1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Driver for the Atmel USBA high speed USB device controller 4 * 5 * Copyright (C) 2005-2007 Atmel Corporation 6 */ 7 #ifndef __LINUX_USB_GADGET_USBA_UDC_H__ 8 #define __LINUX_USB_GADGET_USBA_UDC_H__ 9 10 #include <linux/gpio/consumer.h> 11 12 /* USB register offsets */ 13 #define USBA_CTRL 0x0000 14 #define USBA_FNUM 0x0004 15 #define USBA_INT_ENB 0x0010 16 #define USBA_INT_STA 0x0014 17 #define USBA_INT_CLR 0x0018 18 #define USBA_EPT_RST 0x001c 19 #define USBA_TST 0x00e0 20 21 /* USB endpoint register offsets */ 22 #define USBA_EPT_CFG 0x0000 23 #define USBA_EPT_CTL_ENB 0x0004 24 #define USBA_EPT_CTL_DIS 0x0008 25 #define USBA_EPT_CTL 0x000c 26 #define USBA_EPT_SET_STA 0x0014 27 #define USBA_EPT_CLR_STA 0x0018 28 #define USBA_EPT_STA 0x001c 29 30 /* USB DMA register offsets */ 31 #define USBA_DMA_NXT_DSC 0x0000 32 #define USBA_DMA_ADDRESS 0x0004 33 #define USBA_DMA_CONTROL 0x0008 34 #define USBA_DMA_STATUS 0x000c 35 36 /* Bitfields in CTRL */ 37 #define USBA_DEV_ADDR_OFFSET 0 38 #define USBA_DEV_ADDR_SIZE 7 39 #define USBA_FADDR_EN (1 << 7) 40 #define USBA_EN_USBA (1 << 8) 41 #define USBA_DETACH (1 << 9) 42 #define USBA_REMOTE_WAKE_UP (1 << 10) 43 #define USBA_PULLD_DIS (1 << 11) 44 45 #define USBA_ENABLE_MASK (USBA_EN_USBA | USBA_PULLD_DIS) 46 #define USBA_DISABLE_MASK USBA_DETACH 47 48 /* Bitfields in FNUM */ 49 #define USBA_MICRO_FRAME_NUM_OFFSET 0 50 #define USBA_MICRO_FRAME_NUM_SIZE 3 51 #define USBA_FRAME_NUMBER_OFFSET 3 52 #define USBA_FRAME_NUMBER_SIZE 11 53 #define USBA_FRAME_NUM_ERROR (1 << 31) 54 55 /* Bitfields in INT_ENB/INT_STA/INT_CLR */ 56 #define USBA_HIGH_SPEED (1 << 0) 57 #define USBA_DET_SUSPEND (1 << 1) 58 #define USBA_MICRO_SOF (1 << 2) 59 #define USBA_SOF (1 << 3) 60 #define USBA_END_OF_RESET (1 << 4) 61 #define USBA_WAKE_UP (1 << 5) 62 #define USBA_END_OF_RESUME (1 << 6) 63 #define USBA_UPSTREAM_RESUME (1 << 7) 64 #define USBA_EPT_INT_OFFSET 8 65 #define USBA_EPT_INT_SIZE 16 66 #define USBA_DMA_INT_OFFSET 24 67 #define USBA_DMA_INT_SIZE 8 68 69 /* Bitfields in EPT_RST */ 70 #define USBA_RST_OFFSET 0 71 #define USBA_RST_SIZE 16 72 73 /* Bitfields in USBA_TST */ 74 #define USBA_SPEED_CFG_OFFSET 0 75 #define USBA_SPEED_CFG_SIZE 2 76 #define USBA_TST_J_MODE (1 << 2) 77 #define USBA_TST_K_MODE (1 << 3) 78 #define USBA_TST_PKT_MODE (1 << 4) 79 #define USBA_OPMODE2 (1 << 5) 80 81 /* Bitfields in EPT_CFG */ 82 #define USBA_EPT_SIZE_OFFSET 0 83 #define USBA_EPT_SIZE_SIZE 3 84 #define USBA_EPT_DIR_IN (1 << 3) 85 #define USBA_EPT_TYPE_OFFSET 4 86 #define USBA_EPT_TYPE_SIZE 2 87 #define USBA_BK_NUMBER_OFFSET 6 88 #define USBA_BK_NUMBER_SIZE 2 89 #define