1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Driver for the Atmel USBA high speed USB device controller 4 * 5 * Copyright (C) 2005-2007 Atmel Corporation 6 */ 7 #include <linux/clk.h> 8 #include <linux/clk/at91_pmc.h> 9 #include <linux/module.h> 10 #include <linux/init.h> 11 #include <linux/interrupt.h> 12 #include <linux/io.h> 13 #include <linux/slab.h> 14 #include <linux/device.h> 15 #include <linux/dma-mapping.h> 16 #include <linux/list.h> 17 #include <linux/mfd/syscon.h> 18 #include <linux/platform_device.h> 19 #include <linux/regmap.h> 20 #include <linux/ctype.h> 21 #include <linux/usb.h> 22 #include <linux/usb/ch9.h> 23 #include <linux/usb/gadget.h> 24 #include <linux/delay.h> 25 #include <linux/of.h> 26 #include <linux/irq.h> 27 #include <linux/gpio/consumer.h> 28 29 #include "atmel_usba_udc.h" 30 #define USBA_VBUS_IRQFLAGS (IRQF_ONESHOT \ 31 | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING) 32 33 #ifdef CONFIG_USB_GADGET_DEBUG_FS 34 #include <linux/debugfs.h> 35 #include <linux/uaccess.h> 36 37 static int queue_dbg_open(struct inode *inode, struct file *file) 38 { 39 struct usba_ep *ep = inode->i_private; 40 struct usba_request *req, *req_copy; 41 struct list_head *queue_data; 42 43 queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL); 44 if (!queue_data) 45 return -ENOMEM; 46 INIT_LIST_HEAD(queue_data); 47 48 spin_lock_irq(&ep->udc->lock); 49 list_for_each_entry(req, &ep->queue, queue) { 50 req_copy = kmemdup(req, sizeof(*req_copy), GFP_ATOMIC); 51 if (!req_copy) 52 goto fail; 53 list_add_tail(&req_copy->queue, queue_data); 54 } 55 spin_unlock_irq(&ep->udc->lock); 56 57 file->private_data = queue_data; 58 return 0; 59 60 fail: 61 spin_unlock_irq(&ep->udc->lock); 62 list_for_each_entry_safe(req, req_copy, queue_data, queue) { 63 list_del(&req->queue); 64 kfree(req); 65 } 66 kfree(queue_data); 67 return -ENOMEM; 68 } 69 70 /* 71 * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0 72 * 73 * b: buffer address 74 * l: buffer length 75 * I/i: interrupt/no interrupt 76 * Z/z: zero/no zero 77 * S/s: short ok/short not ok 78 * s: status 79 * n: nr_packets 80 * F/f: submitted/not submitted to FIFO 81 * D/d: using/not using DMA 82 * L/l: last transaction/not last transaction 83 */ 84 static ssize_t queue_dbg_read(struct file *file, char __user *buf, 85 size_t nbytes, loff_t *ppos) 86 { 87 struct list_head *queue = file->private_data; 88 struct usba_request *req, *tmp_req; 89 size_t len, remaining, actual = 0; 90 char tmpbuf[38]; 91 92 if (!access_ok(buf, nbytes)) 93 return -EFAULT; 94 95 inode_lock(file_inode(file)); 96 list_for_each_entry_safe(req, tmp_req, queue, queue) { 97 len = snprintf(tmpbuf, sizeof(tmpbuf), 98 "%8p %08x %c%c%c %5d %c%c%c\n", 99 req->req.buf, req->req.length, 100 req->req.no_interrupt ? 'i' : 'I', 101 req->req.zero ? 'Z' : 'z', 102 req->req.short_not_ok ? 's' : 'S', 103 req->req.status, 104 req->submitted ? 'F' : 'f', 105 req->using_dma ? 'D' : 'd', 106 req->last_transaction ? 'L' : 'l'); 107 len = min(len, sizeof(tmpbuf)); 108 if (len > nbytes) 109 break; 110 111 list_del(&req->queue); 112 kfree(req); 113 114 remaining = __copy_to_user(buf, tmpbuf, len); 115 actual += len - remaining; 116 if (remaining) 117 break; 118 119 nbytes -= len; 120 buf += len; 121 } 122 inode_unlock(file_inode(file)); 123 124 return actual; 125 } 126 127 static int queue_dbg_release(struct inode *inode, struct file *file) 128 { 129 struct list_head *queue_data = file->private_data; 130 struct usba_request *req, *tmp_req; 131 132 list_for_each_entry_safe(req, tmp_req, queue_data, queue) { 133 list_del(&req->queue); 134 kfree(req); 135 } 136 kfree(queue_data); 137 return 0; 138 } 139 140 static int regs_dbg_open(struct inode *inode, struct file *file) 141 { 142 struct usba_udc *udc; 143 unsigned int i; 144 u32 *data; 145 int ret = -ENOMEM; 146 147 inode_lock(inode); 148 udc = inode->i_private; 149 data = kmalloc(inode->i_size, GFP_KERNEL); 150 if (!data) 151 goto out; 152 153 spin_lock_irq(&udc->lock); 154 for (i = 0; i < inode->i_size / 4; i++) 155 data[i] = readl_relaxed(udc->regs + i * 4); 156 spin_unlock_irq(&udc->lock); 157 158 file->private_data = data; 159 ret = 0; 160 161 out: 162 inode_unlock(inode); 163 164 return ret; 165 } 166 167 static ssize_t regs_dbg_read(struct file *file, char __user *buf, 168 size_t nbytes, loff_t *ppos) 169 { 170 struct inode *inode = file_inode(file); 171 int ret; 172 173 inode_lock(inode); 174 ret = simple_read_from_buffer(buf, nbytes, ppos, 175 file->private_data, 176 file_inode(file)->i_size); 177 inode_unlock(inode); 178 179 return ret; 180 } 181 182 static int regs_dbg_release(struct inode *inode, struct file *file) 183 { 184 kfree(file->private_data); 185 return 0; 186 } 187 188 static const struct file_operations queue_dbg_fops = { 189 .owner = THIS_MODULE, 190 .open = queue_dbg_open, 191 .llseek = no_llseek, 192 .read = queue_dbg_read, 193 .release = queue_dbg_release, 194 }; 195 196 static const struct file_operations regs_dbg_fops = { 197 .owner = THIS_MODULE, 198 .open = regs_dbg_open, 199 .llseek = generic_file_llseek, 200 .read = regs_dbg_read, 201 .release = regs_dbg_release, 202 }; 203 204 static void usba_ep_init_debugfs(struct usba_udc *udc, 205 struct usba_ep *ep) 206 { 207 struct dentry *ep_root; 208 209 ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root); 210 ep->debugfs_dir = ep_root; 211 212 debugfs_create_file("queue", 0400, ep_root, ep, &queue_dbg_fops); 213 if (ep->can_dma) 214 debugfs_create_u32("dma_status", 0400, ep_root, 215 &ep->last_dma_status); 216 if (ep_is_control(ep)) 217 debugfs_create_u32("state", 0400, ep_root, &ep->state); 218 } 219 220 static void usba_ep_cleanup_debugfs(struct usba_ep *ep) 221 { 222 debugfs_remove_recursive(ep->debugfs_dir); 223 } 224 225 static void usba_init_debugfs(struct usba_udc *udc) 226 { 227 struct dentry *root; 228 struct resource *regs_resource; 229 230 root = debugfs_create_dir(udc->gadget.name, usb_debug_root); 231 udc->debugfs_root = root; 232 233 regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM, 234 CTRL_IOMEM_ID); 235 236 if (regs_resource) { 237 debugfs_create_file_size("regs", 0400, root, udc, 238 ®s_dbg_fops, 239 resource_size(regs_resource)); 240 } 241 242 usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0)); 243 } 244 245 static void usba_cleanup_debugfs(struct usba_udc *udc) 246 { 247 usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0)); 248 debugfs_remove_recursive(udc->debugfs_root); 249 } 250 #else 251 static inline void usba_ep_init_debugfs(struct usba_udc *udc, 252 struct usba_ep *ep) 253 { 254 255 } 256 257 static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep) 258 { 259 260 } 261 262 static inline void usba_init_debugfs(struct usba_udc *udc) 263 { 264 265 } 266 267 static inline void usba_cleanup_debugfs(struct usba_udc *udc) 268 { 269 270 } 271 #endif 272 273 static ushort fifo_mode; 274 275 module_param(fifo_mode, ushort, 0x0); 276 MODULE_PARM_DESC(fifo_mode, "Endpoint configuration mode"); 277 278 /* mode 0 - uses autoconfig */ 279 280 /* mode 1 - fits in 8KB, generic max fifo configuration */ 281 static struct usba_fifo_cfg mode_1_cfg[] = { 282 { .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, 283 { .hw_ep_num = 1, .fifo_size = 1024, .nr_banks = 2, }, 284 { .hw_ep_num = 2, .fifo_size = 1024, .nr_banks = 1, }, 285 { .hw_ep_num = 3, .fifo_size = 1024, .nr_banks = 1, }, 286 { .hw_ep_num = 4, .fifo_size = 1024, .nr_banks = 1, }, 287 { .hw_ep_num = 5, .fifo_size = 1024, .nr_banks = 1, }, 288 { .hw_ep_num = 6, .fifo_size = 1024, .nr_banks = 1, }, 289 }; 290 291 /* mode 2 - fits in 8KB, performance max fifo configuration */ 292 static struct usba_fifo_cfg mode_2_cfg[] = { 293 { .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, 294 { .hw_ep_num = 1, .fifo_size = 1024, .nr_banks = 3, }, 295 { .hw_ep_num = 2, .fifo_size = 1024, .nr_banks = 2, }, 296 { .hw_ep_num = 3, .fifo_size = 1024, .nr_banks = 2, }, 297 }; 298 299 /* mode 3 - fits in 8KB, mixed fifo configuration */ 300 static struct usba_fifo_cfg mode_3_cfg[] = { 301 { .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, 302 { .hw_ep_num = 1, .fifo_size = 1024, .nr_banks = 2, }, 303 { .hw_ep_num = 2, .fifo_size = 512, .nr_banks = 2, }, 304 { .hw_ep_num = 3, .fifo_size = 512, .nr_banks = 2, }, 305 { .hw_ep_num = 4, .fifo_size = 512, .nr_banks = 2, }, 306 { .hw_ep_num = 5, .fifo_size = 512, .nr_banks = 2, }, 307 { .hw_ep_num = 6, .fifo_size = 512, .nr_banks = 2, }, 308 }; 309 310 /* mode 4 - fits in 8KB, custom fifo configuration */ 311 static struct usba_fifo_cfg mode_4_cfg[] = { 312 { .