1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * bcm63xx_udc.c -- BCM63xx UDC high/full speed USB device controller 4 * 5 * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com> 6 * Copyright (C) 2012 Broadcom Corporation 7 */ 8 9 #include <linux/bitops.h> 10 #include <linux/bug.h> 11 #include <linux/clk.h> 12 #include <linux/compiler.h> 13 #include <linux/debugfs.h> 14 #include <linux/delay.h> 15 #include <linux/device.h> 16 #include <linux/dma-mapping.h> 17 #include <linux/errno.h> 18 #include <linux/interrupt.h> 19 #include <linux/ioport.h> 20 #include <linux/kernel.h> 21 #include <linux/list.h> 22 #include <linux/module.h> 23 #include <linux/moduleparam.h> 24 #include <linux/platform_device.h> 25 #include <linux/sched.h> 26 #include <linux/seq_file.h> 27 #include <linux/slab.h> 28 #include <linux/timer.h> 29 #include <linux/usb/ch9.h> 30 #include <linux/usb/gadget.h> 31 #include <linux/workqueue.h> 32 33 #include <bcm63xx_cpu.h> 34 #include <bcm63xx_iudma.h> 35 #include <bcm63xx_dev_usb_usbd.h> 36 #include <bcm63xx_io.h> 37 #include <bcm63xx_regs.h> 38 39 #define DRV_MODULE_NAME "bcm63xx_udc" 40 41 static const char bcm63xx_ep0name[] = "ep0"; 42 43 static const struct { 44 const char *name; 45 const struct usb_ep_caps caps; 46 } bcm63xx_ep_info[] = { 47 #define EP_INFO(_name, _caps) \ 48 { \ 49 .name = _name, \ 50 .caps = _caps, \ 51 } 52 53 EP_INFO(bcm63xx_ep0name, 54 USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)), 55 EP_INFO("ep1in-bulk", 56 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), 57 EP_INFO("ep2out-bulk", 58 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), 59 EP_INFO("ep3in-int", 60 USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), 61 EP_INFO("ep4out-int", 62 USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_OUT)), 63 64 #undef EP_INFO 65 }; 66 67 static bool use_fullspeed; 68 module_param(use_fullspeed, bool, S_IRUGO); 69 MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only"); 70 71 /* 72 * RX IRQ coalescing options: 73 * 74 * false (default) - one IRQ per DATAx packet. Slow but reliable. The 75 * driver is able to pass the "testusb" suite and recover from conditions like: 76 * 77 * 1) Device queues up a 2048-byte RX IUDMA transaction on an OUT bulk ep 78 * 2) Host sends 512 bytes of data 79 * 3) Host decides to reconfigure the device and sends SET_INTERFACE 80 * 4) Device shuts down the endpoint and cancels the RX transaction 81 * 82 * true - one IRQ per transfer, for transfers <= 2048B. Generates 83 * considerably fewer IRQs, but error recovery is less robust. Does not 84 * reliably pass "testusb". 85 * 86 * TX always uses coalescing, because we can cancel partially complete TX 87 * transfers by repeatedly flushing the FIFO. The hardware doesn't allow 88 * this on RX. 89 */ 90 static bool irq_coalesce; 91 module_param(irq_coalesce, bool, S_IRUGO); 92 MODULE_PARM_DESC(irq_coalesce, "take one IRQ per RX transfer"); 93 94 #define BCM63XX_NUM_EP 5 95 #define BCM63XX_NUM_IUDMA 6 96 #define BCM63XX_NUM_FIFO_PAIRS 3 97 98 #define IUDMA_RESET_TIMEOUT_US 10000 99 100 #define IUDMA_EP0_RXCHAN 0 101 #define IUDMA_EP0_TXCHAN 1 102 103 #define IUDMA_MAX_FRAGMENT 2048 104 #define BCM63XX_MAX_CTRL_PKT 64 105 106 #define BCMEP_CTRL 0x00 107 #define BCMEP_ISOC 0x01 108 #define BCMEP_BULK 0x02 109 #define BCMEP_INTR 0x03 110 111 #define BCMEP_OUT 0x00 112 #define BCMEP_IN 0x01 113 114 #define BCM63XX_SPD_FULL 1 115 #define BCM63XX_SPD_HIGH 0 116 117 #define IUDMA_DMAC_OFFSET 0x200 118 #define IUDMA_DMAS_OFFSET 0x400 119 120 enum bcm63xx_ep0_state { 121 EP0_REQUEUE, 122 EP0_IDLE, 123 EP0_IN_DATA_PHASE_SETUP, 124 EP0_IN_DATA_PHASE_COMPLETE, 125 EP0_OUT_DATA_PHASE_SETUP, 126 EP0_OUT_DATA_PHASE_COMPLETE, 127 EP0_OUT_STATUS_PHASE, 128 EP0_IN_FAKE_STATUS_PHASE, 129 EP0_SHUTDOWN, 130 }; 131 132 static const char __maybe_unused bcm63xx_ep0_state_names[][32] = { 133 "REQUEUE", 134 "IDLE", 135 "IN_DATA_PHASE_SETUP", 136 "IN_DATA_PHASE_COMPLETE", 137 "OUT_DATA_PHASE_SETUP", 138 "OUT_DATA_PHASE_COMPLETE", 139 "OUT_STATUS_PHASE", 140 "IN_FAKE_STATUS_PHASE", 141 "SHUTDOWN", 142 }; 143 144 /** 145 * struct iudma_ch_cfg - Static configuration for an IUDMA channel. 146 * @ep_num: USB endpoint number. 147 * @n_bds: Number of buffer descriptors in the ring. 148 * @ep_type: Endpoint type (control, bulk, interrupt). 149 * @dir: Direction (in, out). 150 * @n_fifo_slots: Number of FIFO entries to allocate for this channel. 151 * @max_pkt_hs: Maximum packet size in high speed mode. 152 * @max_pkt_fs: Maximum packet size in full speed mode. 153 */ 154 struct iudma_ch_cfg { 155 int ep_num; 156 int n_bds; 157 int ep_type; 158 int dir; 159 int n_fifo_slots; 160 int max_pkt_hs; 161 int max_pkt_fs; 162 }; 163 164 static const struct iudma_ch_cfg iudma_defaults[] = { 165 166 /* This controller was designed to support a CDC/RNDIS application. 167 It may be possible to reconfigure some of the endpoints, but 168 the hardware limitations (FIFO sizing and number of DMA channels) 169 may significantly impact flexibility and/or stability. Change 170 these values at your own risk. 171 172 ep_num ep_type n_fifo_slots max_pkt_fs 173 idx | n_bds | dir | max_pkt_hs | 174 | | | | | | | | */ 175 [0] = { -1, 4, BCMEP_CTRL, BCMEP_OUT, 32, 64, 64 }, 176 [1] = { 0, 4, BCMEP_CTRL, BCMEP_OUT, 32, 64, 64 }, 177 [2] = { 2, 16, BCMEP_BULK, BCMEP_OUT, 128, 512, 64 }, 178 [3] = { 1, 16, BCMEP_BULK, BCMEP_IN, 128, 512, 64 }, 179 [4] = { 4, 4, BCMEP_INTR, BCMEP_OUT, 32, 64, 64 }, 180 [5] = { 3, 4, BCMEP_INTR, BCMEP_IN, 32, 64, 64 }, 181 }; 182 183 struct bcm63xx_udc; 184 185 /** 186 * struct iudma_ch - Represents the current state of a single IUDMA channel. 187 * @ch_idx: IUDMA channel index (0 to BCM63XX_NUM_IUDMA-1). 188 * @ep_num: USB endpoint number. -1 for ep0 RX. 189 * @enabled: Whether bcm63xx_ep_enable() has been called. 190 * @max_pkt: "Chunk size" on the USB interface. Based on interface speed. 191 * @is_tx: true for TX, false for RX. 192 * @bep: Pointer to the associated endpoint. NULL for ep0 RX. 193 * @udc: Reference to the device controller. 194 * @read_bd: Next buffer descriptor to reap from the hardware. 195 * @write_bd: Next BD available for a new packet. 196 * @end_bd: Points to the final BD in the ring. 197 * @n_bds_used: Number of BD entries currently occupied. 198 * @bd_ring: Base pointer to the BD ring. 199 * @bd_ring_dma: Physical (DMA) address of bd_ring. 200 * @n_bds: Total number of BDs in the ring. 201 * 202 * ep0 has two IUDMA channels (IUDMA_EP0_RXCHAN and IUDMA_EP0_TXCHAN), as it is 203 * bidirectional. The "struct usb_ep" associated with ep0 is for TX (IN) 204 * only. 205 * 206 * Each bulk/intr endpoint has a single IUDMA channel and a single 207 * struct usb_ep. 208 */ 209 struct iudma_ch { 210 unsigned int ch_idx; 211 int ep_num; 212 bool enabled; 213 int max_pkt; 214 bool is_tx; 215 struct bcm63xx_ep *bep; 216 struct bcm63xx_udc *udc; 217 218 struct bcm_enet_desc *read_bd; 219 struct bcm_enet_desc *write_bd; 220 struct bcm_enet_desc *end_bd; 221 int n_bds_used; 222 223 struct bcm_enet_desc *bd_ring; 224 dma_addr_t bd_ring_dma; 225 unsigned int n_bds; 226 }; 227 228 /** 229 * struct bcm63xx_ep - Internal (driver) state of a single endpoint. 230 * @ep_num: USB endpoint number. 231 * @iudma: Pointer to IUDMA channel state. 232 * @ep: USB gadget layer representation of the EP. 233 * @udc: Reference to the device controller. 234 * @queue: Linked list of outstanding requests for this EP. 235 * @halted: 1 if the EP is stalled; 0 otherwise. 236 */ 237 struct bcm63xx_ep { 238 unsigned int ep_num; 239 struct iudma_ch *iudma; 240 struct usb_ep ep; 241 struct bcm63xx_udc *udc; 242 struct list_head queue; 243 unsigned halted:1; 244 }; 245 246 /** 247 * struct bcm63xx_req - Internal (driver) state of a single request. 248 * @queue: Links back to the EP's request list. 249 * @req: USB gadget layer representation of the request. 250 * @offset: Current byte offset into the data buffer (next byte to queue). 251 * @bd_bytes: Number of data bytes in outstanding BD entries. 252 * @iudma: IUDMA channel used for the request. 253 */ 254 struct bcm63xx_req { 255 struct list_head queue; /* ep's requests */ 256 struct usb_request req; 257 unsigned int offset; 258 unsigned int bd_bytes; 259 struct iudma_ch *iudma; 260 }; 261 262 /** 263 * struct bcm63xx_udc - Driver/hardware private context. 264 * @lock: Spinlock to mediate access to this struct, and (most) HW regs. 265 * @dev: Generic Linux device structure. 266 * @pd: Platform data (board/port info). 267 * @usbd_clk: Clock descriptor for the USB device block. 268 * @usbh_clk: Clock descriptor for the USB host block. 269 * @gadget: USB device. 270 * @driver: Driver for USB device. 271 * @usbd_regs: Base address of the USBD/USB20D block. 272 * @iudma_regs: Base address of the USBD's associated IUDMA block. 273 * @bep: Array of endpoints, including ep0. 274 * @iudma: Array of all IUDMA channels used by this controller. 275 * @cfg: USB configuration number, from SET_CONFIGURATION wValue. 276 * @iface: USB interface number, from SET_INTERFACE wIndex. 277 * @alt_iface: USB alt interface number, from SET_INTERFACE wValue. 278 * @ep0_ctrl_req: Request object for bcm63xx_udc-initiated ep0 transactions. 