USBA_NB_TRANS_OFFSET 8 90 #define USBA_NB_TRANS_SIZE 2 91 #define USBA_EPT_MAPPED (1 << 31) 92 93 /* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */ 94 #define USBA_EPT_ENABLE (1 << 0) 95 #define USBA_AUTO_VALID (1 << 1) 96 #define USBA_INTDIS_DMA (1 << 3) 97 #define USBA_NYET_DIS (1 << 4) 98 #define USBA_DATAX_RX (1 << 6) 99 #define USBA_MDATA_RX (1 << 7) 100 /* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */ 101 #define USBA_BUSY_BANK_IE (1 << 18) 102 103 /* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */ 104 #define USBA_FORCE_STALL (1 << 5) 105 #define USBA_TOGGLE_CLR (1 << 6) 106 #define USBA_TOGGLE_SEQ_OFFSET 6 107 #define USBA_TOGGLE_SEQ_SIZE 2 108 #define USBA_ERR_OVFLW (1 << 8) 109 #define USBA_RX_BK_RDY (1 << 9) 110 #define USBA_KILL_BANK (1 << 9) 111 #define USBA_TX_COMPLETE (1 << 10) 112 #define USBA_TX_PK_RDY (1 << 11) 113 #define USBA_ISO_ERR_TRANS (1 << 11) 114 #define USBA_RX_SETUP (1 << 12) 115 #define USBA_ISO_ERR_FLOW (1 << 12) 116 #define USBA_STALL_SENT (1 << 13) 117 #define USBA_ISO_ERR_CRC (1 << 13) 118 #define USBA_ISO_ERR_NBTRANS (1 << 13) 119 #define USBA_NAK_IN (1 << 14) 120 #define USBA_ISO_ERR_FLUSH (1 << 14) 121 #define USBA_NAK_OUT (1 << 15) 122 #define USBA_CURRENT_BANK_OFFSET 16 123 #define USBA_CURRENT_BANK_SIZE 2 124 #define USBA_BUSY_BANKS_OFFSET 18 125 #define USBA_BUSY_BANKS_SIZE 2 126 #define USBA_BYTE_COUNT_OFFSET 20 127 #define USBA_BYTE_COUNT_SIZE 11 128 #define USBA_SHORT_PACKET (1 << 31) 129 130 /* Bitfields in DMA_CONTROL */ 131 #define USBA_DMA_CH_EN (1 << 0) 132 #define USBA_DMA_LINK (1 << 1) 133 #define USBA_DMA_END_TR_EN (1 << 2) 134 #define USBA_DMA_END_BUF_EN (1 << 3) 135 #define USBA_DMA_END_TR_IE (1 << 4) 136 #define USBA_DMA_END_BUF_IE (1 << 5) 137 #define USBA_DMA_DESC_LOAD_IE (1 << 6) 138 #define USBA_DMA_BURST_LOCK (1 << 7) 139 #define USBA_DMA_BUF_LEN_OFFSET 16 140 #define USBA_DMA_BUF_LEN_SIZE 16 141 142 /* Bitfields in DMA_STATUS */ 143 #define USBA_DMA_CH_ACTIVE (1 << 1) 144 #define USBA_DMA_END_TR_ST (1 << 4) 145 #define USBA_DMA_END_BUF_ST (1 << 5) 146 #define USBA_DMA_DESC_LOAD_ST (1 << 6) 147 148 /* Constants for SPEED_CFG */ 149 #define USBA_SPEED_CFG_NORMAL 0 150 #define USBA_SPEED_CFG_FORCE_HIGH 2 151 #define USBA_SPEED_CFG_FORCE_FULL 3 152 153 /* Constants for EPT_SIZE */ 154 #define USBA_EPT_SIZE_8 0 155 #define USBA_EPT_SIZE_16 1 156 #define USBA_EPT_SIZE_32 2 157 #define USBA_EPT_SIZE_64 3 158 #define USBA_EPT_SIZE_128 4 159 #define USBA_EPT_SIZE_256 5 160 #define USBA_EPT_SIZE_512 6 161 #define USBA_EPT_SIZE_1024 7 162 163 /* Constants for EPT_TYPE */ 164 #define USBA_EPT_TYPE_CONTROL 0 165 #define USBA_EPT_TYPE_ISO 1 166 #define USBA_EPT_TYPE_BULK 