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, 313 { .hw_ep_num = 1, .fifo_size = 512, .nr_banks = 2, }, 314 { .hw_ep_num = 2, .fifo_size = 512, .nr_banks = 2, }, 315 { .hw_ep_num = 3, .fifo_size = 8, .nr_banks = 2, }, 316 { .hw_ep_num = 4, .fifo_size = 512, .nr_banks = 2, }, 317 { .hw_ep_num = 5, .fifo_size = 512, .nr_banks = 2, }, 318 { .hw_ep_num = 6, .fifo_size = 16, .nr_banks = 2, }, 319 { .hw_ep_num = 7, .fifo_size = 8, .nr_banks = 2, }, 320 { .hw_ep_num = 8, .fifo_size = 8, .nr_banks = 2, }, 321 }; 322 /* Add additional configurations here */ 323 324 static int usba_config_fifo_table(struct usba_udc *udc) 325 { 326 int n; 327 328 switch (fifo_mode) { 329 default: 330 fifo_mode = 0; 331 fallthrough; 332 case 0: 333 udc->fifo_cfg = NULL; 334 n = 0; 335 break; 336 case 1: 337 udc->fifo_cfg = mode_1_cfg; 338 n = ARRAY_SIZE(mode_1_cfg); 339 break; 340 case 2: 341 udc->fifo_cfg = mode_2_cfg; 342 n = ARRAY_SIZE(mode_2_cfg); 343 break; 344 case 3: 345 udc->fifo_cfg = mode_3_cfg; 346 n = ARRAY_SIZE(mode_3_cfg); 347 break; 348 case 4: 349 udc->fifo_cfg = mode_4_cfg; 350 n = ARRAY_SIZE(mode_4_cfg); 351 break; 352 } 353 DBG(DBG_HW, "Setup fifo_mode %d\n", fifo_mode); 354 355 return n; 356 } 357 358 static inline u32 usba_int_enb_get(struct usba_udc *udc) 359 { 360 return udc->int_enb_cache; 361 } 362 363 static inline void usba_int_enb_set(struct usba_udc *udc, u32 mask) 364 { 365 u32 val; 366 367 val = udc->int_enb_cache | mask; 368 usba_writel(udc, INT_ENB, val); 369 udc->int_enb_cache = val; 370 } 371 372 static inline void usba_int_enb_clear(struct usba_udc *udc, u32 mask) 373 { 374 u32 val; 375 376 val = udc->int_enb_cache & ~mask; 377 usba_writel(udc, INT_ENB, val); 378 udc->int_enb_cache = val; 379 } 380 381 static int vbus_is_present(struct usba_udc *udc) 382 { 383 if (udc->vbus_pin) 384 return gpiod_get_value(udc->vbus_pin); 385 386 /* No Vbus detection: Assume always present */ 387 return 1; 388 } 389 390 static void toggle_bias(struct usba_udc *udc, int is_on) 391 { 392 if (udc->errata && udc->errata->toggle_bias) 393 udc->errata->toggle_bias(udc, is_on); 394 } 395 396 static void generate_bias_pulse(struct usba_udc *udc) 397 { 398 if (!udc->bias_pulse_needed) 399 return; 400 401 if (udc->errata && udc->errata->pulse_bias) 402 udc->errata->pulse_bias(udc); 403 404 udc->bias_pulse_needed = false; 405 } 406 407 static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req) 408 { 409 unsigned int transaction_len; 410 411 transaction_len = req->req.length - req->req.actual; 412 req->last_transaction = 1; 413 if (transaction_len > ep->ep.maxpacket) { 414 transaction_len = ep->ep.maxpacket; 415 req->last_transaction = 0; 416 } else if (transaction_len == ep->ep.maxpacket && req->req.zero) 417 req->last_transaction = 0; 418 419 DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n", 420 ep->ep.name, req, transaction_len, 421 req->last_transaction ? ", done" : ""); 422 423 memcpy_toio(ep->fifo, req->req.buf + req->req.actual, transaction_len); 424 usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); 425 req->req.actual += transaction_len; 426 } 427 428 static void submit_request(struct usba_ep *ep, struct usba_request *req) 429 { 430 DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n", 431 ep->ep.name, req, req->req.length); 432 433 req->req.actual = 0; 434 req->submitted = 1; 435 436 if (req->using_dma) { 437 if (req->req.length == 0) { 438 usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); 439 return; 440 } 441 442 if (req->req.zero) 443 usba_ep_writel(ep, CTL_ENB, USBA_SHORT_PACKET); 444 else 445 usba_ep_writel(ep, CTL_DIS, USBA_SHORT_PACKET); 446 447 usba_dma_writel(ep, ADDRESS, req->req.dma); 448 usba_dma_writel(ep, CONTROL, req->ctrl); 449 } else { 450 next_fifo_transaction(ep, req); 451 if (req->last_transaction) { 452 usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); 453 if (ep_is_control(ep)) 454 usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); 455 } else { 456 if (ep_is_control(ep)) 457 usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); 458 usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); 459 } 460 } 461 } 462 463 static void submit_next_request(struct usba_ep *ep) 464 { 465 struct usba_request *req; 466 467 if (list_empty(&ep->queue)) { 468 usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY); 469 return; 470 } 471 472 req = list_entry(ep->queue.next, struct usba_request, queue); 473 if (!req->submitted) 474 submit_request(ep, req); 475 } 476 477 static void send_status(struct usba_udc *udc, struct usba_ep *ep) 478 { 479 ep->state = STATUS_STAGE_IN; 480 usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); 481 usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); 482 } 483 484 static void receive_data(struct usba_ep *ep) 485 { 486 struct usba_udc *udc = ep->udc; 487 struct usba_request *req; 488 unsigned long status; 489 unsigned int bytecount, nr_busy; 490 int is_complete = 0; 491 492 status = usba_ep_readl(ep, STA); 493 nr_busy = USBA_BFEXT(BUSY_BANKS, status); 494 495 DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy); 496 497 while (nr_busy > 0) { 498 if (list_empty(&ep->queue)) { 499 usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); 500 break; 501 } 502 req = list_entry(ep->queue.next, 503 struct usba_request, queue); 504 505 bytecount = USBA_BFEXT(BYTE_COUNT, status); 506 507 if (status & (1 << 31)) 508 is_complete = 1; 509 if (req->req.actual + bytecount >= req->req.length) { 510 is_complete = 1; 511 bytecount = req->req.length - req->req.actual; 512 } 513 514 memcpy_fromio(req->req.buf + req->req.actual, 515 ep->fifo, bytecount); 516 req->req.actual += bytecount; 517 518 usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); 519 520 if (is_complete) { 521 DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name); 522 req->req.status = 0; 523 list_del_init(&req->queue); 524 usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); 525 spin_unlock(&udc->lock); 526 usb_gadget_giveback_request(&ep->ep, &req->req); 527 spin_lock(&udc->lock); 528 } 529 530 status = usba_ep_readl(ep, STA); 531 nr_busy = USBA_BFEXT(BUSY_BANKS, status); 532 533 if (is_complete && ep_is_control(ep)) { 534 send_status(udc, ep); 535 break; 536 } 537 } 538 } 539 540 static void 541 request_complete(struct usba_ep *ep, struct usba_request *req, int status) 542 { 543 struct usba_udc *udc = ep->udc; 544 545 WARN_ON(!list_empty(&req->queue)); 546 547 if (req->req.status == -EINPROGRESS) 548 req->req.status = status; 549 550 if (req->using_dma) 551 usb_gadget_unmap_request(&udc->gadget, &req->req, ep->is_in); 552 553 DBG(DBG_GADGET | DBG_REQ, 554 "%s: req %p complete: status %d, actual %u\n", 555 ep->ep.name, req, req->req.status, req->req.actual); 556 557 spin_unlock(&udc->lock); 558 usb_gadget_giveback_request(&ep->ep, &req->req); 559 spin_lock(&udc->lock); 560 } 561 562 static void 563 request_complete_list(struct usba_ep *ep, struct list_head *list, int status) 564 { 565 struct usba_request *req, *tmp_req; 566 567 list_for_each_entry_safe(req, tmp_req, list, queue) { 568 list_del_init(&req->queue); 569 request_complete(ep, req, status); 570 } 571 } 572 573 static int 574 usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) 575 { 576 struct usba_ep *ep = to_usba_ep(_ep); 577 struct usba_udc *udc = ep->udc; 578 unsigned long flags, maxpacket; 579 unsigned int nr_trans; 580 581 DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc); 582 583 maxpacket = usb_endpoint_maxp(desc); 584 585 if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index) 586 || ep->index == 0 587 || desc->bDescriptorType != USB_DT_ENDPOINT 588 || maxpacket == 0 589 || maxpacket > ep->fifo_size) { 590 DBG(DBG_ERR, "ep_enable: Invalid argument"); 591 return -EINVAL; 592 } 593 594 ep->is_isoc = 0; 595 ep->is_in = 0; 596 597 DBG(DBG_ERR, "%s: EPT_CFG = 0x%lx (maxpacket = %lu)\n", 598 ep->ep.name, ep->ept_cfg, maxpacket); 599 600 if (usb_endpoint_dir_in(desc)) { 601 ep->is_in = 1; 602 ep->ept_cfg |= USBA_EPT_DIR_IN; 603 } 604 605 switch (usb_endpoint_type(desc)) { 606 case USB_ENDPOINT_XFER_CONTROL: 607 ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL); 608 break; 609 case USB_ENDPOINT_XFER_ISOC: 610 if (!ep->can_isoc) { 611 DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n", 612 ep->ep.name); 613 return -EINVAL; 614 } 615 616 /* 617 * Bits 11:12 specify number of _additional_ 618 * transactions per microframe. 