279 * @ep0_ctrl_buf: Data buffer for ep0_ctrl_req. 280 * @ep0state: Current state of the ep0 state machine. 281 * @ep0_wq: Workqueue struct used to wake up the ep0 state machine. 282 * @wedgemap: Bitmap of wedged endpoints. 283 * @ep0_req_reset: USB reset is pending. 284 * @ep0_req_set_cfg: Need to spoof a SET_CONFIGURATION packet. 285 * @ep0_req_set_iface: Need to spoof a SET_INTERFACE packet. 286 * @ep0_req_shutdown: Driver is shutting down; requesting ep0 to halt activity. 287 * @ep0_req_completed: ep0 request has completed; worker has not seen it yet. 288 * @ep0_reply: Pending reply from gadget driver. 289 * @ep0_request: Outstanding ep0 request. 290 * @debugfs_root: debugfs directory: /sys/kernel/debug/<DRV_MODULE_NAME>. 291 */ 292 struct bcm63xx_udc { 293 spinlock_t lock; 294 295 struct device *dev; 296 struct bcm63xx_usbd_platform_data *pd; 297 struct clk *usbd_clk; 298 struct clk *usbh_clk; 299 300 struct usb_gadget gadget; 301 struct usb_gadget_driver *driver; 302 303 void __iomem *usbd_regs; 304 void __iomem *iudma_regs; 305 306 struct bcm63xx_ep bep[BCM63XX_NUM_EP]; 307 struct iudma_ch iudma[BCM63XX_NUM_IUDMA]; 308 309 int cfg; 310 int iface; 311 int alt_iface; 312 313 struct bcm63xx_req ep0_ctrl_req; 314 u8 *ep0_ctrl_buf; 315 316 int ep0state; 317 struct work_struct ep0_wq; 318 319 unsigned long wedgemap; 320 321 unsigned ep0_req_reset:1; 322 unsigned ep0_req_set_cfg:1; 323 unsigned ep0_req_set_iface:1; 324 unsigned ep0_req_shutdown:1; 325 326 unsigned ep0_req_completed:1; 327 struct usb_request *ep0_reply; 328 struct usb_request *ep0_request; 329 330 struct dentry *debugfs_root; 331 }; 332 333 static const struct usb_ep_ops bcm63xx_udc_ep_ops; 334 335 /*********************************************************************** 336 * Convenience functions 337 ***********************************************************************/ 338 339 static inline struct bcm63xx_udc *gadget_to_udc(struct usb_gadget *g) 340 { 341 return container_of(g, struct bcm63xx_udc, gadget); 342 } 343 344 static inline struct bcm63xx_ep *our_ep(struct usb_ep *ep) 345 { 346 return container_of(ep, struct bcm63xx_ep, ep); 347 } 348 349 static inline struct bcm63xx_req *our_req(struct usb_request *req) 350 { 351 return container_of(req, struct bcm63xx_req, req); 352 } 353 354 static inline u32 usbd_readl(struct bcm63xx_udc *udc, u32 off) 355 { 356 return bcm_readl(udc->usbd_regs + off); 357 } 358 359 static inline void usbd_writel(struct bcm63xx_udc *udc, u32 val, u32 off) 360 { 361 bcm_writel(val, udc->usbd_regs + off); 362 } 363 364 static inline u32 usb_dma_readl(struct bcm63xx_udc *udc, u32 off) 365 { 366 return bcm_readl(udc->iudma_regs + off); 367 } 368 369 static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off) 370 { 371 bcm_writel(val, udc->iudma_regs + off); 372 } 373 374 static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan) 375 { 376 return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off + 377 (ENETDMA_CHAN_WIDTH * chan)); 378 } 379 380 static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off, 381 int chan) 382 { 383 bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off + 384 (ENETDMA_CHAN_WIDTH * chan)); 385 } 386 387 static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan) 388 { 389 return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off + 390 (ENETDMA_CHAN_WIDTH * chan)); 391 } 392 393 static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off, 394 int chan) 395 { 396 bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off + 397 (ENETDMA_CHAN_WIDTH * chan)); 398 } 399 400 static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled) 401 { 402 if (is_enabled) { 403 clk_enable(udc->usbh_clk); 404 clk_enable(udc->usbd_clk); 405 udelay(10); 406 } else { 407 clk_disable(udc->usbd_clk); 408 clk_disable(udc->usbh_clk); 409 } 410 } 411 412 /*********************************************************************** 413 * Low-level IUDMA / FIFO operations 414 ***********************************************************************/ 415 416 /** 417 * bcm63xx_ep_dma_select - Helper function to set up the init_sel signal. 418 * @udc: Reference to the device controller. 419 * @idx: Desired init_sel value. 420 * 421 * The "init_sel" signal is used as a selection index for both endpoints 422 * and IUDMA channels. Since these do not map 1:1, the use of this signal 423 * depends on the context. 424 */ 425 static void bcm63xx_ep_dma_select(struct bcm63xx_udc *udc, int idx) 426 { 427 u32 val = usbd_readl(udc, USBD_CONTROL_REG); 428 429 val &= ~USBD_CONTROL_INIT_SEL_MASK; 430 val |= idx << USBD_CONTROL_INIT_SEL_SHIFT; 431 usbd_writel(udc, val, USBD_CONTROL_REG); 432 } 433 434 /** 435 * bcm63xx_set_stall - Enable/disable stall on one endpoint. 436 * @udc: Reference to the device controller. 437 * @bep: Endpoint on which to operate. 438 * @is_stalled: true to enable stall, false to disable. 439 * 440 * See notes in bcm63xx_update_wedge() regarding automatic clearing of 441 * halt/stall conditions. 442 */ 443 static void bcm63xx_set_stall(struct bcm63xx_udc *udc, struct bcm63xx_ep *bep, 444 bool is_stalled) 445 { 446 u32 val; 447 448 val = USBD_STALL_UPDATE_MASK | 449 (is_stalled ? USBD_STALL_ENABLE_MASK : 0) | 450 (bep->ep_num << USBD_STALL_EPNUM_SHIFT); 451 usbd_writel(udc, val, USBD_STALL_REG); 452 } 453 454 /** 455 * bcm63xx_fifo_setup - (Re)initialize FIFO boundaries and settings. 456 * @udc: Reference to the device controller. 457 * 458 * These parameters depend on the USB link speed. Settings are 459 * per-IUDMA-channel-pair. 460 */ 461 static void bcm63xx_fifo_setup(struct bcm63xx_udc *udc) 462 { 463 int is_hs = udc->gadget.speed == USB_SPEED_HIGH; 464 u32 i, val, rx_fifo_slot, tx_fifo_slot; 465 466 /* set up FIFO boundaries and packet sizes; this is done in pairs */ 467 rx_fifo_slot = tx_fifo_slot = 0; 468 for (i = 0; i < BCM63XX_NUM_IUDMA; i += 2) { 469 const struct iudma_ch_cfg *rx_cfg = &iudma_defaults[i]; 470 const struct iudma_ch_cfg *tx_cfg = &iudma_defaults[i + 1]; 471 472 bcm63xx_ep_dma_select(udc, i >> 1); 473 474 val = (rx_fifo_slot << USBD_RXFIFO_CONFIG_START_SHIFT) | 475 ((rx_fifo_slot + rx_cfg->n_fifo_slots - 1) << 476 USBD_RXFIFO_CONFIG_END_SHIFT); 477 rx_fifo_slot += rx_cfg->n_fifo_slots; 478 usbd_writel(udc, val, USBD_RXFIFO_CONFIG_REG); 479 usbd_writel(udc, 480 is_hs ? rx_cfg->max_pkt_hs : rx_cfg->max_pkt_fs, 481 USBD_RXFIFO_EPSIZE_REG); 482 483 val = (tx_fifo_slot << USBD_TXFIFO_CONFIG_START_SHIFT) | 484 ((tx_fifo_slot + tx_cfg->n_fifo_slots - 1) << 485 USBD_TXFIFO_CONFIG_END_SHIFT); 486 tx_fifo_slot += tx_cfg->n_fifo_slots; 487 usbd_writel(udc, val, USBD_TXFIFO_CONFIG_REG); 488 usbd_writel(udc, 489 is_hs ? tx_cfg->max_pkt_hs : tx_cfg->max_pkt_fs, 490 USBD_TXFIFO_EPSIZE_REG); 491 492 usbd_readl(udc, USBD_TXFIFO_EPSIZE_REG); 493 } 494 } 495 496 /** 497 * bcm63xx_fifo_reset_ep - Flush a single endpoint's FIFO. 498 * @udc: Reference to the device controller. 499 * @ep_num: Endpoint number. 500 */ 501 static void bcm63xx_fifo_reset_ep(struct bcm63xx_udc *udc, int ep_num) 502 { 503 u32 val; 504 505 bcm63xx_ep_dma_select(udc, ep_num); 506 507 val = usbd_readl(udc, USBD_CONTROL_REG); 508 val |= USBD_CONTROL_FIFO_RESET_MASK; 509 usbd_writel(udc, val, USBD_CONTROL_REG); 510 usbd_readl(udc, USBD_CONTROL_REG); 511 } 512 513 /** 514 * bcm63xx_fifo_reset - Flush all hardware FIFOs. 515 * @udc: Reference to the device controller. 516 */ 517 static void bcm63xx_fifo_reset(struct bcm63xx_udc *udc) 518 { 519 int i; 520 521 for (i = 0; i < BCM63XX_NUM_FIFO_PAIRS; i++) 522 bcm63xx_fifo_reset_ep(udc, i); 523 } 524 525 /** 526 * bcm63xx_ep_init - Initial (one-time) endpoint initialization. 527 * @udc: Reference to the device controller. 528 */ 529 static void bcm63xx_ep_init(struct bcm63xx_udc *udc) 530 { 531 u32 i, val; 532 533 for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { 534 const struct iudma_ch_cfg *cfg = &iudma_defaults[i]; 535 536 if (cfg->ep_num < 0) 537 continue; 538 539 bcm63xx_ep_dma_select(udc, cfg->ep_num); 540 val = (cfg->ep_type << USBD_EPNUM_TYPEMAP_TYPE_SHIFT) | 541 ((i >> 1) << USBD_EPNUM_TYPEMAP_DMA_CH_SHIFT); 542 usbd_writel(udc, val, USBD_EPNUM_TYPEMAP_REG); 543 } 544 } 545 546 /** 547 * bcm63xx_ep_setup - Configure per-endpoint settings. 548 * @udc: Reference to the device controller. 549 * 550 * This needs to be rerun if the speed/cfg/intf/altintf changes. 551 */ 552 static void bcm63xx_ep_setup(struct bcm63xx_udc *udc) 553 { 554 u32 val, i; 555 556 usbd_writel(udc, USBD_CSR_SETUPADDR_DEF, USBD_CSR_SETUPADDR_REG); 557 558 for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { 559 const struct iudma_ch_cfg *cfg = &iudma_defaults[i]; 560 int max_pkt = udc->gadget.speed == USB_SPEED_HIGH ? 561 cfg->max_pkt_hs : cfg->max_pkt_fs; 562 int idx = cfg->ep_num; 563 564 udc->iudma[i].max_pkt = max_pkt; 565 566 if (idx < 0) 567 continue; 568 usb_ep_set_maxpacket_limit(&udc->bep[idx].ep, max_pkt); 569 570 val = (idx << USBD_CSR_EP_LOG_SHIFT) | 571 (cfg->dir << USBD_CSR_EP_DIR_SHIFT) | 572 (cfg->ep_type << USBD_CSR_EP_TYPE_SHIFT) | 573 (udc->cfg << USBD_CSR_EP_CFG_SHIFT) | 574 (udc->iface << USBD_CSR_EP_IFACE_SHIFT) | 575 (udc->alt_iface << USBD_CSR_EP_ALTIFACE_SHIFT) | 576 (max_pkt << USBD_CSR_EP_MAXPKT_SHIFT); 577 usbd_writel(udc, val, USBD_CSR_EP_REG(idx)); 578 } 579 } 580 581 /** 582 * iudma_write - Queue a single IUDMA transaction. 