_phy_mode(struct bcm63xx_udc *udc, bool is_device)
869 {
870 	u32 val, portmask = BIT(udc->pd->port_no);
871 
872 	if (BCMCPU_IS_6328()) {
873 		/* configure pinmux to sense VBUS signal */
874 		val = bcm_gpio_readl(GPIO_PINMUX_OTHR_REG);
875 		val &= ~GPIO_PINMUX_OTHR_6328_USB_MASK;
876 		val |= is_device ? GPIO_PINMUX_OTHR_6328_USB_DEV :
877 			       GPIO_PINMUX_OTHR_6328_USB_HOST;
878 		bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
879 	}
880 
881 	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
882 	if (is_device) {
883 		val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
884 		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
885 	} else {
886 		val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
887 		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
888 	}
889 	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
890 
891 	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
892 	if (is_device)
893 		val |= USBH_PRIV_SWAP_USBD_MASK;
894 	else
895 		val &= ~USBH_PRIV_SWAP_USBD_MASK;
896 	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
897 }
898 
899 /**
900  * bcm63xx_select_pullup - Enable/disable the pullup on D+
901  * @udc: Reference to the device controller.
902  * @is_on: true to enable the pullup, false to disable.
903  *
904  * If the pullup is active, the host will sense a FS/HS device connected to
905  * the port.  If the pullup is inactive, the host will think the USB
906  * device has been disconnected.
907  */
908 static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
909 {
910 	u32 val, portmask = BIT(udc->pd->port_no);
911 
912 	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
913 	if (is_on)
914 		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
915 	else
916 		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
917 	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
918 }
919 
920 /**
921  * bcm63xx_uninit_udc_hw - Shut down the hardware prior to driver removal.
922  * @udc: Reference to the device controller.
923  *
924  * This just masks the IUDMA IRQs and releases the clocks.  It is assumed
925  * that bcm63xx_udc_stop() has already run, and the clocks are stopped.
926  */
927 static void bcm63xx_uninit_udc_hw(struct bcm63xx_udc *udc)
928 {
929 	set_clocks(udc, true);
930 	iudma_uninit(udc);
931 	set_clocks(udc, false);
932 
933 	clk_put(udc->usbd_clk);
934 	clk_put(udc->usbh_clk);
935 }
936 
937 /**
938  * bcm63xx_init_udc_hw - Initialize the controller hardware and data structures.
939  * @udc: Reference to the device controller.
940  */
941 static int bcm63xx_init_udc_hw(struct bcm63xx_udc *udc)
942 {
943 	int i, rc = 0;
944 	u32 val;
945 
946 	udc->ep0_ctrl_buf = devm_kzalloc(udc->dev, BCM63XX_MAX_CTRL_PKT,
947 					 GFP_KERNEL);
948 	if (!udc->ep0_ctrl_buf)
949 		return -ENOMEM;
950 
951 	INIT_LIST_HEAD(&udc->gadget.ep_list);
952 	for (i = 0; i < BCM63XX_NUM_EP; i++) {
953 		struct bcm63xx_ep *bep = &udc->bep[i];
954 
955 		bep->ep.name = bcm63xx_ep_info[i].name;
956 		bep->ep.caps = bcm63xx_ep_info[i].caps;
957 		bep->ep_num = i;
958 		bep->ep.ops = &bcm63xx_udc_ep_ops;
959 		list_add_tail(&bep->ep.ep_list, &udc->gadget.ep_list);
960 		bep->halted = 0;
961 		usb_ep_set_maxpacket_limit(&bep->ep, BCM63XX_MAX_CTRL_PKT);
962 		bep->udc = udc;
963 		bep->ep.desc = NULL;
964 		INIT_LIST_HEAD(&bep->queue);
965 	}
966 
967 	udc->gadget.ep0 = &udc->bep[0].ep;
968 	list_del(&udc->bep[0].ep.ep_list);
969 
970 	udc->gadget.speed = USB_SPEED_UNKNOWN;
971 	udc->ep0state = EP0_SHUTDOWN;
972 
973 	udc->usbh_clk = clk_get(udc->dev, "usbh");
974 	if (IS_ERR(udc->usbh_clk))
975 		return -EIO;
976 
977 	udc->usbd_clk = clk_get(udc->dev, "usbd");
978 	if (IS_ERR(udc->usbd_clk)) {
979 		clk_put(udc->usbh_clk);
980 		return -EIO;
981 	}
982 
983 	set_clocks(udc, true);
984 
985 	val = USBD_CONTROL_AUTO_CSRS_MASK |
986 	      USBD_CONTROL_DONE_CSRS_MASK |
987 	      (irq_coalesce ? USBD_CONTROL_RXZSCFG_MASK : 0);
988 	usbd_writel(udc, val, USBD_CONTROL_REG);
989 
990 	val = USBD_STRAPS_APP_SELF_PWR_MASK |
991 	      USBD_STRAPS_APP_RAM_IF_MASK |
992 	      USBD_STRAPS_APP_CSRPRGSUP_MASK |
993 	      USBD_STRAPS_APP_8BITPHY_MASK |
994 	      USBD_STRAPS_APP_RMTWKUP_MASK;
995 
996 	if (udc->gadget.max_speed == USB_SPEED_HIGH)
997 		val |= (BCM63XX_SPD_HIGH << USBD_STRAPS_SPEED_SHIFT);
998 	else
999 		val |= (BCM63XX_SPD_FULL << USBD_STRAPS_SPEED_SHIFT);
1000 	usbd_writel(udc, val, USBD_STRAPS_REG);
1001 
1002 	bcm63xx_set_ctrl_irqs(udc, false);
1003 
1004 	usbd_writel(udc, 0, USBD_EVENT_IRQ_CFG_LO_REG);
1005 
1006 	val = USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_ENUM_ON) |
1007 	      USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_SET_CSRS);
1008 	usbd_writel(udc, val, USBD_EVENT_IRQ_CFG_HI_REG);
1009 
1010 	rc = iudma_init(udc);
1011 	set_clocks(udc, false);
1012 	if (rc)
1013 		bcm63xx_uninit_udc_hw(udc);
1014 
1015 	return 0;
1016 }
1017 
1018 /***********************************************************************
1019  * Standard EP gadget operations
1020  ***********************************************************************/
1021 
1022 /**
1023  * bcm63xx_ep_enable - Enable one endpoint.
1024  * @ep: Endpoint to enable.
1025  * @desc: Contains max packet, direction, etc.
1026  *
1027  * Most of the endpoint parameters are fixed in this controller, so there
1028  * isn't much for this function to do.
1029  */
1030 static int bcm63xx_ep_enable(struct usb_ep *ep,
1031 	const struct usb_endpoint_descriptor *desc)
1032 {
1033 	struct bcm63xx_ep *bep = our_ep(ep);
1034 	struct bcm63xx_udc *udc = bep->udc;
1035 	struct iudma_ch *iudma = bep->iudma;
1036 	unsigned long flags;
1037 
1038 	if (!ep || !desc || ep->name == bcm63xx_ep0name)
1039 		return -EINVAL;
1040 
1041 	if (!udc->driver)
1042 		return -ESHUTDOWN;
1043 
1044 	spin_lock_irqsave(&udc->lock, flags);
1045 	if (iudma->enabled) {
1046 		spin_unlock_irqrestore(&udc->lock, flags);
1047 		return -EINVAL;
1048 	}
1049 
1050 	iudma->enabled = true;
1051 	BUG_ON(!list_empty(&bep->queue));
1052 
1053 	iudma_reset_channel(udc, iudma);
1054 
1055 	bep->halted = 0;
1056 	bcm63xx_set_stall(udc, bep, false);
1057 	clear_bit(bep->ep_num, &udc->wedgemap);
1058 
1059 	ep->desc = desc;
1060 	ep->maxpacket = usb_endpoint_maxp(desc);
1061 
1062 	spin_unlock_irqrestore(&udc->lock, flags);
1063 	return 0;
1064 }
1065 
1066 /**
1067  * bcm63xx_ep_disable - Disable one endpoint.