619 */ 620 nr_trans = usb_endpoint_maxp_mult(desc); 621 if (nr_trans > 3) 622 return -EINVAL; 623 624 ep->is_isoc = 1; 625 ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO); 626 ep->ept_cfg |= USBA_BF(NB_TRANS, nr_trans); 627 628 break; 629 case USB_ENDPOINT_XFER_BULK: 630 ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK); 631 break; 632 case USB_ENDPOINT_XFER_INT: 633 ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT); 634 break; 635 } 636 637 spin_lock_irqsave(&ep->udc->lock, flags); 638 639 ep->ep.desc = desc; 640 ep->ep.maxpacket = maxpacket; 641 642 usba_ep_writel(ep, CFG, ep->ept_cfg); 643 usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); 644 645 if (ep->can_dma) { 646 u32 ctrl; 647 648 usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index) | 649 USBA_BF(DMA_INT, 1 << ep->index)); 650 ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA; 651 usba_ep_writel(ep, CTL_ENB, ctrl); 652 } else { 653 usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index)); 654 } 655 656 spin_unlock_irqrestore(&udc->lock, flags); 657 658 DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index, 659 (unsigned long)usba_ep_readl(ep, CFG)); 660 DBG(DBG_HW, "INT_ENB after init: %#08lx\n", 661 (unsigned long)usba_int_enb_get(udc)); 662 663 return 0; 664 } 665 666 static int usba_ep_disable(struct usb_ep *_ep) 667 { 668 struct usba_ep *ep = to_usba_ep(_ep); 669 struct usba_udc *udc = ep->udc; 670 LIST_HEAD(req_list); 671 unsigned long flags; 672 673 DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name); 674 675 spin_lock_irqsave(&udc->lock, flags); 676 677 if (!ep->ep.desc) { 678 spin_unlock_irqrestore(&udc->lock, flags); 679 DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name); 680 return -EINVAL; 681 } 682 ep->ep.desc = NULL; 683 684 list_splice_init(&ep->queue, &req_list); 685 if (ep->can_dma) { 686 usba_dma_writel(ep, CONTROL, 0); 687 usba_dma_writel(ep, ADDRESS, 0); 688 usba_dma_readl(ep, STATUS); 689 } 690 usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE); 691 usba_int_enb_clear(udc, USBA_BF(EPT_INT, 1 << ep->index)); 692 693 request_complete_list(ep, &req_list, -ESHUTDOWN); 694 695 spin_unlock_irqrestore(&udc->lock, flags); 696 697 return 0; 698 } 699 700 static struct usb_request * 701 usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) 702 { 703 struct usba_request *req; 704 705 DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags); 706 707 req = kzalloc(sizeof(*req), gfp_flags); 708 if (!req) 709 return NULL; 710 711 INIT_LIST_HEAD(&req->queue); 712 713 return &req->req; 714 } 715 716 static void 717 usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req) 718 { 719 struct usba_request *req = to_usba_req(_req); 720 721 DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req); 722 723 kfree(req); 724 } 725 726 static int queue_dma(struct usba_udc *udc, struct usba_ep *ep, 727 struct usba_request *req, gfp_t gfp_flags) 728 { 729 unsigned long flags; 730 int ret; 731 732 DBG(DBG_DMA, "%s: req l/%u d/%pad %c%c%c\n", 733 ep->ep.name, req->req.length, &req->req.dma, 734 req->req.zero ? 'Z' : 'z', 735 req->req.short_not_ok ? 'S' : 's', 736 req->req.no_interrupt ? 'I' : 'i'); 737 738 if (req->req.length > 0x10000) { 739 /* Lengths from 0 to 65536 (inclusive) are supported */ 740 DBG(DBG_ERR, "invalid request length %u\n", req->req.length); 741 return -EINVAL; 742 } 743 744 ret = usb_gadget_map_request(&udc->gadget, &req->req, ep->is_in); 745 if (ret) 746 return ret; 747 748 req->using_dma = 1; 749 req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length) 750 | USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE 751 | USBA_DMA_END_BUF_EN; 752 753 if (!ep->is_in) 754 req->ctrl |= USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE; 755 756 /* 757 * Add this request to the queue and submit for DMA if 758 * possible. Check if we're still alive first -- we may have 759 * received a reset since last time we checked. 760 */ 761 ret = -ESHUTDOWN; 762 spin_lock_irqsave(&udc->lock, flags); 763 if (ep->ep.desc) { 764 if (list_empty(&ep->queue)) 765 submit_request(ep, req); 766 767 list_add_tail(&req->queue, &ep->queue); 768 ret = 0; 769 } 770 spin_unlock_irqrestore(&udc->lock, flags); 771 772 return ret; 773 } 774 775 static int 776 usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) 777 { 778 struct usba_request *req = to_usba_req(_req); 779 struct usba_ep *ep = to_usba_ep(_ep); 780 struct usba_udc *udc = ep->udc; 781 unsigned long flags; 782 int ret; 783 784 DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n", 785 ep->ep.name, req, _req->length); 786 787 if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || 788 !ep->ep.desc) 789 return -ESHUTDOWN; 790 791 req->submitted = 0; 792 req->using_dma = 0; 793 req->last_transaction = 0; 794 795 _req->status = -EINPROGRESS; 796 _req->actual = 0; 797 798 if (ep->can_dma) 799 return queue_dma(udc, ep, req, gfp_flags); 800 801 /* May have received a reset since last time we checked */ 802 ret = -ESHUTDOWN; 803 spin_lock_irqsave(&udc->lock, flags); 804 if (ep->ep.desc) { 805 list_add_tail(&req->queue, &ep->queue); 806 807 if ((!ep_is_control(ep) && ep->is_in) || 808 (ep_is_control(ep) 809 && (ep->state == DATA_STAGE_IN 810 || ep->state == STATUS_STAGE_IN))) 811 usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); 812 else 813 usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY); 814 ret = 0; 815 } 816 spin_unlock_irqrestore(&udc->lock, flags); 817 818 return ret; 819 } 820 821 static void 822 usba_update_req(struct usba_ep *ep, struct usba_request *req, u32 status) 823 { 824 req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status); 825 } 826 827 static int stop_dma(struct usba_ep *ep, u32 *pstatus) 828 { 829 unsigned int timeout; 830 u32 status; 831 832 /* 833 * Stop the DMA controller. When writing both CH_EN 834 * and LINK to 0, the other bits are not affected. 835 */ 836 usba_dma_writel(ep, CONTROL, 0); 837 838 /* Wait for the FIFO to empty */ 839 for (timeout = 40; timeout; --timeout) { 840 status = usba_dma_readl(ep, STATUS); 841 if (!(status & USBA_DMA_CH_EN)) 842 break; 843 udelay(1); 844 } 845 846 if (pstatus) 847 *pstatus = status; 848 849 if (timeout == 0) { 850 dev_err(&ep->udc->pdev->dev, 851 "%s: timed out waiting for DMA FIFO to empty\n", 852 ep->ep.name); 853 return -ETIMEDOUT; 854 } 855 856 return 0; 857 } 858 859 static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) 860 { 861 struct usba_ep *ep = to_usba_ep(_ep); 862 struct usba_udc *udc = ep->udc; 863 struct usba_request *req = NULL; 864 struct usba_request *iter; 865 unsigned long flags; 866 u32 status; 867 868 DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n", 869 ep->ep.name, _req); 870 871 spin_lock_irqsave(&udc->lock, flags); 872 873 list_for_each_entry(iter, &ep->queue, queue) { 874 if (&iter->req != _req) 875 continue; 876 req = iter; 877 break; 878 } 879 880 if (!req) { 881 spin_unlock_irqrestore(&udc->lock, flags); 882 return -EINVAL; 883 } 884 885 if (req->using_dma) { 886 /* 887 * If this request is currently being transferred, 888 * stop the DMA controller and reset the FIFO. 889 */ 890 if (ep->queue.next == &req->queue) { 891 status = usba_dma_readl(ep, STATUS); 892 if (status & USBA_DMA_CH_EN) 893 stop_dma(ep, &status); 894 895 #ifdef CONFIG_USB_GADGET_DEBUG_FS 896 ep->last_dma_status = status; 897 #endif 898 899 usba_writel(udc, EPT_RST, 1 << ep->index); 900 901 usba_update_req(ep, req, status); 902 } 903 } 904 905 /* 906 * Errors should stop the queue from advancing until the 907 * completion function returns. 