1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Driver for the Atmel USBA high speed USB device controller
4  *
5  * Copyright (C) 2005-2007 Atmel Corporation
6  */
7 #ifndef __LINUX_USB_GADGET_USBA_UDC_H__
8 #define __LINUX_USB_GADGET_USBA_UDC_H__
9 
10 #include <linux/gpio/consumer.h>
11 
12 /* USB register offsets */
13 #define USBA_CTRL				0x0000
14 #define USBA_FNUM				0x0004
15 #define USBA_INT_ENB				0x0010
16 #define USBA_INT_STA				0x0014
17 #define USBA_INT_CLR				0x0018
18 #define USBA_EPT_RST				0x001c
19 #define USBA_TST				0x00e0
20 
21 /* USB endpoint register offsets */
22 #define USBA_EPT_CFG				0x0000
23 #define USBA_EPT_CTL_ENB			0x0004
24 #define USBA_EPT_CTL_DIS			0x0008
25 #define USBA_EPT_CTL				0x000c
26 #define USBA_EPT_SET_STA			0x0014
27 #define USBA_EPT_CLR_STA			0x0018
28 #define USBA_EPT_STA				0x001c
29 
30 /* USB DMA register offsets */
31 #define USBA_DMA_NXT_DSC			0x0000
32 #define USBA_DMA_ADDRESS			0x0004
33 #define USBA_DMA_CONTROL			0x0008
34 #define USBA_DMA_STATUS				0x000c
35 
36 /* Bitfields in CTRL */
37 #define USBA_DEV_ADDR_OFFSET			0
38 #define USBA_DEV_ADDR_SIZE			7
39 #define USBA_FADDR_EN				(1 <<  7)
40 #define USBA_EN_USBA				(1 <<  8)
41 #define USBA_DETACH				(1 <<  9)
42 #define USBA_REMOTE_WAKE_UP			(1 << 10)
43 #define USBA_PULLD_DIS				(1 << 11)
44 
45 #define USBA_ENABLE_MASK			(USBA_EN_USBA | USBA_PULLD_DIS)
46 #define USBA_DISABLE_MASK			USBA_DETACH
47 
48 /* Bitfields in FNUM */
49 #define USBA_MICRO_FRAME_NUM_OFFSET		0
50 #define USBA_MICRO_FRAME_NUM_SIZE		3
51 #define USBA_FRAME_NUMBER_OFFSET		3
52 #define USBA_FRAME_NUMBER_SIZE			11
53 #define USBA_FRAME_NUM_ERROR			(1 << 31)
54 
55 /* Bitfields in INT_ENB/INT_STA/INT_CLR */
56 #define USBA_HIGH_SPEED				(1 <<  0)
57 #define USBA_DET_SUSPEND			(1 <<  1)
58 #define USBA_MICRO_SOF				(1 <<  2)
59 #define USBA_SOF				(1 <<  3)
60 #define USBA_END_OF_RESET			(1 <<  4)
61 #define USBA_WAKE_UP				(1 <<  5)
62 #define USBA_END_OF_RESUME			(1 <<  6)
63 #define USBA_UPSTREAM_RESUME			(1 <<  7)
64 #define USBA_EPT_INT_OFFSET			8
65 #define USBA_EPT_INT_SIZE			16
66 #define USBA_DMA_INT_OFFSET			24
67 #define USBA_DMA_INT_SIZE			8
68 
69 /* Bitfields in EPT_RST */
70 #define USBA_RST_OFFSET				0
71 #define USBA_RST_SIZE				16
72 
73 /* Bitfields in USBA_TST */
74 #define USBA_SPEED_CFG_OFFSET			0
75 #define USBA_SPEED_CFG_SIZE			2
76 #define USBA_TST_J_MODE				(1 <<  2)
77 #define USBA_TST_K_MODE				(1 <<  3)
78 #define USBA_TST_PKT_MODE			(1 <<  4)
79 #define USBA_OPMODE2				(1 <<  5)
80 
81 /* Bitfields in EPT_CFG */
82 #define USBA_EPT_SIZE_OFFSET			0
83 #define USBA_EPT_SIZE_SIZE			3
84 #define USBA_EPT_DIR_IN				(1 <<  3)
85 #define USBA_EPT_TYPE_OFFSET			4
86 #define USBA_EPT_TYPE_SIZE			2
87 #define USBA_BK_NUMBER_OFFSET			6
88 #define USBA_BK_NUMBER_SIZE			2