1068  * @ep: Endpoint to disable.
1069  */
1070 static int bcm63xx_ep_disable(struct usb_ep *ep)
1071 {
1072 	struct bcm63xx_ep *bep = our_ep(ep);
1073 	struct bcm63xx_udc *udc = bep->udc;
1074 	struct iudma_ch *iudma = bep->iudma;
1075 	struct bcm63xx_req *breq, *n;
1076 	unsigned long flags;
1077 
1078 	if (!ep || !ep->desc)
1079 		return -EINVAL;
1080 
1081 	spin_lock_irqsave(&udc->lock, flags);
1082 	if (!iudma->enabled) {
1083 		spin_unlock_irqrestore(&udc->lock, flags);
1084 		return -EINVAL;
1085 	}
1086 	iudma->enabled = false;
1087 
1088 	iudma_reset_channel(udc, iudma);
1089 
1090 	if (!list_empty(&bep->queue)) {
1091 		list_for_each_entry_safe(breq, n, &bep->queue, queue) {
1092 			usb_gadget_unmap_request(&udc->gadget, &breq->req,
1093 						 iudma->is_tx);
1094 			list_del(&breq->queue);
1095 			breq->req.status = -ESHUTDOWN;
1096 
1097 			spin_unlock_irqrestore(&udc->lock, flags);
1098 			usb_gadget_giveback_request(&iudma->bep->ep, &breq->req);
1099 			spin_lock_irqsave(&udc->lock, flags);
1100 		}
1101 	}
1102 	ep->desc = NULL;
1103 
1104 	spin_unlock_irqrestore(&udc->lock, flags);
1105 	return 0;
1106 }
1107 
1108 /**
1109  * bcm63xx_udc_alloc_request - Allocate a new request.
1110  * @ep: Endpoint associated with the request.
1111  * @mem_flags: Flags to pass to kzalloc().
1112  */
1113 static struct usb_request *bcm63xx_udc_alloc_request(struct usb_ep *ep,
1114 	gfp_t mem_flags)
1115 {
1116 	struct bcm63xx_req *breq;
1117 
1118 	breq = kzalloc(sizeof(*breq), mem_flags);
1119 	if (!breq)
1120 		return NULL;
1121 	return &breq->req;
1122 }
1123 
1124 /**
1125  * bcm63xx_udc_free_request - Free a request.
1126  * @ep: Endpoint associated with the request.
1127  * @req: Request to free.
1128  */
1129 static void bcm63xx_udc_free_request(struct usb_ep *ep,
1130 	struct usb_request *req)
1131 {
1132 	struct bcm63xx_req *breq = our_req(req);
1133 	kfree(breq);
1134 }
1135 
1136 /**
1137  * bcm63xx_udc_queue - Queue up a new request.
1138  * @ep: Endpoint associated with the request.
1139  * @req: Request to add.
1140  * @mem_flags: Unused.
1141  *
1142  * If the queue is empty, start this request immediately.  Otherwise, add
1143  * it to the list.
1144  *
1145  * ep0 replies are sent through this function from the gadget driver, but
1146  * they are treated differently because they need to be handled by the ep0
1147  * state machine.  (Sometimes they are replies to control requests that
1148  * were spoofed by this driver, and so they shouldn't be transmitted at all.)
1149  */
1150 static int bcm63xx_udc_queue(struct usb_ep *ep, struct usb_request *req,
1151 	gfp_t mem_flags)
1152 {
1153 	struct bcm63xx_ep *bep = our_ep(ep);
1154 	struct bcm63xx_udc *udc = bep->udc;
1155 	struct bcm63xx_req *breq = our_req(req);
1156 	unsigned long flags;
1157 	int rc = 0;
1158 
1159 	if (unlikely(!req || !req->complete || !req->buf || !ep))
1160 		return -EINVAL;
1161 
1162 	req->actual = 0;
1163 	req->status = 0;
1164 	breq->offset = 0;
1165 
1166 	if (bep == &udc->bep[0]) {
1167 		/* only one reply per request, please */
1168 		if (udc->ep0_reply)
1169 			return -EINVAL;
1170 
1171 		udc->ep0_reply = req;
1172 		schedule_work(&udc->ep0_wq);
1173 		return 0;
1174 	}
1175 
1176 	spin_lock_irqsave(&udc->lock, flags);
1177 	if (!bep->iudma->enabled) {
1178 		rc = -ESHUTDOWN;
1179 		goto out;
1180 	}
1181 
1182 	rc = usb_gadget_map_request(&udc->gadget, req, bep->iudma->is_tx);
1183 	if (rc == 0) {
1184 		list_add_tail(&breq->queue, &bep->queue);
1185 		if (list_is_singular(&bep->queue))
1186 			iudma_write(udc, bep->iudma, breq);
1187 	}
1188 
1189 out:
1190 	spin_unlock_irqrestore(&udc->lock, flags);
1191 	return rc;
1192 }
1193 
1194 /**
1195  * bcm63xx_udc_dequeue - Remove a pending request from the queue.
1196  * @ep: Endpoint associated with the request.
1197  * @req: Request to remove.
1198  *
1199  * If the request is not at the head of the queue, this is easy - just nuke
1200  * it.  If the request is at the head of the queue, we'll need to stop the
1201  * DMA transaction and then queue up the successor.
1202  */
1203 static int bcm63xx_udc_dequeue(struct usb_ep *ep, struct usb_request *req)
1204 {
1205 	struct bcm63xx_ep *bep = our_ep(ep);
1206 	struct bcm63xx_udc *udc = bep->udc;
1207 	struct bcm63xx_req *breq = our_req(req), *cur;
1208 	unsigned long flags;
1209 	int rc = 0;
1210 
1211 	spin_lock_irqsave(&udc->lock, flags);
1212 	if (list_empty(&bep->queue)) {
1213 		rc = -EINVAL;
1214 		goto out;
1215 	}
1216 
1217 	cur = list_first_entry(&bep->queue, struct bcm63xx_req, queue);
1218 	usb_gadget_unmap_request(&udc->gadget, &breq->req, bep->iudma->is_tx);
1219 
1220 	if (breq == cur) {
1221 		iudma_reset_channel(udc, bep->iudma);
1222 		list_del(&breq->queue);
1223 
1224 		if (!list_empty(&bep->queue)) {
1225 			struct bcm63xx_req *next;
1226 
1227 			next = list_first_entry(&bep->queue,
1228 				struct bcm63xx_req, queue);
1229 			iudma_write(udc, bep->iudma, next);
1230 		}
1231 	} else {
1232 		list_del(&breq->queue);
1233 	}
1234 
1235 out:
1236 	spin_unlock_irqrestore(&udc->lock, flags);
1237 
1238 	req->status = -ESHUTDOWN;
1239 	req->complete(ep, req);
1240 
1241 	return rc;
1242 }
1243 
1244 /**
1245  * bcm63xx_udc_set_halt - Enable/disable STALL flag in the hardware.
1246  * @ep: Endpoint to halt.
1247  * @value: Zero to clear halt; nonzero to set halt.
1248  *
1249  * See comments in bcm63xx_update_wedge().
1250  */
1251 static int bcm63xx_udc_set_halt(struct usb_ep *ep, int value)
1252 {
1253 	struct bcm63xx_ep *bep = our_ep(ep);
1254 	struct bcm63xx_udc *udc = bep->udc;
1255 	unsigned long flags;
1256 
1257 	spin_lock_irqsave(&udc->lock, flags);
1258 	bcm63xx_set_stall(udc, bep, !!value);
1259 	bep->halted = value;
1260 	spin_unlock_irqrestore(&udc->lock, flags);
1261 
1262 	return 0;
1263 }
1264 
1265 /**
1266  * bcm63xx_udc_set_wedge - Stall the endpoint until the next reset.
1267  * @ep: Endpoint to wedge.
1268  *
1269  * See comments in bcm63xx_update_wedge().