908 */ 909 list_del_init(&req->queue); 910 911 request_complete(ep, req, -ECONNRESET); 912 913 /* Process the next request if any */ 914 submit_next_request(ep); 915 spin_unlock_irqrestore(&udc->lock, flags); 916 917 return 0; 918 } 919 920 static int usba_ep_set_halt(struct usb_ep *_ep, int value) 921 { 922 struct usba_ep *ep = to_usba_ep(_ep); 923 struct usba_udc *udc = ep->udc; 924 unsigned long flags; 925 int ret = 0; 926 927 DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name, 928 value ? "set" : "clear"); 929 930 if (!ep->ep.desc) { 931 DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n", 932 ep->ep.name); 933 return -ENODEV; 934 } 935 if (ep->is_isoc) { 936 DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n", 937 ep->ep.name); 938 return -ENOTTY; 939 } 940 941 spin_lock_irqsave(&udc->lock, flags); 942 943 /* 944 * We can't halt IN endpoints while there are still data to be 945 * transferred 946 */ 947 if (!list_empty(&ep->queue) 948 || ((value && ep->is_in && (usba_ep_readl(ep, STA) 949 & USBA_BF(BUSY_BANKS, -1L))))) { 950 ret = -EAGAIN; 951 } else { 952 if (value) 953 usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL); 954 else 955 usba_ep_writel(ep, CLR_STA, 956 USBA_FORCE_STALL | USBA_TOGGLE_CLR); 957 usba_ep_readl(ep, STA); 958 } 959 960 spin_unlock_irqrestore(&udc->lock, flags); 961 962 return ret; 963 } 964 965 static int usba_ep_fifo_status(struct usb_ep *_ep) 966 { 967 struct usba_ep *ep = to_usba_ep(_ep); 968 969 return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA)); 970 } 971 972 static void usba_ep_fifo_flush(struct usb_ep *_ep) 973 { 974 struct usba_ep *ep = to_usba_ep(_ep); 975 struct usba_udc *udc = ep->udc; 976 977 usba_writel(udc, EPT_RST, 1 << ep->index); 978 } 979 980 static const struct usb_ep_ops usba_ep_ops = { 981 .enable = usba_ep_enable, 982 .disable = usba_ep_disable, 983 .alloc_request = usba_ep_alloc_request, 984 .free_request = usba_ep_free_request, 985 .queue = usba_ep_queue, 986 .dequeue = usba_ep_dequeue, 987 .set_halt = usba_ep_set_halt, 988 .fifo_status = usba_ep_fifo_status, 989 .fifo_flush = usba_ep_fifo_flush, 990 }; 991 992 static int usba_udc_get_frame(struct usb_gadget *gadget) 993 { 994 struct usba_udc *udc = to_usba_udc(gadget); 995 996 return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM)); 997 } 998 999 static int usba_udc_wakeup(struct usb_gadget *gadget) 1000 { 1001 struct usba_udc *udc = to_usba_udc(gadget); 1002 unsigned long flags; 1003 u32 ctrl; 1004 int ret = -EINVAL; 1005 1006 spin_lock_irqsave(&udc->lock, flags); 1007 if (udc->devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { 1008 ctrl = usba_readl(udc, CTRL); 1009 usba_writel(udc, CTRL, ctrl | USBA_REMOTE_WAKE_UP); 1010 ret = 0; 1011 } 1012 spin_unlock_irqrestore(&udc->lock, flags); 1013 1014 return ret; 1015 } 1016 1017 static int 1018 usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered) 1019 { 1020 struct usba_udc *udc = to_usba_udc(gadget); 1021 unsigned long flags; 1022 1023 gadget->is_selfpowered = (is_selfpowered != 0); 1024 spin_lock_irqsave(&udc->lock, flags); 1025 if (is_selfpowered) 1026 udc->devstatus |= 1 << USB_DEVICE_SELF_POWERED; 1027 else 1028 udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); 1029 spin_unlock_irqrestore(&udc->lock, flags); 1030 1031 return 0; 1032 } 1033 1034 static int atmel_usba_pullup(struct usb_gadget *gadget, int is_on); 1035 static int atmel_usba_start(struct usb_gadget *gadget, 1036 struct usb_gadget_driver *driver); 1037 static int atmel_usba_stop(struct usb_gadget *gadget); 1038 1039 static struct usb_ep *atmel_usba_match_ep(struct usb_gadget *gadget, 1040 struct usb_endpoint_descriptor *desc, 1041 struct usb_ss_ep_comp_descriptor *ep_comp) 1042 { 1043 struct usb_ep *_ep; 1044 struct usba_ep *ep; 1045 1046 /* Look at endpoints until an unclaimed one looks usable */ 1047 list_for_each_entry(_ep, &gadget->ep_list, ep_list) { 1048 if (usb_gadget_ep_match_desc(gadget, _ep, desc, ep_comp)) 1049 goto found_ep; 1050 } 1051 /* Fail */ 1052 return NULL; 1053 1054 found_ep: 1055 1056 if (fifo_mode == 0) { 1057 /* Optimize hw fifo size based on ep type and other info */ 1058 ep = to_usba_ep(_ep); 1059 1060 switch (usb_endpoint_type(desc)) { 1061 case USB_ENDPOINT_XFER_CONTROL: 1062 ep->nr_banks = 1; 1063 break; 1064 1065 case USB_ENDPOINT_XFER_ISOC: 1066 ep->fifo_size = 1024; 1067 if (ep->udc->ep_prealloc) 1068 ep->nr_banks = 2; 1069 break; 1070 1071 case USB_ENDPOINT_XFER_BULK: 1072 ep->fifo_size = 512; 1073 if (ep->udc->ep_prealloc) 1074 ep->nr_banks = 1; 1075 break; 1076 1077 case USB_ENDPOINT_XFER_INT: 1078 if (desc->wMaxPacketSize == 0) 1079 ep->fifo_size = 1080 roundup_pow_of_two(_ep->maxpacket_limit); 1081 else 1082 ep->fifo_size = 1083 roundup_pow_of_two(le16_to_cpu(desc->wMaxPacketSize)); 1084 if (ep->udc->ep_prealloc) 1085 ep->nr_banks = 1; 1086 break; 1087 } 1088 1089 /* It might be a little bit late to set this */ 1090 usb_ep_set_maxpacket_limit(&ep->ep, ep->fifo_size); 1091 1092 /* Generate ept_cfg basd on FIFO size and number of banks */ 1093 if (ep->fifo_size <= 8) 1094 ep->ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8); 1095 else 1096 /* LSB is bit 1, not 0 */ 1097 ep->ept_cfg = 1098 USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3); 1099 1100 ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks); 1101 } 1102 1103 return _ep; 1104 } 1105 1106 static const struct usb_gadget_ops usba_udc_ops = { 1107 .get_frame = usba_udc_get_frame, 1108 .wakeup = usba_udc_wakeup, 1109 .set_selfpowered = usba_udc_set_selfpowered, 1110 .pullup = atmel_usba_pullup, 1111 .udc_start = atmel_usba_start, 1112 .udc_stop = atmel_usba_stop, 1113 .match_ep = atmel_usba_match_ep, 1114 }; 1115 1116 static struct usb_endpoint_descriptor usba_ep0_desc = { 1117 .bLength = USB_DT_ENDPOINT_SIZE, 1118 .bDescriptorType = USB_DT_ENDPOINT, 1119 .bEndpointAddress = 0, 1120 .bmAttributes = USB_ENDPOINT_XFER_CONTROL, 1121 .wMaxPacketSize = cpu_to_le16(64), 1122 /* FIXME: I have no idea what to put here */ 1123 .bInterval = 1, 1124 }; 1125 1126 static const struct usb_gadget usba_gadget_template = { 1127 .ops = &usba_udc_ops, 1128 .max_speed = USB_SPEED_HIGH, 1129 .name = "atmel_usba_udc", 1130 }; 1131 1132 /* 1133 * Called with interrupts disabled and udc->lock held. 1134 */ 1135 static void reset_all_endpoints(struct usba_udc *udc) 1136 { 1137 struct usba_ep *ep; 1138 struct usba_request *req, *tmp_req; 1139 1140 usba_writel(udc, EPT_RST, ~0UL); 1141 1142 ep = to_usba_ep(udc->gadget.ep0); 1143 list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) { 1144 list_del_init(&req->queue); 1145 request_complete(ep, req, -ECONNRESET); 1146 } 1147 } 1148 1149 static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex) 1150 { 1151 struct usba_ep *ep; 1152 1153 if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) 1154 return to_usba_ep(udc->gadget.ep0); 1155 1156 list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { 1157 u8 bEndpointAddress; 1158 1159 if (!ep->ep.desc) 1160 continue; 1161 bEndpointAddress = ep->ep.desc->bEndpointAddress; 1162 if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) 1163 continue; 1164 if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) 1165 == (wIndex & USB_ENDPOINT_NUMBER_MASK)) 1166 return ep; 1167 } 1168 1169 return NULL; 1170 } 1171 1172 /* Called with interrupts disabled and udc->lock held */ 1173 static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep) 1174 { 1175 usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL); 1176 ep->state = WAIT_FOR_SETUP; 1177 } 1178 1179 static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep) 1180 { 1181 if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL) 1182 return 1; 1183 return 0; 1184 } 1185 1186 static inline void set_address(struct usba_udc *udc, unsigned int addr) 1187 { 1188 u32 regval; 1189 1190 DBG(DBG_BUS, "setting address %u...\n", addr); 1191 regval = usba_readl(udc, CTRL); 1192 regval = USBA_BFINS(DEV_ADDR, addr, regval); 1193 usba_writel(udc, CTRL, regval); 1194 } 1195 1196 static int do_test_mode(struct usba_udc *udc) 1197 { 1198 static const char test_packet_buffer[] = { 1199 /* JKJKJKJK * 9 */ 1200 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 1201 /* JJKKJJKK * 8 */ 1202 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 1203 /* JJKKJJKK * 8 */ 1204 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 1205 /* JJJJJJJKKKKKKK * 8 */ 1206 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 1207 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 1208 /* JJJJJJJK * 8 */ 1209 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 1210 /* {JKKKKKKK * 10}, JK */ 1211 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E 1212 }; 1213 struct usba_ep *ep; 1214 struct device *dev = &udc->pdev->dev; 1215 int test_mode; 1216 1217 test_mode = udc->test_mode; 1218 1219 /* Start from a clean slate */ 1220 reset_all_endpoints(udc); 1221 1222 switch (test_mode) { 1223 case 0x0100: 1224 /* Test_J */ 1225 usba_writel(udc, TST, USBA_TST_J_MODE); 1226 dev_info(dev, "Entering Test_J mode...\n"); 1227 break; 1228 case 0x0200: 1229 /* Test_K */ 1230 usba_writel(udc, TST, USBA_TST_K_MODE); 1231 dev_info(dev, "Entering Test_K mode...\n"); 1232 break; 1233 case 0x0300: 1234 /* 1235 * Test_SE0_NAK: Force high-speed mode and set up ep0 1236 * for Bulk IN transfers 1237 */ 1238 ep = &udc->usba_ep[0]; 1239 usba_writel(udc, TST, 1240 USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH)); 1241 usba_ep_writel(ep, CFG, 1242 USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64) 1243 | USBA_EPT_DIR_IN 1244 | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK) 1245 | USBA_BF(BK_NUMBER, 1)); 1246 if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) { 1247 set_protocol_stall(udc, ep); 1248 dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n"); 1249 } else { 1250 usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); 1251 dev_info(dev, "Entering Test_SE0_NAK mode...