583 * @udc: Reference to the device controller. 584 * @iudma: IUDMA channel to use. 585 * @breq: Request containing the transaction data. 586 * 587 * For RX IUDMA, this will queue a single buffer descriptor, as RX IUDMA 588 * does not honor SOP/EOP so the handling of multiple buffers is ambiguous. 589 * So iudma_write() may be called several times to fulfill a single 590 * usb_request. 591 * 592 * For TX IUDMA, this can queue multiple buffer descriptors if needed. 593 */ 594 static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma, 595 struct bcm63xx_req *breq) 596 { 597 int first_bd = 1, last_bd = 0, extra_zero_pkt = 0; 598 unsigned int bytes_left = breq->req.length - breq->offset; 599 const int max_bd_bytes = !irq_coalesce && !iudma->is_tx ? 600 iudma->max_pkt : IUDMA_MAX_FRAGMENT; 601 602 iudma->n_bds_used = 0; 603 breq->bd_bytes = 0; 604 breq->iudma = iudma; 605 606 if ((bytes_left % iudma->max_pkt == 0) && bytes_left && breq->req.zero) 607 extra_zero_pkt = 1; 608 609 do { 610 struct bcm_enet_desc *d = iudma->write_bd; 611 u32 dmaflags = 0; 612 unsigned int n_bytes; 613 614 if (d == iudma->end_bd) { 615 dmaflags |= DMADESC_WRAP_MASK; 616 iudma->write_bd = iudma->bd_ring; 617 } else { 618 iudma->write_bd++; 619 } 620 iudma->n_bds_used++; 621 622 n_bytes = min_t(int, bytes_left, max_bd_bytes); 623 if (n_bytes) 624 dmaflags |= n_bytes << DMADESC_LENGTH_SHIFT; 625 else 626 dmaflags |= (1 << DMADESC_LENGTH_SHIFT) | 627 DMADESC_USB_ZERO_MASK; 628 629 dmaflags |= DMADESC_OWNER_MASK; 630 if (first_bd) { 631 dmaflags |= DMADESC_SOP_MASK; 632 first_bd = 0; 633 } 634 635 /* 636 * extra_zero_pkt forces one more iteration through the loop 637 * after all data is queued up, to send the zero packet 638 */ 639 if (extra_zero_pkt && !bytes_left) 640 extra_zero_pkt = 0; 641 642 if (!iudma->is_tx || iudma->n_bds_used == iudma->n_bds || 643 (n_bytes == bytes_left && !extra_zero_pkt)) { 644 last_bd = 1; 645 dmaflags |= DMADESC_EOP_MASK; 646 } 647 648 d->address = breq->req.dma + breq->offset; 649 mb(); 650 d->len_stat = dmaflags; 651 652 breq->offset += n_bytes; 653 breq->bd_bytes += n_bytes; 654 bytes_left -= n_bytes; 655 } while (!last_bd); 656 657 usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK, 658 ENETDMAC_CHANCFG_REG, iudma->ch_idx); 659 } 660 661 /** 662 * iudma_read - Check for IUDMA buffer completion. 663 * @udc: Reference to the device controller. 664 * @iudma: IUDMA channel to use. 665 * 666 * This checks to see if ALL of the outstanding BDs on the DMA channel 667 * have been filled. If so, it returns the actual transfer length; 668 * otherwise it returns -EBUSY. 669 */ 670 static int iudma_read(struct bcm63xx_udc *udc, struct iudma_ch *iudma) 671 { 672 int i, actual_len = 0; 673 struct bcm_enet_desc *d = iudma->read_bd; 674 675 if (!iudma->n_bds_used) 676 return -EINVAL; 677 678 for (i = 0; i < iudma->n_bds_used; i++) { 679 u32 dmaflags; 680 681 dmaflags = d->len_stat; 682 683 if (dmaflags & DMADESC_OWNER_MASK) 684 return -EBUSY; 685 686 actual_len += (dmaflags & DMADESC_LENGTH_MASK) >> 687 DMADESC_LENGTH_SHIFT; 688 if (d == iudma->end_bd) 689 d = iudma->bd_ring; 690 else 691 d++; 692 } 693 694 iudma->read_bd = d; 695 iudma->n_bds_used = 0; 696 return actual_len; 697 } 698 699 /** 700 * iudma_reset_channel - Stop DMA on a single channel. 701 * @udc: Reference to the device controller. 702 * @iudma: IUDMA channel to reset. 703 */ 704 static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) 705 { 706 int timeout = IUDMA_RESET_TIMEOUT_US; 707 struct bcm_enet_desc *d; 708 int ch_idx = iudma->ch_idx; 709 710 if (!iudma->is_tx) 711 bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num)); 712 713 /* stop DMA, then wait for the hardware to wrap up */ 714 usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx); 715 716 while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) & 717 ENETDMAC_CHANCFG_EN_MASK) { 718 udelay(1); 719 720 /* repeatedly flush the FIFO data until the BD completes */ 721 if (iudma->is_tx && iudma->ep_num >= 0) 722 bcm63xx_fifo_reset_ep(udc, iudma->ep_num); 723 724 if (!timeout--) { 725 dev_err(udc->dev, "can't reset IUDMA channel %d\n", 726 ch_idx); 727 break; 728 } 729 if (timeout == IUDMA_RESET_TIMEOUT_US / 2) { 730 dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n", 731 ch_idx); 732 usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK, 733 ENETDMAC_CHANCFG_REG, ch_idx); 734 } 735 } 736 usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx); 737 738 /* don't leave "live" HW-owned entries for the next guy to step on */ 739 for (d = iudma->bd_ring; d <= iudma->end_bd; d++) 740 d->len_stat = 0; 741 mb(); 742 743 iudma->read_bd = iudma->write_bd = iudma->bd_ring; 744 iudma->n_bds_used = 0; 745 746 /* set up IRQs, UBUS burst size, and BD base for this channel */ 747 usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, 748 ENETDMAC_IRMASK_REG, ch_idx); 749 usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx); 750 751 usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx); 752 usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx); 753 } 754 755 /** 756 * iudma_init_channel - One-time IUDMA channel initialization. 757 * @udc: Reference to the device controller. 758 * @ch_idx: Channel to initialize. 759 */ 760 static int iudma_init_channel(struct bcm63xx_udc *udc, unsigned int ch_idx) 761 { 762 struct iudma_ch *iudma = &udc->iudma[ch_idx]; 763 const struct iudma_ch_cfg *cfg = &iudma_defaults[ch_idx]; 764 unsigned int n_bds = cfg->n_bds; 765 struct bcm63xx_ep *bep = NULL; 766 767 iudma->ep_num = cfg->ep_num; 768 iudma->ch_idx = ch_idx; 769 iudma->is_tx = !!(ch_idx & 0x01); 770 if (iudma->ep_num >= 0) { 771 bep = &udc->bep[iudma->ep_num]; 772 bep->iudma = iudma; 773 INIT_LIST_HEAD(&bep->queue); 774 } 775 776 iudma->bep = bep; 777 iudma->udc = udc; 778 779 /* ep0 is always active; others are controlled by the gadget driver */ 780 if (iudma->ep_num <= 0) 781 iudma->enabled = true; 782 783 iudma->n_bds = n_bds; 784 iudma->bd_ring = dmam_alloc_coherent(udc->dev, 785 n_bds * sizeof(struct bcm_enet_desc), 786 &iudma->bd_ring_dma, GFP_KERNEL); 787 if (!iudma->bd_ring) 788 return -ENOMEM; 789 iudma->end_bd = &iudma->bd_ring[n_bds - 1]; 790 791 return 0; 792 } 793 794 /** 795 * iudma_init - One-time initialization of all IUDMA channels. 796 * @udc: Reference to the device controller. 797 * 798 * Enable DMA, flush channels, and enable global IUDMA IRQs. 799 */ 800 static int iudma_init(struct bcm63xx_udc *udc) 801 { 802 int i, rc; 803 804 usb_dma_writel(udc, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG); 805 806 for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { 807 rc = iudma_init_channel(udc, i); 808 if (rc) 809 return rc; 810 iudma_reset_channel(udc, &udc->iudma[i]); 811 } 812 813 usb_dma_writel(udc, BIT(BCM63XX_NUM_IUDMA)-1, ENETDMA_GLB_IRQMASK_REG); 814 return 0; 815 } 816 817 /** 818 * iudma_uninit - Uninitialize IUDMA channels. 819 * @udc: Reference to the device controller. 820 * 821 * Kill global IUDMA IRQs, flush channels, and kill DMA. 822 */ 823 static void iudma_uninit(struct bcm63xx_udc *udc) 824 { 825 int i; 826 827 usb_dma_writel(udc, 0, ENETDMA_GLB_IRQMASK_REG); 828 829 for (i = 0; i < BCM63XX_NUM_IUDMA; i++) 830 iudma_reset_channel(udc, &udc->iudma[i]); 831 832 usb_dma_writel(udc, 0, ENETDMA_CFG_REG); 833 } 834 835 /*********************************************************************** 836 * Other low-level USBD operations 837 ***********************************************************************/ 838 839 /** 840 * bcm63xx_set_ctrl_irqs - Mask/unmask control path interrupts. 841 * @udc: Reference to the device controller. 842 * @enable_irqs: true to enable, false to disable. 843 */ 844 static void bcm63xx_set_ctrl_irqs(struct bcm63xx_udc *udc, bool enable_irqs) 845 { 846 u32 val; 847 848 usbd_writel(udc, 0, USBD_STATUS_REG); 849 850 val = BIT(USBD_EVENT_IRQ_USB_RESET) | 851 BIT(USBD_EVENT_IRQ_SETUP) | 852 BIT(USBD_EVENT_IRQ_SETCFG) | 853 BIT(USBD_EVENT_IRQ_SETINTF) | 854 BIT(USBD_EVENT_IRQ_USB_LINK); 855 usbd_writel(udc, enable_irqs ? val : 0, USBD_EVENT_IRQ_MASK_REG); 856 usbd_writel(udc, val, USBD_EVENT_IRQ_STATUS_REG); 857 } 858 859 /** 860 * bcm63xx_select_phy_mode - Select between USB device and host mode. 861 * @udc: Reference to the device controller. 862 * @is_device: true for device, false for host. 863 * 864 * This should probably be reworked to use the drivers/usb/otg 865 * infrastructure. 866 * 867 * By default, the AFE/pullups are disabled in device mode, until 868 * bcm63xx_select_pullup() is called. 869 */ 870 static void bcm63xx_select_phy_mode(struct bcm63xx_udc *udc, bool is_device) 871 { 872 u32 val, portmask = BIT(udc->pd->port_no); 873 874 if (BCMCPU_IS_6328()) { 875 /* configure pinmux to sense VBUS signal */ 876 val = bcm_gpio_readl(GPIO_PINMUX_OTHR_REG); 877 val &= ~GPIO_PINMUX_OTHR_6328_USB_MASK; 878 val |= is_device ? GPIO_PINMUX_OTHR_6328_USB_DEV : 879 GPIO_PINMUX_OTHR_6328_USB_HOST; 880 bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG); 881 } 882 883 val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); 884 if (is_device) { 885 val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); 886 val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); 887 } else { 888 val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); 889 val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); 890 } 891 bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); 892 893 val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG); 894 if (is_device) 895 val |= USBH_PRIV_SWAP_USBD_MASK; 896 else 897 val &= ~USBH_PRIV_SWAP_USBD_MASK; 898 bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG); 899 } 900 901 /** 902 * bcm63xx_select_pullup - Enable/disable the pullup on D+ 903 * @udc: Reference to the device controller. 