89 #define USBA_NB_TRANS_OFFSET			8
90 #define USBA_NB_TRANS_SIZE			2
91 #define USBA_EPT_MAPPED				(1 << 31)
92 
93 /* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
94 #define USBA_EPT_ENABLE				(1 <<  0)
95 #define USBA_AUTO_VALID				(1 <<  1)
96 #define USBA_INTDIS_DMA				(1 <<  3)
97 #define USBA_NYET_DIS				(1 <<  4)
98 #define USBA_DATAX_RX				(1 <<  6)
99 #define USBA_MDATA_RX				(1 <<  7)
100 /* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
101 #define USBA_BUSY_BANK_IE			(1 << 18)
102 
103 /* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
104 #define USBA_FORCE_STALL			(1 <<  5)
105 #define USBA_TOGGLE_CLR				(1 <<  6)
106 #define USBA_TOGGLE_SEQ_OFFSET			6
107 #define USBA_TOGGLE_SEQ_SIZE			2
108 #define USBA_ERR_OVFLW				(1 <<  8)
109 #define USBA_RX_BK_RDY				(1 <<  9)
110 #define USBA_KILL_BANK				(1 <<  9)
111 #define USBA_TX_COMPLETE			(1 << 10)
112 #define USBA_TX_PK_RDY				(1 << 11)
113 #define USBA_ISO_ERR_TRANS			(1 << 11)
114 #define USBA_RX_SETUP				(1 << 12)
115 #define USBA_ISO_ERR_FLOW			(1 << 12)
116 #define USBA_STALL_SENT				(1 << 13)
117 #define USBA_ISO_ERR_CRC			(1 << 13)
118 #define USBA_ISO_ERR_NBTRANS			(1 << 13)
119 #define USBA_NAK_IN				(1 << 14)
120 #define USBA_ISO_ERR_FLUSH			(1 << 14)
121 #define USBA_NAK_OUT				(1 << 15)
122 #define USBA_CURRENT_BANK_OFFSET		16
123 #define USBA_CURRENT_BANK_SIZE			2
124 #define USBA_BUSY_BANKS_OFFSET			18
125 #define USBA_BUSY_BANKS_SIZE			2
126 #define USBA_BYTE_COUNT_OFFSET			20
127 #define USBA_BYTE_COUNT_SIZE			11
128 #define USBA_SHORT_PACKET			(1 << 31)
129 
130 /* Bitfields in DMA_CONTROL */
131 #define USBA_DMA_CH_EN				(1 <<  0)
132 #define USBA_DMA_LINK				(1 <<  1)
133 #define USBA_DMA_END_TR_EN			(1 <<  2)
134 #define USBA_DMA_END_BUF_EN			(1 <<  3)
135 #define USBA_DMA_END_TR_IE			(1 <<  4)
136 #define USBA_DMA_END_BUF_IE			(1 <<  5)
137 #define USBA_DMA_DESC_LOAD_IE			(1 <<  6)
138 #define USBA_DMA_BURST_LOCK			(1 <<  7)
139 #define USBA_DMA_BUF_LEN_OFFSET			16
140 #define USBA_DMA_BUF_LEN_SIZE			16
141 
142 /* Bitfields in DMA_STATUS */
143 #define USBA_DMA_CH_ACTIVE			(1 <<  1)
144 #define USBA_DMA_END_TR_ST			(1 <<  4)
145 #define USBA_DMA_END_BUF_ST			(1 <<  5)
146 #define USBA_DMA_DESC_LOAD_ST			(1 <<  6)
147 
148 /* Constants for SPEED_CFG */
149 #define USBA_SPEED_CFG_NORMAL			0
150 #define USBA_SPEED_CFG_FORCE_HIGH		2
151 #define USBA_SPEED_CFG_FORCE_FULL		3
152 
153 /* Constants for EPT_SIZE */
154 #define USBA_EPT_SIZE_8				0
155 #define USBA_EPT_SIZE_16			1
156 #define USBA_EPT_SIZE_32			2
157 #define USBA_EPT_SIZE_64			3
158 #define USBA_EPT_SIZE_128			4
159 #define USBA_EPT_SIZE_256			5
160 #define USBA_EPT_SIZE_512			6
161 #define USBA_EPT_SIZE_1024			7
162 
163 /* Constants for EPT_TYPE */
164 #define USBA_EPT_TYPE_CONTROL			0
165 #define USBA_EPT_TYPE_ISO			1
166 #define USBA_EPT_TYPE_BULK			2