\n"); 1252 } 1253 break; 1254 case 0x0400: 1255 /* Test_Packet */ 1256 ep = &udc->usba_ep[0]; 1257 usba_ep_writel(ep, CFG, 1258 USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64) 1259 | USBA_EPT_DIR_IN 1260 | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK) 1261 | USBA_BF(BK_NUMBER, 1)); 1262 if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) { 1263 set_protocol_stall(udc, ep); 1264 dev_err(dev, "Test_Packet: ep0 not mapped\n"); 1265 } else { 1266 usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); 1267 usba_writel(udc, TST, USBA_TST_PKT_MODE); 1268 memcpy_toio(ep->fifo, test_packet_buffer, 1269 sizeof(test_packet_buffer)); 1270 usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); 1271 dev_info(dev, "Entering Test_Packet mode...\n"); 1272 } 1273 break; 1274 default: 1275 dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode); 1276 return -EINVAL; 1277 } 1278 1279 return 0; 1280 } 1281 1282 /* Avoid overly long expressions */ 1283 static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq) 1284 { 1285 if (crq->wValue == cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP)) 1286 return true; 1287 return false; 1288 } 1289 1290 static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq) 1291 { 1292 if (crq->wValue == cpu_to_le16(USB_DEVICE_TEST_MODE)) 1293 return true; 1294 return false; 1295 } 1296 1297 static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq) 1298 { 1299 if (crq->wValue == cpu_to_le16(USB_ENDPOINT_HALT)) 1300 return true; 1301 return false; 1302 } 1303 1304 static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep, 1305 struct usb_ctrlrequest *crq) 1306 { 1307 int retval = 0; 1308 1309 switch (crq->bRequest) { 1310 case USB_REQ_GET_STATUS: { 1311 u16 status; 1312 1313 if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) { 1314 status = cpu_to_le16(udc->devstatus); 1315 } else if (crq->bRequestType 1316 == (USB_DIR_IN | USB_RECIP_INTERFACE)) { 1317 status = cpu_to_le16(0); 1318 } else if (crq->bRequestType 1319 == (USB_DIR_IN | USB_RECIP_ENDPOINT)) { 1320 struct usba_ep *target; 1321 1322 target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); 1323 if (!target) 1324 goto stall; 1325 1326 status = 0; 1327 if (is_stalled(udc, target)) 1328 status |= cpu_to_le16(1); 1329 } else 1330 goto delegate; 1331 1332 /* Write directly to the FIFO. No queueing is done. */ 1333 if (crq->wLength != cpu_to_le16(sizeof(status))) 1334 goto stall; 1335 ep->state = DATA_STAGE_IN; 1336 writew_relaxed(status, ep->fifo); 1337 usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); 1338 break; 1339 } 1340 1341 case USB_REQ_CLEAR_FEATURE: { 1342 if (crq->bRequestType == USB_RECIP_DEVICE) { 1343 if (feature_is_dev_remote_wakeup(crq)) 1344 udc->devstatus 1345 &= ~(1 << USB_DEVICE_REMOTE_WAKEUP); 1346 else 1347 /* Can't CLEAR_FEATURE TEST_MODE */ 1348 goto stall; 1349 } else if (crq->bRequestType == USB_RECIP_ENDPOINT) { 1350 struct usba_ep *target; 1351 1352 if (crq->wLength != cpu_to_le16(0) 1353 || !feature_is_ep_halt(crq)) 1354 goto stall; 1355 target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); 1356 if (!target) 1357 goto stall; 1358 1359 usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL); 1360 if (target->index != 0) 1361 usba_ep_writel(target, CLR_STA, 1362 USBA_TOGGLE_CLR); 1363 } else { 1364 goto delegate; 1365 } 1366 1367 send_status(udc, ep); 1368 break; 1369 } 1370 1371 case USB_REQ_SET_FEATURE: { 1372 if (crq->bRequestType == USB_RECIP_DEVICE) { 1373 if (feature_is_dev_test_mode(crq)) { 1374 send_status(udc, ep); 1375 ep->state = STATUS_STAGE_TEST; 1376 udc->test_mode = le16_to_cpu(crq->wIndex); 1377 return 0; 1378 } else if (feature_is_dev_remote_wakeup(crq)) { 1379 udc->devstatus |= 1 << USB_DEVICE_REMOTE_WAKEUP; 1380 } else { 1381 goto stall; 1382 } 1383 } else if (crq->bRequestType == USB_RECIP_ENDPOINT) { 1384 struct usba_ep *target; 1385 1386 if (crq->wLength != cpu_to_le16(0) 1387 || !feature_is_ep_halt(crq)) 1388 goto stall; 1389 1390 target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); 1391 if (!target) 1392 goto stall; 1393 1394 usba_ep_writel(target, SET_STA, USBA_FORCE_STALL); 1395 } else 1396 goto delegate; 1397 1398 send_status(udc, ep); 1399 break; 1400 } 1401 1402 case USB_REQ_SET_ADDRESS: 1403 if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE)) 1404 goto delegate; 1405 1406 set_address(udc, le16_to_cpu(crq->wValue)); 1407 send_status(udc, ep); 1408 ep->state = STATUS_STAGE_ADDR; 1409 break; 1410 1411 default: 1412 delegate: 1413 spin_unlock(&udc->lock); 1414 retval = udc->driver->setup(&udc->gadget, crq); 1415 spin_lock(&udc->lock); 1416 } 1417 1418 return retval; 1419 1420 stall: 1421 pr_err("udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, " 1422 "halting endpoint...\n", 1423 ep->ep.name, crq->bRequestType, crq->bRequest, 1424 le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex), 1425 le16_to_cpu(crq->wLength)); 1426 set_protocol_stall(udc, ep); 1427 return -1; 1428 } 1429 1430 static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep) 1431 { 1432 struct usba_request *req; 1433 u32 epstatus; 1434 u32 epctrl; 1435 1436 restart: 1437 epstatus = usba_ep_readl(ep, STA); 1438 epctrl = usba_ep_readl(ep, CTL); 1439 1440 DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n", 1441 ep->ep.name, ep->state, epstatus, epctrl); 1442 1443 req = NULL; 1444 if (!list_empty(&ep->queue)) 1445 req = list_entry(ep->queue.next, 1446 struct usba_request, queue); 1447 1448 if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) { 1449 if (req->submitted) 1450 next_fifo_transaction(ep, req); 1451 else 1452 submit_request(ep, req); 1453 1454 if (req->last_transaction) { 1455 usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); 1456 usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); 1457 } 1458 goto restart; 1459 } 1460 if ((epstatus & epctrl) & USBA_TX_COMPLETE) { 1461 usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE); 1462 1463 switch (ep->state) { 1464 case DATA_STAGE_IN: 1465 usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY); 1466 usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); 1467 ep->state = STATUS_STAGE_OUT; 1468 break; 1469 case STATUS_STAGE_ADDR: 1470 /* Activate our new address */ 1471 usba_writel(udc, CTRL, (usba_readl(udc, CTRL) 1472 | USBA_FADDR_EN)); 1473 usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); 1474 ep->state = WAIT_FOR_SETUP; 1475 break; 1476 case STATUS_STAGE_IN: 1477 if (req) { 1478 list_del_init(&req->queue); 1479 request_complete(ep, req, 0); 1480 submit_next_request(ep); 1481 } 1482 usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); 1483 ep->state = WAIT_FOR_SETUP; 1484 break; 1485 case STATUS_STAGE_TEST: 1486 usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); 1487 ep->state = WAIT_FOR_SETUP; 1488 if (do_test_mode(udc)) 1489 set_protocol_stall(udc, ep); 1490 break; 1491 default: 1492 pr_err("udc: %s: TXCOMP: Invalid endpoint state %d, " 1493 "halting endpoint...\n", 1494 ep->ep.name, ep->state); 1495 set_protocol_stall(udc, ep); 1496 break; 1497 } 1498 1499 goto restart; 1500 } 1501 if ((epstatus & epctrl) & USBA_RX_BK_RDY) { 1502 switch (ep->state) { 1503 case STATUS_STAGE_OUT: 1504 usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); 1505 usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); 1506 1507 if (req) { 1508 list_del_init(&req->queue); 1509 request_complete(ep, req, 0); 1510 } 1511 ep->state = WAIT_FOR_SETUP; 1512 break; 1513 1514 case DATA_STAGE_OUT: 1515 receive_data(ep); 1516 break; 1517 1518 default: 1519 usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); 1520 usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); 1521 pr_err("udc: %s: RXRDY: Invalid endpoint state %d, " 1522 "halting endpoint...\n", 1523 ep->ep.name, ep->state); 1524 set_protocol_stall(udc, ep); 1525 break; 1526 } 1527 1528 goto restart; 1529 } 1530 if (epstatus & USBA_RX_SETUP) { 1531 union { 1532 struct usb_ctrlrequest crq; 1533 unsigned long data[2]; 1534 } crq; 1535 unsigned int pkt_len; 1536 int ret; 1537 1538 if (ep->state != WAIT_FOR_SETUP) { 1539 /* 1540 * Didn't expect a SETUP packet at this 1541 * point. Clean up any pending requests (which 1542 * may be successful). 