1270  */
1271 static int bcm63xx_udc_set_wedge(struct usb_ep *ep)
1272 {
1273 	struct bcm63xx_ep *bep = our_ep(ep);
1274 	struct bcm63xx_udc *udc = bep->udc;
1275 	unsigned long flags;
1276 
1277 	spin_lock_irqsave(&udc->lock, flags);
1278 	set_bit(bep->ep_num, &udc->wedgemap);
1279 	bcm63xx_set_stall(udc, bep, true);
1280 	spin_unlock_irqrestore(&udc->lock, flags);
1281 
1282 	return 0;
1283 }
1284 
1285 static const struct usb_ep_ops bcm63xx_udc_ep_ops = {
1286 	.enable		= bcm63xx_ep_enable,
1287 	.disable	= bcm63xx_ep_disable,
1288 
1289 	.alloc_request	= bcm63xx_udc_alloc_request,
1290 	.free_request	= bcm63xx_udc_free_request,
1291 
1292 	.queue		= bcm63xx_udc_queue,
1293 	.dequeue	= bcm63xx_udc_dequeue,
1294 
1295 	.set_halt	= bcm63xx_udc_set_halt,
1296 	.set_wedge	= bcm63xx_udc_set_wedge,
1297 };
1298 
1299 /***********************************************************************
1300  * EP0 handling
1301  ***********************************************************************/
1302 
1303 /**
1304  * bcm63xx_ep0_setup_callback - Drop spinlock to invoke ->setup callback.
1305  * @udc: Reference to the device controller.
1306  * @ctrl: 8-byte SETUP request.
1307  */
1308 static int bcm63xx_ep0_setup_callback(struct bcm63xx_udc *udc,
1309 	struct usb_ctrlrequest *ctrl)
1310 {
1311 	int rc;
1312 
1313 	spin_unlock_irq(&udc->lock);
1314 	rc = udc->driver->setup(&udc->gadget, ctrl);
1315 	spin_lock_irq(&udc->lock);
1316 	return rc;
1317 }
1318 
1319 /**
1320  * bcm63xx_ep0_spoof_set_cfg - Synthesize a SET_CONFIGURATION request.
1321  * @udc: Reference to the device controller.
1322  *
1323  * Many standard requests are handled automatically in the hardware, but
1324  * we still need to pass them to the gadget driver so that it can
1325  * reconfigure the interfaces/endpoints if necessary.
1326  *
1327  * Unfortunately we are not able to send a STALL response if the host
1328  * requests an invalid configuration.  If this happens, we'll have to be
1329  * content with printing a warning.
1330  */
1331 static int bcm63xx_ep0_spoof_set_cfg(struct bcm63xx_udc *udc)
1332 {
1333 	struct usb_ctrlrequest ctrl;
1334 	int rc;
1335 
1336 	ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_DEVICE;
1337 	ctrl.bRequest = USB_REQ_SET_CONFIGURATION;
1338 	ctrl.wValue = cpu_to_le16(udc->cfg);
1339 	ctrl.wIndex = 0;
1340 	ctrl.wLength = 0;
1341 
1342 	rc = bcm63xx_ep0_setup_callback(udc, &ctrl);
1343 	if (rc < 0) {
1344 		dev_warn_ratelimited(udc->dev,
1345 			"hardware auto-acked bad SET_CONFIGURATION(%d) request\n",
1346 			udc->cfg);
1347 	}
1348 	return rc;
1349 }
1350 
1351 /**
1352  * bcm63xx_ep0_spoof_set_iface - Synthesize a SET_INTERFACE request.
1353  * @udc: Reference to the device controller.
1354  */
1355 static int bcm63xx_ep0_spoof_set_iface(struct bcm63xx_udc *udc)
1356 {
1357 	struct usb_ctrlrequest ctrl;
1358 	int rc;
1359 
1360 	ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_INTERFACE;
1361 	ctrl.bRequest = USB_REQ_SET_INTERFACE;
1362 	ctrl.wValue = cpu_to_le16(udc->alt_iface);
1363 	ctrl.wIndex = cpu_to_le16(udc->iface);
1364 	ctrl.wLength = 0;
1365 
1366 	rc = bcm63xx_ep0_setup_callback(udc, &ctrl);
1367 	if (rc < 0) {
1368 		dev_warn_ratelimited(udc->dev,
1369 			"hardware auto-acked bad SET_INTERFACE(%d,%d) request\n",
1370 			udc->iface, udc->alt_iface);
1371 	}
1372 	return rc;
1373 }
1374 
1375 /**
1376  * bcm63xx_ep0_map_write - dma_map and iudma_write a single request.
1377  * @udc: Reference to the device controller.
1378  * @ch_idx: IUDMA channel number.
1379  * @req: USB gadget layer representation of the request.
1380  */
1381 static void bcm63xx_ep0_map_write(struct bcm63xx_udc *udc, int ch_idx,
1382 	struct usb_request *req)
1383 {
1384 	struct bcm63xx_req *breq = our_req(req);
1385 	struct iudma_ch *iudma = &udc->iudma[ch_idx];
1386 
1387 	BUG_ON(udc->ep0_request);
1388 	udc->ep0_request = req;
1389 
1390 	req->actual = 0;
1391 	breq->offset = 0;
1392 	usb_gadget_map_request(&udc->gadget, req, iudma->is_tx);
1393 	iudma_write(udc, iudma, breq);
1394 }
1395 
1396 /**
1397  * bcm63xx_ep0_complete - Set completion status and "stage" the callback.
1398  * @udc: Reference to the device controller.
1399  * @req: USB gadget layer representation of the request.
1400  * @status: Status to return to the gadget driver.
1401  */
1402 static void bcm63xx_ep0_complete(struct bcm63xx_udc *udc,
1403 	struct usb_request *req, int status)
1404 {
1405 	req->status = status;
1406 	if (status)
1407 		req->actual = 0;
1408 	if (req->complete) {
1409 		spin_unlock_irq(&udc->lock);
1410 		req->complete(&udc->bep[0].ep, req);
1411 		spin_lock_irq(&udc->lock);
1412 	}
1413 }
1414 
1415 /**
1416  * bcm63xx_ep0_nuke_reply - Abort request from the gadget driver due to
1417  *   reset/shutdown.
1418  * @udc: Reference to the device controller.
1419  * @is_tx: Nonzero for TX (IN), zero for RX (OUT).
1420  */
1421 static void bcm63xx_ep0_nuke_reply(struct bcm63xx_udc *udc, int is_tx)
1422 {
1423 	struct usb_request *req = udc->ep0_reply;
1424 
1425 	udc->ep0_reply = NULL;
1426 	usb_gadget_unmap_request(&udc->gadget, req, is_tx);
1427 	if (udc->ep0_request == req) {
1428 		udc->ep0_req_completed = 0;
1429 		udc->ep0_request = NULL;
1430 	}
1431 	bcm63xx_ep0_complete(udc, req, -ESHUTDOWN);
1432 }
1433 
1434 /**
1435  * bcm63xx_ep0_read_complete - Close out the pending ep0 request; return
1436  *   transfer len.
1437  * @udc: Reference to the device controller.
1438  */
1439 static int bcm63xx_ep0_read_complete(struct bcm63xx_udc *udc)
1440 {
1441 	struct usb_request *req = udc->ep0_request;
1442 
1443 	udc->ep0_req_completed = 0;
1444 	udc->ep0_request = NULL;
1445 
1446 	return req->actual;
1447 }
1448 
1449 /**
1450  * bcm63xx_ep0_internal_request - Helper function to submit an ep0 request.
1451  * @udc: Reference to the device controller.
1452  * @ch_idx: IUDMA channel number.
1453  * @length: Number of bytes to TX/RX.
1454  *
1455  * Used for simple transfers performed by the ep0 worker.  This will always
1456  * use ep0_ctrl_req / ep0_ctrl_buf.
