1 /* 2 * Copyright (C) 2004 by Thomas Rathbone, HP Labs 3 * Copyright (C) 2005 by Ivan Kokshaysky 4 * Copyright (C) 2006 by SAN People 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 */ 11 12 #ifndef AT91_UDC_H 13 #define AT91_UDC_H 14 15 /* 16 * USB Device Port (UDP) registers. 17 * Based on AT91RM9200 datasheet revision E. 18 */ 19 20 #define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */ 21 #define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */ 22 #define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */ 23 #define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */ 24 25 #define AT91_UDP_GLB_STAT 0x04 /* Global State Register */ 26 #define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */ 27 #define AT91_UDP_CONFG (1 << 1) /* Configured */ 28 #define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */ 29 #define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */ 30 #define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */ 31 32 #define AT91_UDP_FADDR 0x08 /* Function Address Register */ 33 #define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */ 34 #define AT91_UDP_FEN (1 << 8) /* Function Enable */ 35 36 #define AT91_UDP_IER 0x10 /* Interrupt Enable Register */ 37 #define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */ 38 #define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */ 39 40 #define AT91_UDP_ISR 0x1c /* Interrupt Status Register */ 41 #define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */ 42 #define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */ 43 #define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */ 44 #define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */ 45 #define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */ 46 #define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrupt Status */ 47 #define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status [AT91RM9200 only] */ 48 49 #define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */ 50 #define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */ 51 52 #define AT91_UDP_CSR(n) (0x30+((n)*4)) /* Endpoint Control/Status Registers 0-7 */ 53 #define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */ 54 #define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */ 55 #define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */ 56 #define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */ 57 #define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */ 58 #define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */ 59 #define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */ 60 #define AT91_UDP_DIR (1 << 7) /* Transfer Direction */ 61 #define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */ 62 #define AT91_UDP_EPTYPE_CTRL (0 << 8) 63 #define AT91_UDP_EPTYPE_ISO_OUT (1 << 8) 64 #define AT91_UDP_EPTYPE_BULK_OUT (2 << 8) 65 #define AT91_UDP_EPTYPE_INT_OUT (3 << 8) 66 #define AT91_UDP_EPTYPE_ISO_IN (5 << 8) 67 #define AT91_UDP_EPTYPE_BULK_IN (6 << 8) 68 #define AT91_UDP_EPTYPE_INT_IN (7 << 8) 69 #define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */ 70 #define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */ 71 #define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */ 72 73 #define AT91_UDP_FDR(n) (0x50+((n)*4)) /* Endpoint FIFO Data Registers 0-7 */ 74 75 #define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */ 76 #define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */ 77 #define AT91_UDP_TXVC_PUON (1 << 9) /* PullUp On [AT91SAM9260 only] */ 78 79 /*-------------------------------------------------------------------------*/ 80 81 /* 82 * controller driver data structures 83 */ 84 85 #define NUM_ENDPOINTS 6 86 87 /* 88 * hardware won't disable bus reset, or resume while the controller 89 * is suspended ... watching suspend helps keep the logic symmetric. 90 */ 91 #define MINIMUS_INTERRUPTUS \ 92 (AT91_UDP_ENDBUSRES | AT91_UDP_RXRSM | AT91_UDP_RXSUSP) 93 94 struct at91_ep { 95 struct usb_ep ep; 96 struct list_head queue; 97 struct at91_udc *udc; 98 void __iomem *creg; 99 100 unsigned maxpacket:16; 101 u8 int_mask; 102 unsigned is_pingpong:1; 103 104 unsigned stopped:1; 105 unsigned is_in:1; 106 unsigned is_iso:1; 107 unsigned fifo_bank:1; 108 }; 109 110 struct at91_udc_caps { 111 int (*init)(struct at91_udc *udc); 112 void (*pullup)(struct at91_udc *udc, int is_on); 113 }; 114 115 /* 116 * driver is non-SMP, and just blocks IRQs whenever it needs 117 * access protection for chip registers or driver state 118 */ 119 struct at91_udc { 120 struct usb_gadget gadget; 121 struct at91_ep ep[NUM_ENDPOINTS]; 122 struct usb_gadget_driver *driver; 123 const struct at91_udc_caps *caps; 124 unsigned vbus:1; 125 unsigned enabled:1; 126 unsigned clocked:1; 127 unsigned suspended:1; 128 unsigned req_pending:1; 129 unsigned wait_for_addr_ack:1; 130 unsigned wait_for_config_ack:1; 131 unsigned active_suspend:1; 132 u8 addr; 133 struct at91_udc_data board; 134 struct clk *iclk, *fclk; 135 struct platform_device *pdev; 136 struct proc_dir_entry *pde; 137 void __iomem *udp_baseaddr; 138 int udp_irq; 139 spinlock_t lock; 140 struct timer_list vbus_timer; 141 struct work_struct vbus_timer_work; 142 struct regmap *matrix; 143 }; 144 145 static inline struct at91_udc *to_udc(struct usb_gadget *g) 146 { 147 return container_of(g, struct at91_udc, gadget); 148 } 149 150 struct at91_request { 151 struct usb_request req; 152 struct list_head queue; 153 }; 154 155 /*-------------------------------------------------------------------------*/ 156 157 #ifdef VERBOSE_DEBUG 158 # define VDBG DBG 159 #else 160 # define VDBG(stuff...) do{}while(0) 161 #endif 162 163 #ifdef PACKET_TRACE 164 # define PACKET VDBG 165 #else 166 # define PACKET(stuff...) do{}while(0) 167 #endif 168 169 #define ERR(stuff...) pr_err("udc: " stuff) 170 #define WARNING(stuff...) pr_warning("udc: " stuff) 171 #define INFO(stuff...) pr_info("udc: " stuff) 172 #define DBG(stuff...) pr_debug("udc: " stuff) 173 174 #endif 175 176