904 * @is_on: true to enable the pullup, false to disable. 905 * 906 * If the pullup is active, the host will sense a FS/HS device connected to 907 * the port. If the pullup is inactive, the host will think the USB 908 * device has been disconnected. 909 */ 910 static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on) 911 { 912 u32 val, portmask = BIT(udc->pd->port_no); 913 914 val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); 915 if (is_on) 916 val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); 917 else 918 val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); 919 bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); 920 } 921 922 /** 923 * bcm63xx_uninit_udc_hw - Shut down the hardware prior to driver removal. 924 * @udc: Reference to the device controller. 925 * 926 * This just masks the IUDMA IRQs and releases the clocks. It is assumed 927 * that bcm63xx_udc_stop() has already run, and the clocks are stopped. 928 */ 929 static void bcm63xx_uninit_udc_hw(struct bcm63xx_udc *udc) 930 { 931 set_clocks(udc, true); 932 iudma_uninit(udc); 933 set_clocks(udc, false); 934 935 clk_put(udc->usbd_clk); 936 clk_put(udc->usbh_clk); 937 } 938 939 /** 940 * bcm63xx_init_udc_hw - Initialize the controller hardware and data structures. 941 * @udc: Reference to the device controller. 942 */ 943 static int bcm63xx_init_udc_hw(struct bcm63xx_udc *udc) 944 { 945 int i, rc = 0; 946 u32 val; 947 948 udc->ep0_ctrl_buf = devm_kzalloc(udc->dev, BCM63XX_MAX_CTRL_PKT, 949 GFP_KERNEL); 950 if (!udc->ep0_ctrl_buf) 951 return -ENOMEM; 952 953 INIT_LIST_HEAD(&udc->gadget.ep_list); 954 for (i = 0; i < BCM63XX_NUM_EP; i++) { 955 struct bcm63xx_ep *bep = &udc->bep[i]; 956 957 bep->ep.name = bcm63xx_ep_info[i].name; 958 bep->ep.caps = bcm63xx_ep_info[i].caps; 959 bep->ep_num = i; 960 bep->ep.ops = &bcm63xx_udc_ep_ops; 961 list_add_tail(&bep->ep.ep_list, &udc->gadget.ep_list); 962 bep->halted = 0; 963 usb_ep_set_maxpacket_limit(&bep->ep, BCM63XX_MAX_CTRL_PKT); 964 bep->udc = udc; 965 bep->ep.desc = NULL; 966 INIT_LIST_HEAD(&bep->queue); 967 } 968 969 udc->gadget.ep0 = &udc->bep[0].ep; 970 list_del(&udc->bep[0].ep.ep_list); 971 972 udc->gadget.speed = USB_SPEED_UNKNOWN; 973 udc->ep0state = EP0_SHUTDOWN; 974 975 udc->usbh_clk = clk_get(udc->dev, "usbh"); 976 if (IS_ERR(udc->usbh_clk)) 977 return -EIO; 978 979 udc->usbd_clk = clk_get(udc->dev, "usbd"); 980 if (IS_ERR(udc->usbd_clk)) { 981 clk_put(udc->usbh_clk); 982 return -EIO; 983 } 984 985 set_clocks(udc, true); 986 987 val = USBD_CONTROL_AUTO_CSRS_MASK | 988 USBD_CONTROL_DONE_CSRS_MASK | 989 (irq_coalesce ? USBD_CONTROL_RXZSCFG_MASK : 0); 990 usbd_writel(udc, val, USBD_CONTROL_REG); 991 992 val = USBD_STRAPS_APP_SELF_PWR_MASK | 993 USBD_STRAPS_APP_RAM_IF_MASK | 994 USBD_STRAPS_APP_CSRPRGSUP_MASK | 995 USBD_STRAPS_APP_8BITPHY_MASK | 996 USBD_STRAPS_APP_RMTWKUP_MASK; 997 998 if (udc->gadget.max_speed == USB_SPEED_HIGH) 999 val |= (BCM63XX_SPD_HIGH << USBD_STRAPS_SPEED_SHIFT); 1000 else 1001 val |= (BCM63XX_SPD_FULL << USBD_STRAPS_SPEED_SHIFT); 1002 usbd_writel(udc, val, USBD_STRAPS_REG); 1003 1004 bcm63xx_set_ctrl_irqs(udc, false); 1005 1006 usbd_writel(udc, 0, USBD_EVENT_IRQ_CFG_LO_REG); 1007 1008 val = USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_ENUM_ON) | 1009 USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_SET_CSRS); 1010 usbd_writel(udc, val, USBD_EVENT_IRQ_CFG_HI_REG); 1011 1012 rc = iudma_init(udc); 1013 set_clocks(udc, false); 1014 if (rc) 1015 bcm63xx_uninit_udc_hw(udc); 1016 1017 return 0; 1018 } 1019 1020 /*********************************************************************** 1021 * Standard EP gadget operations 1022 ***********************************************************************/ 1023 1024 /** 1025 * bcm63xx_ep_enable - Enable one endpoint. 1026 * @ep: Endpoint to enable. 1027 * @desc: Contains max packet, direction, etc. 1028 * 1029 * Most of the endpoint parameters are fixed in this controller, so there 1030 * isn't much for this function to do. 1031 */ 1032 static int bcm63xx_ep_enable(struct usb_ep *ep, 1033 const struct usb_endpoint_descriptor *desc) 1034 { 1035 struct bcm63xx_ep *bep = our_ep(ep); 1036 struct bcm63xx_udc *udc = bep->udc; 1037 struct iudma_ch *iudma = bep->iudma; 1038 unsigned long flags; 1039 1040 if (!ep || !desc || ep->name == bcm63xx_ep0name) 1041 return -EINVAL; 1042 1043 if (!udc->driver) 1044 return -ESHUTDOWN; 1045 1046 spin_lock_irqsave(&udc->lock, flags); 1047 if (iudma->enabled) { 1048 spin_unlock_irqrestore(&udc->lock, flags); 1049 return -EINVAL; 1050 } 1051 1052 iudma->enabled = true; 1053 BUG_ON(!list_empty(&bep->queue)); 1054 1055 iudma_reset_channel(udc, iudma); 1056 1057 bep->halted = 0; 1058 bcm63xx_set_stall(udc, bep, false); 1059 clear_bit(bep->ep_num, &udc->wedgemap); 1060 1061 ep->desc = desc; 1062 ep->maxpacket = usb_endpoint_maxp(desc); 1063 1064 spin_unlock_irqrestore(&udc->lock, flags); 1065 return 0; 1066 } 1067 1068 /** 1069 * bcm63xx_ep_disable - Disable one endpoint. 1070 * @ep: Endpoint to disable. 1071 */ 1072 static int bcm63xx_ep_disable(struct usb_ep *ep) 1073 { 1074 struct bcm63xx_ep *bep = our_ep(ep); 1075 struct bcm63xx_udc *udc = bep->udc; 1076 struct iudma_ch *iudma = bep->iudma; 1077 struct bcm63xx_req *breq, *n; 1078 unsigned long flags; 1079 1080 if (!ep || !ep->desc) 1081 return -EINVAL; 1082 1083 spin_lock_irqsave(&udc->lock, flags); 1084 if (!iudma->enabled) { 1085 spin_unlock_irqrestore(&udc->lock, flags); 1086 return -EINVAL; 1087 } 1088 iudma->enabled = false; 1089 1090 iudma_reset_channel(udc, iudma); 1091 1092 if (!list_empty(&bep->queue)) { 1093 list_for_each_entry_safe(breq, n, &bep->queue, queue) { 1094 usb_gadget_unmap_request(&udc->gadget, &breq->req, 1095 iudma->is_tx); 1096 list_del(&breq->queue); 1097 breq->req.status = -ESHUTDOWN; 1098 1099 spin_unlock_irqrestore(&udc->lock, flags); 1100 usb_gadget_giveback_request(&iudma->bep->ep, &breq->req); 1101 spin_lock_irqsave(&udc->lock, flags); 1102 } 1103 } 1104 ep->desc = NULL; 1105 1106 spin_unlock_irqrestore(&udc->lock, flags); 1107 return 0; 1108 } 1109 1110 /** 1111 * bcm63xx_udc_alloc_request - Allocate a new request. 1112 * @ep: Endpoint associated with the request. 1113 * @mem_flags: Flags to pass to kzalloc(). 1114 */ 1115 static struct usb_request *bcm63xx_udc_alloc_request(struct usb_ep *ep, 1116 gfp_t mem_flags) 1117 { 1118 struct bcm63xx_req *breq; 1119 1120 breq = kzalloc(sizeof(*breq), mem_flags); 1121 if (!breq) 1122 return NULL; 1123 return &breq->req; 1124 } 1125 1126 /** 1127 * bcm63xx_udc_free_request - Free a request. 1128 * @ep: Endpoint associated with the request. 1129 * @req: Request to free. 1130 */ 1131 static void bcm63xx_udc_free_request(struct usb_ep *ep, 1132 struct usb_request *req) 1133 { 1134 struct bcm63xx_req *breq = our_req(req); 1135 kfree(breq); 1136 } 1137 1138 /** 1139 * bcm63xx_udc_queue - Queue up a new request. 1140 * @ep: Endpoint associated with the request. 1141 * @req: Request to add. 1142 * @mem_flags: Unused. 1143 * 1144 * If the queue is empty, start this request immediately. Otherwise, add 1145 * it to the list. 1146 * 1147 * ep0 replies are sent through this function from the gadget driver, but 1148 * they are treated differently because they need to be handled by the ep0 1149 * state machine. (Sometimes they are replies to control requests that 1150 * were spoofed by this driver, and so they shouldn't be transmitted at all.) 1151 */ 1152 static int bcm63xx_udc_queue(struct usb_ep *ep, struct usb_request *req, 1153 gfp_t mem_flags) 1154 { 1155 struct bcm63xx_ep *bep = our_ep(ep); 1156 struct bcm63xx_udc *udc = bep->udc; 1157 struct bcm63xx_req *breq = our_req(req); 1158 unsigned long flags; 1159 int rc = 0; 1160 1161 if (unlikely(!req || !req->complete || !req->buf || !ep)) 1162 return -EINVAL; 1163 1164 req->actual = 0; 1165 req->status = 0; 1166 breq->offset = 0; 1167 1168 if (bep == &udc->bep[0]) { 1169 /* only one reply per request, please */ 1170 if (udc->ep0_reply) 1171 return -EINVAL; 1172 1173 udc->ep0_reply = req; 1174 schedule_work(&udc->ep0_wq); 1175 return 0; 1176 } 1177 1178 spin_lock_irqsave(&udc->lock, flags); 1179 if (!bep->iudma->enabled) { 1180 rc = -ESHUTDOWN; 1181 goto out; 1182 } 1183 1184 rc = usb_gadget_map_request(&udc->gadget, req, bep->iudma->is_tx); 1185 if (rc == 0) { 1186 list_add_tail(&breq->queue, &bep->queue); 1187 if (list_is_singular(&bep->queue)) 1188 iudma_write(udc, bep->iudma, breq); 1189 } 1190 1191 out: 1192 spin_unlock_irqrestore(&udc->lock, flags); 1193 return rc; 1194 } 1195 1196 /** 1197 * bcm63xx_udc_dequeue - Remove a pending request from the queue. 1198 * @ep: Endpoint associated with the request. 1199 * @req: Request to remove. 