2 167 #define USBA_EPT_TYPE_INT 3 168 169 /* Constants for BK_NUMBER */ 170 #define USBA_BK_NUMBER_ZERO 0 171 #define USBA_BK_NUMBER_ONE 1 172 #define USBA_BK_NUMBER_DOUBLE 2 173 #define USBA_BK_NUMBER_TRIPLE 3 174 175 /* Bit manipulation macros */ 176 #define USBA_BF(name, value) \ 177 (((value) & ((1 << USBA_##name##_SIZE) - 1)) \ 178 << USBA_##name##_OFFSET) 179 #define USBA_BFEXT(name, value) \ 180 (((value) >> USBA_##name##_OFFSET) \ 181 & ((1 << USBA_##name##_SIZE) - 1)) 182 #define USBA_BFINS(name, value, old) \ 183 (((old) & ~(((1 << USBA_##name##_SIZE) - 1) \ 184 << USBA_##name##_OFFSET)) \ 185 | USBA_BF(name, value)) 186 187 /* Register access macros */ 188 #define usba_readl(udc, reg) \ 189 readl_relaxed((udc)->regs + USBA_##reg) 190 #define usba_writel(udc, reg, value) \ 191 writel_relaxed((value), (udc)->regs + USBA_##reg) 192 #define usba_ep_readl(ep, reg) \ 193 readl_relaxed((ep)->ep_regs + USBA_EPT_##reg) 194 #define usba_ep_writel(ep, reg, value) \ 195 writel_relaxed((value), (ep)->ep_regs + USBA_EPT_##reg) 196 #define usba_dma_readl(ep, reg) \ 197 readl_relaxed((ep)->dma_regs + USBA_DMA_##reg) 198 #define usba_dma_writel(ep, reg, value) \ 199 writel_relaxed((value), (ep)->dma_regs + USBA_DMA_##reg) 200 201 /* Calculate base address for a given endpoint or DMA controller */ 202 #define USBA_EPT_BASE(x) (0x100 + (x) * 0x20) 203 #define USBA_DMA_BASE(x) (0x300 + (x) * 0x10) 204 #define USBA_FIFO_BASE(x) ((x) << 16) 205 206 /* Synth parameters */ 207 #define USBA_NR_DMAS 7 208 209 #define EP0_FIFO_SIZE 64 210 #define EP0_EPT_SIZE USBA_EPT_SIZE_64 211 #define EP0_NR_BANKS 1 212 213 #define FIFO_IOMEM_ID 0 214 #define CTRL_IOMEM_ID 1 215 216 #define DBG_ERR 0x0001 /* report all error returns */ 217 #define DBG_HW 0x0002 /* debug hardware initialization */ 218 #define DBG_GADGET 0x0004 /* calls to/from gadget driver */ 219 #define DBG_INT 0x0008 /* interrupts */ 220 #define DBG_BUS 0x0010 /* report changes in bus state */ 221 #define DBG_QUEUE 0x0020 /* debug request queue processing */ 222 #define DBG_FIFO 0x0040 /* debug FIFO contents */ 223 #define DBG_DMA 0x0080 /* debug DMA handling */ 224 #define DBG_REQ 0x0100 /* print out queued request length */ 225 #define DBG_ALL 0xffff 226 #define DBG_NONE 0x0000 227 228 #define DEBUG_LEVEL (DBG_ERR) 229 230 #define DBG(level, fmt, ...) \ 231 do { \ 232 if ((level) & DEBUG_LEVEL) \ 233 pr_debug("udc: " fmt, ## __VA_ARGS__); \ 234 } while (0) 235 236 enum usba_ctrl_state { 237 WAIT_FOR_SETUP, 238 DATA_STAGE_IN, 239 DATA_STAGE_OUT, 240 STATUS_STAGE_IN, 241 STATUS_STAGE_OUT, 242 STATUS_STAGE_ADDR, 243 STATUS_STAGE_TEST, 244 }; 245 /* 246 EP_STATE_IDLE, 247 EP_STATE_SETUP, 