1543 */ 1544 int status = -EPROTO; 1545 1546 /* 1547 * RXRDY and TXCOMP are dropped when SETUP 1548 * packets arrive. Just pretend we received 1549 * the status packet. 1550 */ 1551 if (ep->state == STATUS_STAGE_OUT 1552 || ep->state == STATUS_STAGE_IN) { 1553 usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); 1554 status = 0; 1555 } 1556 1557 if (req) { 1558 list_del_init(&req->queue); 1559 request_complete(ep, req, status); 1560 } 1561 } 1562 1563 pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA)); 1564 DBG(DBG_HW, "Packet length: %u\n", pkt_len); 1565 if (pkt_len != sizeof(crq)) { 1566 pr_warn("udc: Invalid packet length %u (expected %zu)\n", 1567 pkt_len, sizeof(crq)); 1568 set_protocol_stall(udc, ep); 1569 return; 1570 } 1571 1572 DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo); 1573 memcpy_fromio(crq.data, ep->fifo, sizeof(crq)); 1574 1575 /* Free up one bank in the FIFO so that we can 1576 * generate or receive a reply right away. */ 1577 usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP); 1578 1579 /* printk(KERN_DEBUG "setup: %d: %02x.%02x\n", 1580 ep->state, crq.crq.bRequestType, 1581 crq.crq.bRequest); */ 1582 1583 if (crq.crq.bRequestType & USB_DIR_IN) { 1584 /* 1585 * The USB 2.0 spec states that "if wLength is 1586 * zero, there is no data transfer phase." 1587 * However, testusb #14 seems to actually 1588 * expect a data phase even if wLength = 0... 1589 */ 1590 ep->state = DATA_STAGE_IN; 1591 } else { 1592 if (crq.crq.wLength != cpu_to_le16(0)) 1593 ep->state = DATA_STAGE_OUT; 1594 else 1595 ep->state = STATUS_STAGE_IN; 1596 } 1597 1598 ret = -1; 1599 if (ep->index == 0) 1600 ret = handle_ep0_setup(udc, ep, &crq.crq); 1601 else { 1602 spin_unlock(&udc->lock); 1603 ret = udc->driver->setup(&udc->gadget, &crq.crq); 1604 spin_lock(&udc->lock); 1605 } 1606 1607 DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n", 1608 crq.crq.bRequestType, crq.crq.bRequest, 1609 le16_to_cpu(crq.crq.wLength), ep->state, ret); 1610 1611 if (ret < 0) { 1612 /* Let the host know that we failed */ 1613 set_protocol_stall(udc, ep); 1614 } 1615 } 1616 } 1617 1618 static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep) 1619 { 1620 struct usba_request *req; 1621 u32 epstatus; 1622 u32 epctrl; 1623 1624 epstatus = usba_ep_readl(ep, STA); 1625 epctrl = usba_ep_readl(ep, CTL); 1626 1627 DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus); 1628 1629 while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) { 1630 DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name); 1631 1632 if (list_empty(&ep->queue)) { 1633 dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n"); 1634 usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); 1635 return; 1636 } 1637 1638 req = list_entry(ep->queue.next, struct usba_request, queue); 1639 1640 if (req->using_dma) { 1641 /* Send a zero-length packet */ 1642 usba_ep_writel(ep, SET_STA, 1643 USBA_TX_PK_RDY); 1644 usba_ep_writel(ep, CTL_DIS, 1645 USBA_TX_PK_RDY); 1646 list_del_init(&req->queue); 1647 submit_next_request(ep); 1648 request_complete(ep, req, 0); 1649 } else { 1650 if (req->submitted) 1651 next_fifo_transaction(ep, req); 1652 else 1653 submit_request(ep, req); 1654 1655 if (req->last_transaction) { 1656 list_del_init(&req->queue); 1657 submit_next_request(ep); 1658 request_complete(ep, req, 0); 1659 } 1660 } 1661 1662 epstatus = usba_ep_readl(ep, STA); 1663 epctrl = usba_ep_readl(ep, CTL); 1664 } 1665 if ((epstatus & epctrl) & USBA_RX_BK_RDY) { 1666 DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name); 1667 receive_data(ep); 1668 } 1669 } 1670 1671 static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep) 1672 { 1673 struct usba_request *req; 1674 u32 status, control, pending; 1675 1676 status = usba_dma_readl(ep, STATUS); 1677 control = usba_dma_readl(ep, CONTROL); 1678 #ifdef CONFIG_USB_GADGET_DEBUG_FS 1679 ep->last_dma_status = status; 1680 #endif 1681 pending = status & control; 1682 DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n", status, control); 1683 1684 if (status & USBA_DMA_CH_EN) { 1685 dev_err(&udc->pdev->dev, 1686 "DMA_CH_EN is set after transfer is finished!\n"); 1687 dev_err(&udc->pdev->dev, 1688 "status=%#08x, pending=%#08x, control=%#08x\n", 1689 status, pending, control); 1690 1691 /* 1692 * try to pretend nothing happened. We might have to 1693 * do something here... 1694 */ 1695 } 1696 1697 if (list_empty(&ep->queue)) 1698 /* Might happen if a reset comes along at the right moment */ 1699 return; 1700 1701 if (pending & (USBA_DMA_END_TR_ST | USBA_DMA_END_BUF_ST)) { 1702 req = list_entry(ep->queue.next, struct usba_request, queue); 1703 usba_update_req(ep, req, status); 1704 1705 list_del_init(&req->queue); 1706 submit_next_request(ep); 1707 request_complete(ep, req, 0); 1708 } 1709 } 1710 1711 static int start_clock(struct usba_udc *udc); 1712 static void stop_clock(struct usba_udc *udc); 1713 1714 static irqreturn_t usba_udc_irq(int irq, void *devid) 1715 { 1716 struct usba_udc *udc = devid; 1717 u32 status, int_enb; 1718 u32 dma_status; 1719 u32 ep_status; 1720 1721 spin_lock(&udc->lock); 1722 1723 int_enb = usba_int_enb_get(udc); 1724 status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED); 1725 DBG(DBG_INT, "irq, status=%#08x\n", status); 1726 1727 if (status & USBA_DET_SUSPEND) { 1728 usba_writel(udc, INT_CLR, USBA_DET_SUSPEND|USBA_WAKE_UP); 1729 usba_int_enb_set(udc, USBA_WAKE_UP); 1730 usba_int_enb_clear(udc, USBA_DET_SUSPEND); 1731 udc->suspended = true; 1732 toggle_bias(udc, 0); 1733 udc->bias_pulse_needed = true; 1734 stop_clock(udc); 1735 DBG(DBG_BUS, "Suspend detected\n"); 1736 if (udc->gadget.speed != USB_SPEED_UNKNOWN 1737 && udc->driver && udc->driver->suspend) { 1738 spin_unlock(&udc->lock); 1739 udc->driver->suspend(&udc->gadget); 1740 spin_lock(&udc->lock); 1741 } 1742 } 1743 1744 if (status & USBA_WAKE_UP) { 1745 start_clock(udc); 1746 toggle_bias(udc, 1); 1747 usba_writel(udc, INT_CLR, USBA_WAKE_UP); 1748 DBG(DBG_BUS, "Wake Up CPU detected\n"); 1749 } 1750 1751 if (status & USBA_END_OF_RESUME) { 1752 udc->suspended = false; 1753 usba_writel(udc, INT_CLR, USBA_END_OF_RESUME); 1754 usba_int_enb_clear(udc, USBA_WAKE_UP); 1755 usba_int_enb_set(udc, USBA_DET_SUSPEND); 1756 generate_bias_pulse(udc); 1757 DBG(DBG_BUS, "Resume detected\n"); 1758 if (udc->gadget.speed != USB_SPEED_UNKNOWN 1759 && udc->driver && udc->driver->resume) { 1760 spin_unlock(&udc->lock); 1761 udc->driver->resume(&udc->gadget); 1762 spin_lock(&udc->lock); 1763 } 1764 } 1765 1766 dma_status = USBA_BFEXT(DMA_INT, status); 1767 if (dma_status) { 1768 int i; 1769 1770 usba_int_enb_set(udc, USBA_DET_SUSPEND); 1771 1772 for (i = 1; i <= USBA_NR_DMAS; i++) 1773 if (dma_status & (1 << i)) 1774 usba_dma_irq(udc, &udc->usba_ep[i]); 1775 } 1776 1777 ep_status = USBA_BFEXT(EPT_INT, status); 1778 if (ep_status) { 1779 int i; 1780 1781 usba_int_enb_set(udc, USBA_DET_SUSPEND); 1782 1783 for (i = 0; i < udc->num_ep; i++) 1784 if (ep_status & (1 << i)) { 1785 if (ep_is_control(&udc->usba_ep[i])) 1786 usba_control_irq(udc, &udc->usba_ep[i]); 1787 else 1788 usba_ep_irq(udc, &udc->usba_ep[i]); 1789 } 1790 } 1791 1792 if (status & USBA_END_OF_RESET) { 1793 struct usba_ep *ep0, *ep; 1794 int i; 1795 1796 usba_writel(udc, INT_CLR, 1797 USBA_END_OF_RESET|USBA_END_OF_RESUME 1798 |USBA_DET_SUSPEND|USBA_WAKE_UP); 1799 generate_bias_pulse(udc); 1800 reset_all_endpoints(udc); 1801 1802 if (udc->gadget.speed != USB_SPEED_UNKNOWN && udc->driver) { 1803 udc->gadget.speed = USB_SPEED_UNKNOWN; 1804 spin_unlock(&udc->lock); 1805 usb_gadget_udc_reset(&udc->gadget, udc->driver); 1806 spin_lock(&udc->lock); 1807 } 1808 1809 if (status & USBA_HIGH_SPEED) 1810 udc->gadget.speed = USB_SPEED_HIGH; 1811 else 1812 udc->gadget.speed = USB_SPEED_FULL; 1813 DBG(DBG_BUS, "%s bus reset detected\n", 1814 usb_speed_string(udc->gadget.speed)); 1815 1816 ep0 = &udc->usba_ep[0]; 1817 ep0->ep.desc = &usba_ep0_desc; 1818 ep0->state = WAIT_FOR_SETUP; 1819 usba_ep_writel(ep0, CFG, 1820 (USBA_BF(EPT_SIZE, EP0_EPT_SIZE) 1821 | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL) 1822 | USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE))); 1823 usba_ep_writel(ep0, CTL_ENB, 1824 USBA_EPT_ENABLE | USBA_RX_SETUP); 1825 1826 /* If we get reset while suspended... */ 1827 udc->suspended = false; 1828 usba_int_enb_clear(udc, USBA_WAKE_UP); 1829 1830 usba_int_enb_set(udc, USBA_BF(EPT_INT, 1) | 1831 USBA_DET_SUSPEND | USBA_END_OF_RESUME); 1832 1833 /* 1834 * Unclear why we hit this irregularly, e.g. in usbtest, 1835 * but it's clearly harmless... 