1200 * 1201 * If the request is not at the head of the queue, this is easy - just nuke 1202 * it. If the request is at the head of the queue, we'll need to stop the 1203 * DMA transaction and then queue up the successor. 1204 */ 1205 static int bcm63xx_udc_dequeue(struct usb_ep *ep, struct usb_request *req) 1206 { 1207 struct bcm63xx_ep *bep = our_ep(ep); 1208 struct bcm63xx_udc *udc = bep->udc; 1209 struct bcm63xx_req *breq = our_req(req), *cur; 1210 unsigned long flags; 1211 int rc = 0; 1212 1213 spin_lock_irqsave(&udc->lock, flags); 1214 if (list_empty(&bep->queue)) { 1215 rc = -EINVAL; 1216 goto out; 1217 } 1218 1219 cur = list_first_entry(&bep->queue, struct bcm63xx_req, queue); 1220 usb_gadget_unmap_request(&udc->gadget, &breq->req, bep->iudma->is_tx); 1221 1222 if (breq == cur) { 1223 iudma_reset_channel(udc, bep->iudma); 1224 list_del(&breq->queue); 1225 1226 if (!list_empty(&bep->queue)) { 1227 struct bcm63xx_req *next; 1228 1229 next = list_first_entry(&bep->queue, 1230 struct bcm63xx_req, queue); 1231 iudma_write(udc, bep->iudma, next); 1232 } 1233 } else { 1234 list_del(&breq->queue); 1235 } 1236 1237 out: 1238 spin_unlock_irqrestore(&udc->lock, flags); 1239 1240 req->status = -ESHUTDOWN; 1241 req->complete(ep, req); 1242 1243 return rc; 1244 } 1245 1246 /** 1247 * bcm63xx_udc_set_halt - Enable/disable STALL flag in the hardware. 1248 * @ep: Endpoint to halt. 1249 * @value: Zero to clear halt; nonzero to set halt. 1250 * 1251 * See comments in bcm63xx_update_wedge(). 1252 */ 1253 static int bcm63xx_udc_set_halt(struct usb_ep *ep, int value) 1254 { 1255 struct bcm63xx_ep *bep = our_ep(ep); 1256 struct bcm63xx_udc *udc = bep->udc; 1257 unsigned long flags; 1258 1259 spin_lock_irqsave(&udc->lock, flags); 1260 bcm63xx_set_stall(udc, bep, !!value); 1261 bep->halted = value; 1262 spin_unlock_irqrestore(&udc->lock, flags); 1263 1264 return 0; 1265 } 1266 1267 /** 1268 * bcm63xx_udc_set_wedge - Stall the endpoint until the next reset. 1269 * @ep: Endpoint to wedge. 1270 * 1271 * See comments in bcm63xx_update_wedge(). 1272 */ 1273 static int bcm63xx_udc_set_wedge(struct usb_ep *ep) 1274 { 1275 struct bcm63xx_ep *bep = our_ep(ep); 1276 struct bcm63xx_udc *udc = bep->udc; 1277 unsigned long flags; 1278 1279 spin_lock_irqsave(&udc->lock, flags); 1280 set_bit(bep->ep_num, &udc->wedgemap); 1281 bcm63xx_set_stall(udc, bep, true); 1282 spin_unlock_irqrestore(&udc->lock, flags); 1283 1284 return 0; 1285 } 1286 1287 static const struct usb_ep_ops bcm63xx_udc_ep_ops = { 1288 .enable = bcm63xx_ep_enable, 1289 .disable = bcm63xx_ep_disable, 1290 1291 .alloc_request = bcm63xx_udc_alloc_request, 1292 .free_request = bcm63xx_udc_free_request, 1293 1294 .queue = bcm63xx_udc_queue, 1295 .dequeue = bcm63xx_udc_dequeue, 1296 1297 .set_halt = bcm63xx_udc_set_halt, 1298 .set_wedge = bcm63xx_udc_set_wedge, 1299 }; 1300 1301 /*********************************************************************** 1302 * EP0 handling 1303 ***********************************************************************/ 1304 1305 /** 1306 * bcm63xx_ep0_setup_callback - Drop spinlock to invoke ->setup callback. 1307 * @udc: Reference to the device controller. 1308 * @ctrl: 8-byte SETUP request. 1309 */ 1310 static int bcm63xx_ep0_setup_callback(struct bcm63xx_udc *udc, 1311 struct usb_ctrlrequest *ctrl) 1312 { 1313 int rc; 1314 1315 spin_unlock_irq(&udc->lock); 1316 rc = udc->driver->setup(&udc->gadget, ctrl); 1317 spin_lock_irq(&udc->lock); 1318 return rc; 1319 } 1320 1321 /** 1322 * bcm63xx_ep0_spoof_set_cfg - Synthesize a SET_CONFIGURATION request. 1323 * @udc: Reference to the device controller. 1324 * 1325 * Many standard requests are handled automatically in the hardware, but 1326 * we still need to pass them to the gadget driver so that it can 1327 * reconfigure the interfaces/endpoints if necessary. 1328 * 1329 * Unfortunately we are not able to send a STALL response if the host 1330 * requests an invalid configuration. If this happens, we'll have to be 1331 * content with printing a warning. 1332 */ 1333 static int bcm63xx_ep0_spoof_set_cfg(struct bcm63xx_udc *udc) 1334 { 1335 struct usb_ctrlrequest ctrl; 1336 int rc; 1337 1338 ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_DEVICE; 1339 ctrl.bRequest = USB_REQ_SET_CONFIGURATION; 1340 ctrl.wValue = cpu_to_le16(udc->cfg); 1341 ctrl.wIndex = 0; 1342 ctrl.wLength = 0; 1343 1344 rc = bcm63xx_ep0_setup_callback(udc, &ctrl); 1345 if (rc < 0) { 1346 dev_warn_ratelimited(udc->dev, 1347 "hardware auto-acked bad SET_CONFIGURATION(%d) request\n", 1348 udc->cfg); 1349 } 1350 return rc; 1351 } 1352 1353 /** 1354 * bcm63xx_ep0_spoof_set_iface - Synthesize a SET_INTERFACE request. 1355 * @udc: Reference to the device controller. 1356 */ 1357 static int bcm63xx_ep0_spoof_set_iface(struct bcm63xx_udc *udc) 1358 { 1359 struct usb_ctrlrequest ctrl; 1360 int rc; 1361 1362 ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_INTERFACE; 1363 ctrl.bRequest = USB_REQ_SET_INTERFACE; 1364 ctrl.wValue = cpu_to_le16(udc->alt_iface); 1365 ctrl.wIndex = cpu_to_le16(udc->iface); 1366 ctrl.wLength = 0; 1367 1368 rc = bcm63xx_ep0_setup_callback(udc, &ctrl); 1369 if (rc < 0) { 1370 dev_warn_ratelimited(udc->dev, 1371 "hardware auto-acked bad SET_INTERFACE(%d,%d) request\n", 1372 udc->iface, udc->alt_iface); 1373 } 1374 return rc; 1375 } 1376 1377 /** 1378 * bcm63xx_ep0_map_write - dma_map and iudma_write a single request. 1379 * @udc: Reference to the device controller. 1380 * @ch_idx: IUDMA channel number. 1381 * @req: USB gadget layer representation of the request. 1382 */ 1383 static void bcm63xx_ep0_map_write(struct bcm63xx_udc *udc, int ch_idx, 1384 struct usb_request *req) 1385 { 1386 struct bcm63xx_req *breq = our_req(req); 1387 struct iudma_ch *iudma = &udc->iudma[ch_idx]; 1388 1389 BUG_ON(udc->ep0_request); 1390 udc->ep0_request = req; 1391 1392 req->actual = 0; 1393 breq->offset = 0; 1394 usb_gadget_map_request(&udc->gadget, req, iudma->is_tx); 1395 iudma_write(udc, iudma, breq); 1396 } 1397 1398 /** 1399 * bcm63xx_ep0_complete - Set completion status and "stage" the callback. 1400 * @udc: Reference to the device controller. 1401 * @req: USB gadget layer representation of the request. 1402 * @status: Status to return to the gadget driver. 1403 */ 1404 static void bcm63xx_ep0_complete(struct bcm63xx_udc *udc, 1405 struct usb_request *req, int status) 1406 { 1407 req->status = status; 1408 if (status) 1409 req->actual = 0; 1410 if (req->complete) { 1411 spin_unlock_irq(&udc->lock); 1412 req->complete(&udc->bep[0].ep, req); 1413 spin_lock_irq(&udc->lock); 1414 } 1415 } 1416 1417 /** 1418 * bcm63xx_ep0_nuke_reply - Abort request from the gadget driver due to 1419 * reset/shutdown. 1420 * @udc: Reference to the device controller. 1421 * @is_tx: Nonzero for TX (IN), zero for RX (OUT). 1422 */ 1423 static void bcm63xx_ep0_nuke_reply(struct bcm63xx_udc *udc, int is_tx) 1424 { 1425 struct usb_request *req = udc->ep0_reply; 1426 1427 udc->ep0_reply = NULL; 1428 usb_gadget_unmap_request(&udc->gadget, req, is_tx); 1429 if (udc->ep0_request == req) { 1430 udc->ep0_req_completed = 0; 1431 udc->ep0_request = NULL; 1432 } 1433 bcm63xx_ep0_complete(udc, req, -ESHUTDOWN); 1434 } 1435 1436 /** 1437 * bcm63xx_ep0_read_complete - Close out the pending ep0 request; return 1438 * transfer len. 1439 * @udc: Reference to the device controller. 1440 */ 1441 static int bcm63xx_ep0_read_complete(struct bcm63xx_udc *udc) 1442 { 1443 struct usb_request *req = udc->ep0_request; 1444 1445 udc->ep0_req_completed = 0; 1446 udc->ep0_request = NULL; 1447 1448 return req->actual; 1449 } 1450 1451 /** 1452 * bcm63xx_ep0_internal_request - Helper function to submit an ep0 request. 1453 * @udc: Reference to the device controller. 1454 * @ch_idx: IUDMA channel number. 1455 * @length: Number of bytes to TX/RX. 1456 * 1457 * Used for simple transfers performed by the ep0 worker. This will always 1458 * use ep0_ctrl_req / ep0_ctrl_buf. 1459 */ 1460 static void bcm63xx_ep0_internal_request(struct bcm63xx_udc *udc, int ch_idx, 1461 int length) 1462 { 1463 struct usb_request *req = &udc->ep0_ctrl_req.req; 1464 1465 req->buf = udc->ep0_ctrl_buf; 1466 req->length = length; 1467 req->complete = NULL; 1468 1469 bcm63xx_ep0_map_write(udc, ch_idx, req); 1470 } 1471 1472 /** 1473 * bcm63xx_ep0_do_setup - Parse new SETUP packet and decide how to handle it. 1474 * @udc: Reference to the device controller. 1475 * 1476 * EP0_IDLE probably shouldn't ever happen. EP0_REQUEUE means we're ready 1477 * for the next packet. Anything else means the transaction requires multiple 1478 * stages of handling. 1479 */ 1480 static enum bcm63xx_ep0_state bcm63xx_ep0_do_setup(struct bcm63xx_udc *udc) 1481 { 1482 int rc; 1483 struct usb_ctrlrequest *ctrl = (void *)udc->ep0_ctrl_buf; 1484 1485 rc = bcm63xx_ep0_read_complete(udc); 1486 1487 if (rc < 0) { 1488 dev_err(udc->dev, "missing SETUP packet\n"); 1489 return EP0_IDLE; 1490 } 1491 1492 /* 1493 * Handle 0-byte IN STATUS acknowledgement. The hardware doesn't 1494 * ALWAYS deliver these 100% of the time, so if we happen to see one, 1495 * just throw it away. 1496 */ 1497 if (rc == 0) 1498 return EP0_REQUEUE; 1499 1500 /* Drop malformed SETUP packets */ 1501 if (rc != sizeof(*ctrl)) { 1502 dev_warn_ratelimited(udc->dev, 1503 "malformed SETUP packet (%d bytes)\n", rc); 1504 return EP0_REQUEUE; 1505 } 1506 1507 /* Process new SETUP packet arriving on ep0 */ 1508 rc = bcm63xx_ep0_setup_callback(udc, ctrl); 1509 if (rc < 0) { 1510 bcm63xx_set_stall(udc, &udc->bep[0], true); 1511 return EP0_REQUEUE; 1512 } 1513 1514 if (!ctrl->wLength) 1515 return EP0_REQUEUE; 1516 else if (ctrl->bRequestType & USB_DIR_IN) 1517 return EP0_IN_DATA_PHASE_SETUP; 1518 else 1519 return EP0_OUT_DATA_PHASE_SETUP; 1520 } 1521 1522 /** 1523 * bcm63xx_ep0_do_idle - Check for outstanding requests if ep0 is idle. 1524 * @udc: Reference to the device controller. 