248 EP_STATE_IN_DATA, 249 EP_STATE_OUT_DATA, 250 EP_STATE_SET_ADDR_STATUS, 251 EP_STATE_RX_STATUS, 252 EP_STATE_TX_STATUS, 253 EP_STATE_HALT, 254 */ 255 256 struct usba_dma_desc { 257 dma_addr_t next; 258 dma_addr_t addr; 259 u32 ctrl; 260 }; 261 262 struct usba_fifo_cfg { 263 u8 hw_ep_num; 264 u16 fifo_size; 265 u8 nr_banks; 266 }; 267 268 struct usba_ep { 269 int state; 270 void __iomem *ep_regs; 271 void __iomem *dma_regs; 272 void __iomem *fifo; 273 char name[8]; 274 struct usb_ep ep; 275 struct usba_udc *udc; 276 277 struct list_head queue; 278 279 u16 fifo_size; 280 u8 nr_banks; 281 u8 index; 282 unsigned int can_dma:1; 283 unsigned int can_isoc:1; 284 unsigned int is_isoc:1; 285 unsigned int is_in:1; 286 unsigned long ept_cfg; 287 #ifdef CONFIG_USB_GADGET_DEBUG_FS 288 u32 last_dma_status; 289 struct dentry *debugfs_dir; 290 #endif 291 }; 292 293 struct usba_request { 294 struct usb_request req; 295 struct list_head queue; 296 297 u32 ctrl; 298 299 unsigned int submitted:1; 300 unsigned int last_transaction:1; 301 unsigned int using_dma:1; 302 unsigned int mapped:1; 303 }; 304 305 struct usba_udc_errata { 306 void (*toggle_bias)(struct usba_udc *udc, int is_on); 307 void (*pulse_bias)(struct usba_udc *udc); 308 }; 309 310 struct usba_udc { 311 /* Protect hw registers from concurrent modifications */ 312 spinlock_t lock; 313 314 /* Mutex to prevent concurrent start or stop */ 315 struct mutex vbus_mutex; 316 317 void __iomem *regs; 318 void __iomem *fifo; 319 320 struct usb_gadget gadget; 321 struct usb_gadget_driver *driver; 322 struct platform_device *pdev; 323 const struct usba_udc_errata *errata; 324 int irq; 325 struct gpio_desc *vbus_pin; 326 int num_ep; 327 int configured_ep; 328 struct usba_fifo_cfg *fifo_cfg; 329 struct clk *pclk; 330 struct clk *hclk; 331 struct usba_ep *usba_ep; 332 bool bias_pulse_needed; 333 bool clocked; 334 335 u16 devstatus; 336 337 u16 test_mode; 338 int vbus_prev; 339 340 u32 int_enb_cache; 341 342 #ifdef CONFIG_USB_GADGET_DEBUG_FS 343 struct dentry *debugfs_root; 344 #endif 345 346 struct regmap *pmc; 347 }; 348 349 static inline struct usba_ep *to_usba_ep(struct usb_ep *ep) 350 { 351 return container_of(ep, struct usba_ep, ep); 352 } 353 354 static inline struct usba_request *to_usba_req(struct usb_request *req) 355 { 356 return container_of(req, struct usba_request, req); 357 } 358 359 static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget) 360 { 361 return container_of(gadget, struct usba_udc, gadget); 362 } 363 364 #define ep_is_control(ep) ((ep)->index == 0) 365 #define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE) 366 367 #endif /* __LINUX_USB_GADGET_USBA_UDC_H */ 368