167 #define USBA_EPT_TYPE_INT			3
168 
169 /* Constants for BK_NUMBER */
170 #define USBA_BK_NUMBER_ZERO			0
171 #define USBA_BK_NUMBER_ONE			1
172 #define USBA_BK_NUMBER_DOUBLE			2
173 #define USBA_BK_NUMBER_TRIPLE			3
174 
175 /* Bit manipulation macros */
176 #define USBA_BF(name, value)					\
177 	(((value) & ((1 << USBA_##name##_SIZE) - 1))		\
178 	 << USBA_##name##_OFFSET)
179 #define USBA_BFEXT(name, value)					\
180 	(((value) >> USBA_##name##_OFFSET)			\
181 	 & ((1 << USBA_##name##_SIZE) - 1))
182 #define USBA_BFINS(name, value, old)				\
183 	(((old) & ~(((1 << USBA_##name##_SIZE) - 1)		\
184 		    << USBA_##name##_OFFSET))			\
185 	 | USBA_BF(name, value))
186 
187 /* Register access macros */
188 #define usba_readl(udc, reg)					\
189 	readl_relaxed((udc)->regs + USBA_##reg)
190 #define usba_writel(udc, reg, value)				\
191 	writel_relaxed((value), (udc)->regs + USBA_##reg)
192 #define usba_ep_readl(ep, reg)					\
193 	readl_relaxed((ep)->ep_regs + USBA_EPT_##reg)
194 #define usba_ep_writel(ep, reg, value)				\
195 	writel_relaxed((value), (ep)->ep_regs + USBA_EPT_##reg)
196 #define usba_dma_readl(ep, reg)					\
197 	readl_relaxed((ep)->dma_regs + USBA_DMA_##reg)
198 #define usba_dma_writel(ep, reg, value)				\
199 	writel_relaxed((value), (ep)->dma_regs + USBA_DMA_##reg)
200 
201 /* Calculate base address for a given endpoint or DMA controller */
202 #define USBA_EPT_BASE(x)	(0x100 + (x) * 0x20)
203 #define USBA_DMA_BASE(x)	(0x300 + (x) * 0x10)
204 #define USBA_FIFO_BASE(x)	((x) << 16)
205 
206 /* Synth parameters */
207 #define USBA_NR_DMAS		7
208 
209 #define EP0_FIFO_SIZE		64
210 #define EP0_EPT_SIZE		USBA_EPT_SIZE_64
211 #define EP0_NR_BANKS		1
212 
213 #define FIFO_IOMEM_ID	0
214 #define CTRL_IOMEM_ID	1
215 
216 #define DBG_ERR		0x0001	/* report all error returns */
217 #define DBG_HW		0x0002	/* debug hardware initialization */
218 #define DBG_GADGET	0x0004	/* calls to/from gadget driver */
219 #define DBG_INT		0x0008	/* interrupts */
220 #define DBG_BUS		0x0010	/* report changes in bus state */
221 #define DBG_QUEUE	0x0020  /* debug request queue processing */
222 #define DBG_FIFO	0x0040  /* debug FIFO contents */
223 #define DBG_DMA		0x0080  /* debug DMA handling */
224 #define DBG_REQ		0x0100	/* print out queued request length */
225 #define DBG_ALL		0xffff
226 #define DBG_NONE	0x0000
227 
228 #define DEBUG_LEVEL	(DBG_ERR)
229 
230 #define DBG(level, fmt, ...)					\
231 	do {							\
232 		if ((level) & DEBUG_LEVEL)			\
233 			pr_debug("udc: " fmt, ## __VA_ARGS__);	\
234 	} while (0)
235 
236 enum usba_ctrl_state {
237 	WAIT_FOR_SETUP,
238 	DATA_STAGE_IN,
239 	DATA_STAGE_OUT,
240 	STATUS_STAGE_IN,
241 	STATUS_STAGE_OUT,
242 	STATUS_STAGE_ADDR,
243 	STATUS_STAGE_TEST,
244 };
245 /*
246   EP_STATE_IDLE,
247   EP_STATE_SETUP,
248   EP_STATE_IN_DATA,