1525 * 1526 * In state EP0_IDLE, the RX descriptor is either pending, or has been 1527 * filled with a SETUP packet from the host. This function handles new 1528 * SETUP packets, control IRQ events (which can generate fake SETUP packets), 1529 * and reset/shutdown events. 1530 * 1531 * Returns 0 if work was done; -EAGAIN if nothing to do. 1532 */ 1533 static int bcm63xx_ep0_do_idle(struct bcm63xx_udc *udc) 1534 { 1535 if (udc->ep0_req_reset) { 1536 udc->ep0_req_reset = 0; 1537 } else if (udc->ep0_req_set_cfg) { 1538 udc->ep0_req_set_cfg = 0; 1539 if (bcm63xx_ep0_spoof_set_cfg(udc) >= 0) 1540 udc->ep0state = EP0_IN_FAKE_STATUS_PHASE; 1541 } else if (udc->ep0_req_set_iface) { 1542 udc->ep0_req_set_iface = 0; 1543 if (bcm63xx_ep0_spoof_set_iface(udc) >= 0) 1544 udc->ep0state = EP0_IN_FAKE_STATUS_PHASE; 1545 } else if (udc->ep0_req_completed) { 1546 udc->ep0state = bcm63xx_ep0_do_setup(udc); 1547 return udc->ep0state == EP0_IDLE ? -EAGAIN : 0; 1548 } else if (udc->ep0_req_shutdown) { 1549 udc->ep0_req_shutdown = 0; 1550 udc->ep0_req_completed = 0; 1551 udc->ep0_request = NULL; 1552 iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]); 1553 usb_gadget_unmap_request(&udc->gadget, 1554 &udc->ep0_ctrl_req.req, 0); 1555 1556 /* bcm63xx_udc_pullup() is waiting for this */ 1557 mb(); 1558 udc->ep0state = EP0_SHUTDOWN; 1559 } else if (udc->ep0_reply) { 1560 /* 1561 * This could happen if a USB RESET shows up during an ep0 1562 * transaction (especially if a laggy driver like gadgetfs 1563 * is in use). 1564 */ 1565 dev_warn(udc->dev, "nuking unexpected reply\n"); 1566 bcm63xx_ep0_nuke_reply(udc, 0); 1567 } else { 1568 return -EAGAIN; 1569 } 1570 1571 return 0; 1572 } 1573 1574 /** 1575 * bcm63xx_ep0_one_round - Handle the current ep0 state. 1576 * @udc: Reference to the device controller. 1577 * 1578 * Returns 0 if work was done; -EAGAIN if nothing to do. 1579 */ 1580 static int bcm63xx_ep0_one_round(struct bcm63xx_udc *udc) 1581 { 1582 enum bcm63xx_ep0_state ep0state = udc->ep0state; 1583 bool shutdown = udc->ep0_req_reset || udc->ep0_req_shutdown; 1584 1585 switch (udc->ep0state) { 1586 case EP0_REQUEUE: 1587 /* set up descriptor to receive SETUP packet */ 1588 bcm63xx_ep0_internal_request(udc, IUDMA_EP0_RXCHAN, 1589 BCM63XX_MAX_CTRL_PKT); 1590 ep0state = EP0_IDLE; 1591 break; 1592 case EP0_IDLE: 1593 return bcm63xx_ep0_do_idle(udc); 1594 case EP0_IN_DATA_PHASE_SETUP: 1595 /* 1596 * Normal case: TX request is in ep0_reply (queued by the 1597 * callback), or will be queued shortly. When it's here, 1598 * send it to the HW and go to EP0_IN_DATA_PHASE_COMPLETE. 1599 * 1600 * Shutdown case: Stop waiting for the reply. Just 1601 * REQUEUE->IDLE. The gadget driver is NOT expected to 1602 * queue anything else now. 1603 */ 1604 if (udc->ep0_reply) { 1605 bcm63xx_ep0_map_write(udc, IUDMA_EP0_TXCHAN, 1606 udc->ep0_reply); 1607 ep0state = EP0_IN_DATA_PHASE_COMPLETE; 1608 } else if (shutdown) { 1609 ep0state = EP0_REQUEUE; 1610 } 1611 break; 1612 case EP0_IN_DATA_PHASE_COMPLETE: { 1613 /* 1614 * Normal case: TX packet (ep0_reply) is in flight; wait for 1615 * it to finish, then go back to REQUEUE->IDLE. 1616 * 1617 * Shutdown case: Reset the TX channel, send -ESHUTDOWN 1618 * completion to the gadget driver, then REQUEUE->IDLE. 1619 */ 1620 if (udc->ep0_req_completed) { 1621 udc->ep0_reply = NULL; 1622 bcm63xx_ep0_read_complete(udc); 1623 /* 1624 * the "ack" sometimes gets eaten (see 1625 * bcm63xx_ep0_do_idle) 1626 */ 1627 ep0state = EP0_REQUEUE; 1628 } else if (shutdown) { 1629 iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]); 1630 bcm63xx_ep0_nuke_reply(udc, 1); 1631 ep0state = EP0_REQUEUE; 1632 } 1633 break; 1634 } 1635 case EP0_OUT_DATA_PHASE_SETUP: 1636 /* Similar behavior to EP0_IN_DATA_PHASE_SETUP */ 1637 if (udc->ep0_reply) { 1638 bcm63xx_ep0_map_write(udc, IUDMA_EP0_RXCHAN, 1639 udc->ep0_reply); 1640 ep0state = EP0_OUT_DATA_PHASE_COMPLETE; 1641 } else if (shutdown) { 1642 ep0state = EP0_REQUEUE; 1643 } 1644 break; 1645 case EP0_OUT_DATA_PHASE_COMPLETE: { 1646 /* Similar behavior to EP0_IN_DATA_PHASE_COMPLETE */ 1647 if (udc->ep0_req_completed) { 1648 udc->ep0_reply = NULL; 1649 bcm63xx_ep0_read_complete(udc); 1650 1651 /* send 0-byte ack to host */ 1652 bcm63xx_ep0_internal_request(udc, IUDMA_EP0_TXCHAN, 0); 1653 ep0state = EP0_OUT_STATUS_PHASE; 1654 } else if (shutdown) { 1655 iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]); 1656 bcm63xx_ep0_nuke_reply(udc, 0); 1657 ep0state = EP0_REQUEUE; 1658 } 1659 break; 1660 } 1661 case EP0_OUT_STATUS_PHASE: 1662 /* 1663 * Normal case: 0-byte OUT ack packet is in flight; wait 1664 * for it to finish, then go back to REQUEUE->IDLE. 1665 * 1666 * Shutdown case: just cancel the transmission. Don't bother 1667 * calling the completion, because it originated from this 1668 * function anyway. Then go back to REQUEUE->IDLE. 1669 */ 1670 if (udc->ep0_req_completed) { 1671 bcm63xx_ep0_read_complete(udc); 1672 ep0state = EP0_REQUEUE; 1673 } else if (shutdown) { 1674 iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]); 1675 udc->ep0_request = NULL; 1676 ep0state = EP0_REQUEUE; 1677 } 1678 break; 1679 case EP0_IN_FAKE_STATUS_PHASE: { 1680 /* 1681 * Normal case: we spoofed a SETUP packet and are now 1682 * waiting for the gadget driver to send a 0-byte reply. 1683 * This doesn't actually get sent to the HW because the 1684 * HW has already sent its own reply. Once we get the 1685 * response, return to IDLE. 1686 * 1687 * Shutdown case: return to IDLE immediately. 1688 * 1689 * Note that the ep0 RX descriptor has remained queued 1690 * (and possibly unfilled) during this entire transaction. 1691 * The HW datapath (IUDMA) never even sees SET_CONFIGURATION 1692 * or SET_INTERFACE transactions. 1693 */ 1694 struct usb_request *r = udc->ep0_reply; 1695 1696 if (!r) { 1697 if (shutdown) 1698 ep0state = EP0_IDLE; 1699 break; 1700 } 1701 1702 bcm63xx_ep0_complete(udc, r, 0); 1703 udc->ep0_reply = NULL; 1704 ep0state = EP0_IDLE; 1705 break; 1706 } 1707 case EP0_SHUTDOWN: 1708 break; 1709 } 1710 1711 if (udc->ep0state == ep0state) 1712 return -EAGAIN; 1713 1714 udc->ep0state = ep0state; 1715 return 0; 1716 } 1717 1718 /** 1719 * bcm63xx_ep0_process - ep0 worker thread / state machine. 1720 * @w: Workqueue struct. 1721 * 1722 * bcm63xx_ep0_process is triggered any time an event occurs on ep0. It 1723 * is used to synchronize ep0 events and ensure that both HW and SW events 1724 * occur in a well-defined order. When the ep0 IUDMA queues are idle, it may 1725 * synthesize SET_CONFIGURATION / SET_INTERFACE requests that were consumed 1726 * by the USBD hardware. 1727 * 1728 * The worker function will continue iterating around the state machine 1729 * until there is nothing left to do. Usually "nothing left to do" means 1730 * that we're waiting for a new event from the hardware. 1731 */ 1732 static void bcm63xx_ep0_process(struct work_struct *w) 1733 { 1734 struct bcm63xx_udc *udc = container_of(w, struct bcm63xx_udc, ep0_wq); 1735 spin_lock_irq(&udc->lock); 1736 while (bcm63xx_ep0_one_round(udc) == 0) 1737 ; 1738 spin_unlock_irq(&udc->lock); 1739 } 1740 1741 /*********************************************************************** 1742 * Standard UDC gadget operations 1743 ***********************************************************************/ 1744 1745 /** 1746 * bcm63xx_udc_get_frame - Read current SOF frame number from the HW. 1747 * @gadget: USB device. 1748 */ 1749 static int bcm63xx_udc_get_frame(struct usb_gadget *gadget) 1750 { 1751 struct bcm63xx_udc *udc = gadget_to_udc(gadget); 1752 1753 return (usbd_readl(udc, USBD_STATUS_REG) & 1754 USBD_STATUS_SOF_MASK) >> USBD_STATUS_SOF_SHIFT; 1755 } 1756 1757 /** 1758 * bcm63xx_udc_pullup - Enable/disable pullup on D+ line. 1759 * @gadget: USB device. 1760 * @is_on: 0 to disable pullup, 1 to enable. 1761 * 1762 * See notes in bcm63xx_select_pullup(). 1763 */ 1764 static int bcm63xx_udc_pullup(struct usb_gadget *gadget, int is_on) 1765 { 1766 struct bcm63xx_udc *udc = gadget_to_udc(gadget); 1767 unsigned long flags; 1768 int i, rc = -EINVAL; 1769 1770 spin_lock_irqsave(&udc->lock, flags); 1771 if (is_on && udc->ep0state == EP0_SHUTDOWN) { 1772 udc->gadget.speed = USB_SPEED_UNKNOWN; 1773 udc->ep0state = EP0_REQUEUE; 1774 bcm63xx_fifo_setup(udc); 1775 bcm63xx_fifo_reset(udc); 1776 bcm63xx_ep_setup(udc); 1777 1778 bitmap_zero(&udc->wedgemap, BCM63XX_NUM_EP); 1779 for (i = 0; i < BCM63XX_NUM_EP; i++) 1780 bcm63xx_set_stall(udc, &udc->bep[i], false); 1781 1782 bcm63xx_set_ctrl_irqs(udc, true); 1783 bcm63xx_select_pullup(gadget_to_udc(gadget), true); 1784 rc = 0; 1785 } else if (!is_on && udc->ep0state != EP0_SHUTDOWN) { 1786 bcm63xx_select_pullup(gadget_to_udc(gadget), false); 1787 1788 udc->ep0_req_shutdown = 1; 1789 spin_unlock_irqrestore(&udc->lock, flags); 1790 1791 while (1) { 1792 schedule_work(&udc->ep0_wq); 1793 if (udc->ep0state == EP0_SHUTDOWN) 1794 break; 1795 msleep(50); 1796 } 1797 bcm63xx_set_ctrl_irqs(udc, false); 1798 cancel_work_sync(&udc->ep0_wq); 1799 return 0; 1800 } 1801 1802 spin_unlock_irqrestore(&udc->lock, flags); 1803 return rc; 1804 } 1805 1806 /** 1807 * bcm63xx_udc_start - Start the controller. 