1457  */
1458 static void bcm63xx_ep0_internal_request(struct bcm63xx_udc *udc, int ch_idx,
1459 	int length)
1460 {
1461 	struct usb_request *req = &udc->ep0_ctrl_req.req;
1462 
1463 	req->buf = udc->ep0_ctrl_buf;
1464 	req->length = length;
1465 	req->complete = NULL;
1466 
1467 	bcm63xx_ep0_map_write(udc, ch_idx, req);
1468 }
1469 
1470 /**
1471  * bcm63xx_ep0_do_setup - Parse new SETUP packet and decide how to handle it.
1472  * @udc: Reference to the device controller.
1473  *
1474  * EP0_IDLE probably shouldn't ever happen.  EP0_REQUEUE means we're ready
1475  * for the next packet.  Anything else means the transaction requires multiple
1476  * stages of handling.
1477  */
1478 static enum bcm63xx_ep0_state bcm63xx_ep0_do_setup(struct bcm63xx_udc *udc)
1479 {
1480 	int rc;
1481 	struct usb_ctrlrequest *ctrl = (void *)udc->ep0_ctrl_buf;
1482 
1483 	rc = bcm63xx_ep0_read_complete(udc);
1484 
1485 	if (rc < 0) {
1486 		dev_err(udc->dev, "missing SETUP packet\n");
1487 		return EP0_IDLE;
1488 	}
1489 
1490 	/*
1491 	 * Handle 0-byte IN STATUS acknowledgement.  The hardware doesn't
1492 	 * ALWAYS deliver these 100% of the time, so if we happen to see one,
1493 	 * just throw it away.
1494 	 */
1495 	if (rc == 0)
1496 		return EP0_REQUEUE;
1497 
1498 	/* Drop malformed SETUP packets */
1499 	if (rc != sizeof(*ctrl)) {
1500 		dev_warn_ratelimited(udc->dev,
1501 			"malformed SETUP packet (%d bytes)\n", rc);
1502 		return EP0_REQUEUE;
1503 	}
1504 
1505 	/* Process new SETUP packet arriving on ep0 */
1506 	rc = bcm63xx_ep0_setup_callback(udc, ctrl);
1507 	if (rc < 0) {
1508 		bcm63xx_set_stall(udc, &udc->bep[0], true);
1509 		return EP0_REQUEUE;
1510 	}
1511 
1512 	if (!ctrl->wLength)
1513 		return EP0_REQUEUE;
1514 	else if (ctrl->bRequestType & USB_DIR_IN)
1515 		return EP0_IN_DATA_PHASE_SETUP;
1516 	else
1517 		return EP0_OUT_DATA_PHASE_SETUP;
1518 }
1519 
1520 /**
1521  * bcm63xx_ep0_do_idle - Check for outstanding requests if ep0 is idle.
1522  * @udc: Reference to the device controller.
1523  *
1524  * In state EP0_IDLE, the RX descriptor is either pending, or has been
1525  * filled with a SETUP packet from the host.  This function handles new
1526  * SETUP packets, control IRQ events (which can generate fake SETUP packets),
1527  * and reset/shutdown events.
1528  *
1529  * Returns 0 if work was done; -EAGAIN if nothing to do.
1530  */
1531 static int bcm63xx_ep0_do_idle(struct bcm63xx_udc *udc)
1532 {
1533 	if (udc->ep0_req_reset) {
1534 		udc->ep0_req_reset = 0;
1535 	} else if (udc->ep0_req_set_cfg) {
1536 		udc->ep0_req_set_cfg = 0;
1537 		if (bcm63xx_ep0_spoof_set_cfg(udc) >= 0)
1538 			udc->ep0state = EP0_IN_FAKE_STATUS_PHASE;
1539 	} else if (udc->ep0_req_set_iface) {
1540 		udc->ep0_req_set_iface = 0;
1541 		if (bcm63xx_ep0_spoof_set_iface(udc) >= 0)
1542 			udc->ep0state = EP0_IN_FAKE_STATUS_PHASE;
1543 	} else if (udc->ep0_req_completed) {
1544 		udc->ep0state = bcm63xx_ep0_do_setup(udc);
1545 		return udc->ep0state == EP0_IDLE ? -EAGAIN : 0;
1546 	} else if (udc->ep0_req_shutdown) {
1547 		udc->ep0_req_shutdown = 0;
1548 		udc->ep0_req_completed = 0;
1549 		udc->ep0_request = NULL;
1550 		iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]);
1551 		usb_gadget_unmap_request(&udc->gadget,
1552 			&udc->ep0_ctrl_req.req, 0);
1553 
1554 		/* bcm63xx_udc_pullup() is waiting for this */
1555 		mb();
1556 		udc->ep0state = EP0_SHUTDOWN;
1557 	} else if (udc->ep0_reply) {
1558 		/*
1559 		 * This could happen if a USB RESET shows up during an ep0
1560 		 * transaction (especially if a laggy driver like gadgetfs
1561 		 * is in use).
1562 		 */
1563 		dev_warn(udc->dev, "nuking unexpected reply\n");
1564 		bcm63xx_ep0_nuke_reply(udc, 0);
1565 	} else {
1566 		return -EAGAIN;
1567 	}
1568 
1569 	return 0;
1570 }
1571 
1572 /**
1573  * bcm63xx_ep0_one_round - Handle the current ep0 state.
1574  * @udc: Reference to the device controller.
1575  *
1576  * Returns 0 if work was done; -EAGAIN if nothing to do.
1577  */
1578 static int bcm63xx_ep0_one_round(struct bcm63xx_udc *udc)
1579 {
1580 	enum bcm63xx_ep0_state ep0state = udc->ep0state;
1581 	bool shutdown = udc->ep0_req_reset || udc->ep0_req_shutdown;
1582 
1583 	switch (udc->ep0state) {
1584 	case EP0_REQUEUE:
1585 		/* set up descriptor to receive SETUP packet */
1586 		bcm63xx_ep0_internal_request(udc, IUDMA_EP0_RXCHAN,
1587 					     BCM63XX_MAX_CTRL_PKT);
1588 		ep0state = EP0_IDLE;
1589 		break;
1590 	case EP0_IDLE:
1591 		return bcm63xx_ep0_do_idle(udc);
1592 	case EP0_IN_DATA_PHASE_SETUP:
1593 		/*
1594 		 * Normal case: TX request is in ep0_reply (queued by the
1595 		 * callback), or will be queued shortly.  When it's here,
1596 		 * send it to the HW and go to EP0_IN_DATA_PHASE_COMPLETE.
1597 		 *
1598 		 * Shutdown case: Stop waiting for the reply.  Just
1599 		 * REQUEUE->IDLE.  The gadget driver is NOT expected to
1600 		 * queue anything else now.
1601 		 */
1602 		if (udc->ep0_reply) {
1603 			bcm63xx_ep0_map_write(udc, IUDMA_EP0_TXCHAN,
1604 					      udc->ep0_reply);
1605 			ep0state = EP0_IN_DATA_PHASE_COMPLETE;
1606 		} else if (shutdown) {
1607 			ep0state = EP0_REQUEUE;
1608 		}
1609 		break;
1610 	case EP0_IN_DATA_PHASE_COMPLETE: {
1611 		/*
1612 		 * Normal case: TX packet (ep0_reply) is in flight; wait for
1613 		 * it to finish, then go back to REQUEUE->IDLE.
1614 		 *
1615 		 * Shutdown case: Reset the TX channel, send -ESHUTDOWN
1616 		 * completion to the gadget driver, then REQUEUE->IDLE.