249   EP_STATE_OUT_DATA,
250   EP_STATE_SET_ADDR_STATUS,
251   EP_STATE_RX_STATUS,
252   EP_STATE_TX_STATUS,
253   EP_STATE_HALT,
254 */
255 
256 struct usba_dma_desc {
257 	dma_addr_t next;
258 	dma_addr_t addr;
259 	u32 ctrl;
260 };
261 
262 struct usba_fifo_cfg {
263 	u8			hw_ep_num;
264 	u16			fifo_size;
265 	u8			nr_banks;
266 };
267 
268 struct usba_ep {
269 	int					state;
270 	void __iomem				*ep_regs;
271 	void __iomem				*dma_regs;
272 	void __iomem				*fifo;
273 	char					name[8];
274 	struct usb_ep				ep;
275 	struct usba_udc				*udc;
276 
277 	struct list_head			queue;
278 
279 	u16					fifo_size;
280 	u8					nr_banks;
281 	u8					index;
282 	unsigned int				can_dma:1;
283 	unsigned int				can_isoc:1;
284 	unsigned int				is_isoc:1;
285 	unsigned int				is_in:1;
286 	unsigned long				ept_cfg;
287 #ifdef CONFIG_USB_GADGET_DEBUG_FS
288 	u32					last_dma_status;
289 	struct dentry				*debugfs_dir;
290 #endif
291 };
292 
293 struct usba_request {
294 	struct usb_request			req;
295 	struct list_head			queue;
296 
297 	u32					ctrl;
298 
299 	unsigned int				submitted:1;
300 	unsigned int				last_transaction:1;
301 	unsigned int				using_dma:1;
302 	unsigned int				mapped:1;
303 };
304 
305 struct usba_udc_errata {
306 	void (*toggle_bias)(struct usba_udc *udc, int is_on);
307 	void (*pulse_bias)(struct usba_udc *udc);
308 };
309 
310 struct usba_udc {
311 	/* Protect hw registers from concurrent modifications */
312 	spinlock_t lock;
313 
314 	/* Mutex to prevent concurrent start or stop */
315 	struct mutex vbus_mutex;
316 
317 	void __iomem *regs;
318 	void __iomem *fifo;
319 
320 	struct usb_gadget gadget;
321 	struct usb_gadget_driver *driver;
322 	struct platform_device *pdev;
323 	const struct usba_udc_errata *errata;
324 	int irq;
325 	struct gpio_desc *vbus_pin;
326 	int num_ep;
327 	int configured_ep;
328 	struct usba_fifo_cfg *fifo_cfg;
329 	struct clk *pclk;
330 	struct clk *hclk;
331 	struct usba_ep *usba_ep;
332 	bool bias_pulse_needed;
333 	bool clocked;
334 	bool suspended;
335 
336 	u16 devstatus;
337 
338 	u16 test_mode;
339 	int vbus_prev;
340 
341 	u32 int_enb_cache;
342 
343 #ifdef CONFIG_USB_GADGET_DEBUG_FS
344 	struct dentry *debugfs_root;
345 #endif
346 
347 	struct regmap *pmc;
348 };
349 
350 static inline struct usba_ep *to_usba_ep(struct usb_ep *ep)
351 {
352 	return container_of(ep, struct usba_ep, ep);
353 }
354 
355 static inline struct usba_request *to_usba_req(struct usb_request *req)
356 {
357 	return container_of(req, struct usba_request, req);
358 }
359 
360 static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget)
361 {
362 	return container_of(gadget, struct usba_udc, gadget);
363 }
364 
365 #define ep_is_control(ep)	((ep)->index == 0)
366 #define ep_is_idle(ep)		((ep)->state == EP_STATE_IDLE)
367 
368 #endif /* __LINUX_USB_GADGET_USBA_UDC_H */
369