1808 * @gadget: USB device. 1809 * @driver: Driver for USB device. 1810 */ 1811 static int bcm63xx_udc_start(struct usb_gadget *gadget, 1812 struct usb_gadget_driver *driver) 1813 { 1814 struct bcm63xx_udc *udc = gadget_to_udc(gadget); 1815 unsigned long flags; 1816 1817 if (!driver || driver->max_speed < USB_SPEED_HIGH || 1818 !driver->setup) 1819 return -EINVAL; 1820 if (!udc) 1821 return -ENODEV; 1822 if (udc->driver) 1823 return -EBUSY; 1824 1825 spin_lock_irqsave(&udc->lock, flags); 1826 1827 set_clocks(udc, true); 1828 bcm63xx_fifo_setup(udc); 1829 bcm63xx_ep_init(udc); 1830 bcm63xx_ep_setup(udc); 1831 bcm63xx_fifo_reset(udc); 1832 bcm63xx_select_phy_mode(udc, true); 1833 1834 udc->driver = driver; 1835 driver->driver.bus = NULL; 1836 udc->gadget.dev.of_node = udc->dev->of_node; 1837 1838 spin_unlock_irqrestore(&udc->lock, flags); 1839 1840 return 0; 1841 } 1842 1843 /** 1844 * bcm63xx_udc_stop - Shut down the controller. 1845 * @gadget: USB device. 1846 * @driver: Driver for USB device. 1847 */ 1848 static int bcm63xx_udc_stop(struct usb_gadget *gadget) 1849 { 1850 struct bcm63xx_udc *udc = gadget_to_udc(gadget); 1851 unsigned long flags; 1852 1853 spin_lock_irqsave(&udc->lock, flags); 1854 1855 udc->driver = NULL; 1856 1857 /* 1858 * If we switch the PHY too abruptly after dropping D+, the host 1859 * will often complain: 1860 * 1861 * hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling... 1862 */ 1863 msleep(100); 1864 1865 bcm63xx_select_phy_mode(udc, false); 1866 set_clocks(udc, false); 1867 1868 spin_unlock_irqrestore(&udc->lock, flags); 1869 1870 return 0; 1871 } 1872 1873 static const struct usb_gadget_ops bcm63xx_udc_ops = { 1874 .get_frame = bcm63xx_udc_get_frame, 1875 .pullup = bcm63xx_udc_pullup, 1876 .udc_start = bcm63xx_udc_start, 1877 .udc_stop = bcm63xx_udc_stop, 1878 }; 1879 1880 /*********************************************************************** 1881 * IRQ handling 1882 ***********************************************************************/ 1883 1884 /** 1885 * bcm63xx_update_cfg_iface - Read current configuration/interface settings. 1886 * @udc: Reference to the device controller. 1887 * 1888 * This controller intercepts SET_CONFIGURATION and SET_INTERFACE messages. 1889 * The driver never sees the raw control packets coming in on the ep0 1890 * IUDMA channel, but at least we get an interrupt event to tell us that 1891 * new values are waiting in the USBD_STATUS register. 1892 */ 1893 static void bcm63xx_update_cfg_iface(struct bcm63xx_udc *udc) 1894 { 1895 u32 reg = usbd_readl(udc, USBD_STATUS_REG); 1896 1897 udc->cfg = (reg & USBD_STATUS_CFG_MASK) >> USBD_STATUS_CFG_SHIFT; 1898 udc->iface = (reg & USBD_STATUS_INTF_MASK) >> USBD_STATUS_INTF_SHIFT; 1899 udc->alt_iface = (reg & USBD_STATUS_ALTINTF_MASK) >> 1900 USBD_STATUS_ALTINTF_SHIFT; 1901 bcm63xx_ep_setup(udc); 1902 } 1903 1904 /** 1905 * bcm63xx_update_link_speed - Check to see if the link speed has changed. 1906 * @udc: Reference to the device controller. 1907 * 1908 * The link speed update coincides with a SETUP IRQ. Returns 1 if the 1909 * speed has changed, so that the caller can update the endpoint settings. 1910 */ 1911 static int bcm63xx_update_link_speed(struct bcm63xx_udc *udc) 1912 { 1913 u32 reg = usbd_readl(udc, USBD_STATUS_REG); 1914 enum usb_device_speed oldspeed = udc->gadget.speed; 1915 1916 switch ((reg & USBD_STATUS_SPD_MASK) >> USBD_STATUS_SPD_SHIFT) { 1917 case BCM63XX_SPD_HIGH: 1918 udc->gadget.speed = USB_SPEED_HIGH; 1919 break; 1920 case BCM63XX_SPD_FULL: 1921 udc->gadget.speed = USB_SPEED_FULL; 1922 break; 1923 default: 1924 /* this should never happen */ 1925 udc->gadget.speed = USB_SPEED_UNKNOWN; 1926 dev_err(udc->dev, 1927 "received SETUP packet with invalid link speed\n"); 1928 return 0; 1929 } 1930 1931 if (udc->gadget.speed != oldspeed) { 1932 dev_info(udc->dev, "link up, %s-speed mode\n", 1933 udc->gadget.speed == USB_SPEED_HIGH ? "high" : "full"); 1934 return 1; 1935 } else { 1936 return 0; 1937 } 1938 } 1939 1940 /** 1941 * bcm63xx_update_wedge - Iterate through wedged endpoints. 1942 * @udc: Reference to the device controller. 1943 * @new_status: true to "refresh" wedge status; false to clear it. 1944 * 1945 * On a SETUP interrupt, we need to manually "refresh" the wedge status 1946 * because the controller hardware is designed to automatically clear 1947 * stalls in response to a CLEAR_FEATURE request from the host. 1948 * 1949 * On a RESET interrupt, we do want to restore all wedged endpoints. 1950 */ 1951 static void bcm63xx_update_wedge(struct bcm63xx_udc *udc, bool new_status) 1952 { 1953 int i; 1954 1955 for_each_set_bit(i, &udc->wedgemap, BCM63XX_NUM_EP) { 1956 bcm63xx_set_stall(udc, &udc->bep[i], new_status); 1957 if (!new_status) 1958 clear_bit(i, &udc->wedgemap); 1959 } 1960 } 1961 1962 /** 1963 * bcm63xx_udc_ctrl_isr - ISR for control path events (USBD). 1964 * @irq: IRQ number (unused). 1965 * @dev_id: Reference to the device controller. 1966 * 1967 * This is where we handle link (VBUS) down, USB reset, speed changes, 1968 * SET_CONFIGURATION, and SET_INTERFACE events. 1969 */ 1970 static irqreturn_t bcm63xx_udc_ctrl_isr(int irq, void *dev_id) 1971 { 1972 struct bcm63xx_udc *udc = dev_id; 1973 u32 stat; 1974 bool disconnected = false, bus_reset = false; 1975 1976 stat = usbd_readl(udc, USBD_EVENT_IRQ_STATUS_REG) & 1977 usbd_readl(udc, USBD_EVENT_IRQ_MASK_REG); 1978 1979 usbd_writel(udc, stat, USBD_EVENT_IRQ_STATUS_REG); 1980 1981 spin_lock(&udc->lock); 1982 if (stat & BIT(USBD_EVENT_IRQ_USB_LINK)) { 1983 /* VBUS toggled */ 1984 1985 if (!(usbd_readl(udc, USBD_EVENTS_REG) & 1986 USBD_EVENTS_USB_LINK_MASK) && 1987 udc->gadget.speed != USB_SPEED_UNKNOWN) 1988 dev_info(udc->dev, "link down\n"); 1989 1990 udc->gadget.speed = USB_SPEED_UNKNOWN; 1991 disconnected = true; 1992 } 1993 if (stat & BIT(USBD_EVENT_IRQ_USB_RESET)) { 1994 bcm63xx_fifo_setup(udc); 1995 bcm63xx_fifo_reset(udc); 1996 bcm63xx_ep_setup(udc); 1997 1998 bcm63xx_update_wedge(udc, false); 1999 2000 udc->ep0_req_reset = 1; 2001 schedule_work(&udc->ep0_wq); 2002 bus_reset = true; 2003 } 2004 if (stat & BIT(USBD_EVENT_IRQ_SETUP)) { 2005 if (bcm63xx_update_link_speed(udc)) { 2006 bcm63xx_fifo_setup(udc); 2007 bcm63xx_ep_setup(udc); 2008 } 2009 bcm63xx_update_wedge(udc, true); 2010 } 2011 if (stat & BIT(USBD_EVENT_IRQ_SETCFG)) { 2012 bcm63xx_update_cfg_iface(udc); 2013 udc->ep0_req_set_cfg = 1; 2014 schedule_work(&udc->ep0_wq); 2015 } 2016 if (stat & BIT(USBD_EVENT_IRQ_SETINTF)) { 2017 bcm63xx_update_cfg_iface(udc); 2018 udc->ep0_req_set_iface = 1; 2019 schedule_work(&udc->ep0_wq); 2020 } 2021 spin_unlock(&udc->lock); 2022 2023 if (disconnected && udc->driver) 2024 udc->driver->disconnect(&udc->gadget); 2025 else if (bus_reset && udc->driver) 2026 usb_gadget_udc_reset(&udc->gadget, udc->driver); 2027 2028 return IRQ_HANDLED; 2029 } 2030 2031 /** 2032 * bcm63xx_udc_data_isr - ISR for data path events (IUDMA). 2033 * @irq: IRQ number (unused). 2034 * @dev_id: Reference to the IUDMA channel that generated the interrupt. 2035 * 2036 * For the two ep0 channels, we have special handling that triggers the 2037 * ep0 worker thread. For normal bulk/intr channels, either queue up 2038 * the next buffer descriptor for the transaction (incomplete transaction), 2039 * or invoke the completion callback (complete transactions). 2040 */ 2041 static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id) 2042 { 2043 struct iudma_ch *iudma = dev_id; 2044 struct bcm63xx_udc *udc = iudma->udc; 2045 struct bcm63xx_ep *bep; 2046 struct usb_request *req = NULL; 2047 struct bcm63xx_req *breq = NULL; 2048 int rc; 2049 bool is_done = false; 2050 2051 spin_lock(&udc->lock); 2052 2053 usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, 2054 ENETDMAC_IR_REG, iudma->ch_idx); 2055 bep = iudma->bep; 2056 rc = iudma_read(udc, iudma); 2057 2058 /* special handling for EP0 RX (0) and TX (1) */ 2059 if (iudma->ch_idx == IUDMA_EP0_RXCHAN || 2060 iudma->ch_idx == IUDMA_EP0_TXCHAN) { 2061 req = udc->ep0_request; 2062 breq = our_req(req); 2063 2064 /* a single request could require multiple submissions */ 2065 if (rc >= 0) { 2066 req->actual += rc; 2067 2068 if (req->actual >= req->length || breq->bd_bytes > rc) { 2069 udc->ep0_req_completed = 1; 2070 is_done = true; 2071 schedule_work(&udc->ep0_wq); 2072 2073 /* "actual" on a ZLP is 1 byte */ 2074 req->actual = min(req->actual, req->length); 2075 } else { 2076 /* queue up the next BD (same request) */ 2077 iudma_write(udc, iudma, breq); 2078 } 2079 } 2080 } else if (!list_empty(&bep->queue)) { 2081 breq = list_first_entry(&bep->queue, struct bcm63xx_req, queue); 2082 req = &breq->req; 2083 2084 if (rc >= 0) { 2085 req->actual += rc; 2086 2087 if (req->actual >= req->length || breq->bd_bytes > rc) { 2088 is_done = true; 2089 list_del(&breq->queue); 2090 2091 req->actual = min(req->actual, req->length); 2092 2093 if (!list_empty(&bep->queue)) { 2094 struct bcm63xx_req *next; 2095 2096 next = list_first_entry(&bep->queue, 2097 struct bcm63xx_req, queue); 2098 iudma_write(udc, iudma, next); 2099 } 2100 } else { 2101 iudma_write(udc, iudma, breq); 2102 } 2103 } 2104 } 2105 spin_unlock(&udc->lock); 2106 2107 if (is_done) { 2108 usb_gadget_unmap_request(&udc->gadget, req, iudma->is_tx); 2109 if (req->complete) 2110 req->complete(&bep->ep, req); 2111 } 2112 2113 return IRQ_HANDLED; 2114 } 2115 2116 /*********************************************************************** 2117 * Debug filesystem 2118 ***********************************************************************/ 2119 2120 /* 2121 * bcm63xx_usbd_dbg_show - Show USBD controller state. 