1617 		 */
1618 		if (udc->ep0_req_completed) {
1619 			udc->ep0_reply = NULL;
1620 			bcm63xx_ep0_read_complete(udc);
1621 			/*
1622 			 * the "ack" sometimes gets eaten (see
1623 			 * bcm63xx_ep0_do_idle)
1624 			 */
1625 			ep0state = EP0_REQUEUE;
1626 		} else if (shutdown) {
1627 			iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]);
1628 			bcm63xx_ep0_nuke_reply(udc, 1);
1629 			ep0state = EP0_REQUEUE;
1630 		}
1631 		break;
1632 	}
1633 	case EP0_OUT_DATA_PHASE_SETUP:
1634 		/* Similar behavior to EP0_IN_DATA_PHASE_SETUP */
1635 		if (udc->ep0_reply) {
1636 			bcm63xx_ep0_map_write(udc, IUDMA_EP0_RXCHAN,
1637 					      udc->ep0_reply);
1638 			ep0state = EP0_OUT_DATA_PHASE_COMPLETE;
1639 		} else if (shutdown) {
1640 			ep0state = EP0_REQUEUE;
1641 		}
1642 		break;
1643 	case EP0_OUT_DATA_PHASE_COMPLETE: {
1644 		/* Similar behavior to EP0_IN_DATA_PHASE_COMPLETE */
1645 		if (udc->ep0_req_completed) {
1646 			udc->ep0_reply = NULL;
1647 			bcm63xx_ep0_read_complete(udc);
1648 
1649 			/* send 0-byte ack to host */
1650 			bcm63xx_ep0_internal_request(udc, IUDMA_EP0_TXCHAN, 0);
1651 			ep0state = EP0_OUT_STATUS_PHASE;
1652 		} else if (shutdown) {
1653 			iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]);
1654 			bcm63xx_ep0_nuke_reply(udc, 0);
1655 			ep0state = EP0_REQUEUE;
1656 		}
1657 		break;
1658 	}
1659 	case EP0_OUT_STATUS_PHASE:
1660 		/*
1661 		 * Normal case: 0-byte OUT ack packet is in flight; wait
1662 		 * for it to finish, then go back to REQUEUE->IDLE.
1663 		 *
1664 		 * Shutdown case: just cancel the transmission.  Don't bother
1665 		 * calling the completion, because it originated from this
1666 		 * function anyway.  Then go back to REQUEUE->IDLE.
1667 		 */
1668 		if (udc->ep0_req_completed) {
1669 			bcm63xx_ep0_read_complete(udc);
1670 			ep0state = EP0_REQUEUE;
1671 		} else if (shutdown) {
1672 			iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]);
1673 			udc->ep0_request = NULL;
1674 			ep0state = EP0_REQUEUE;
1675 		}
1676 		break;
1677 	case EP0_IN_FAKE_STATUS_PHASE: {
1678 		/*
1679 		 * Normal case: we spoofed a SETUP packet and are now
1680 		 * waiting for the gadget driver to send a 0-byte reply.
1681 		 * This doesn't actually get sent to the HW because the
1682 		 * HW has already sent its own reply.  Once we get the
1683 		 * response, return to IDLE.
1684 		 *
1685 		 * Shutdown case: return to IDLE immediately.
1686 		 *
1687 		 * Note that the ep0 RX descriptor has remained queued
1688 		 * (and possibly unfilled) during this entire transaction.
1689 		 * The HW datapath (IUDMA) never even sees SET_CONFIGURATION
1690 		 * or SET_INTERFACE transactions.
1691 		 */
1692 		struct usb_request *r = udc->ep0_reply;
1693 
1694 		if (!r) {
1695 			if (shutdown)
1696 				ep0state = EP0_IDLE;
1697 			break;
1698 		}
1699 
1700 		bcm63xx_ep0_complete(udc, r, 0);
1701 		udc->ep0_reply = NULL;
1702 		ep0state = EP0_IDLE;
1703 		break;
1704 	}
1705 	case EP0_SHUTDOWN:
1706 		break;
1707 	}
1708 
1709 	if (udc->ep0state == ep0state)
1710 		return -EAGAIN;
1711 
1712 	udc->ep0state = ep0state;
1713 	return 0;
1714 }
1715 
1716 /**
1717  * bcm63xx_ep0_process - ep0 worker thread / state machine.
1718  * @w: Workqueue struct.
1719  *
1720  * bcm63xx_ep0_process is triggered any time an event occurs on ep0.  It
1721  * is used to synchronize ep0 events and ensure that both HW and SW events
1722  * occur in a well-defined order.  When the ep0 IUDMA queues are idle, it may
1723  * synthesize SET_CONFIGURATION / SET_INTERFACE requests that were consumed
1724  * by the USBD hardware.
1725  *
1726  * The worker function will continue iterating around the state machine
1727  * until there is nothing left to do.  Usually "nothing left to do" means
1728  * that we're waiting for a new event from the hardware.
1729  */
1730 static void bcm63xx_ep0_process(struct work_struct *w)
1731 {
1732 	struct bcm63xx_udc *udc = container_of(w, struct bcm63xx_udc, ep0_wq);
1733 	spin_lock_irq(&udc->lock);
1734 	while (bcm63xx_ep0_one_round(udc) == 0)
1735 		;
1736 	spin_unlock_irq(&udc->lock);
1737 }
1738 
1739 /***********************************************************************
1740  * Standard UDC gadget operations
1741  ***********************************************************************/
1742 
1743 /**
1744  * bcm63xx_udc_get_frame - Read current SOF frame number from the HW.
1745  * @gadget: USB device.
1746  */
1747 static int bcm63xx_udc_get_frame(struct usb_gadget *gadget)
1748 {
1749 	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
1750 
1751 	return (usbd_readl(udc, USBD_STATUS_REG) &
1752 		USBD_STATUS_SOF_MASK) >> USBD_STATUS_SOF_SHIFT;
1753 }
1754 
1755 /**
1756  * bcm63xx_udc_pullup - Enable/disable pullup on D+ line.
1757  * @gadget: USB device.
1758  * @is_on: 0 to disable pullup, 1 to enable.
1759  *
1760  * See notes in bcm63xx_select_pullup().
1761  */
1762 static int bcm63xx_udc_pullup(struct usb_gadget *gadget, int is_on)
1763 {
1764 	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
1765 	unsigned long flags;
1766 	int i, rc = -EINVAL;
1767 
1768 	spin_lock_irqsave(&udc->lock, flags);
1769 	if (is_on && udc->ep0state == EP0_SHUTDOWN) {
1770 		udc->gadget.speed = USB_SPEED_UNKNOWN;
1771 		udc->ep0state = EP0_REQUEUE;
1772 		bcm63xx_fifo_setup(udc);
1773 		bcm63xx_fifo_reset(udc);
1774 		bcm63xx_ep_setup(udc);
1775 
1776 		bitmap_zero(&udc->wedgemap, BCM63XX_NUM_EP);
1777 		for (i = 0; i < BCM63XX_NUM_EP; i++)
1778 			bcm63xx_set_stall(udc, &udc->bep[i], false);
1779 
1780 		bcm63xx_set_ctrl_irqs(udc, true);
1781 		bcm63xx_select_pullup(gadget_to_udc(gadget), true);
1782 		rc = 0;
1783 	} else if (!is_on && udc->ep0state != EP0_SHUTDOWN) {
1784 		bcm63xx_select_pullup(gadget_to_udc(gadget), false);
1785 
1786 		udc->ep0_req_shutdown = 1;
1787 		spin_unlock_irqrestore(&udc->lock, flags);
1788 
1789 		while (1) {
1790 			schedule_work(&udc->ep0_wq);
1791 			if (udc->ep0state == EP0_SHUTDOWN)
1792 				break;
1793 			msleep(50);
1794 		}
1795 		bcm63xx_set_ctrl_irqs(udc, false);
1796 		cancel_work_sync(&udc->ep0_wq);
1797 		return 0;
1798 	}
1799 
1800 	spin_unlock_irqrestore(&udc->lock, flags);
1801 	return rc;
1802 }
1803 
1804 /**
1805  * bcm63xx_udc_start - Start the controller.
1806  * @gadget: USB device.
1807  * @driver: Driver for USB device.