1836 */ 1837 if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED)) 1838 dev_err(&udc->pdev->dev, 1839 "ODD: EP0 configuration is invalid!\n"); 1840 1841 /* Preallocate other endpoints */ 1842 for (i = 1; i < udc->num_ep; i++) { 1843 ep = &udc->usba_ep[i]; 1844 if (ep->ep.claimed) { 1845 usba_ep_writel(ep, CFG, ep->ept_cfg); 1846 if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) 1847 dev_err(&udc->pdev->dev, 1848 "ODD: EP%d configuration is invalid!\n", i); 1849 } 1850 } 1851 } 1852 1853 spin_unlock(&udc->lock); 1854 1855 return IRQ_HANDLED; 1856 } 1857 1858 static int start_clock(struct usba_udc *udc) 1859 { 1860 int ret; 1861 1862 if (udc->clocked) 1863 return 0; 1864 1865 pm_stay_awake(&udc->pdev->dev); 1866 1867 ret = clk_prepare_enable(udc->pclk); 1868 if (ret) 1869 return ret; 1870 ret = clk_prepare_enable(udc->hclk); 1871 if (ret) { 1872 clk_disable_unprepare(udc->pclk); 1873 return ret; 1874 } 1875 1876 udc->clocked = true; 1877 return 0; 1878 } 1879 1880 static void stop_clock(struct usba_udc *udc) 1881 { 1882 if (!udc->clocked) 1883 return; 1884 1885 clk_disable_unprepare(udc->hclk); 1886 clk_disable_unprepare(udc->pclk); 1887 1888 udc->clocked = false; 1889 1890 pm_relax(&udc->pdev->dev); 1891 } 1892 1893 static int usba_start(struct usba_udc *udc) 1894 { 1895 unsigned long flags; 1896 int ret; 1897 1898 ret = start_clock(udc); 1899 if (ret) 1900 return ret; 1901 1902 if (udc->suspended) 1903 return 0; 1904 1905 spin_lock_irqsave(&udc->lock, flags); 1906 toggle_bias(udc, 1); 1907 usba_writel(udc, CTRL, USBA_ENABLE_MASK); 1908 /* Clear all requested and pending interrupts... */ 1909 usba_writel(udc, INT_ENB, 0); 1910 udc->int_enb_cache = 0; 1911 usba_writel(udc, INT_CLR, 1912 USBA_END_OF_RESET|USBA_END_OF_RESUME 1913 |USBA_DET_SUSPEND|USBA_WAKE_UP); 1914 /* ...and enable just 'reset' IRQ to get us started */ 1915 usba_int_enb_set(udc, USBA_END_OF_RESET); 1916 spin_unlock_irqrestore(&udc->lock, flags); 1917 1918 return 0; 1919 } 1920 1921 static void usba_stop(struct usba_udc *udc) 1922 { 1923 unsigned long flags; 1924 1925 if (udc->suspended) 1926 return; 1927 1928 spin_lock_irqsave(&udc->lock, flags); 1929 udc->gadget.speed = USB_SPEED_UNKNOWN; 1930 reset_all_endpoints(udc); 1931 1932 /* This will also disable the DP pullup */ 1933 toggle_bias(udc, 0); 1934 usba_writel(udc, CTRL, USBA_DISABLE_MASK); 1935 spin_unlock_irqrestore(&udc->lock, flags); 1936 1937 stop_clock(udc); 1938 } 1939 1940 static irqreturn_t usba_vbus_irq_thread(int irq, void *devid) 1941 { 1942 struct usba_udc *udc = devid; 1943 int vbus; 1944 1945 /* debounce */ 1946 udelay(10); 1947 1948 mutex_lock(&udc->vbus_mutex); 1949 1950 vbus = vbus_is_present(udc); 1951 if (vbus != udc->vbus_prev) { 1952 if (vbus) { 1953 usba_start(udc); 1954 } else { 1955 udc->suspended = false; 1956 if (udc->driver->disconnect) 1957 udc->driver->disconnect(&udc->gadget); 1958 1959 usba_stop(udc); 1960 } 1961 udc->vbus_prev = vbus; 1962 } 1963 1964 mutex_unlock(&udc->vbus_mutex); 1965 return IRQ_HANDLED; 1966 } 1967 1968 static int atmel_usba_pullup(struct usb_gadget *gadget, int is_on) 1969 { 1970 struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); 1971 unsigned long flags; 1972 u32 ctrl; 1973 1974 spin_lock_irqsave(&udc->lock, flags); 1975 ctrl = usba_readl(udc, CTRL); 1976 if (is_on) 1977 ctrl &= ~USBA_DETACH; 1978 else 1979 ctrl |= USBA_DETACH; 1980 usba_writel(udc, CTRL, ctrl); 1981 spin_unlock_irqrestore(&udc->lock, flags); 1982 1983 return 0; 1984 } 1985 1986 static int atmel_usba_start(struct usb_gadget *gadget, 1987 struct usb_gadget_driver *driver) 1988 { 1989 int ret; 1990 struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); 1991 unsigned long flags; 1992 1993 spin_lock_irqsave(&udc->lock, flags); 1994 udc->devstatus = 1 << USB_DEVICE_SELF_POWERED; 1995 udc->driver = driver; 1996 spin_unlock_irqrestore(&udc->lock, flags); 1997 1998 mutex_lock(&udc->vbus_mutex); 1999 2000 if (udc->vbus_pin) 2001 enable_irq(gpiod_to_irq(udc->vbus_pin)); 2002 2003 /* If Vbus is present, enable the controller and wait for reset */ 2004 udc->vbus_prev = vbus_is_present(udc); 2005 if (udc->vbus_prev) { 2006 ret = usba_start(udc); 2007 if (ret) 2008 goto err; 2009 } 2010 2011 mutex_unlock(&udc->vbus_mutex); 2012 return 0; 2013 2014 err: 2015 if (udc->vbus_pin) 2016 disable_irq(gpiod_to_irq(udc->vbus_pin)); 2017 2018 mutex_unlock(&udc->vbus_mutex); 2019 2020 spin_lock_irqsave(&udc->lock, flags); 2021 udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); 2022 udc->driver = NULL; 2023 spin_unlock_irqrestore(&udc->lock, flags); 2024 return ret; 2025 } 2026 2027 static int atmel_usba_stop(struct usb_gadget *gadget) 2028 { 2029 struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); 2030 2031 if (udc->vbus_pin) 2032 disable_irq(gpiod_to_irq(udc->vbus_pin)); 2033 2034 udc->suspended = false; 2035 usba_stop(udc); 2036 2037 udc->driver = NULL; 2038 2039 return 0; 2040 } 2041 2042 static void at91sam9rl_toggle_bias(struct usba_udc *udc, int is_on) 2043 { 2044 regmap_update_bits(udc->pmc, AT91_CKGR_UCKR, AT91_PMC_BIASEN, 2045 is_on ? AT91_PMC_BIASEN : 0); 2046 } 2047 2048 static void at91sam9g45_pulse_bias(struct usba_udc *udc) 2049 { 2050 regmap_update_bits(udc->pmc, AT91_CKGR_UCKR, AT91_PMC_BIASEN, 0); 2051 regmap_update_bits(udc->pmc, AT91_CKGR_UCKR, AT91_PMC_BIASEN, 2052 AT91_PMC_BIASEN); 2053 } 2054 2055 static const struct usba_udc_errata at91sam9rl_errata = { 2056 .toggle_bias = at91sam9rl_toggle_bias, 2057 }; 2058 2059 static const struct usba_udc_errata at91sam9g45_errata = { 2060 .pulse_bias = at91sam9g45_pulse_bias, 2061 }; 2062 2063 static const struct usba_ep_config ep_config_sam9[] = { 2064 { .nr_banks = 1 }, /* ep 0 */ 2065 { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */ 2066 { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */ 2067 { .nr_banks = 3, .can_dma = 1 }, /* ep 3 */ 2068 { .nr_banks = 3, .can_dma = 1 }, /* ep 4 */ 2069 { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */ 2070 { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */ 2071 }; 2072 2073 static const struct usba_ep_config ep_config_sama5[] = { 2074 { .nr_banks = 1 }, /* ep 0 */ 2075 { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */ 2076 { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */ 2077 { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 3 */ 2078 { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 4 */ 2079 { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */ 2080 { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */ 2081 { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 7 */ 2082 { .nr_banks = 2, .can_isoc = 1 }, /* ep 8 */ 2083 { .nr_banks = 2, .can_isoc = 1 }, /* ep 9 */ 2084 { .nr_banks = 2, .can_isoc = 1 }, /* ep 10 */ 2085 { .nr_banks = 2, .can_isoc = 1 }, /* ep 11 */ 2086 { .nr_banks = 2, .can_isoc = 1 }, /* ep 12 */ 2087 { .nr_banks = 2, .can_isoc = 1 }, /* ep 13 */ 2088 { .nr_banks = 2, .can_isoc = 1 }, /* ep 14 */ 2089 { .nr_banks = 2, .can_isoc = 1 }, /* ep 15 */ 2090 }; 2091 2092 static const struct usba_udc_config udc_at91sam9rl_cfg = { 2093 .errata = &at91sam9rl_errata, 2094 .config = ep_config_sam9, 2095 .num_ep = ARRAY_SIZE(ep_config_sam9), 2096 .ep_prealloc = true, 2097 }; 2098 2099 static const struct usba_udc_config udc_at91sam9g45_cfg = { 2100 .errata = &at91sam9g45_errata, 2101 .config = ep_config_sam9, 2102 .num_ep = ARRAY_SIZE(ep_config_sam9), 2103 .ep_prealloc = true, 2104 }; 2105 2106 static const struct usba_udc_config udc_sama5d3_cfg = { 2107 .config = ep_config_sama5, 2108 .num_ep = ARRAY_SIZE(ep_config_sama5), 2109 .ep_prealloc = true, 2110 }; 2111 2112 static const struct usba_udc_config udc_sam9x60_cfg = { 2113 .num_ep = ARRAY_SIZE(ep_config_sam9), 2114 .config = ep_config_sam9, 2115 .ep_prealloc = false, 2116 }; 2117 2118 static const struct of_device_id atmel_udc_dt_ids[] = { 2119 { .compatible = "atmel,at91sam9rl-udc", .data = &udc_at91sam9rl_cfg }, 2120 { .compatible = "atmel,at91sam9g45-udc", .data = &udc_at91sam9g45_cfg }, 2121 { .compatible = "atmel,sama5d3-udc", .data = &udc_sama5d3_cfg }, 2122 { .compatible = "microchip,sam9x60-udc", .data = &udc_sam9x60_cfg }, 2123 { /* sentinel */ } 2124 }; 2125 2126 MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids); 2127 2128 static const struct of_device_id atmel_pmc_dt_ids[] = { 2129 { .compatible = "atmel,at91sam9g45-pmc" }, 2130 { .compatible = "atmel,at91sam9rl-pmc" }, 2131 { .compatible = "atmel,at91sam9x5-pmc" }, 2132 { /* sentinel */ } 2133 }; 2134 2135 static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, 