2122 * @s: seq_file to which the information will be written. 2123 * @p: Unused. 2124 * 2125 * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/usbd 2126 */ 2127 static int bcm63xx_usbd_dbg_show(struct seq_file *s, void *p) 2128 { 2129 struct bcm63xx_udc *udc = s->private; 2130 2131 if (!udc->driver) 2132 return -ENODEV; 2133 2134 seq_printf(s, "ep0 state: %s\n", 2135 bcm63xx_ep0_state_names[udc->ep0state]); 2136 seq_printf(s, " pending requests: %s%s%s%s%s%s%s\n", 2137 udc->ep0_req_reset ? "reset " : "", 2138 udc->ep0_req_set_cfg ? "set_cfg " : "", 2139 udc->ep0_req_set_iface ? "set_iface " : "", 2140 udc->ep0_req_shutdown ? "shutdown " : "", 2141 udc->ep0_request ? "pending " : "", 2142 udc->ep0_req_completed ? "completed " : "", 2143 udc->ep0_reply ? "reply " : ""); 2144 seq_printf(s, "cfg: %d; iface: %d; alt_iface: %d\n", 2145 udc->cfg, udc->iface, udc->alt_iface); 2146 seq_printf(s, "regs:\n"); 2147 seq_printf(s, " control: %08x; straps: %08x; status: %08x\n", 2148 usbd_readl(udc, USBD_CONTROL_REG), 2149 usbd_readl(udc, USBD_STRAPS_REG), 2150 usbd_readl(udc, USBD_STATUS_REG)); 2151 seq_printf(s, " events: %08x; stall: %08x\n", 2152 usbd_readl(udc, USBD_EVENTS_REG), 2153 usbd_readl(udc, USBD_STALL_REG)); 2154 2155 return 0; 2156 } 2157 DEFINE_SHOW_ATTRIBUTE(bcm63xx_usbd_dbg); 2158 2159 /* 2160 * bcm63xx_iudma_dbg_show - Show IUDMA status and descriptors. 2161 * @s: seq_file to which the information will be written. 2162 * @p: Unused. 2163 * 2164 * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/iudma 2165 */ 2166 static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p) 2167 { 2168 struct bcm63xx_udc *udc = s->private; 2169 int ch_idx, i; 2170 u32 sram2, sram3; 2171 2172 if (!udc->driver) 2173 return -ENODEV; 2174 2175 for (ch_idx = 0; ch_idx < BCM63XX_NUM_IUDMA; ch_idx++) { 2176 struct iudma_ch *iudma = &udc->iudma[ch_idx]; 2177 struct list_head *pos; 2178 2179 seq_printf(s, "IUDMA channel %d -- ", ch_idx); 2180 switch (iudma_defaults[ch_idx].ep_type) { 2181 case BCMEP_CTRL: 2182 seq_printf(s, "control"); 2183 break; 2184 case BCMEP_BULK: 2185 seq_printf(s, "bulk"); 2186 break; 2187 case BCMEP_INTR: 2188 seq_printf(s, "interrupt"); 2189 break; 2190 } 2191 seq_printf(s, ch_idx & 0x01 ? " tx" : " rx"); 2192 seq_printf(s, " [ep%d]:\n", 2193 max_t(int, iudma_defaults[ch_idx].ep_num, 0)); 2194 seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n", 2195 usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx), 2196 usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx), 2197 usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx), 2198 usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx)); 2199 2200 sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx); 2201 sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx); 2202 seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n", 2203 usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx), 2204 sram2 >> 16, sram2 & 0xffff, 2205 sram3 >> 16, sram3 & 0xffff, 2206 usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx)); 2207 seq_printf(s, " desc: %d/%d used", iudma->n_bds_used, 2208 iudma->n_bds); 2209 2210 if (iudma->bep) { 2211 i = 0; 2212 list_for_each(pos, &iudma->bep->queue) 2213 i++; 2214 seq_printf(s, "; %d queued\n", i); 2215 } else { 2216 seq_printf(s, "\n"); 2217 } 2218 2219 for (i = 0; i < iudma->n_bds; i++) { 2220 struct bcm_enet_desc *d = &iudma->bd_ring[i]; 2221 2222 seq_printf(s, " %03x (%02x): len_stat: %04x_%04x; pa %08x", 2223 i * sizeof(*d), i, 2224 d->len_stat >> 16, d->len_stat & 0xffff, 2225 d->address); 2226 if (d == iudma->read_bd) 2227 seq_printf(s, " <<RD"); 2228 if (d == iudma->write_bd) 2229 seq_printf(s, " <<WR"); 2230 seq_printf(s, "\n"); 2231 } 2232 2233 seq_printf(s, "\n"); 2234 } 2235 2236 return 0; 2237 } 2238 DEFINE_SHOW_ATTRIBUTE(bcm63xx_iudma_dbg); 2239 2240 /** 2241 * bcm63xx_udc_init_debugfs - Create debugfs entries. 2242 * @udc: Reference to the device controller. 2243 */ 2244 static void bcm63xx_udc_init_debugfs(struct bcm63xx_udc *udc) 2245 { 2246 struct dentry *root; 2247 2248 if (!IS_ENABLED(CONFIG_USB_GADGET_DEBUG_FS)) 2249 return; 2250 2251 root = debugfs_create_dir(udc->gadget.name, usb_debug_root); 2252 udc->debugfs_root = root; 2253 2254 debugfs_create_file("usbd", 0400, root, udc, &bcm63xx_usbd_dbg_fops); 2255 debugfs_create_file("iudma", 0400, root, udc, &bcm63xx_iudma_dbg_fops); 2256 } 2257 2258 /** 2259 * bcm63xx_udc_cleanup_debugfs - Remove debugfs entries. 2260 * @udc: Reference to the device controller. 2261 * 2262 * debugfs_remove() is safe to call with a NULL argument. 2263 */ 2264 static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc) 2265 { 2266 debugfs_remove_recursive(udc->debugfs_root); 2267 } 2268 2269 /*********************************************************************** 2270 * Driver init/exit 2271 ***********************************************************************/ 2272 2273 /** 2274 * bcm63xx_udc_probe - Initialize a new instance of the UDC. 2275 * @pdev: Platform device struct from the bcm63xx BSP code. 2276 * 2277 * Note that platform data is required, because pd.port_no varies from chip 2278 * to chip and is used to switch the correct USB port to device mode. 2279 */ 2280 static int bcm63xx_udc_probe(struct platform_device *pdev) 2281 { 2282 struct device *dev = &pdev->dev; 2283 struct bcm63xx_usbd_platform_data *pd = dev_get_platdata(dev); 2284 struct bcm63xx_udc *udc; 2285 int rc = -ENOMEM, i, irq; 2286 2287 udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL); 2288 if (!udc) 2289 return -ENOMEM; 2290 2291 platform_set_drvdata(pdev, udc); 2292 udc->dev = dev; 2293 udc->pd = pd; 2294 2295 if (!pd) { 2296 dev_err(dev, "missing platform data\n"); 2297 return -EINVAL; 2298 } 2299 2300 udc->usbd_regs = devm_platform_ioremap_resource(pdev, 0); 2301 if (IS_ERR(udc->usbd_regs)) 2302 return PTR_ERR(udc->usbd_regs); 2303 2304 udc->iudma_regs = devm_platform_ioremap_resource(pdev, 1); 2305 if (IS_ERR(udc->iudma_regs)) 2306 return PTR_ERR(udc->iudma_regs); 2307 2308 spin_lock_init(&udc->lock); 2309 INIT_WORK(&udc->ep0_wq, bcm63xx_ep0_process); 2310 2311 udc->gadget.ops = &bcm63xx_udc_ops; 2312 udc->gadget.name = dev_name(dev); 2313 2314 if (!pd->use_fullspeed && !use_fullspeed) 2315 udc->gadget.max_speed = USB_SPEED_HIGH; 2316 else 2317 udc->gadget.max_speed = USB_SPEED_FULL; 2318 2319 /* request clocks, allocate buffers, and clear any pending IRQs */ 2320 rc = bcm63xx_init_udc_hw(udc); 2321 if (rc) 2322 return rc; 2323 2324 rc = -ENXIO; 2325 2326 /* IRQ resource #0: control interrupt (VBUS, speed, etc.) */ 2327 irq = platform_get_irq(pdev, 0); 2328 if (irq < 0) 2329 goto out_uninit; 2330 if (devm_request_irq(dev, irq, &bcm63xx_udc_ctrl_isr, 0, 2331 dev_name(dev), udc) < 0) 2332 goto report_request_failure; 2333 2334 /* IRQ resources #1-6: data interrupts for IUDMA channels 0-5 */ 2335 for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { 2336 irq = platform_get_irq(pdev, i + 1); 2337 if (irq < 0) 2338 goto out_uninit; 2339 if (devm_request_irq(dev, irq, &bcm63xx_udc_data_isr, 0, 2340 dev_name(dev), &udc->iudma[i]) < 0) 2341 goto report_request_failure; 2342 } 2343 2344 bcm63xx_udc_init_debugfs(udc); 2345 rc = usb_add_gadget_udc(dev, &udc->gadget); 2346 if (!rc) 2347 return 0; 2348 2349 bcm63xx_udc_cleanup_debugfs(udc); 2350 out_uninit: 2351 bcm63xx_uninit_udc_hw(udc); 2352 return rc; 2353 2354 report_request_failure: 2355 dev_err(dev, "error requesting IRQ #%d\n", irq); 2356 goto out_uninit; 2357 } 2358 2359 /** 2360 * bcm63xx_udc_remove - Remove the device from the system. 2361 * @pdev: Platform device struct from the bcm63xx BSP code. 2362 */ 2363 static int bcm63xx_udc_remove(struct platform_device *pdev) 2364 { 2365 struct bcm63xx_udc *udc = platform_get_drvdata(pdev); 2366 2367 bcm63xx_udc_cleanup_debugfs(udc); 2368 usb_del_gadget_udc(&udc->gadget); 2369 BUG_ON(udc->driver); 2370 2371 bcm63xx_uninit_udc_hw(udc); 2372 2373 return 0; 2374 } 2375 2376 static struct platform_driver bcm63xx_udc_driver = { 2377 .probe = bcm63xx_udc_probe, 2378 .remove = bcm63xx_udc_remove, 2379 .driver = { 2380 .name = DRV_MODULE_NAME, 2381 }, 2382 }; 2383 module_platform_driver(bcm63xx_udc_driver); 2384 2385 MODULE_DESCRIPTION("BCM63xx USB Peripheral Controller"); 2386 MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>"); 2387 MODULE_LICENSE("GPL"); 2388 MODULE_ALIAS("platform:" DRV_MODULE_NAME); 2389