1808  */
1809 static int bcm63xx_udc_start(struct usb_gadget *gadget,
1810 		struct usb_gadget_driver *driver)
1811 {
1812 	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
1813 	unsigned long flags;
1814 
1815 	if (!driver || driver->max_speed < USB_SPEED_HIGH ||
1816 	    !driver->setup)
1817 		return -EINVAL;
1818 	if (!udc)
1819 		return -ENODEV;
1820 	if (udc->driver)
1821 		return -EBUSY;
1822 
1823 	spin_lock_irqsave(&udc->lock, flags);
1824 
1825 	set_clocks(udc, true);
1826 	bcm63xx_fifo_setup(udc);
1827 	bcm63xx_ep_init(udc);
1828 	bcm63xx_ep_setup(udc);
1829 	bcm63xx_fifo_reset(udc);
1830 	bcm63xx_select_phy_mode(udc, true);
1831 
1832 	udc->driver = driver;
1833 	udc->gadget.dev.of_node = udc->dev->of_node;
1834 
1835 	spin_unlock_irqrestore(&udc->lock, flags);
1836 
1837 	return 0;
1838 }
1839 
1840 /**
1841  * bcm63xx_udc_stop - Shut down the controller.
1842  * @gadget: USB device.
1843  * @driver: Driver for USB device.
1844  */
1845 static int bcm63xx_udc_stop(struct usb_gadget *gadget)
1846 {
1847 	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
1848 	unsigned long flags;
1849 
1850 	spin_lock_irqsave(&udc->lock, flags);
1851 
1852 	udc->driver = NULL;
1853 
1854 	/*
1855 	 * If we switch the PHY too abruptly after dropping D+, the host
1856 	 * will often complain:
1857 	 *
1858 	 *     hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
1859 	 */
1860 	msleep(100);
1861 
1862 	bcm63xx_select_phy_mode(udc, false);
1863 	set_clocks(udc, false);
1864 
1865 	spin_unlock_irqrestore(&udc->lock, flags);
1866 
1867 	return 0;
1868 }
1869 
1870 static const struct usb_gadget_ops bcm63xx_udc_ops = {
1871 	.get_frame	= bcm63xx_udc_get_frame,
1872 	.pullup		= bcm63xx_udc_pullup,
1873 	.udc_start	= bcm63xx_udc_start,
1874 	.udc_stop	= bcm63xx_udc_stop,
1875 };
1876 
1877 /***********************************************************************
1878  * IRQ handling
1879  ***********************************************************************/
1880 
1881 /**
1882  * bcm63xx_update_cfg_iface - Read current configuration/interface settings.
1883  * @udc: Reference to the device controller.
1884  *
1885  * This controller intercepts SET_CONFIGURATION and SET_INTERFACE messages.
1886  * The driver never sees the raw control packets coming in on the ep0
1887  * IUDMA channel, but at least we get an interrupt event to tell us that
1888  * new values are waiting in the USBD_STATUS register.
1889  */
1890 static void bcm63xx_update_cfg_iface(struct bcm63xx_udc *udc)
1891 {
1892 	u32 reg = usbd_readl(udc, USBD_STATUS_REG);
1893 
1894 	udc->cfg = (reg & USBD_STATUS_CFG_MASK) >> USBD_STATUS_CFG_SHIFT;
1895 	udc->iface = (reg & USBD_STATUS_INTF_MASK) >> USBD_STATUS_INTF_SHIFT;
1896 	udc->alt_iface = (reg & USBD_STATUS_ALTINTF_MASK) >>
1897 			 USBD_STATUS_ALTINTF_SHIFT;
1898 	bcm63xx_ep_setup(udc);
1899 }
1900 
1901 /**
1902  * bcm63xx_update_link_speed - Check to see if the link speed has changed.
1903  * @udc: Reference to the device controller.
1904  *
1905  * The link speed update coincides with a SETUP IRQ.  Returns 1 if the
1906  * speed has changed, so that the caller can update the endpoint settings.
1907  */
1908 static int bcm63xx_update_link_speed(struct bcm63xx_udc *udc)
1909 {
1910 	u32 reg = usbd_readl(udc, USBD_STATUS_REG);
1911 	enum usb_device_speed oldspeed = udc->gadget.speed;
1912 
1913 	switch ((reg & USBD_STATUS_SPD_MASK) >> USBD_STATUS_SPD_SHIFT) {
1914 	case BCM63XX_SPD_HIGH:
1915 		udc->gadget.speed = USB_SPEED_HIGH;
1916 		break;
1917 	case BCM63XX_SPD_FULL:
1918 		udc->gadget.speed = USB_SPEED_FULL;
1919 		break;
1920 	default:
1921 		/* this should never happen */
1922 		udc->gadget.speed = USB_SPEED_UNKNOWN;
1923 		dev_err(udc->dev,
1924 			"received SETUP packet with invalid link speed\n");
1925 		return 0;
1926 	}
1927 
1928 	if (udc->gadget.speed != oldspeed) {
1929 		dev_info(udc->dev, "link up, %s-speed mode\n",
1930 			 udc->gadget.speed == USB_SPEED_HIGH ? "high" : "full");
1931 		return 1;
1932 	} else {
1933 		return 0;
1934 	}
1935 }
1936 
1937 /**
1938  * bcm63xx_update_wedge - Iterate through wedged endpoints.
1939  * @udc: Reference to the device controller.
1940  * @new_status: true to "refresh" wedge status; false to clear it.
1941  *
1942  * On a SETUP interrupt, we need to manually "refresh" the wedge status
1943  * because the controller hardware is designed to automatically clear
1944  * stalls in response to a CLEAR_FEATURE request from the host.
1945  *
1946  * On a RESET interrupt, we do want to restore all wedged endpoints.
1947  */
1948 static void bcm63xx_update_wedge(struct bcm63xx_udc *udc, bool new_status)
1949 {
1950 	int i;
1951 
1952 	for_each_set_bit(i, &udc->wedgemap, BCM63XX_NUM_EP) {
1953 		bcm63xx_set_stall(udc, &udc->bep[i], new_status);
1954 		if (!new_status)
1955 			clear_bit(i, &udc->wedgemap);
1956 	}
1957 }
1958 
1959 /**
1960  * bcm63xx_udc_ctrl_isr - ISR for control path events (USBD).
1961  * @irq: IRQ number (unused).
1962  * @dev_id: Reference to the device controller.
1963  *
1964  * This is where we handle link (VBUS) down, USB reset, speed changes,
1965  * SET_CONFIGURATION, and SET_INTERFACE events.
1966  */
1967 static irqreturn_t bcm63xx_udc_ctrl_isr(int irq, void *dev_id)
1968 {
1969 	struct bcm63xx_udc *udc = dev_id;
1970 	u32 stat;
1971 	bool disconnected = false, bus_reset = false;
1972 
1973 	stat = usbd_readl(udc, USBD_EVENT_IRQ_STATUS_REG) &
1974 	       usbd_readl(udc, USBD_EVENT_IRQ_MASK_REG);
1975 
1976 	usbd_writel(udc, stat, USBD_EVENT_IRQ_STATUS_REG);
1977 
1978 	spin_lock(&udc->lock);
1979 	if (stat & BIT(USBD_EVENT_IRQ_USB_LINK)) {
1980 		/* VBUS toggled */
1981 
1982 		if (!(usbd_readl(udc, USBD_EVENTS_REG) &
1983 		      USBD_EVENTS_USB_LINK_MASK) &&
1984 		      udc->gadget.speed != USB_SPEED_UNKNOWN)
1985 			dev_info(udc->dev, "link down\n");
1986 
1987 		udc->gadget.speed = USB_SPEED_UNKNOWN;
1988 		disconnected = true;
1989 	}
1990 	if (stat & BIT(USBD_EVENT_IRQ_USB_RESET)) {
1991 		bcm63xx_fifo_setup(udc);
1992 		bcm63xx_fifo_reset(udc);
1993 		bcm63xx_ep_setup(udc);
1994 
1995 		bcm63xx_update_wedge(udc, false);
1996 
1997 		udc->ep0_req_reset = 1;
1998 		schedule_work(&udc->ep0_wq);
1999 		bus_reset = true;
2000 	}
2001 	if (stat & BIT(USBD_EVENT_IRQ_SETUP)) {
2002 		if (bcm63xx_update_link_speed(udc)) {
2003 			bcm63xx_fifo_setup(udc);
2004 			bcm63xx_ep_setup(udc);
2005 		}
2006 		bcm63xx_update_wedge(udc, true);
2007 	}
2008 	if (stat & BIT(USBD_EVENT_IRQ_SETCFG)) {
2009 		bcm63xx_update_cfg_iface(udc);
2010 		udc->ep0_req_set_cfg = 1;
2011 		schedule_work(&udc->ep0_wq);
2012 	}
2013 	if (stat & BIT(USBD_EVENT_IRQ_SETINTF)) {
2014 		bcm63xx_update_cfg_iface(udc);
2015 		udc->ep0_req_set_iface = 1;
2016 		schedule_work(&udc->ep0_wq);
2017 	}
2018 	spin_unlock(&udc->lock);
2019 
2020 	if (disconnected && udc->driver)
2021 		udc->driver->disconnect(&udc->gadget);
2022 	else if (bus_reset && udc->driver)
2023 		usb_gadget_udc_reset(&udc->gadget, udc->driver);
2024 
2025 	return IRQ_HANDLED;
2026 }
2027 
2028 /**
2029  * bcm63xx_udc_data_isr - ISR for data path events (IUDMA).