2136 struct usba_udc *udc) 2137 { 2138 struct device_node *np = pdev->dev.of_node; 2139 const struct of_device_id *match; 2140 struct device_node *pp; 2141 int i, ret; 2142 struct usba_ep *eps, *ep; 2143 const struct usba_udc_config *udc_config; 2144 2145 match = of_match_node(atmel_udc_dt_ids, np); 2146 if (!match) 2147 return ERR_PTR(-EINVAL); 2148 2149 udc_config = match->data; 2150 udc->ep_prealloc = udc_config->ep_prealloc; 2151 udc->errata = udc_config->errata; 2152 if (udc->errata) { 2153 pp = of_find_matching_node_and_match(NULL, atmel_pmc_dt_ids, 2154 NULL); 2155 if (!pp) 2156 return ERR_PTR(-ENODEV); 2157 2158 udc->pmc = syscon_node_to_regmap(pp); 2159 of_node_put(pp); 2160 if (IS_ERR(udc->pmc)) 2161 return ERR_CAST(udc->pmc); 2162 } 2163 2164 udc->num_ep = 0; 2165 2166 udc->vbus_pin = devm_gpiod_get_optional(&pdev->dev, "atmel,vbus", 2167 GPIOD_IN); 2168 if (IS_ERR(udc->vbus_pin)) 2169 return ERR_CAST(udc->vbus_pin); 2170 2171 if (fifo_mode == 0) { 2172 udc->num_ep = udc_config->num_ep; 2173 } else { 2174 udc->num_ep = usba_config_fifo_table(udc); 2175 } 2176 2177 eps = devm_kcalloc(&pdev->dev, udc->num_ep, sizeof(struct usba_ep), 2178 GFP_KERNEL); 2179 if (!eps) 2180 return ERR_PTR(-ENOMEM); 2181 2182 udc->gadget.ep0 = &eps[0].ep; 2183 2184 INIT_LIST_HEAD(&eps[0].ep.ep_list); 2185 2186 i = 0; 2187 while (i < udc->num_ep) { 2188 const struct usba_ep_config *ep_cfg = &udc_config->config[i]; 2189 2190 ep = &eps[i]; 2191 2192 ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : i; 2193 2194 /* Only the first EP is 64 bytes */ 2195 if (ep->index == 0) 2196 ep->fifo_size = 64; 2197 else 2198 ep->fifo_size = 1024; 2199 2200 if (fifo_mode) { 2201 if (ep->fifo_size < udc->fifo_cfg[i].fifo_size) 2202 dev_warn(&pdev->dev, 2203 "Using default max fifo-size value\n"); 2204 else 2205 ep->fifo_size = udc->fifo_cfg[i].fifo_size; 2206 } 2207 2208 ep->nr_banks = ep_cfg->nr_banks; 2209 if (fifo_mode) { 2210 if (ep->nr_banks < udc->fifo_cfg[i].nr_banks) 2211 dev_warn(&pdev->dev, 2212 "Using default max nb-banks value\n"); 2213 else 2214 ep->nr_banks = udc->fifo_cfg[i].nr_banks; 2215 } 2216 2217 ep->can_dma = ep_cfg->can_dma; 2218 ep->can_isoc = ep_cfg->can_isoc; 2219 2220 sprintf(ep->name, "ep%d", ep->index); 2221 ep->ep.name = ep->name; 2222 2223 ep->ep_regs = udc->regs + USBA_EPT_BASE(i); 2224 ep->dma_regs = udc->regs + USBA_DMA_BASE(i); 2225 ep->fifo = udc->fifo + USBA_FIFO_BASE(i); 2226 ep->ep.ops = &usba_ep_ops; 2227 usb_ep_set_maxpacket_limit(&ep->ep, ep->fifo_size); 2228 ep->udc = udc; 2229 INIT_LIST_HEAD(&ep->queue); 2230 2231 if (ep->index == 0) { 2232 ep->ep.caps.type_control = true; 2233 } else { 2234 ep->ep.caps.type_iso = ep->can_isoc; 2235 ep->ep.caps.type_bulk = true; 2236 ep->ep.caps.type_int = true; 2237 } 2238 2239 ep->ep.caps.dir_in = true; 2240 ep->ep.caps.dir_out = true; 2241 2242 if (fifo_mode != 0) { 2243 /* 2244 * Generate ept_cfg based on FIFO size and 2245 * banks number 2246 */ 2247 if (ep->fifo_size <= 8) 2248 ep->ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8); 2249 else 2250 /* LSB is bit 1, not 0 */ 2251 ep->ept_cfg = 2252 USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3); 2253 2254 ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks); 2255 } 2256 2257 if (i) 2258 list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); 2259 2260 i++; 2261 } 2262 2263 if (i == 0) { 2264 dev_err(&pdev->dev, "of_probe: no endpoint specified\n"); 2265 ret = -EINVAL; 2266 goto err; 2267 } 2268 2269 return eps; 2270 err: 2271 return ERR_PTR(ret); 2272 } 2273 2274 static int usba_udc_probe(struct platform_device *pdev) 2275 { 2276 struct resource *res; 2277 struct clk *pclk, *hclk; 2278 struct usba_udc *udc; 2279 int irq, ret, i; 2280 2281 udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL); 2282 if (!udc) 2283 return -ENOMEM; 2284 2285 udc->gadget = usba_gadget_template; 2286 INIT_LIST_HEAD(&udc->gadget.ep_list); 2287 2288 udc->regs = devm_platform_get_and_ioremap_resource(pdev, CTRL_IOMEM_ID, &res); 2289 if (IS_ERR(udc->regs)) 2290 return PTR_ERR(udc->regs); 2291 dev_info(&pdev->dev, "MMIO registers at %pR mapped at %p\n", 2292 res, udc->regs); 2293 2294 udc->fifo = devm_platform_get_and_ioremap_resource(pdev, FIFO_IOMEM_ID, &res); 2295 if (IS_ERR(udc->fifo)) 2296 return PTR_ERR(udc->fifo); 2297 dev_info(&pdev->dev, "FIFO at %pR mapped at %p\n", res, udc->fifo); 2298 2299 irq = platform_get_irq(pdev, 0); 2300 if (irq < 0) 2301 return irq; 2302 2303 pclk = devm_clk_get(&pdev->dev, "pclk"); 2304 if (IS_ERR(pclk)) 2305 return PTR_ERR(pclk); 2306 hclk = devm_clk_get(&pdev->dev, "hclk"); 2307 if (IS_ERR(hclk)) 2308 return PTR_ERR(hclk); 2309 2310 spin_lock_init(&udc->lock); 2311 mutex_init(&udc->vbus_mutex); 2312 udc->pdev = pdev; 2313 udc->pclk = pclk; 2314 udc->hclk = hclk; 2315 2316 platform_set_drvdata(pdev, udc); 2317 2318 /* Make sure we start from a clean slate */ 2319 ret = clk_prepare_enable(pclk); 2320 if (ret) { 2321 dev_err(&pdev->dev, "Unable to enable pclk, aborting.\n"); 2322 return ret; 2323 } 2324 2325 usba_writel(udc, CTRL, USBA_DISABLE_MASK); 2326 clk_disable_unprepare(pclk); 2327 2328 udc->usba_ep = atmel_udc_of_init(pdev, udc); 2329 2330 toggle_bias(udc, 0); 2331 2332 if (IS_ERR(udc->usba_ep)) 2333 return PTR_ERR(udc->usba_ep); 2334 2335 ret = devm_request_irq(&pdev->dev, irq, usba_udc_irq, 0, 2336 "atmel_usba_udc", udc); 2337 if (ret) { 2338 dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n", 2339 irq, ret); 2340 return ret; 2341 } 2342 udc->irq = irq; 2343 2344 if (udc->vbus_pin) { 2345 irq_set_status_flags(gpiod_to_irq(udc->vbus_pin), IRQ_NOAUTOEN); 2346 ret = devm_request_threaded_irq(&pdev->dev, 2347 gpiod_to_irq(udc->vbus_pin), NULL, 2348 usba_vbus_irq_thread, USBA_VBUS_IRQFLAGS, 2349 "atmel_usba_udc", udc); 2350 if (ret) { 2351 udc->vbus_pin = NULL; 2352 dev_warn(&udc->pdev->dev, 2353 "failed to request vbus irq; " 2354 "assuming always on\n"); 2355 } 2356 } 2357 2358 ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget); 2359 if (ret) 2360 return ret; 2361 device_init_wakeup(&pdev->dev, 1); 2362 2363 usba_init_debugfs(udc); 2364 for (i = 1; i < udc->num_ep; i++) 2365 usba_ep_init_debugfs(udc, &udc->usba_ep[i]); 2366 2367 return 0; 2368 } 2369 2370 static void usba_udc_remove(struct platform_device *pdev) 2371 { 2372 struct usba_udc *udc; 2373 int i; 2374 2375 udc = platform_get_drvdata(pdev); 2376 2377 device_init_wakeup(&pdev->dev, 0); 2378 usb_del_gadget_udc(&udc->gadget); 2379 2380 for (i = 1; i < udc->num_ep; i++) 2381 usba_ep_cleanup_debugfs(&udc->usba_ep[i]); 2382 usba_cleanup_debugfs(udc); 2383 } 2384 2385 #ifdef CONFIG_PM_SLEEP 2386 static int usba_udc_suspend(struct device *dev) 2387 { 2388 struct usba_udc *udc = dev_get_drvdata(dev); 2389 2390 /* Not started */ 2391 if (!udc->driver) 2392 return 0; 2393 2394 mutex_lock(&udc->vbus_mutex); 2395 2396 if (!device_may_wakeup(dev)) { 2397 udc->suspended = false; 2398 usba_stop(udc); 2399 goto out; 2400 } 2401 2402 /* 2403 * Device may wake up. We stay clocked if we failed 2404 * to request vbus irq, assuming always on. 2405 */ 2406 if (udc->vbus_pin) { 2407 /* FIXME: right to stop here...??? */ 2408 usba_stop(udc); 2409 enable_irq_wake(gpiod_to_irq(udc->vbus_pin)); 2410 } 2411 2412 enable_irq_wake(udc->irq); 2413 2414 out: 2415 mutex_unlock(&udc->vbus_mutex); 2416 return 0; 2417 } 2418 2419 static int usba_udc_resume(struct device *dev) 2420 { 2421 struct usba_udc *udc = dev_get_drvdata(dev); 2422 2423 /* Not started */ 2424 if (!udc->driver) 2425 return 0; 2426 2427 if (device_may_wakeup(dev)) { 2428 if (udc->vbus_pin) 2429 disable_irq_wake(gpiod_to_irq(udc->vbus_pin)); 2430 2431 disable_irq_wake(udc->irq); 2432 } 2433 2434 /* If Vbus is present, enable the controller and wait for reset */ 2435 mutex_lock(&udc->vbus_mutex); 2436 udc->vbus_prev = vbus_is_present(udc); 2437 if (udc->vbus_prev) 2438 usba_start(udc); 2439 mutex_unlock(&udc->vbus_mutex); 2440 2441 return 0; 2442 } 2443 #endif 2444 2445 static SIMPLE_DEV_PM_OPS(usba_udc_pm_ops, usba_udc_suspend, usba_udc_resume); 2446 2447 static struct platform_driver udc_driver = { 2448 .probe = usba_udc_probe, 2449 .remove_new = usba_udc_remove, 2450 .driver = { 2451 .name = "atmel_usba_udc", 2452 .pm = &usba_udc_pm_ops, 2453 .of_match_table = atmel_udc_dt_ids, 2454 }, 2455 }; 2456 module_platform_driver(udc_driver); 2457 2458 MODULE_DESCRIPTION("Atmel USBA UDC driver"); 2459 MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); 2460 MODULE_LICENSE("GPL"); 2461 MODULE_ALIAS("platform:atmel_usba_udc"); 2462