2030  * @irq: IRQ number (unused).
2031  * @dev_id: Reference to the IUDMA channel that generated the interrupt.
2032  *
2033  * For the two ep0 channels, we have special handling that triggers the
2034  * ep0 worker thread.  For normal bulk/intr channels, either queue up
2035  * the next buffer descriptor for the transaction (incomplete transaction),
2036  * or invoke the completion callback (complete transactions).
2037  */
2038 static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id)
2039 {
2040 	struct iudma_ch *iudma = dev_id;
2041 	struct bcm63xx_udc *udc = iudma->udc;
2042 	struct bcm63xx_ep *bep;
2043 	struct usb_request *req = NULL;
2044 	struct bcm63xx_req *breq = NULL;
2045 	int rc;
2046 	bool is_done = false;
2047 
2048 	spin_lock(&udc->lock);
2049 
2050 	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
2051 			ENETDMAC_IR_REG, iudma->ch_idx);
2052 	bep = iudma->bep;
2053 	rc = iudma_read(udc, iudma);
2054 
2055 	/* special handling for EP0 RX (0) and TX (1) */
2056 	if (iudma->ch_idx == IUDMA_EP0_RXCHAN ||
2057 	    iudma->ch_idx == IUDMA_EP0_TXCHAN) {
2058 		req = udc->ep0_request;
2059 		breq = our_req(req);
2060 
2061 		/* a single request could require multiple submissions */
2062 		if (rc >= 0) {
2063 			req->actual += rc;
2064 
2065 			if (req->actual >= req->length || breq->bd_bytes > rc) {
2066 				udc->ep0_req_completed = 1;
2067 				is_done = true;
2068 				schedule_work(&udc->ep0_wq);
2069 
2070 				/* "actual" on a ZLP is 1 byte */
2071 				req->actual = min(req->actual, req->length);
2072 			} else {
2073 				/* queue up the next BD (same request) */
2074 				iudma_write(udc, iudma, breq);
2075 			}
2076 		}
2077 	} else if (!list_empty(&bep->queue)) {
2078 		breq = list_first_entry(&bep->queue, struct bcm63xx_req, queue);
2079 		req = &breq->req;
2080 
2081 		if (rc >= 0) {
2082 			req->actual += rc;
2083 
2084 			if (req->actual >= req->length || breq->bd_bytes > rc) {
2085 				is_done = true;
2086 				list_del(&breq->queue);
2087 
2088 				req->actual = min(req->actual, req->length);
2089 
2090 				if (!list_empty(&bep->queue)) {
2091 					struct bcm63xx_req *next;
2092 
2093 					next = list_first_entry(&bep->queue,
2094 						struct bcm63xx_req, queue);
2095 					iudma_write(udc, iudma, next);
2096 				}
2097 			} else {
2098 				iudma_write(udc, iudma, breq);
2099 			}
2100 		}
2101 	}
2102 	spin_unlock(&udc->lock);
2103 
2104 	if (is_done) {
2105 		usb_gadget_unmap_request(&udc->gadget, req, iudma->is_tx);
2106 		if (req->complete)
2107 			req->complete(&bep->ep, req);
2108 	}
2109 
2110 	return IRQ_HANDLED;
2111 }
2112 
2113 /***********************************************************************
2114  * Debug filesystem
2115  ***********************************************************************/
2116 
2117 /*
2118  * bcm63xx_usbd_dbg_show - Show USBD controller state.
2119  * @s: seq_file to which the information will be written.
2120  * @p: Unused.
2121  *
2122  * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/usbd
2123  */
2124 static int bcm63xx_usbd_dbg_show(struct seq_file *s, void *p)
2125 {
2126 	struct bcm63xx_udc *udc = s->private;
2127 
2128 	if (!udc->driver)
2129 		return -ENODEV;
2130 
2131 	seq_printf(s, "ep0 state: %s\n",
2132 		   bcm63xx_ep0_state_names[udc->ep0state]);
2133 	seq_printf(s, "  pending requests: %s%s%s%s%s%s%s\n",
2134 		   udc->ep0_req_reset ? "reset " : "",
2135 		   udc->ep0_req_set_cfg ? "set_cfg " : "",
2136 		   udc->ep0_req_set_iface ? "set_iface " : "",
2137 		   udc->ep0_req_shutdown ? "shutdown " : "",
2138 		   udc->ep0_request ? "pending " : "",
2139 		   udc->ep0_req_completed ? "completed " : "",
2140 		   udc->ep0_reply ? "reply " : "");
2141 	seq_printf(s, "cfg: %d; iface: %d; alt_iface: %d\n",
2142 		   udc->cfg, udc->iface, udc->alt_iface);
2143 	seq_printf(s, "regs:\n");
2144 	seq_printf(s, "  control: %08x; straps: %08x; status: %08x\n",
2145 		   usbd_readl(udc, USBD_CONTROL_REG),
2146 		   usbd_readl(udc, USBD_STRAPS_REG),
2147 		   usbd_readl(udc, USBD_STATUS_REG));
2148 	seq_printf(s, "  events:  %08x; stall:  %08x\n",
2149 		   usbd_readl(udc, USBD_EVENTS_REG),
2150 		   usbd_readl(udc, USBD_STALL_REG));
2151 
2152 	return 0;
2153 }
2154 DEFINE_SHOW_ATTRIBUTE(bcm63xx_usbd_dbg);
2155 
2156 /*
2157  * bcm63xx_iudma_dbg_show - Show IUDMA status and descriptors.
2158  * @s: seq_file to which the information will be written.
2159  * @p: Unused.
2160  *
2161  * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/iudma
2162  */
2163 static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p)
2164 {
2165 	struct bcm63xx_udc *udc = s->private;
2166 	int ch_idx, i;
2167 	u32 sram2, sram3;
2168 
2169 	if (!udc->driver)
2170 		return -ENODEV;
2171 
2172 	for (ch_idx = 0; ch_idx < BCM63XX_NUM_IUDMA; ch_idx++) {
2173 		struct iudma_ch *iudma = &udc->iudma[ch_idx];
2174 
2175 		seq_printf(s, "IUDMA channel %d -- ", ch_idx);
2176 		switch (iudma_defaults[ch_idx].ep_type) {
2177 		case BCMEP_CTRL:
2178 			seq_printf(s, "control");
2179 			break;
2180 		case BCMEP_BULK:
2181 			seq_printf(s, "bulk");
2182 			break;
2183 		case BCMEP_INTR:
2184 			seq_printf(s, "interrupt");
2185 			break;
2186 		}
2187 		seq_printf(s, ch_idx & 0x01 ? " tx" : " rx");
2188 		seq_printf(s, " [ep%d]:\n",
2189 			   max_t(int, iudma_defaults[ch_idx].ep_num, 0));
2190 		seq_printf(s, "  cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n",
2191 			   usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx),
2192 			   usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx),
2193 			   usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx),
2194 			   usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx));
2195 
2196 		sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx);
2197 		sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx);
2198 		seq_printf(s, "  base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n",
2199 			   usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx),
2200 			   sram2 >> 16, sram2 & 0xffff,
2201 			   sram3 >> 16, sram3 & 0xffff,
2202 			   usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx));
2203 		seq_printf(s, "  desc: %d/%d used", iudma->n_bds_used,
2204 			   iudma->n_bds);
2205 
2206 		if (iudma->bep)
2207 			seq_printf(s, "; %zu queued\n", list_count_nodes(&iudma->bep->queue));
2208 		else
2209 			seq_printf(s, "\n");
2210 
2211 		for (i = 0; i < iudma->n_bds; i++) {
2212 			struct bcm_enet_desc *d = &iudma->bd_ring[i];
2213 
2214 			seq_printf(s, "  %03x (%02x): len_stat: %04x_%04x; pa %08x",
2215 				   i * sizeof(*d), i,
2216 				   d->len_stat >> 16, d->len_stat & 0xffff,
2217 				   d->address);
2218 			if (d == iudma->read_bd)
2219 				seq_printf(s, "   <<RD");
2220 			if (d == iudma->write_bd)
2221 				seq_printf(s, "   <<WR");
2222 			seq_printf(s, "\n");
2223 		}
2224 
2225 		seq_printf(s, "\n");
2226 	}
2227 
2228 	return 0;
2229 }
2230 DEFINE_SHOW_ATTRIBUTE(bcm63xx_iudma_dbg);
2231 
2232 /**
2233  * bcm63xx_udc_init_debugfs - Create debugfs entries.
2234  * @udc: Reference to the device controller.
2235  */
2236 static void bcm63xx_udc_init_debugfs(struct bcm63xx_udc *udc)
2237 {
2238 	struct dentry *root;
2239 
2240 	if (!IS_ENABLED(CONFIG_USB_GADGET_DEBUG_FS))
2241 		return;
2242 
2243 	root = debugfs_create_dir(udc->gadget.name, usb_debug_root);
2244 	debugfs_create_file("usbd", 0400, root, udc, &bcm63xx_usbd_dbg_fops);
2245 	debugfs_create_file("iudma", 0400, root, udc, &bcm63xx_iudma_dbg_fops);
2246 }
2247 
2248 /**
2249  * bcm63xx_udc_cleanup_debugfs - Remove debugfs entries.
2250  * @udc: Reference to the device controller.
2251  *
2252  * debugfs_remove() is safe to call with a NULL argument.
2253  */
2254 static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc)
2255 {
2256 	debugfs_lookup_and_remove(udc->gadget.name, usb_debug_root);
2257 }
2258 
2259 /***********************************************************************
2260  * Driver init/exit
2261  ***********************************************************************/
2262 
2263 /**
2264  * bcm63xx_udc_probe - Initialize a new instance of the UDC.
2265  * @pdev: Platform device struct from the bcm63xx BSP code.
2266  *
2267  * Note that platform data is required, because pd.port_no varies from chip
2268  * to chip and is used to switch the correct USB port to device mode.
2269  */
2270 static int bcm63xx_udc_probe(struct platform_device *pdev)
2271 {
2272 	struct device *dev = &pdev->dev;
2273 	struct bcm63xx_usbd_platform_data *pd = dev_get_platdata(dev);
2274 	struct bcm63xx_udc *udc;
2275 	int rc = -ENOMEM, i, irq;
2276 
2277 	udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
2278 	if (!udc)
2279 		return -ENOMEM;
2280 
2281 	platform_set_drvdata(pdev, udc);
2282 	udc->dev = dev;
2283 	udc->pd = pd;
2284 
2285 	if (!pd) {
2286 		dev_err(dev, "missing platform data\n");
2287 		return -EINVAL;
2288 	}
2289 
2290 	udc->usbd_regs = devm_platform_ioremap_resource(pdev, 0);
2291 	if (IS_ERR(udc->usbd_regs))
2292 		return PTR_ERR(udc->usbd_regs);
2293 
2294 	udc->iudma_regs = devm_platform_ioremap_resource(pdev, 1);
2295 	if (IS_ERR(udc->iudma_regs))
2296 		return PTR_ERR(udc->iudma_regs);
2297 
2298 	spin_lock_init(&udc->lock);
2299 	INIT_WORK(&udc->ep0_wq, bcm63xx_ep0_process);
2300 
2301 	udc->gadget.ops = &bcm63xx_udc_ops;
2302 	udc->gadget.name = dev_name(dev);
2303 
2304 	if (!pd->use_fullspeed && !use_fullspeed)
2305 		udc->gadget.max_speed = USB_SPEED_HIGH;
2306 	else
2307 		udc->gadget.max_speed = USB_SPEED_FULL;
2308 
2309 	/* request clocks, allocate buffers, and clear any pending IRQs */
2310 	rc = bcm63xx_init_udc_hw(udc);
2311 	if (rc)
2312 		return rc;
2313 
2314 	rc = -ENXIO;
2315 
2316 	/* IRQ resource #0: control interrupt (VBUS, speed, etc.) */
2317 	irq = platform_get_irq(pdev, 0);
2318 	if (irq < 0) {
2319 		rc = irq;
2320 		goto out_uninit;
2321 	}
2322 	if (devm_request_irq(dev, irq, &bcm63xx_udc_ctrl_isr, 0,
2323 			     dev_name(dev), udc) < 0)
2324 		goto report_request_failure;
2325 
2326 	/* IRQ resources #1-6: data interrupts for IUDMA channels 0-5 */
2327 	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
2328 		irq = platform_get_irq(pdev, i + 1);
2329 		if (irq < 0) {
2330 			rc = irq;
2331 			goto out_uninit;
2332 		}
2333 		if (devm_request_irq(dev, irq, &bcm63xx_udc_data_isr, 0,
2334 				     dev_name(dev), &udc->iudma[i]) < 0)
2335 			goto report_request_failure;
2336 	}
2337 
2338 	bcm63xx_udc_init_debugfs(udc);
2339 	rc = usb_add_gadget_udc(dev, &udc->gadget);
2340 	if (!rc)
2341 		return 0;
2342 
2343 	bcm63xx_udc_cleanup_debugfs(udc);
2344 out_uninit:
2345 	bcm63xx_uninit_udc_hw(udc);
2346 	return rc;
2347 
2348 report_request_failure:
2349 	dev_err(dev, "error requesting IRQ #%d\n", irq);
2350 	goto out_uninit;
2351 }
2352 
2353 /**
2354  * bcm63xx_udc_remove - Remove the device from the system.
2355  * @pdev: Platform device struct from the bcm63xx BSP code.
2356  */
2357 static void bcm63xx_udc_remove(struct platform_device *pdev)
2358 {
2359 	struct bcm63xx_udc *udc = platform_get_drvdata(pdev);
2360 
2361 	bcm63xx_udc_cleanup_debugfs(udc);
2362 	usb_del_gadget_udc(&udc->gadget);
2363 	BUG_ON(udc->driver);
2364 
2365 	bcm63xx_uninit_udc_hw(udc);
2366 }
2367 
2368 static struct platform_driver bcm63xx_udc_driver = {
2369 	.probe		= bcm63xx_udc_probe,
2370 	.remove_new	= bcm63xx_udc_remove,
2371 	.driver		= {
2372 		.name	= DRV_MODULE_NAME,
2373 	},
2374 };
2375 module_platform_driver(bcm63xx_udc_driver);
2376 
2377 MODULE_DESCRIPTION("BCM63xx USB Peripheral Controller");
2378 MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>");
2379 MODULE_LICENSE("GPL");
2380 MODULE_ALIAS("platform:" DRV_MODULE_NAME);
2381